* [Qemu-devel] [RFC v3 1/8] linux-headers: Add ARM KVM headers (not for upstream)
2012-10-23 10:50 [Qemu-devel] [RFC v3 0/8] QEMU: Support KVM on ARM Peter Maydell
@ 2012-10-23 10:50 ` Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 2/8] ARM: KVM: Add support for KVM on ARM architecture Peter Maydell
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2012-10-23 10:50 UTC (permalink / raw)
To: qemu-devel
Cc: kvm, patches, Marcelo Tosatti, kvmarm, Blue Swirl, Avi Kivity,
Andreas Färber
This commit adds the ARM KVM headers. This is not to go to QEMU
upstream -- the correct path there is that the KVM code will be
committed to a mainline upstream kernel, and then upstream QEMU
can do a bulk header update from the upstream kernel, which will
allow us to drop this temporary commit.
This is the result of running update-headers on Christoffer's
kvm-arm-v1 branch (commit fa4b37c). It includes the new
interrupt delivery ABI, the switch to ONE_REG for core
and coprocessor registers, and the VFP register definitions.
It currently also includes some minor non-ARM header changes
which hopefully will have made it into QEMU upstream by the time
we submit this for merging.
---
| 125 ++++++++++++++++++++++++++++++++++
| 1 +
| 4 ++
| 59 ++++++++++++++++
| 6 +-
| 18 +----
| 17 +++++
| 43 ++++++++++--
| 6 +-
| 6 +-
| 6 +-
| 6 +-
12 files changed, 258 insertions(+), 39 deletions(-)
create mode 100644 linux-headers/asm-arm/kvm.h
create mode 100644 linux-headers/asm-arm/kvm_para.h
create mode 100644 linux-headers/asm-generic/kvm_para.h
--git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h
new file mode 100644
index 0000000..fb41608
--- /dev/null
+++ b/linux-headers/asm-arm/kvm.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_H__
+#define __ARM_KVM_H__
+
+#include <asm/types.h>
+
+#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_IRQ_LINE
+
+#define KVM_REG_SIZE(id) \
+ (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
+
+struct kvm_regs {
+ __u32 usr_regs[15]; /* R0_usr - R14_usr */
+ __u32 svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */
+ __u32 abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */
+ __u32 und_regs[3]; /* SP_und, LR_und, SPSR_und */
+ __u32 irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */
+ __u32 fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */
+ __u32 pc; /* The program counter (r15) */
+ __u32 cpsr; /* The guest CPSR */
+};
+
+/* Supported Processor Types */
+#define KVM_ARM_TARGET_CORTEX_A15 0
+#define KVM_ARM_NUM_TARGETS 1
+
+struct kvm_vcpu_init {
+ __u32 target;
+ __u32 features[7];
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+};
+
+struct kvm_guest_debug_arch {
+};
+
+struct kvm_debug_exit_arch {
+};
+
+struct kvm_sync_regs {
+};
+
+struct kvm_arch_memory_slot {
+};
+
+/* If you need to interpret the index values, here is the key: */
+#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000
+#define KVM_REG_ARM_COPROC_SHIFT 16
+#define KVM_REG_ARM_32_OPC2_MASK 0x0000000000000007
+#define KVM_REG_ARM_32_OPC2_SHIFT 0
+#define KVM_REG_ARM_OPC1_MASK 0x0000000000000078
+#define KVM_REG_ARM_OPC1_SHIFT 3
+#define KVM_REG_ARM_CRM_MASK 0x0000000000000780
+#define KVM_REG_ARM_CRM_SHIFT 7
+#define KVM_REG_ARM_32_CRN_MASK 0x0000000000007800
+#define KVM_REG_ARM_32_CRN_SHIFT 11
+
+/* Normal registers are mapped as coprocessor 16. */
+#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / 4)
+
+/* Some registers need more space to represent values. */
+#define KVM_REG_ARM_DEMUX (0x0011 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_DEMUX_ID_MASK 0x000000000000FF00
+#define KVM_REG_ARM_DEMUX_ID_SHIFT 8
+#define KVM_REG_ARM_DEMUX_ID_CCSIDR (0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT)
+#define KVM_REG_ARM_DEMUX_VAL_MASK 0x00000000000000FF
+#define KVM_REG_ARM_DEMUX_VAL_SHIFT 0
+
+/* VFP registers: we could overload CP10 like ARM does, but that's ugly. */
+#define KVM_REG_ARM_VFP (0x0012 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_VFP_MASK 0x000000000000FFFF
+#define KVM_REG_ARM_VFP_BASE_REG 0x0
+#define KVM_REG_ARM_VFP_FPSID 0x1000
+#define KVM_REG_ARM_VFP_FPSCR 0x1001
+#define KVM_REG_ARM_VFP_MVFR1 0x1006
+#define KVM_REG_ARM_VFP_MVFR0 0x1007
+#define KVM_REG_ARM_VFP_FPEXC 0x1008
+#define KVM_REG_ARM_VFP_FPINST 0x1009
+#define KVM_REG_ARM_VFP_FPINST2 0x100A
+
+
+/* KVM_IRQ_LINE irq field index values */
+#define KVM_ARM_IRQ_TYPE_SHIFT 24
+#define KVM_ARM_IRQ_TYPE_MASK 0xff
+#define KVM_ARM_IRQ_VCPU_SHIFT 16
+#define KVM_ARM_IRQ_VCPU_MASK 0xff
+#define KVM_ARM_IRQ_NUM_SHIFT 0
+#define KVM_ARM_IRQ_NUM_MASK 0xffff
+
+/* irq_type field */
+#define KVM_ARM_IRQ_TYPE_CPU 0
+#define KVM_ARM_IRQ_TYPE_SPI 1
+#define KVM_ARM_IRQ_TYPE_PPI 2
+
+/* out-of-kernel GIC cpu interrupt injection irq_number field */
+#define KVM_ARM_IRQ_CPU_IRQ 0
+#define KVM_ARM_IRQ_CPU_FIQ 1
+
+/* Highest supported SPI, from VGIC_NR_IRQS */
+#define KVM_ARM_IRQ_GIC_MAX 127
+
+#endif /* __ARM_KVM_H__ */
--git a/linux-headers/asm-arm/kvm_para.h b/linux-headers/asm-arm/kvm_para.h
new file mode 100644
index 0000000..14fab8f
--- /dev/null
+++ b/linux-headers/asm-arm/kvm_para.h
@@ -0,0 +1 @@
+#include <asm-generic/kvm_para.h>
--git a/linux-headers/asm-generic/kvm_para.h b/linux-headers/asm-generic/kvm_para.h
new file mode 100644
index 0000000..486f0af
--- /dev/null
+++ b/linux-headers/asm-generic/kvm_para.h
@@ -0,0 +1,4 @@
+/*
+ * There isn't anything here, but the file must not be empty or patch
+ * will delete it.
+ */
--git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h
index 1bea4d8..b89ae4d 100644
--- a/linux-headers/asm-powerpc/kvm.h
+++ b/linux-headers/asm-powerpc/kvm.h
@@ -221,6 +221,12 @@ struct kvm_sregs {
__u32 dbsr; /* KVM_SREGS_E_UPDATE_DBSR */
__u32 dbcr[3];
+ /*
+ * iac/dac registers are 64bit wide, while this API
+ * interface provides only lower 32 bits on 64 bit
+ * processors. ONE_REG interface is added for 64bit
+ * iac/dac registers.
