From: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: Stefan Hajnoczi <stefanha@gmail.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
Avi Kivity <avi@redhat.com>,
Anthony Liguori <anthony@codemonkey.ws>,
Jan Kiszka <jan.kiszka@siemens.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [patch v4 15/16] e1000: introduce unmap() to fix unplug issue
Date: Mon, 22 Oct 2012 17:23:58 +0800 [thread overview]
Message-ID: <1350897839-29593-16-git-send-email-pingfank@linux.vnet.ibm.com> (raw)
In-Reply-To: <1350897839-29593-1-git-send-email-pingfank@linux.vnet.ibm.com>
When device uninit(), we should ensure that it is not used by any
subsystem. We can acheive this by two solution:
1.sync on big lock in uninit() function
This is more easy, but it require that big lock can be recusive,
because uninit() can be called by iothread or mmio-dispatch.
2.introduce unmap() as a sync point for all subsystem.
This patch adpots solotion 2.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
---
hw/e1000.c | 26 ++++++++++++++++++++++----
1 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/hw/e1000.c b/hw/e1000.c
index 0b4fce5..72c2324 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -168,7 +168,14 @@ set_phy_ctrl(E1000State *s, int index, uint16_t val)
e1000_link_down(s);
s->phy_reg[PHY_STATUS] &= ~MII_SR_AUTONEG_COMPLETE;
DBGOUT(PHY, "Start link auto negotiation\n");
- qemu_mod_timer(s->autoneg_timer, qemu_get_clock_ms(vm_clock) + 500);
+
+ qemu_mutex_unlock(&s->e1000_lock);
+ qemu_mutex_lock_iothread();
+ if (DEVICE(s)->state < DEV_STATE_STOPPING) {
+ qemu_mod_timer(s->autoneg_timer, qemu_get_clock_ms(vm_clock) + 500);
+ }
+ qemu_mutex_unlock_iothread();
+ qemu_mutex_lock(&s->e1000_lock);
}
}
@@ -467,7 +474,9 @@ e1000_send_packet(E1000State *s, const uint8_t *buf, int size)
} else {
qemu_mutex_unlock(&s->e1000_lock);
qemu_mutex_lock_iothread();
- qemu_send_packet(&s->nic->nc, buf, size);
+ if (DEVICE(s)->state < DEV_STATE_STOPPING) {
+ qemu_send_packet(&s->nic->nc, buf, size);
+ }
qemu_mutex_unlock_iothread();
qemu_mutex_lock(&s->e1000_lock);
}
@@ -1221,6 +1230,16 @@ e1000_mmio_setup(E1000State *d)
}
static void
+pci_e1000_unmap(PCIDevice *p)
+{
+ E1000State *d = DO_UPCAST(E1000State, dev, p);
+
+ DEVICE(d)->state = DEV_STATE_STOPPING;
+ qemu_del_timer(d->autoneg_timer);
+ qemu_del_net_client(&d->nic->nc);
+}
+
+static void
e1000_cleanup(NetClientState *nc)
{
E1000State *s = DO_UPCAST(NICState, nc, nc)->opaque;
@@ -1233,11 +1252,9 @@ pci_e1000_uninit(PCIDevice *dev)
{
E1000State *d = DO_UPCAST(E1000State, dev, dev);
- qemu_del_timer(d->autoneg_timer);
qemu_free_timer(d->autoneg_timer);
memory_region_destroy(&d->mmio);
memory_region_destroy(&d->io);
- qemu_del_net_client(&d->nic->nc);
}
static NetClientInfo net_e1000_info = {
@@ -1314,6 +1331,7 @@ static void e1000_class_init(ObjectClass *klass, void *data)
k->init = pci_e1000_init;
k->exit = pci_e1000_uninit;
+ k->unmap = pci_e1000_unmap;
k->romfile = "pxe-e1000.rom";
k->vendor_id = PCI_VENDOR_ID_INTEL;
k->device_id = E1000_DEVID;
--
1.7.4.4
next prev parent reply other threads:[~2012-10-22 9:25 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-22 9:23 [Qemu-devel] [patch v4 00/16] push mmio dispatch out of big lock Liu Ping Fan
2012-10-22 9:23 ` [Qemu-devel] [patch v4 01/16] atomic: introduce atomic operations Liu Ping Fan
2012-10-22 9:23 ` [Qemu-devel] [patch v4 02/16] qom: apply atomic on object's refcount Liu Ping Fan
2012-10-22 9:23 ` [Qemu-devel] [patch v4 03/16] hotplug: introduce qdev_unplug_complete() to remove device from views Liu Ping Fan
2012-10-22 9:23 ` [Qemu-devel] [patch v4 04/16] pci: remove pci device from mem view when unplug Liu Ping Fan
2012-10-22 9:23 ` [Qemu-devel] [patch v4 05/16] memory: introduce ref, unref interface for MemoryRegionOps Liu Ping Fan
2012-10-22 9:38 ` Avi Kivity
2012-10-23 11:51 ` Paolo Bonzini
2012-10-23 11:55 ` Avi Kivity
2012-10-23 11:57 ` Paolo Bonzini
