From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: peter.crosthwaite@xilinx.com, Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [RfC PATCH 2/5] usb/ehci: Abstract away PCI DMA API
Date: Tue, 30 Oct 2012 12:28:39 +0100 [thread overview]
Message-ID: <1351596522-8142-3-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1351596522-8142-1-git-send-email-kraxel@redhat.com>
From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Pull the DMAContext for the PCI DMA out at device init time and put it into
the device state. Use dma_memory_read/write() instead of pci specific versions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/usb/hcd-ehci.c | 13 ++++++++-----
1 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 7f04322..28890b5 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -389,6 +389,7 @@ struct EHCIState {
USBBus bus;
qemu_irq irq;
MemoryRegion mem;
+ DMAContext *dma;
MemoryRegion mem_caps;
MemoryRegion mem_opreg;
MemoryRegion mem_ports;
@@ -1304,7 +1305,7 @@ static inline int get_dwords(EHCIState *ehci, uint32_t addr,
int i;
for(i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
- pci_dma_read(&ehci->dev, addr, buf, sizeof(*buf));
+ dma_memory_read(ehci->dma, addr, buf, sizeof(*buf));
*buf = le32_to_cpu(*buf);
}
@@ -1319,7 +1320,7 @@ static inline int put_dwords(EHCIState *ehci, uint32_t addr,
for(i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
uint32_t tmp = cpu_to_le32(*buf);
- pci_dma_write(&ehci->dev, addr, &tmp, sizeof(tmp));
+ dma_memory_write(ehci->dma, addr, &tmp, sizeof(tmp));
}
return 1;
@@ -1402,7 +1403,7 @@ static int ehci_init_transfer(EHCIPacket *p)
cpage = get_field(p->qtd.token, QTD_TOKEN_CPAGE);
bytes = get_field(p->qtd.token, QTD_TOKEN_TBYTES);
offset = p->qtd.bufptr[0] & ~QTD_BUFPTR_MASK;
- pci_dma_sglist_init(&p->sgl, &p->queue->ehci->dev, 5);
+ qemu_sglist_init(&p->sgl, 5, p->queue->ehci->dma);
while (bytes > 0) {
if (cpage > 4) {
@@ -1647,7 +1648,7 @@ static int ehci_process_itd(EHCIState *ehci,
return USB_RET_PROCERR;
}
- pci_dma_sglist_init(&ehci->isgl, &ehci->dev, 2);
+ qemu_sglist_init(&ehci->isgl, 2, ehci->dma);
if (off + len > 4096) {
/* transfer crosses page border */
uint32_t len2 = off + len - 4096;
@@ -2402,7 +2403,7 @@ static void ehci_advance_periodic_state(EHCIState *ehci)
}
list |= ((ehci->frindex & 0x1ff8) >> 1);
- pci_dma_read(&ehci->dev, list, &entry, sizeof entry);
+ dma_memory_read(ehci->dma, list, &entry, sizeof entry);
entry = le32_to_cpu(entry);
DPRINTF("PERIODIC state adv fr=%d. [%08X] -> %08X\n",
@@ -2750,6 +2751,8 @@ static int usb_ehci_initfn(PCIDevice *dev)
s->irq = s->dev.irq[3];
+ s->dma = pci_dma_context(dev);
+
usb_bus_new(&s->bus, &ehci_bus_ops, &s->dev.qdev);
for(i = 0; i < NB_PORTS; i++) {
usb_register_port(&s->bus, &s->ports[i], s, i, &ehci_port_ops,
--
1.7.1
next prev parent reply other threads:[~2012-10-30 11:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-30 11:28 [Qemu-devel] [RfC PATCH 0/5] ehci pci splitup Gerd Hoffmann
2012-10-30 11:28 ` [Qemu-devel] [RfC PATCH 1/5] usb/ehci: parameterise the register region offsets Gerd Hoffmann
2012-10-30 12:41 ` Andreas Färber
2012-10-30 11:28 ` Gerd Hoffmann [this message]
2012-10-30 12:42 ` [Qemu-devel] [RfC PATCH 2/5] usb/ehci: Abstract away PCI DMA API Andreas Färber
2012-10-30 11:28 ` [Qemu-devel] [RfC PATCH 3/5] usb/ehci: seperate out PCIisms Gerd Hoffmann
2012-10-31 16:05 ` Andreas Färber
2012-11-01 8:39 ` Gerd Hoffmann
2012-10-30 11:28 ` [Qemu-devel] [RfC PATCH 4/5] usb/ehci: Guard definition of EHCI_DEBUG Gerd Hoffmann
2012-10-30 11:28 ` [Qemu-devel] [RfC PATCH 5/5] usb/ehci: split into multiple source files Gerd Hoffmann
2012-10-30 13:13 ` [Qemu-devel] [RfC PATCH 0/5] ehci pci splitup Peter Crosthwaite
2012-10-30 14:14 ` Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351596522-8142-3-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=peter.crosthwaite@xilinx.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).