+ */
__u32 iac[4];
__u32 dac[2];
__u32 dvc[2];
@@ -326,5 +332,58 @@ struct kvm_book3e_206_tlb_params {
};
#define KVM_REG_PPC_HIOR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x1)
+#define KVM_REG_PPC_IAC1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x2)
+#define KVM_REG_PPC_IAC2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x3)
+#define KVM_REG_PPC_IAC3 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x4)
+#define KVM_REG_PPC_IAC4 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x5)
+#define KVM_REG_PPC_DAC1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x6)
+#define KVM_REG_PPC_DAC2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x7)
+#define KVM_REG_PPC_DABR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8)
+#define KVM_REG_PPC_DSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x9)
+#define KVM_REG_PPC_PURR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa)
+#define KVM_REG_PPC_SPURR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb)
+#define KVM_REG_PPC_DAR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc)
+#define KVM_REG_PPC_DSISR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xd)
+#define KVM_REG_PPC_AMR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xe)
+#define KVM_REG_PPC_UAMOR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xf)
+
+#define KVM_REG_PPC_MMCR0 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x10)
+#define KVM_REG_PPC_MMCR1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x11)
+#define KVM_REG_PPC_MMCRA (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x12)
+
+#define KVM_REG_PPC_PMC1 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x18)
+#define KVM_REG_PPC_PMC2 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x19)
+#define KVM_REG_PPC_PMC3 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1a)
+#define KVM_REG_PPC_PMC4 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1b)
+#define KVM_REG_PPC_PMC5 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1c)
+#define KVM_REG_PPC_PMC6 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1d)
+#define KVM_REG_PPC_PMC7 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1e)
+#define KVM_REG_PPC_PMC8 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1f)
+
+/* 32 floating-point registers */
+#define KVM_REG_PPC_FPR0 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x20)
+#define KVM_REG_PPC_FPR(n) (KVM_REG_PPC_FPR0 + (n))
+#define KVM_REG_PPC_FPR31 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x3f)
+
+/* 32 VMX/Altivec vector registers */
+#define KVM_REG_PPC_VR0 (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x40)
+#define KVM_REG_PPC_VR(n) (KVM_REG_PPC_VR0 + (n))
+#define KVM_REG_PPC_VR31 (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x5f)
+
+/* 32 double-width FP registers for VSX */
+/* High-order halves overlap with FP regs */
+#define KVM_REG_PPC_VSR0 (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x60)
+#define KVM_REG_PPC_VSR(n) (KVM_REG_PPC_VSR0 + (n))
+#define KVM_REG_PPC_VSR31 (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x7f)
+
+/* FP and vector status/control registers */
+#define KVM_REG_PPC_FPSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x80)
+#define KVM_REG_PPC_VSCR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x81)
+
+/* Virtual processor areas */
+/* For SLB & DTL, address in high (first) half, length in low half */
+#define KVM_REG_PPC_VPA_ADDR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x82)
+#define KVM_REG_PPC_VPA_SLB (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x83)
+#define KVM_REG_PPC_VPA_DTL (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x84)
#endif /* __LINUX_KVM_POWERPC_H */
--git a/linux-headers/asm-powerpc/kvm_para.h b/linux-headers/asm-powerpc/kvm_para.h
index c047a84..5e04383 100644
--- a/linux-headers/asm-powerpc/kvm_para.h
+++ b/linux-headers/asm-powerpc/kvm_para.h
@@ -17,8 +17,8 @@
* Authors: Hollis Blanchard <hollisb@us.ibm.com>
*/
-#ifndef __POWERPC_KVM_PARA_H__
-#define __POWERPC_KVM_PARA_H__
+#ifndef _UAPI__POWERPC_KVM_PARA_H__
+#define _UAPI__POWERPC_KVM_PARA_H__
#include <linux/types.h>
@@ -87,4 +87,4 @@ struct kvm_vcpu_arch_shared {
#define KVM_MAGIC_FEAT_MAS0_TO_SPRG7 (1 << 1)
-#endif /* __POWERPC_KVM_PARA_H__ */
+#endif /* _UAPI__POWERPC_KVM_PARA_H__ */
--git a/linux-headers/asm-s390/kvm_para.h b/linux-headers/asm-s390/kvm_para.h
index 870051f..14fab8f 100644
--- a/linux-headers/asm-s390/kvm_para.h
+++ b/linux-headers/asm-s390/kvm_para.h
@@ -1,17 +1 @@
-/*
- * definition for paravirtual devices on s390
- *
- * Copyright IBM Corp. 2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2 only)
- * as published by the Free Software Foundation.
- *
- * Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
- */
-
-#ifndef __S390_KVM_PARA_H
-#define __S390_KVM_PARA_H
-
-
-#endif /* __S390_KVM_PARA_H */
+#include <asm-generic/kvm_para.h>
--git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
index 246617e..a65ec29 100644
--- a/linux-headers/asm-x86/kvm.h
+++ b/linux-headers/asm-x86/kvm.h
@@ -9,6 +9,22 @@
#include <linux/types.h>
#include <linux/ioctl.h>
+#define DE_VECTOR 0
+#define DB_VECTOR 1
+#define BP_VECTOR 3
+#define OF_VECTOR 4
+#define BR_VECTOR 5
+#define UD_VECTOR 6
+#define NM_VECTOR 7
+#define DF_VECTOR 8
+#define TS_VECTOR 10
+#define NP_VECTOR 11
+#define SS_VECTOR 12
+#define GP_VECTOR 13
+#define PF_VECTOR 14
+#define MF_VECTOR 16
+#define MC_VECTOR 18
+
/* Select x86 specific features in <linux/kvm.h> */
#define __KVM_HAVE_PIT
#define __KVM_HAVE_IOAPIC
@@ -25,6 +41,7 @@
#define __KVM_HAVE_DEBUGREGS
#define __KVM_HAVE_XSAVE
#define __KVM_HAVE_XCRS
+#define __KVM_HAVE_READONLY_MEM
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index 4b9e575..4f309db 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -101,9 +101,13 @@ struct kvm_userspace_memory_region {
__u64 userspace_addr; /* start of the userspace allocated memory */
};
-/* for kvm_memory_region::flags */
-#define KVM_MEM_LOG_DIRTY_PAGES 1UL
-#define KVM_MEMSLOT_INVALID (1UL << 1)
+/*
+ * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
+ * other bits are reserved for kvm internal use which are defined in
+ * include/linux/kvm_host.h.
+ */
+#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0)
+#define KVM_MEM_READONLY (1UL << 1)
/* for KVM_IRQ_LINE */
struct kvm_irq_level {
@@ -111,6 +115,7 @@ struct kvm_irq_level {
* ACPI gsi notion of irq.
* For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
* For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
+ * For ARM: See Documentation/virtual/kvm/api.txt
*/
union {
__u32 irq;
@@ -163,6 +168,7 @@ struct kvm_pit_config {
#define KVM_EXIT_OSI 18
#define KVM_EXIT_PAPR_HCALL 19
#define KVM_EXIT_S390_UCONTROL 20
+#define KVM_EXIT_WATCHDOG 21
/* For KVM_EXIT_INTERNAL_ERROR */
#define KVM_INTERNAL_ERROR_EMULATION 1
@@ -473,6 +479,8 @@ struct kvm_ppc_smmu_info {
struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
};
+#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0)
+
#define KVMIO 0xAE
/* machine type bits, to be used as argument to KVM_CREATE_VM */
@@ -618,6 +626,11 @@ struct kvm_ppc_smmu_info {
#define KVM_CAP_PPC_GET_SMMU_INFO 78
#define KVM_CAP_S390_COW 79
#define KVM_CAP_PPC_ALLOC_HTAB 80
+#ifdef __KVM_HAVE_READONLY_MEM
+#define KVM_CAP_READONLY_MEM 81
+#endif
+#define KVM_CAP_IRQFD_RESAMPLE 82
+#define KVM_CAP_PPC_BOOKE_WATCHDOG 83
#ifdef KVM_CAP_IRQ_ROUTING
@@ -683,12 +696,21 @@ struct kvm_xen_hvm_config {
#endif
#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
+/*
+ * Available with KVM_CAP_IRQFD_RESAMPLE
+ *
+ * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
+ * the irqfd to operate in resampling mode for level triggered interrupt
+ * emlation. See Documentation/virtual/kvm/api.txt.
