From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Hans de Goede <hdegoede@redhat.com>, Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 26/36] uhci: Verify queue has not been changed by guest
Date: Thu, 25 Oct 2012 14:51:59 +0200 [thread overview]
Message-ID: <1351169529-10799-27-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1351169529-10799-1-git-send-email-kraxel@redhat.com>
From: Hans de Goede <hdegoede@redhat.com>
According to the spec a guest can unlink a qh, and then as soon as frindex
has changed by 1 since the unlink, assume it is idle and re-use it. However
for various reasons, we cannot simply consider a qh as unlinked if we've not
seen it for 1 frame. This means that it is possible for a guest to re-use /
restart the queue while we still see its old state. This patch adds a safety
check for this, and "early" retires queues when they were changed by the guest.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/usb/hcd-uhci.c | 62 ++++++++++++++++++++++++++++++++++++++--------------
trace-events | 2 +-
2 files changed, 46 insertions(+), 18 deletions(-)
diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index a8b74bd..0984bee 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -105,6 +105,7 @@ struct UHCIAsync {
};
struct UHCIQueue {
+ uint32_t qh_addr;
uint32_t token;
UHCIState *uhci;
USBEndpoint *ep;
@@ -170,20 +171,15 @@ static inline int32_t uhci_queue_token(UHCI_TD *td)
return td->token & 0x7ffff;
}
-static UHCIQueue *uhci_queue_get(UHCIState *s, UHCI_TD *td, USBEndpoint *ep)
+static UHCIQueue *uhci_queue_new(UHCIState *s, uint32_t qh_addr, UHCI_TD *td,
+ USBEndpoint *ep)
{
- uint32_t token = uhci_queue_token(td);
UHCIQueue *queue;
- QTAILQ_FOREACH(queue, &s->queues, next) {
- if (queue->token == token) {
- return queue;
- }
- }
-
queue = g_new0(UHCIQueue, 1);
queue->uhci = s;
- queue->token = token;
+ queue->qh_addr = qh_addr;
+ queue->token = uhci_queue_token(td);
queue->ep = ep;
QTAILQ_INIT(&queue->asyncs);
QTAILQ_INSERT_HEAD(&s->queues, queue, next);
@@ -191,7 +187,7 @@ static UHCIQueue *uhci_queue_get(UHCIState *s, UHCI_TD *td, USBEndpoint *ep)
return queue;
}
-static void uhci_queue_free(UHCIQueue *queue)
+static void uhci_queue_free(UHCIQueue *queue, const char *reason)
{
UHCIState *s = queue->uhci;
UHCIAsync *async;
@@ -201,11 +197,35 @@ static void uhci_queue_free(UHCIQueue *queue)
uhci_async_cancel(async);
}
- trace_usb_uhci_queue_del(queue->token);
+ trace_usb_uhci_queue_del(queue->token, reason);
QTAILQ_REMOVE(&s->queues, queue, next);
g_free(queue);
}
+static UHCIQueue *uhci_queue_find(UHCIState *s, UHCI_TD *td)
+{
+ uint32_t token = uhci_queue_token(td);
+ UHCIQueue *queue;
+
+ QTAILQ_FOREACH(queue, &s->queues, next) {
+ if (queue->token == token) {
+ return queue;
+ }
+ }
+ return NULL;
+}
+
+static bool uhci_queue_verify(UHCIQueue *queue, uint32_t qh_addr, UHCI_TD *td,
+ uint32_t td_addr, bool queuing)
+{
+ UHCIAsync *first = QTAILQ_FIRST(&queue->asyncs);
+
+ return queue->qh_addr == qh_addr &&
+ queue->token == uhci_queue_token(td) &&
+ (queuing || !(td->ctrl & TD_CTRL_ACTIVE) || first == NULL ||
+ first->td_addr == td_addr);
+}
+
static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t td_addr)
{
UHCIAsync *async = g_new0(UHCIAsync, 1);
@@ -274,7 +294,7 @@ static void uhci_async_validate_end(UHCIState *s)
QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) {
if (!queue->valid) {
- uhci_queue_free(queue);
+ uhci_queue_free(queue, "validate-end");
}
}
}
@@ -295,7 +315,7 @@ static void uhci_async_cancel_all(UHCIState *s)
UHCIQueue *queue, *nq;
QTAILQ_FOREACH_SAFE(queue, &s->queues, next, nq) {
- uhci_queue_free(queue);
+ uhci_queue_free(queue, "cancel-all");
}
}
@@ -782,7 +802,7 @@ out:
return err;
}
-static int uhci_handle_td(UHCIState *s, UHCIQueue *q,
+static int uhci_handle_td(UHCIState *s, UHCIQueue *q, uint32_t qh_addr,
UHCI_TD *td, uint32_t td_addr, uint32_t *int_mask)
{
UHCIAsync *async;
@@ -791,6 +811,14 @@ static int uhci_handle_td(UHCIState *s, UHCIQueue *q,
bool queuing = (q != NULL);
uint8_t pid = td->token & 0xff;
+ if (q == NULL) {
+ q = uhci_queue_find(s, td);
+ if (q && !uhci_queue_verify(q, qh_addr, td, td_addr, queuing)) {
+ uhci_queue_free(q, "guest re-used qh");
+ q = NULL;
+ }
+ }
+
/* Is active ? */
if (!(td->ctrl & TD_CTRL_ACTIVE)) {
/*
@@ -825,7 +853,7 @@ static int uhci_handle_td(UHCIState *s, UHCIQueue *q,
if (q == NULL) {
USBDevice *dev = uhci_find_device(s, (td->token >> 8) & 0x7f);
USBEndpoint *ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf);
- q = uhci_queue_get(s, td, ep);
+ q = uhci_queue_new(s, qh_addr, td, ep);
}
async = uhci_async_alloc(q, td_addr);
@@ -954,7 +982,7 @@ static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td)
break;
}
trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token);
- ret = uhci_handle_td(q->uhci, q, &ptd, plink, &int_mask);
+ ret = uhci_handle_td(q->uhci, q, q->qh_addr, &ptd, plink, &int_mask);
if (ret == TD_RESULT_ASYNC_CONT) {
break;
}
@@ -1035,7 +1063,7 @@ static void uhci_process_frame(UHCIState *s)
trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token);
old_td_ctrl = td.ctrl;
- ret = uhci_handle_td(s, NULL, &td, link, &int_mask);
+ ret = uhci_handle_td(s, NULL, curr_qh, &td, link, &int_mask);
