qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: qemu-devel@nongnu.org
Cc: Aurelien Jarno <aurelien@aurel32.net>
Subject: [Qemu-devel] [PATCH 07/26] tcg: rewrite tcg_reg_alloc_mov()
Date: Fri, 19 Oct 2012 23:38:56 +0200	[thread overview]
Message-ID: <1350682755-31635-8-git-send-email-aurelien@aurel32.net> (raw)
In-Reply-To: <1350682755-31635-1-git-send-email-aurelien@aurel32.net>

Now that the liveness analysis provides more information, rewrite
tcg_reg_alloc_mov(). This changes the behaviour about propagating
constants and memory accesses. We now take the assumption that once
a value is loaded into a register (from memory or from a constant),
it's better to keep it there than to reload it later. This assumption
is now always almost correct given that we are now sure the
corresponding temp is going to be used later (otherwise it would have
been synchronized and marked as dead already). The assumption is wrong
if one of the op after clobbers some registers including the one
of the holding the temp (this can be avoided by allocating clobbered
registers last, which is what most TCG target do), or in case of lack
of available register.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 tcg/tcg.c |  106 +++++++++++++++++++++++++++++++++++--------------------------
 1 file changed, 61 insertions(+), 45 deletions(-)

diff --git a/tcg/tcg.c b/tcg/tcg.c
index 6586385..b219a6d 100644
--- a/tcg/tcg.c
+++ b/tcg/tcg.c
@@ -1714,64 +1714,80 @@ static void tcg_reg_alloc_mov(TCGContext *s, const TCGOpDef *def,
                               const TCGArg *args, uint16_t dead_args,
                               uint8_t sync_args)
 {
+    TCGRegSet allocated_regs;
     TCGTemp *ts, *ots;
-    int reg;
-    const TCGArgConstraint *arg_ct;
+    const TCGArgConstraint *arg_ct, *oarg_ct;
 
+    tcg_regset_set(allocated_regs, s->reserved_regs);
     ots = &s->temps[args[0]];
     ts = &s->temps[args[1]];
-    arg_ct = &def->args_ct[0];
+    oarg_ct = &def->args_ct[0];
+    arg_ct = &def->args_ct[1];
+
+    /* If the source value is not in a register, and we're going to be
+       forced to have it in a register in order to perform the copy,
+       then copy the SOURCE value into its own register first.  That way
+       we don't have to reload SOURCE the next time it is used. */
+    if (((NEED_SYNC_ARG(0) || ots->fixed_reg) && ts->val_type != TEMP_VAL_REG)
+        || ts->val_type == TEMP_VAL_MEM) {
+        ts->reg = tcg_reg_alloc(s, arg_ct->u.regs, allocated_regs);
+        if (ts->val_type == TEMP_VAL_MEM) {
+            tcg_out_ld(s, ts->type, ts->reg, ts->mem_reg, ts->mem_offset);
+            ts->mem_coherent = 1;
+        } else if (ts->val_type == TEMP_VAL_CONST) {
+            tcg_out_movi(s, ts->type, ts->reg, ts->val);
+        }
+        s->reg_to_temp[ts->reg] = args[1];
+        ts->val_type = TEMP_VAL_REG;
+    }
 