+ */
+#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
struct kvm_irqfd {
__u32 fd;
__u32 gsi;
__u32 flags;
- __u8 pad[20];
+ __u32 resamplefd;
+ __u8 pad[16];
};
struct kvm_clock_data {
@@ -738,6 +760,11 @@ struct kvm_dirty_tlb {
#define KVM_REG_SIZE_U512 0x0060000000000000ULL
#define KVM_REG_SIZE_U1024 0x0070000000000000ULL
+struct kvm_reg_list {
+ __u64 n; /* number of regs */
+ __u64 reg[0];
+};
+
struct kvm_one_reg {
__u64 id;
__u64 addr;
@@ -831,6 +858,9 @@ struct kvm_s390_ucas_mapping {
#define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info)
/* Available with KVM_CAP_PPC_ALLOC_HTAB */
#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32)
+#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce)
+/* Available with KVM_CAP_RMA */
+#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma)
/*
* ioctls for vcpu fds
@@ -894,9 +924,6 @@ struct kvm_s390_ucas_mapping {
/* Available with KVM_CAP_XCRS */
#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs)
#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs)
-#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce)
-/* Available with KVM_CAP_RMA */
-#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma)
/* Available with KVM_CAP_SW_TLB */
#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb)
/* Available with KVM_CAP_ONE_REG */
@@ -904,6 +931,8 @@ struct kvm_s390_ucas_mapping {
#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg)
/* VM is being stopped by host */
#define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad)
+#define KVM_ARM_VCPU_INIT _IOW(KVMIO, 0xae, struct kvm_vcpu_init)
+#define KVM_GET_REG_LIST _IOWR(KVMIO, 0xb0, struct kvm_reg_list)
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
--git a/linux-headers/linux/kvm_para.h b/linux-headers/linux/kvm_para.h
index 7bdcf93..cea2c5c 100644
--- a/linux-headers/linux/kvm_para.h
+++ b/linux-headers/linux/kvm_para.h
@@ -1,5 +1,5 @@
-#ifndef __LINUX_KVM_PARA_H
-#define __LINUX_KVM_PARA_H
+#ifndef _UAPI__LINUX_KVM_PARA_H
+#define _UAPI__LINUX_KVM_PARA_H
/*
* This header file provides a method for making a hypercall to the host
@@ -25,4 +25,4 @@
*/
#include <asm/kvm_para.h>
-#endif /* __LINUX_KVM_PARA_H */
+#endif /* _UAPI__LINUX_KVM_PARA_H */
--git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index f787b72..4758d1b 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -8,8 +8,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef VFIO_H
-#define VFIO_H
+#ifndef _UAPIVFIO_H
+#define _UAPIVFIO_H
#include <linux/types.h>
#include <linux/ioctl.h>
@@ -365,4 +365,4 @@ struct vfio_iommu_type1_dma_unmap {
#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
-#endif /* VFIO_H */
+#endif /* _UAPIVFIO_H */
--git a/linux-headers/linux/virtio_config.h b/linux-headers/linux/virtio_config.h
index 4f51d8f..b7cda39 100644
--- a/linux-headers/linux/virtio_config.h
+++ b/linux-headers/linux/virtio_config.h
@@ -1,5 +1,5 @@
-#ifndef _LINUX_VIRTIO_CONFIG_H
-#define _LINUX_VIRTIO_CONFIG_H
+#ifndef _UAPI_LINUX_VIRTIO_CONFIG_H
+#define _UAPI_LINUX_VIRTIO_CONFIG_H
/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
* anyone can use the definitions to implement compatible drivers/servers.
*
@@ -51,4 +51,4 @@
* suppressed them? */
#define VIRTIO_F_NOTIFY_ON_EMPTY 24
-#endif /* _LINUX_VIRTIO_CONFIG_H */
+#endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
--git a/linux-headers/linux/virtio_ring.h b/linux-headers/linux/virtio_ring.h
index 1b333e2..921694a 100644
--- a/linux-headers/linux/virtio_ring.h
+++ b/linux-headers/linux/virtio_ring.h
@@ -1,5 +1,5 @@
-#ifndef _LINUX_VIRTIO_RING_H
-#define _LINUX_VIRTIO_RING_H
+#ifndef _UAPI_LINUX_VIRTIO_RING_H
+#define _UAPI_LINUX_VIRTIO_RING_H
/* An interface for efficient virtio implementation, currently for use by KVM
* and lguest, but hopefully others soon. Do NOT change this since it will
* break existing servers and clients.
@@ -160,4 +160,4 @@ static __inline__ int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old
return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
}
-#endif /* _LINUX_VIRTIO_RING_H */
+#endif /* _UAPI_LINUX_VIRTIO_RING_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [RFC v3 2/8] ARM: KVM: Add support for KVM on ARM architecture
2012-10-23 10:50 [Qemu-devel] [RFC v3 0/8] QEMU: Support KVM on ARM Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 1/8] linux-headers: Add ARM KVM headers (not for upstream) Peter Maydell
@ 2012-10-23 10:50 ` Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 3/8] ARM KVM: save and load VFP registers from kernel Peter Maydell
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2012-10-23 10:50 UTC (permalink / raw)
To: qemu-devel
Cc: kvm, patches, Marcelo Tosatti, kvmarm, Blue Swirl, Avi Kivity,
Andreas Färber
From: Christoffer Dall <cdall@cs.columbia.edu>
Add basic support for KVM on ARM architecture.
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
[PMM: Minor tweaks and code cleanup, switch to ONE_REG]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm_pic.c | 26 ++++
target-arm/Makefile.objs | 1 +
target-arm/cpu.h | 1 +
target-arm/helper.c | 2 +-
target-arm/kvm.c | 327 ++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 356 insertions(+), 1 deletion(-)
create mode 100644 target-arm/kvm.c
diff --git a/hw/arm_pic.c b/hw/arm_pic.c
index ffb4d41..874bbaf 100644
--- a/hw/arm_pic.c
+++ b/hw/arm_pic.c
@@ -9,6 +9,7 @@
#include "hw.h"
#include "arm-misc.h"
+#include "kvm.h"
/* Input 0 is IRQ and input 1 is FIQ. */
static void arm_pic_cpu_handler(void *opaque, int irq, int level)
@@ -34,7 +35,32 @@ static void arm_pic_cpu_handler(void *opaque, int irq, int level)
}
}
+static void kvm_arm_pic_cpu_handler(void *opaque, int irq, int level)
+{
+#ifdef CONFIG_KVM
+ ARMCPU *cpu = opaque;
+ CPUARMState *env = &cpu->env;
+ int kvm_irq = KVM_ARM_IRQ_TYPE_CPU << KVM_ARM_IRQ_TYPE_SHIFT;
+
+ switch (irq) {
+ case ARM_PIC_CPU_IRQ:
+ kvm_irq |= KVM_ARM_IRQ_CPU_IRQ;
+ break;
+ case ARM_PIC_CPU_FIQ:
+ kvm_irq |= KVM_ARM_IRQ_CPU_FIQ;
+ break;
+ default:
+ hw_error("kvm_arm_pic_cpu_handler: Bad interrupt line %d\n", irq);
+ }
+ kvm_irq |= env->cpu_index << KVM_ARM_IRQ_VCPU_SHIFT;
+ kvm_set_irq(kvm_state, kvm_irq, level ? 1 : 0);
+#endif
+}
+
qemu_irq *arm_pic_init_cpu(ARMCPU *cpu)
{
+ if (kvm_enabled()) {
+ return qemu_allocate_irqs(kvm_arm_pic_cpu_handler, cpu, 2);
+ }
return qemu_allocate_irqs(arm_pic_cpu_handler, cpu, 2);
}
diff --git a/target-arm/Makefile.objs b/target-arm/Makefile.objs
index b6f1a9e..d89b57c 100644
--- a/target-arm/Makefile.objs
+++ b/target-arm/Makefile.objs
@@ -1,4 +1,5 @@
obj-y += arm-semi.o
obj-$(CONFIG_SOFTMMU) += machine.o
+obj-$(CONFIG_KVM) += kvm.o
obj-y += translate.o op_helper.o helper.o cpu.o
obj-y += neon_helper.o iwmmxt_helper.o
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index ff4de10..8c7e574 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -236,6 +236,7 @@ ARMCPU *cpu_arm_init(const char *cpu_model);
void arm_translate_init(void);
int cpu_arm_exec(CPUARMState *s);
void do_interrupt(CPUARMState *);
+int bank_number(CPUARMState *env, int mode);
void switch_mode(CPUARMState *, int);
uint32_t do_arm_semihosting(CPUARMState *env);
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 58340bd..f62f3da 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1619,7 +1619,7 @@ uint32_t HELPER(get_r13_banked)(CPUARMState *env, uint32_t mode)
#else
/* Map CPU modes onto saved register banks. */
-static inline int bank_number(CPUARMState *env, int mode)
+int bank_number(CPUARMState *env, int mode)
{
switch (mode) {
case ARM_CPU_MODE_USR:
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
new file mode 100644
index 0000000..f80c707
--- /dev/null
+++ b/target-arm/kvm.c
@@ -0,0 +1,327 @@
+/*
+ * ARM implementation of KVM hooks
+ *
+ * Copyright Christoffer Dall 2009-2010
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+
+#include <linux/kvm.h>
+
+#include "qemu-common.h"
+#include "qemu-timer.h"
+#include "sysemu.h"
+#include "kvm.h"
+#include "cpu.h"
+#include "hw/arm-misc.h"
+
+const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
+ KVM_CAP_LAST_INFO
+};
+
+int kvm_arch_init(KVMState *s)
+{
+ /* For ARM interrupt delivery is always asynchronous,
+ * whether we are using an in-kernel VGIC or not.