if (old_td_ctrl != td.ctrl) {
/* update the status bits of the TD */
val = cpu_to_le32(td.ctrl);
diff --git a/trace-events b/trace-events
index e2d4580..ed136a5 100644
--- a/trace-events
+++ b/trace-events
@@ -287,7 +287,7 @@ usb_uhci_mmio_writew(uint32_t addr, uint32_t val) "addr 0x%04x, val 0x%04x"
usb_uhci_mmio_readl(uint32_t addr, uint32_t val) "addr 0x%04x, ret 0x%08x"
usb_uhci_mmio_writel(uint32_t addr, uint32_t val) "addr 0x%04x, val 0x%08x"
usb_uhci_queue_add(uint32_t token) "token 0x%x"
-usb_uhci_queue_del(uint32_t token) "token 0x%x"
+usb_uhci_queue_del(uint32_t token, const char *reason) "token 0x%x: %s"
usb_uhci_packet_add(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
usb_uhci_packet_link_async(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
usb_uhci_packet_unlink_async(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
--
1.7.1
next prev parent reply other threads:[~2012-10-25 12:52 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-25 12:51 [Qemu-devel] [PULL 00/36] usb patch queue Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 01/36] uhci: Properly unmap packets on cancel / invalid pid Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 02/36] uhci: Move checks to continue queuing to uhci_fill_queue() Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 03/36] ehci: Get rid of packet tbytes field Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 04/36] ehci: Set int flag on a short input packet Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 05/36] ehci: Improve latency of interrupt delivery and async schedule scanning Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 06/36] ehci: Speed up the timer of raising int from the async schedule Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 07/36] ehci: Detect going in circles when filling the queue Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 08/36] ehci: Retry to fill the queue while waiting for td completion Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 09/36] xhci: Add a xhci_ep_nuke_one_xfer helper function Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 10/36] usb: Rename __usb_packet_complete to usb_packet_complete_one Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 11/36] usb: Add USB_RET_ADD_TO_QUEUE packet result code Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 12/36] usb: Move clearing of queue on halt to the core Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 13/36] usb: Move short-not-ok handling " Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 14/36] usb: Add an int_req flag to USBPacket Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 15/36] usb: Enforce iso endpoints never returing USB_RET_ASYNC Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 16/36] uhci: No need to handle async completion of isoc packets Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 17/36] uhci: cleanup: Add an unlink call to uhci_async_cancel() Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 18/36] uhci: Don't retry on error Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 19/36] uhci: Drop unnecessary forward declaration of some static functions Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 20/36] uhci: Move emptying of the queue's asyncs' queue to uhci_queue_free Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 21/36] uhci: Rename UHCIAsync->td to UHCIAsync->td_addr Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 22/36] uhci: Add uhci_read_td() helper function Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 23/36] uhci: Make uhci_fill_queue() actually operate on an UHCIQueue Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 24/36] uhci: Store ep in UHCIQueue Gerd Hoffmann
2012-10-25 12:51 ` [Qemu-devel] [PATCH 25/36] uhci: Immediately free queues on device disconnect Gerd Hoffmann
2012-10-25 12:51 ` Gerd Hoffmann [this message]
2012-10-25 12:52 ` [Qemu-devel] [PATCH 27/36] uhci: Detect guest td re-use Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 28/36] uhci: When the guest marks a pending td non-active, cancel the queue Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 29/36] uhci: Always mark a queue valid when we encounter it Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 30/36] uhci: Retry to fill the queue while waiting for td completion Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 31/36] uhci: Use only one queue for ctrl endpoints Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 32/36] xhci: fix function name in error message Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 33/36] xhci: flush endpoint context unconditinally Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 34/36] xhci: allow disabling interrupters Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 35/36] xhci: make number of interrupters and slots configurable Gerd Hoffmann
2012-10-25 12:52 ` [Qemu-devel] [PATCH 36/36] xhci: fix usb name in caps Gerd Hoffmann
2012-10-29 19:25 ` [Qemu-devel] [PULL 00/36] usb patch queue Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351169529-10799-27-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=hdegoede@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).