-    /* XXX: always mark arg dead if IS_DEAD_ARG(1) */
-    if (ts->val_type == TEMP_VAL_REG) {
+    if (IS_DEAD_ARG(0) && !ots->fixed_reg) {
+        /* mov to a non-saved dead register makes no sense (even with
+           liveness analysis disabled). */
+        assert(NEED_SYNC_ARG(0));
+        /* The code above should have moved the temp to a register. */
+        assert(ts->val_type == TEMP_VAL_REG);
+        if (!ots->mem_allocated) {
+            temp_allocate_frame(s, args[0]);
+        }
+        tcg_out_st(s, ots->type, ts->reg, ots->mem_reg, ots->mem_offset);
+        if (IS_DEAD_ARG(1)) {
+            temp_dead(s, args[1]);
+        }
+        temp_dead(s, args[0]);
+    } else if (ts->val_type == TEMP_VAL_CONST) {
+        /* propagate constant */
+        if (ots->val_type == TEMP_VAL_REG) {
+            s->reg_to_temp[ots->reg] = -1;
+        }
+        ots->val_type = TEMP_VAL_CONST;
+        ots->val = ts->val;
+    } else {
+        /* The code in the first if block should have moved the
+           temp to a register. */
+        assert(ts->val_type == TEMP_VAL_REG);
         if (IS_DEAD_ARG(1) && !ts->fixed_reg && !ots->fixed_reg) {
             /* the mov can be suppressed */
-            if (ots->val_type == TEMP_VAL_REG)
+            if (ots->val_type == TEMP_VAL_REG) {
                 s->reg_to_temp[ots->reg] = -1;
-            reg = ts->reg;
+            }
+            ots->reg = ts->reg;
             temp_dead(s, args[1]);
         } else {
-            if (ots->val_type == TEMP_VAL_REG) {
-                reg = ots->reg;
-            } else {
-                reg = tcg_reg_alloc(s, arg_ct->u.regs, s->reserved_regs);
-            }
-            if (ts->reg != reg) {
-                tcg_out_mov(s, ots->type, reg, ts->reg);
+            if (ots->val_type != TEMP_VAL_REG) {
+                /* When allocating a new register, make sure to not spill the
+                   input one. */
+                tcg_regset_set_reg(allocated_regs, ts->reg);
+                ots->reg = tcg_reg_alloc(s, oarg_ct->u.regs, allocated_regs);
             }
+            tcg_out_mov(s, ots->type, ots->reg, ts->reg);
         }
-    } else if (ts->val_type == TEMP_VAL_MEM) {
-        if (ots->val_type == TEMP_VAL_REG) {
-            reg = ots->reg;
-        } else {
-            reg = tcg_reg_alloc(s, arg_ct->u.regs, s->reserved_regs);
+        ots->val_type = TEMP_VAL_REG;
+        ots->mem_coherent = 0;
+        s->reg_to_temp[ots->reg] = args[0];
+        if (NEED_SYNC_ARG(0)) {
+            tcg_reg_sync(s, ots->reg);
         }
-        tcg_out_ld(s, ts->type, reg, ts->mem_reg, ts->mem_offset);
-    } else if (ts->val_type == TEMP_VAL_CONST) {
-        if (ots->fixed_reg) {
-            reg = ots->reg;
-            tcg_out_movi(s, ots->type, reg, ts->val);
-        } else {
-            /* propagate constant */
-            if (ots->val_type == TEMP_VAL_REG)
-                s->reg_to_temp[ots->reg] = -1;
-            ots->val_type = TEMP_VAL_CONST;
-            ots->val = ts->val;
-            if (NEED_SYNC_ARG(0)) {
-                temp_sync(s, args[0], s->reserved_regs);
-            }
-            return;
-        }
-    } else {
-        tcg_abort();
-    }
-    s->reg_to_temp[reg] = args[0];
-    ots->reg = reg;
-    ots->val_type = TEMP_VAL_REG;
-    ots->mem_coherent = 0;
-
-    if (NEED_SYNC_ARG(0)) {
-        tcg_reg_sync(s, reg);
     }
 }
 
-- 
1.7.10.4

  parent reply	other threads:[~2012-10-19 21:39 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-19 21:38 [Qemu-devel] [PATCH v3 00/26] tcg: rework liveness analysis and register allocator Aurelien Jarno
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 01/26] tcg: add temp_dead() Aurelien Jarno
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 02/26] tcg: add tcg_reg_sync() Aurelien Jarno
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 03/26] tcg: add temp_sync() Aurelien Jarno
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 04/26] tcg: sync output arguments on liveness request Aurelien Jarno
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 05/26] tcg: rework liveness analysis Aurelien Jarno
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 06/26] tcg: improve tcg_reg_alloc_movi() Aurelien Jarno
2012-10-19 21:38 ` Aurelien Jarno [this message]
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 08/26] tcg: always mark dead input arguments as dead Aurelien Jarno
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 09/26] tcg: start with local temps in TEMP_VAL_MEM state Aurelien Jarno
2012-10-19 21:38 ` [Qemu-devel] [PATCH v3 10/26] tcg: don't explicitly save globals and temps Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 11/26] tcg: fix some op flags Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 12/26] tcg: forbid ld/st function to modify globals Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 13/26] tcg: synchronize globals for ops with side effects Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 14/26] tcg: rework TCG helper flags Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 15/26] target-alpha: rename " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 16/26] target-arm: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 17/26] target-cris: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 18/26] target-i386: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 19/26] target-microblaze: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 20/26] target-mips: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 21/26] target-ppc: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 22/26] target-s390x: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 23/26] target-sh4: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 24/26] target-sparc: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 25/26] target-xtensa: " Aurelien Jarno
2012-10-19 21:39 ` [Qemu-devel] [PATCH v3 26/26] tcg: remove compatiblity call flags Aurelien Jarno
2012-10-21 20:35 ` [Qemu-devel] [PATCH v3 00/26] tcg: rework liveness analysis and register allocator Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350682755-31635-8-git-send-email-aurelien@aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).