+ */
+ kvm_async_interrupts_allowed = true;
+ return 0;
+}
+
+int kvm_arch_init_vcpu(CPUARMState *env)
+{
+ struct kvm_vcpu_init init;
+
+ init.target = KVM_ARM_TARGET_CORTEX_A15;
+ memset(init.features, 0, sizeof(init.features));
+ return kvm_vcpu_ioctl(env, KVM_ARM_VCPU_INIT, &init);
+}
+
+typedef struct Reg {
+ uint64_t id;
+ int offset;
+} Reg;
+
+#define COREREG(KERNELNAME, QEMUFIELD) \
+ { \
+ KVM_REG_ARM | KVM_REG_SIZE_U32 | \
+ KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(KERNELNAME), \
+ offsetof(CPUARMState, QEMUFIELD) \
+ }
+
+#define CP15REG(CRN, CRM, OPC1, OPC2, QEMUFIELD) \
+ { \
+ KVM_REG_ARM | KVM_REG_SIZE_U32 | \
+ (15 << KVM_REG_ARM_COPROC_SHIFT) | \
+ ((CRN) << KVM_REG_ARM_32_CRN_SHIFT) | \
+ ((CRM) << KVM_REG_ARM_CRM_SHIFT) | \
+ ((OPC1) << KVM_REG_ARM_OPC1_SHIFT) | \
+ ((OPC2) << KVM_REG_ARM_32_OPC2_SHIFT), \
+ offsetof(CPUARMState, QEMUFIELD) \
+ }
+
+static const Reg regs[] = {
+ /* R0_usr .. R14_usr */
+ COREREG(usr_regs[0], regs[0]),
+ COREREG(usr_regs[1], regs[1]),
+ COREREG(usr_regs[2], regs[2]),
+ COREREG(usr_regs[3], regs[3]),
+ COREREG(usr_regs[4], regs[4]),
+ COREREG(usr_regs[5], regs[5]),
+ COREREG(usr_regs[6], regs[6]),
+ COREREG(usr_regs[7], regs[7]),
+ COREREG(usr_regs[8], usr_regs[0]),
+ COREREG(usr_regs[9], usr_regs[1]),
+ COREREG(usr_regs[10], usr_regs[2]),
+ COREREG(usr_regs[11], usr_regs[3]),
+ COREREG(usr_regs[12], usr_regs[4]),
+ COREREG(usr_regs[13], banked_r13[0]),
+ COREREG(usr_regs[14], banked_r14[0]),
+ /* R13, R14, SPSR for SVC, ABT, UND, IRQ banks */
+ COREREG(svc_regs[0], banked_r13[1]),
+ COREREG(svc_regs[1], banked_r14[1]),
+ COREREG(svc_regs[2], banked_spsr[1]),
+ COREREG(abt_regs[0], banked_r13[2]),
+ COREREG(abt_regs[1], banked_r14[2]),
+ COREREG(abt_regs[2], banked_spsr[2]),
+ COREREG(und_regs[0], banked_r13[3]),
+ COREREG(und_regs[1], banked_r14[3]),
+ COREREG(und_regs[2], banked_spsr[3]),
+ COREREG(irq_regs[0], banked_r13[4]),
+ COREREG(irq_regs[1], banked_r14[4]),
+ COREREG(irq_regs[2], banked_spsr[4]),
+ /* R8_fiq .. R14_fiq and SPSR_fiq */
+ COREREG(fiq_regs[0], fiq_regs[0]),
+ COREREG(fiq_regs[1], fiq_regs[1]),
+ COREREG(fiq_regs[2], fiq_regs[2]),
+ COREREG(fiq_regs[3], fiq_regs[3]),
+ COREREG(fiq_regs[4], fiq_regs[4]),
+ COREREG(fiq_regs[0], banked_r13[5]),
+ COREREG(fiq_regs[1], banked_r14[5]),
+ COREREG(fiq_regs[2], banked_spsr[5]),
+ /* R15 */
+ COREREG(pc, regs[15]),
+ /* A non-comprehensive set of cp15 registers.
+ * TODO: drive this from the cp_regs hashtable instead.
+ */
+ CP15REG(1, 0, 0, 0, cp15.c1_sys), /* SCTLR */
+ CP15REG(2, 0, 0, 2, cp15.c2_control), /* TTBCR */
+ CP15REG(3, 0, 0, 0, cp15.c3), /* DACR */
+};
+
+int kvm_arch_put_registers(CPUARMState *env, int level)
+{
+ struct kvm_one_reg r;
+ int mode, bn;
+ int ret, i;
+ uint32_t cpsr;
+ uint64_t ttbr;
+
+ /* Make sure the banked regs are properly set */
+ mode = env->uncached_cpsr & CPSR_M;
+ bn = bank_number(env, mode);
+ if (mode == ARM_CPU_MODE_FIQ) {
+ memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
+ } else {
+ memcpy(env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t));
+ }
+ env->banked_r13[bn] = env->regs[13];
+ env->banked_r14[bn] = env->regs[14];
+ env->banked_spsr[bn] = env->spsr;
+
+ /* Now we can safely copy stuff down to the kernel */
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
+ r.id = regs[i].id;
+ r.addr = (uintptr_t)(env) + regs[i].offset;
+ ret = kvm_vcpu_ioctl(env, KVM_SET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+ }
+
+ /* Special cases which aren't a single CPUARMState field */
+ cpsr = cpsr_read(env);
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U32 |
+ KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(cpsr);
+ r.addr = (uintptr_t)(&cpsr);
+ ret = kvm_vcpu_ioctl(env, KVM_SET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+
+ /* TTBR0: cp15 crm=2 opc1=0 */
+ ttbr = ((uint64_t)env->cp15.c2_base0_hi << 32) | env->cp15.c2_base0;
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) |
+ (2 << KVM_REG_ARM_CRM_SHIFT) | (0 << KVM_REG_ARM_OPC1_SHIFT);
+ r.addr = (uintptr_t)(&ttbr);
+ ret = kvm_vcpu_ioctl(env, KVM_SET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+
+ /* TTBR1: cp15 crm=2 opc1=1 */
+ ttbr = ((uint64_t)env->cp15.c2_base1_hi << 32) | env->cp15.c2_base1;
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) |
+ (2 << KVM_REG_ARM_CRM_SHIFT) | (1 << KVM_REG_ARM_OPC1_SHIFT);
+ r.addr = (uintptr_t)(&ttbr);
+ ret = kvm_vcpu_ioctl(env, KVM_SET_ONE_REG, &r);
+
+ return ret;
+}
+
+int kvm_arch_get_registers(CPUARMState *env)
+{
+ struct kvm_one_reg r;
+ int mode, bn;
+ int ret, i;
+ uint32_t cpsr;
+ uint64_t ttbr;
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
+ r.id = regs[i].id;
+ r.addr = (uintptr_t)(env) + regs[i].offset;
+ ret = kvm_vcpu_ioctl(env, KVM_GET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+ }
+
+ /* Special cases which aren't a single CPUARMState field */
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U32 |
+ KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(cpsr);
+ r.addr = (uintptr_t)(&cpsr);
+ ret = kvm_vcpu_ioctl(env, KVM_GET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+ cpsr_write(env, cpsr, 0xffffffff);
+
+ /* TTBR0: cp15 crm=2 opc1=0 */
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) |
+ (2 << KVM_REG_ARM_CRM_SHIFT) | (0 << KVM_REG_ARM_OPC1_SHIFT);
+ r.addr = (uintptr_t)(&ttbr);
+ ret = kvm_vcpu_ioctl(env, KVM_GET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+ env->cp15.c2_base0_hi = ttbr >> 32;
+ env->cp15.c2_base0 = ttbr;
+
+ /* TTBR1: cp15 crm=2 opc1=1 */
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) |
+ (2 << KVM_REG_ARM_CRM_SHIFT) | (1 << KVM_REG_ARM_OPC1_SHIFT);
+ r.addr = (uintptr_t)(&ttbr);
+ ret = kvm_vcpu_ioctl(env, KVM_GET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+ env->cp15.c2_base1_hi = ttbr >> 32;
+ env->cp15.c2_base1 = ttbr;
+
+ /* Make sure the current mode regs are properly set */
+ mode = env->uncached_cpsr & CPSR_M;
+ bn = bank_number(env, mode);
+ if (mode == ARM_CPU_MODE_FIQ) {
+ memcpy(env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t));
+ } else {
+ memcpy(env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t));
+ }
+ env->regs[13] = env->banked_r13[bn];
+ env->regs[14] = env->banked_r14[bn];
+ env->spsr = env->banked_spsr[bn];
+
+ /* The main GET_ONE_REG loop above set c2_control, but we need to
+ * update some extra cached precomputed values too.