2012-10-23 12:02 ` Avi Kivity
2012-10-23 12:06 ` Paolo Bonzini
2012-10-23 12:15 ` Avi Kivity
2012-10-23 12:32 ` Paolo Bonzini
2012-10-23 14:49 ` Avi Kivity
2012-10-23 15:26 ` Paolo Bonzini
2012-10-23 16:09 ` Avi Kivity
2012-10-24 7:29 ` Paolo Bonzini
2012-10-25 16:28 ` Avi Kivity
2012-10-26 15:05 ` Paolo Bonzini
2012-10-23 12:04 ` Jan Kiszka
2012-10-23 12:12 ` Paolo Bonzini
2012-10-23 12:16 ` Jan Kiszka
2012-10-23 12:28 ` Avi Kivity
2012-10-23 12:40 ` Jan Kiszka
2012-10-23 14:37 ` Avi Kivity
2012-10-22 9:23 ` [Qemu-devel] [patch v4 06/16] memory: document ref, unref interface Liu Ping Fan
2012-10-22 9:23 ` [Qemu-devel] [patch v4 07/16] memory: make mmio dispatch able to be out of biglock Liu Ping Fan
2012-10-23 12:12 ` Jan Kiszka
2012-10-23 12:36 ` Avi Kivity
2012-10-24 6:31 ` liu ping fan
2012-10-24 6:56 ` liu ping fan
2012-10-25 8:57 ` Avi Kivity
2012-10-22 9:23 ` [Qemu-devel] [patch v4 08/16] QemuThread: make QemuThread as tls to store extra info Liu Ping Fan
2012-10-22 9:30 ` Jan Kiszka
2012-10-22 17:13 ` Peter Maydell
2012-10-23 5:58 ` liu ping fan
2012-10-23 11:48 ` Paolo Bonzini
2012-10-23 11:50 ` Peter Maydell
2012-10-23 11:51 ` Jan Kiszka
2012-10-23 12:00 ` Paolo Bonzini
2012-10-23 12:27 ` Peter Maydell
2012-11-18 10:02 ` Brad Smith
2012-11-18 16:14 ` Paolo Bonzini
2012-11-18 16:15 ` Paolo Bonzini
2012-10-22 9:23 ` [Qemu-devel] [patch v4 09/16] memory: introduce mmio request pending to anti nested DMA Liu Ping Fan
2012-10-22 10:28 ` Avi Kivity
2012-10-23 12:38 ` Gleb Natapov
2012-10-24 6:31 ` liu ping fan
2012-10-22 9:23 ` [Qemu-devel] [patch v4 10/16] memory: introduce lock ops for MemoryRegionOps Liu Ping Fan
2012-10-22 10:30 ` Avi Kivity
2012-10-23 5:53 ` liu ping fan
2012-10-23 8:53 ` Jan Kiszka
2012-10-22 9:23 ` [Qemu-devel] [patch v4 11/16] vcpu: push mmio dispatcher out of big lock Liu Ping Fan
2012-10-22 10:31 ` Avi Kivity
2012-10-22 10:36 ` Jan Kiszka
2012-10-22 9:23 ` [Qemu-devel] [patch v4 12/16] e1000: apply fine lock on e1000 Liu Ping Fan
2012-10-22 10:37 ` Avi Kivity
2012-10-23 9:04 ` Jan Kiszka
2012-10-24 6:31 ` liu ping fan
2012-10-24 7:17 ` Jan Kiszka
2012-10-25 9:01 ` Avi Kivity
2012-10-25 9:31 ` Jan Kiszka
2012-10-25 16:21 ` Avi Kivity
2012-10-25 16:39 ` Jan Kiszka
2012-10-25 17:02 ` Avi Kivity
2012-10-25 18:48 ` Jan Kiszka
2012-10-29 5:24 ` liu ping fan
2012-10-24 7:29 ` liu ping fan
2012-10-25 13:34 ` Jan Kiszka
2012-10-25 16:23 ` Avi Kivity
2012-10-25 16:41 ` Jan Kiszka
2012-10-25 17:03 ` Avi Kivity
2012-10-29 5:24 ` liu ping fan
2012-10-31 7:03 ` Jan Kiszka
2012-10-22 9:23 ` [Qemu-devel] [patch v4 13/16] e1000: add busy flag to anti broken device state Liu Ping Fan
2012-10-22 10:40 ` Avi Kivity
2012-10-23 5:52 ` liu ping fan
2012-10-23 9:06 ` Avi Kivity
2012-10-23 9:07 ` Jan Kiszka
2012-10-23 9:32 ` liu ping fan
2012-10-23 9:37 ` Avi Kivity
2012-10-24 6:36 ` liu ping fan
2012-10-25 8:55 ` Avi Kivity
2012-10-25 9:00 ` Peter Maydell
2012-10-25 9:04 ` Avi Kivity
2012-10-26 3:05 ` liu ping fan
2012-10-26 3:08 ` liu ping fan
2012-10-26 10:25 ` Jan Kiszka
2012-10-29 5:24 ` liu ping fan
2012-10-29 7:50 ` Peter Maydell
2012-10-22 9:23 ` [Qemu-devel] [patch v4 14/16] qdev: introduce stopping state Liu Ping Fan
2012-10-22 9:23 ` Liu Ping Fan [this message]
2012-10-22 9:23 ` [Qemu-devel] [patch v4 16/16] e1000: implement MemoryRegionOps's ref&lock interface Liu Ping Fan
2012-10-25 14:04 ` [Qemu-devel] [patch v4 00/16] push mmio dispatch out of big lock Peter Maydell
2012-10-25 16:44 ` Jan Kiszka
2012-10-25 17:07 ` Avi Kivity
2012-10-25 17:13 ` Peter Maydell
2012-10-25 18:13 ` Marcelo Tosatti
2012-10-25 19:00 ` Jan Kiszka
2012-10-25 19:06 ` Peter Maydell
2012-10-29 15:24 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350897839-29593-16-git-send-email-pingfank@linux.vnet.ibm.com \
--to=pingfank@linux.vnet.ibm.com \
--cc=anthony@codemonkey.ws \
--cc=avi@redhat.com \
--cc=jan.kiszka@siemens.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).