+ * When this is driven from the cp_regs hashtable then this ugliness
+ * can disappear because we'll use the access function which sets
+ * these values automatically.
+ */
+ env->cp15.c2_mask = ~(0xffffffffu >> env->cp15.c2_control);
+ env->cp15.c2_base_mask = ~(0x3fffu >> env->cp15.c2_control);
+
+ return 0;
+}
+
+void kvm_arch_pre_run(CPUARMState *env, struct kvm_run *run)
+{
+}
+
+void kvm_arch_post_run(CPUARMState *env, struct kvm_run *run)
+{
+}
+
+int kvm_arch_handle_exit(CPUARMState *env, struct kvm_run *run)
+{
+ int ret = 0;
+
+ return ret;
+}
+
+void kvm_arch_reset_vcpu(CPUARMState *env)
+{
+}
+
+bool kvm_arch_stop_on_emulation_error(CPUARMState *env)
+{
+ return true;
+}
+
+int kvm_arch_process_async_events(CPUARMState *env)
+{
+ return 0;
+}
+
+int kvm_arch_on_sigbus_vcpu(CPUARMState *env, int code, void *addr)
+{
+ return 1;
+}
+
+int kvm_arch_on_sigbus(int code, void *addr)
+{
+ return 1;
+}
+
+void kvm_arch_update_guest_debug(CPUARMState *env, struct kvm_guest_debug *dbg)
+{
+ qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
+}
+
+int kvm_arch_insert_sw_breakpoint(CPUARMState *env,
+ struct kvm_sw_breakpoint *bp)
+{
+ qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
+ return -EINVAL;
+}
+
+int kvm_arch_insert_hw_breakpoint(target_ulong addr,
+ target_ulong len, int type)
+{
+ qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
+ return -EINVAL;
+}
+
+int kvm_arch_remove_hw_breakpoint(target_ulong addr,
+ target_ulong len, int type)
+{
+ qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
+ return -EINVAL;
+}
+
+int kvm_arch_remove_sw_breakpoint(CPUARMState *env,
+ struct kvm_sw_breakpoint *bp)
+{
+ qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
+ return -EINVAL;
+}
+
+void kvm_arch_remove_all_hw_breakpoints(void)
+{
+ qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
+}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [RFC v3 3/8] ARM KVM: save and load VFP registers from kernel
2012-10-23 10:50 [Qemu-devel] [RFC v3 0/8] QEMU: Support KVM on ARM Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 1/8] linux-headers: Add ARM KVM headers (not for upstream) Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 2/8] ARM: KVM: Add support for KVM on ARM architecture Peter Maydell
@ 2012-10-23 10:50 ` Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 4/8] hw/arm_gic: Add presave/postload hooks Peter Maydell
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2012-10-23 10:50 UTC (permalink / raw)
To: qemu-devel
Cc: kvm, patches, Marcelo Tosatti, kvmarm, Blue Swirl, Avi Kivity,
Andreas Färber
Add support for saving and restoring VFP register state from the
kernel. This includes a check that the KVM-created CPU has full
VFP support (as the TCG Cortex-A15 model always does), since for
the moment ARM QEMU doesn't have any way to tweak optional features
on created CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/kvm.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 75 insertions(+), 3 deletions(-)
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
index f80c707..f7d2235 100644
--- a/target-arm/kvm.c
+++ b/target-arm/kvm.c
@@ -38,10 +38,28 @@ int kvm_arch_init(KVMState *s)
int kvm_arch_init_vcpu(CPUARMState *env)
{
struct kvm_vcpu_init init;
+ int ret;
+ uint64_t v;
+ struct kvm_one_reg r;
init.target = KVM_ARM_TARGET_CORTEX_A15;
memset(init.features, 0, sizeof(init.features));
- return kvm_vcpu_ioctl(env, KVM_ARM_VCPU_INIT, &init);
+ ret = kvm_vcpu_ioctl(env, KVM_ARM_VCPU_INIT, &init);
+ if (ret) {
+ return ret;
+ }
+ /* Query the kernel to make sure it supports 32 VFP
+ * registers: QEMU's "cortex-a15" CPU is always a
+ * VFP-D32 core. The simplest way to do this is just
+ * to attempt to read register d31.
+ */
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP | 31;
+ r.addr = (uintptr_t)(&v);
+ ret = kvm_vcpu_ioctl(env, KVM_GET_ONE_REG, &r);
+ if (ret == ENOENT) {
+ return EINVAL;
+ }
+ return ret;
}
typedef struct Reg {
@@ -67,6 +85,13 @@ typedef struct Reg {
offsetof(CPUARMState, QEMUFIELD) \
}
+#define VFPSYSREG(R) \
+ { \
+ KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP | \
+ KVM_REG_ARM_VFP_##R, \
+ offsetof(CPUARMState, vfp.xregs[ARM_VFP_##R]) \
+ }
+
static const Reg regs[] = {
/* R0_usr .. R14_usr */
COREREG(usr_regs[0], regs[0]),
@@ -114,6 +139,13 @@ static const Reg regs[] = {
CP15REG(1, 0, 0, 0, cp15.c1_sys), /* SCTLR */
CP15REG(2, 0, 0, 2, cp15.c2_control), /* TTBCR */
CP15REG(3, 0, 0, 0, cp15.c3), /* DACR */
+ /* VFP system registers */
+ VFPSYSREG(FPSID),
+ VFPSYSREG(MVFR1),
+ VFPSYSREG(MVFR0),
+ VFPSYSREG(FPEXC),
+ VFPSYSREG(FPINST),
+ VFPSYSREG(FPINST2),
};
int kvm_arch_put_registers(CPUARMState *env, int level)
@@ -121,7 +153,7 @@ int kvm_arch_put_registers(CPUARMState *env, int level)
struct kvm_one_reg r;
int mode, bn;
int ret, i;
- uint32_t cpsr;
+ uint32_t cpsr, fpscr;
uint64_t ttbr;
/* Make sure the banked regs are properly set */
@@ -172,6 +204,26 @@ int kvm_arch_put_registers(CPUARMState *env, int level)
(2 << KVM_REG_ARM_CRM_SHIFT) | (1 << KVM_REG_ARM_OPC1_SHIFT);
r.addr = (uintptr_t)(&ttbr);
ret = kvm_vcpu_ioctl(env, KVM_SET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+
+ /* VFP registers */
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP;
+ for (i = 0; i < 32; i++) {
+ r.addr = (uintptr_t)(&env->vfp.regs[i]);
+ ret = kvm_vcpu_ioctl(env, KVM_SET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+ r.id++;
+ }
+
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP |
+ KVM_REG_ARM_VFP_FPSCR;
+ fpscr = vfp_get_fpscr(env);
+ r.addr = (uintptr_t)&fpscr;
+ ret = kvm_vcpu_ioctl(env, KVM_SET_ONE_REG, &r);
return ret;
}
@@ -181,7 +233,7 @@ int kvm_arch_get_registers(CPUARMState *env)
struct kvm_one_reg r;
int mode, bn;
int ret, i;
- uint32_t cpsr;
+ uint32_t cpsr, fpscr;
uint64_t ttbr;
for (i = 0; i < ARRAY_SIZE(regs); i++) {
@@ -246,6 +298,26 @@ int kvm_arch_get_registers(CPUARMState *env)
env->cp15.c2_mask = ~(0xffffffffu >> env->cp15.c2_control);
env->cp15.c2_base_mask = ~(0x3fffu >> env->cp15.c2_control);
+ /* VFP registers */
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP;
+ for (i = 0; i < 32; i++) {
+ r.addr = (uintptr_t)(&env->vfp.regs[i]);
+ ret = kvm_vcpu_ioctl(env, KVM_GET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+ r.id++;
+ }
+
+ r.id = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP |
+ KVM_REG_ARM_VFP_FPSCR;
+ r.addr = (uintptr_t)&fpscr;
+ ret = kvm_vcpu_ioctl(env, KVM_GET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+ vfp_set_fpscr(env, fpscr);
+
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [RFC v3 4/8] hw/arm_gic: Add presave/postload hooks
2012-10-23 10:50 [Qemu-devel] [RFC v3 0/8] QEMU: Support KVM on ARM Peter Maydell
` (2 preceding siblings ...)
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 3/8] ARM KVM: save and load VFP registers from kernel Peter Maydell
@ 2012-10-23 10:50 ` Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 5/8] linux-headers: update with VGIC related headers (not for upstream) Peter Maydell
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2012-10-23 10:50 UTC (permalink / raw)
To: qemu-devel
Cc: kvm, patches, Marcelo Tosatti, kvmarm, Blue Swirl, Avi Kivity,
Andreas Färber
Add presave/postload hooks to the ARM GIC common base class.
These will be used by the KVM in-kernel GIC subclass to sync
state between kernel and userspace when migrating.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
---
hw/arm_gic_common.c | 10 ++++++++++
hw/arm_gic_internal.h | 2 ++
2 files changed, 12 insertions(+)
diff --git a/hw/arm_gic_common.c b/hw/arm_gic_common.c
index 8369309..961b44c 100644
--- a/hw/arm_gic_common.c
+++ b/hw/arm_gic_common.c
@@ -23,9 +23,14 @@
static void gic_save(QEMUFile *f, void *opaque)
{
GICState *s = (GICState *)opaque;
+ ARMGICCommonClass *c = ARM_GIC_COMMON_GET_CLASS(s);
int i;
int j;
+ if (c->pre_save) {
+ c->pre_save(s);
+ }
+
qemu_put_be32(f, s->enabled);
for (i = 0; i < s->num_cpu; i++) {
qemu_put_be32(f, s->cpu_enabled[i]);
@@ -57,6 +62,7 @@ static void gic_save(QEMUFile *f, void *opaque)
static int gic_load(QEMUFile *f, void *opaque, int version_id)
{
GICState *s = (GICState *)opaque;
+ ARMGICCommonClass *c = ARM_GIC_COMMON_GET_CLASS(s);
int i;
int j;
@@ -91,6 +97,10 @@ static int gic_load(QEMUFile *f, void *opaque, int version_id)
s->irq_state[i].trigger = qemu_get_byte(f);
}
+ if (c->post_load) {
+ c->post_load(s);
+ }
+
return 0;
}
diff --git a/hw/arm_gic_internal.h b/hw/arm_gic_internal.h
index 699352c..3640be0 100644
--- a/hw/arm_gic_internal.h
+++ b/hw/arm_gic_internal.h
@@ -118,6 +118,8 @@ void gic_init_irqs_and_distributor(GICState *s, int num_irq);
typedef struct ARMGICCommonClass {
SysBusDeviceClass parent_class;
+ void (*pre_save)(GICState *s);
+ void (*post_load)(GICState *s);
} ARMGICCommonClass;
#define TYPE_ARM_GIC "arm_gic"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [RFC v3 5/8] linux-headers: update with VGIC related headers (not for upstream)
2012-10-23 10:50 [Qemu-devel] [RFC v3 0/8] QEMU: Support KVM on ARM Peter Maydell
` (3 preceding siblings ...)
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 4/8] hw/arm_gic: Add presave/postload hooks Peter Maydell
@ 2012-10-23 10:50 ` Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 6/8] target-arm: Use MemoryListener to identify GIC base address for KVM Peter Maydell
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2012-10-23 10:50 UTC (permalink / raw)
To: qemu-devel
Cc: kvm, patches, Marcelo Tosatti, kvmarm, Blue Swirl, Avi Kivity,
Andreas Färber
This updates the headers to match Christoffer's
kvm-arm-v13-vgic-timers branch (commit e1414f8),
which adds the VGIC related ioctls/definitions.
---
| 13 +++++++++++++
| 8 ++++++++
2 files changed, 21 insertions(+)
--git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h
index fb41608..a7ae073 100644
--- a/linux-headers/asm-arm/kvm.h
+++ b/linux-headers/asm-arm/kvm.h
@@ -42,6 +42,19 @@ struct kvm_regs {
#define KVM_ARM_TARGET_CORTEX_A15 0
#define KVM_ARM_NUM_TARGETS 1
+/* KVM_SET_DEVICE_ADDRESS ioctl id encoding */
+#define KVM_DEVICE_TYPE_SHIFT 0
+#define KVM_DEVICE_TYPE_MASK (0xffff << KVM_DEVICE_TYPE_SHIFT)
+#define KVM_DEVICE_ID_SHIFT 16
+#define KVM_DEVICE_ID_MASK (0xffff << KVM_DEVICE_ID_SHIFT)
+
+/* Supported device IDs */
+#define KVM_ARM_DEVICE_VGIC_V2 0
+
+/* Supported VGIC address types */
+#define KVM_VGIC_V2_ADDR_TYPE_DIST 0
+#define KVM_VGIC_V2_ADDR_TYPE_CPU 1
+
struct kvm_vcpu_init {
__u32 target;
__u32 features[7];
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index 4f309db..60ee3a0 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -631,6 +631,7 @@ struct kvm_ppc_smmu_info {
#endif
#define KVM_CAP_IRQFD_RESAMPLE 82
#define KVM_CAP_PPC_BOOKE_WATCHDOG 83
+#define KVM_CAP_SET_DEVICE_ADDR 84
#ifdef KVM_CAP_IRQ_ROUTING
@@ -778,6 +779,11 @@ struct kvm_msi {
__u8 pad[16];
};
+struct kvm_device_address {
+ __u32 id;
+ __u64 addr;
+};
+
/*
* ioctls for VM fds
*/
@@ -861,6 +867,8 @@ struct kvm_s390_ucas_mapping {
#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce)
/* Available with KVM_CAP_RMA */
#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma)
+/* Available with KVM_CAP_SET_DEVICE_ADDR */
+#define KVM_SET_DEVICE_ADDRESS _IOW(KVMIO, 0xaa, struct kvm_device_address)
/*
* ioctls for vcpu fds
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [RFC v3 6/8] target-arm: Use MemoryListener to identify GIC base address for KVM
2012-10-23 10:50 [Qemu-devel] [RFC v3 0/8] QEMU: Support KVM on ARM Peter Maydell
` (4 preceding siblings ...)
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 5/8] linux-headers: update with VGIC related headers (not for upstream) Peter Maydell
@ 2012-10-23 10:50 ` Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 7/8] hw/kvm/arm_gic: Implement support for KVM in-kernel ARM GIC Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 8/8] configure: Enable KVM on ARM Peter Maydell
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2012-10-23 10:50 UTC (permalink / raw)
To: qemu-devel
Cc: kvm, patches, Marcelo Tosatti, kvmarm, Blue Swirl, Avi Kivity,
Andreas Färber
When using an in-kernel GIC with KVM, we need to tell the kernel where
the GIC's memory mapped registers live. Do this by registering a
MemoryListener which tracks where the board model maps the A15's
private peripherals, so we can finish the GIC initialisation
when the GIC is actually mapped.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/kvm.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++
target-arm/kvm_arm.h | 32 +++++++++++++++++++
2 files changed, 115 insertions(+)
create mode 100644 target-arm/kvm_arm.h
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
index f7d2235..955983d 100644
--- a/target-arm/kvm.c
+++ b/target-arm/kvm.c
@@ -19,6 +19,7 @@
#include "qemu-timer.h"
#include "sysemu.h"
#include "kvm.h"
+#include "kvm_arm.h"
#include "cpu.h"
#include "hw/arm-misc.h"
@@ -62,6 +63,88 @@ int kvm_arch_init_vcpu(CPUARMState *env)
return ret;
}
+/* We track all the KVM devices which need their memory addresses
+ * passing to the kernel in a list of these structures.
+ * When board init is complete we run through the list and
+ * tell the kernel the base addresses of the memory regions.
+ * We use a MemoryListener to track mapping and unmapping of
+ * the regions during board creation, so the board models don't
+ * need to do anything special for the KVM case.
+ */
+typedef struct KVMDevice {
+ struct kvm_device_address kda;
+ MemoryRegion *mr;
+ QSLIST_ENTRY(KVMDevice) entries;
+} KVMDevice;
+
+static QSLIST_HEAD(kvm_devices_head, KVMDevice) kvm_devices_head;
+
+static void kvm_arm_devlistener_add(MemoryListener *listener,
+ MemoryRegionSection *section)
+{
+ KVMDevice *kd;
+ QSLIST_FOREACH(kd, &kvm_devices_head, entries) {
+ if (section->mr == kd->mr) {
+ kd->kda.addr = section->offset_within_address_space;
+ }
+ }
+}
+
+static void kvm_arm_devlistener_del(MemoryListener *listener,
+ MemoryRegionSection *section)
+{
+ KVMDevice *kd;
+ QSLIST_FOREACH(kd, &kvm_devices_head, entries) {
+ if (section->mr == kd->mr) {
+ kd->kda.addr = -1;
+ }
+ }
+}
+
+static MemoryListener devlistener = {
+ .region_add = kvm_arm_devlistener_add,
+ .region_del = kvm_arm_devlistener_del,
+};
+
+static void kvm_arm_machine_init_done(Notifier *notifier, void *data)
+{
+ KVMDevice *kd, *tkd;
+ memory_listener_unregister(&devlistener);
+ QSLIST_FOREACH_SAFE(kd, &kvm_devices_head, entries, tkd) {
+ if (kd->kda.addr != -1) {
+ if (kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ADDRESS, &kd->kda) < 0) {
+ fprintf(stderr, "KVM_SET_DEVICE_ADDRESS failed: %s\n",
+ strerror(errno));
+ abort();
+ }
+ }
+ g_free(kd);
+ }
+}
+
+static Notifier notify = {
+ .notify = kvm_arm_machine_init_done,
+};
+
+void kvm_arm_register_device(MemoryRegion *mr, uint32_t devid)
+{
+ KVMDevice *kd;
+
+ if (!kvm_irqchip_in_kernel()) {
+ return;
+ }
+
+ if (QSLIST_EMPTY(&kvm_devices_head)) {
+ memory_listener_register(&devlistener, NULL);
+ qemu_add_machine_init_done_notifier(¬ify);
+ }
+ kd = g_new0(KVMDevice, 1);
+ kd->mr = mr;
+ kd->kda.id = devid;
+ kd->kda.addr = -1;
+ QSLIST_INSERT_HEAD(&kvm_devices_head, kd, entries);
+}
+
typedef struct Reg {
uint64_t id;
int offset;
diff --git a/target-arm/kvm_arm.h b/target-arm/kvm_arm.h
new file mode 100644
index 0000000..93babb2
--- /dev/null
+++ b/target-arm/kvm_arm.h
@@ -0,0 +1,32 @@
+/*
+ * QEMU KVM support -- ARM specific functions.
+ *
+ * Copyright (c) 2012 Linaro Limited
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef QEMU_KVM_ARM_H
+#define QEMU_KVM_ARM_H
+
+#include "kvm.h"
+#include "memory.h"
+
+/**
+ * kvm_arm_register_device:
+ * @mr: memory region for this device
+ * @devid: the KVM device ID
+ *
+ * Remember the memory region @mr, and when it is mapped by the
+ * machine model, tell the kernel that base address using the
+ * KVM_SET_DEVICE_ADDRESS ioctl. @devid should be the ID of
+ * the device as defined by KVM_SET_DEVICE_ADDRESS.
+ * The machine model may map and unmap the device multiple times;
+ * the kernel will only be told the final address at the point
+ * where machine init is complete.
+ */
+void kvm_arm_register_device(MemoryRegion *mr, uint32_t devid);
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [RFC v3 7/8] hw/kvm/arm_gic: Implement support for KVM in-kernel ARM GIC
2012-10-23 10:50 [Qemu-devel] [RFC v3 0/8] QEMU: Support KVM on ARM Peter Maydell
` (5 preceding siblings ...)
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 6/8] target-arm: Use MemoryListener to identify GIC base address for KVM Peter Maydell
@ 2012-10-23 10:50 ` Peter Maydell
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 8/8] configure: Enable KVM on ARM Peter Maydell
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2012-10-23 10:50 UTC (permalink / raw)
To: qemu-devel
Cc: kvm, patches, Marcelo Tosatti, kvmarm, Blue Swirl, Avi Kivity,
Andreas Färber
Implement support for using the KVM in-kernel GIC for ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/a15mpcore.c | 8 ++-
hw/arm/Makefile.objs | 1 +
hw/kvm/arm_gic.c | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 177 insertions(+), 1 deletion(-)
create mode 100644 hw/kvm/arm_gic.c
diff --git a/hw/a15mpcore.c b/hw/a15mpcore.c
index fc0a02a..31158f9 100644
--- a/hw/a15mpcore.c
+++ b/hw/a15mpcore.c
@@ -19,6 +19,7 @@
*/
#include "sysbus.h"
+#include "kvm.h"
/* A15MP private memory region. */
@@ -40,8 +41,13 @@ static int a15mp_priv_init(SysBusDevice *dev)
{
A15MPPrivState *s = FROM_SYSBUS(A15MPPrivState, dev);
SysBusDevice *busdev;
+ const char *gictype = "arm-gic";
- s->gic = qdev_create(NULL, "arm_gic");
+ if (kvm_irqchip_in_kernel()) {
+ gictype = "kvm-arm-gic";
+ }
+
+ s->gic = qdev_create(NULL, gictype);
qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);
qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);
qdev_prop_set_uint32(s->gic, "revision", 2);
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 6d049e7..38b10a8 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -31,5 +31,6 @@ obj-y += collie.o
obj-y += imx_serial.o imx_ccm.o imx_timer.o imx_avic.o
obj-y += kzm.o
obj-$(CONFIG_FDT) += ../device_tree.o
+obj-$(CONFIG_KVM) += kvm/arm_gic.o
obj-y := $(addprefix ../,$(obj-y))
diff --git a/hw/kvm/arm_gic.c b/hw/kvm/arm_gic.c
new file mode 100644
index 0000000..0ad1b8b
--- /dev/null
+++ b/hw/kvm/arm_gic.c
@@ -0,0 +1,169 @@
+/*
+ * ARM Generic Interrupt Controller using KVM in-kernel support
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Written by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/sysbus.h"
+#include "kvm.h"
+#include "kvm_arm.h"
+#include "hw/arm_gic_internal.h"
+
+#define TYPE_KVM_ARM_GIC "kvm-arm-gic"
+#define KVM_ARM_GIC(obj) \
+ OBJECT_CHECK(GICState, (obj), TYPE_KVM_ARM_GIC)
+#define KVM_ARM_GIC_CLASS(klass) \
+ OBJECT_CLASS_CHECK(KVMARMGICClass, (klass), TYPE_KVM_ARM_GIC)
+#define KVM_ARM_GIC_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(KVMARMGICClass, (obj), TYPE_KVM_ARM_GIC)
+
+typedef struct KVMARMGICClass {
+ ARMGICCommonClass parent_class;
+ int (*parent_init)(SysBusDevice *dev);
+ void (*parent_reset)(DeviceState *dev);
+} KVMARMGICClass;
+
+static void kvm_arm_gic_set_irq(void *opaque, int irq, int level)
+{
+ /* Meaning of the 'irq' parameter:
+ * [0..N-1] : external interrupts
+ * [N..N+31] : PPI (internal) interrupts for CPU 0
+ * [N+32..N+63] : PPI (internal interrupts for CPU 1
+ * ...
+ * Convert this to the kernel's desired encoding, which
+ * has separate fields in the irq number for type,
+ * CPU number and interrupt number.
+ */
+ GICState *s = (GICState *)opaque;
+ int kvm_irq, irqtype, cpu;
+
+ if (irq < (s->num_irq - GIC_INTERNAL)) {
+ /* External interrupt. The kernel numbers these like the GIC
+ * hardware, with external interrupt IDs starting after the
+ * internal ones.
+ */
+ irqtype = KVM_ARM_IRQ_TYPE_SPI;
+ cpu = 0;
+ irq += GIC_INTERNAL;
+ } else {
+ /* Internal interrupt: decode into (cpu, interrupt id) */
+ irqtype = KVM_ARM_IRQ_TYPE_PPI;
+ irq -= (s->num_irq - GIC_INTERNAL);
+ cpu = irq / GIC_INTERNAL;
+ irq %= GIC_INTERNAL;
+ }
+ kvm_irq = (irqtype << KVM_ARM_IRQ_TYPE_SHIFT)
+ | (cpu << KVM_ARM_IRQ_VCPU_SHIFT) | irq;
+
+ kvm_set_irq(kvm_state, kvm_irq, !!level);
+}
+
+static void kvm_arm_gic_put(GICState *s)
+{
+ /* TODO: there isn't currently a kernel interface to set the GIC state */
+}
+
+static void kvm_arm_gic_get(GICState *s)
+{
+ /* TODO: there isn't currently a kernel interface to get the GIC state */
+}
+
+static void kvm_arm_gic_reset(DeviceState *dev)
+{
+ GICState *s = ARM_GIC_COMMON(dev);
+ KVMARMGICClass *kgc = KVM_ARM_GIC_GET_CLASS(s);
+ kgc->parent_reset(dev);
+ kvm_arm_gic_put(s);
+}
+
+static int kvm_arm_gic_init(SysBusDevice *dev)
+{
+ /* Device instance init function for the GIC sysbus device */
+ int i;
+ GICState *s = FROM_SYSBUS(GICState, dev);
+ KVMARMGICClass *kgc = KVM_ARM_GIC_GET_CLASS(s);
+
+ kgc->parent_init(dev);
+
+ i = s->num_irq - GIC_INTERNAL;
+ /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
+ * GPIO array layout is thus:
+ * [0..N-1] SPIs
+ * [N..N+31] PPIs for CPU 0
+ * [N+32..N+63] PPIs for CPU 1
+ * ...
+ */
+ i += (GIC_INTERNAL * s->num_cpu);
+ qdev_init_gpio_in(&s->busdev.qdev, kvm_arm_gic_set_irq, i);
+ /* We never use our outbound IRQ lines but provide them so that
+ * we maintain the same interface as the non-KVM GIC.
+ */
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
+ }
+ /* Distributor */
+ memory_region_init_reservation(&s->iomem, "kvm-gic_dist", 0x1000);
+ sysbus_init_mmio(dev, &s->iomem);
+ kvm_arm_register_device(&s->iomem,
+ (KVM_ARM_DEVICE_VGIC_V2 << KVM_DEVICE_ID_SHIFT) |
+ KVM_VGIC_V2_ADDR_TYPE_DIST);
+ /* CPU interface for current core. Unlike arm_gic, we don't
+ * provide the "interface for core #N" memory regions, because
+ * cores with a VGIC don't have those.
+ */
+ memory_region_init_reservation(&s->cpuiomem[0], "kvm-gic_cpu", 0x1000);
+ sysbus_init_mmio(dev, &s->cpuiomem[0]);
+ kvm_arm_register_device(&s->cpuiomem[0],
+ (KVM_ARM_DEVICE_VGIC_V2 << KVM_DEVICE_ID_SHIFT) |
+ KVM_VGIC_V2_ADDR_TYPE_CPU);
+ /* TODO: we should tell the kernel at some point the address
+ * of the private peripheral base. However we don't currently have
+ * any convenient infrastructure to do that, and in any case the
+ * kernel doesn't yet implement an ioctl to let us tell it.
+ */
+ return 0;
+}
+
+static void kvm_arm_gic_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass);
+ ARMGICCommonClass *agcc = ARM_GIC_COMMON_CLASS(klass);
+ KVMARMGICClass *kgc = KVM_ARM_GIC_CLASS(klass);
+ agcc->pre_save = kvm_arm_gic_get;
+ agcc->post_load = kvm_arm_gic_put;
+ kgc->parent_init = sbc->init;
+ kgc->parent_reset = dc->reset;
+ sbc->init = kvm_arm_gic_init;
+ dc->reset = kvm_arm_gic_reset;
+ dc->no_user = 1;
+}
+
+static const TypeInfo kvm_arm_gic_info = {
+ .name = TYPE_KVM_ARM_GIC,
+ .parent = TYPE_ARM_GIC_COMMON,
+ .instance_size = sizeof(GICState),
+ .class_init = kvm_arm_gic_class_init,
+ .class_size = sizeof(KVMARMGICClass),
+};
+
+static void kvm_arm_gic_register_types(void)
+{
+ type_register_static(&kvm_arm_gic_info);
+}
+
+type_init(kvm_arm_gic_register_types)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [RFC v3 8/8] configure: Enable KVM on ARM
2012-10-23 10:50 [Qemu-devel] [RFC v3 0/8] QEMU: Support KVM on ARM Peter Maydell
` (6 preceding siblings ...)
2012-10-23 10:50 ` [Qemu-devel] [RFC v3 7/8] hw/kvm/arm_gic: Implement support for KVM in-kernel ARM GIC Peter Maydell
@ 2012-10-23 10:50 ` Peter Maydell
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2012-10-23 10:50 UTC (permalink / raw)
To: qemu-devel
Cc: kvm, patches, Marcelo Tosatti, kvmarm, Blue Swirl, Avi Kivity,
Andreas Färber
Enable KVM on ARM hosts, now that all the necessary components
for it exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
configure | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configure b/configure
index fa5657f..8173367 100755
--- a/configure
+++ b/configure
@@ -3850,7 +3850,7 @@ case "$target_arch2" in
echo "CONFIG_NO_XEN=y" >> $config_target_mak
esac
case "$target_arch2" in
- i386|x86_64|ppcemb|ppc|ppc64|s390x)
+ arm|i386|x86_64|ppcemb|ppc|ppc64|s390x)
# Make sure the target and host cpus are compatible
if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
\( "$target_arch2" = "$cpu" -o \
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread