From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, aliguori@us.ibm.com,
quintela@redhat.com, blauwirbel@gmail.com, pbonzini@redhat.com
Subject: [Qemu-devel] [PATCH 19/29] shpc: qidl_declare SHPCDevice
Date: Thu, 1 Nov 2012 08:04:21 -0500 [thread overview]
Message-ID: <1351775071-7644-20-git-send-email-mdroth@linux.vnet.ibm.com> (raw)
In-Reply-To: <1351775071-7644-1-git-send-email-mdroth@linux.vnet.ibm.com>
Also add a config_size field which we will use later to track the config
size for serialization and replace unnecessary uses of SHPC_SIZEOF() with
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
---
hw/shpc.c | 42 ++++++++++++++++++++++++++----------------
hw/shpc.h | 17 +++++++++++------
2 files changed, 37 insertions(+), 22 deletions(-)
diff --git a/hw/shpc.c b/hw/shpc.c
index 4597bbd..92af357 100644
--- a/hw/shpc.c
+++ b/hw/shpc.c
@@ -6,6 +6,10 @@
#include "pci.h"
#include "pci_internals.h"
#include "msi.h"
+#include "qidl.h"
+
+QIDL_ENABLE()
+QIDL_IMPLEMENT_PUBLIC(SHPCDevice)
/* TODO: model power only and disabled slot states. */
/* TODO: handle SERR and wakeups */
@@ -193,7 +197,7 @@ void shpc_reset(PCIDevice *d)
SHPCDevice *shpc = d->shpc;
int nslots = shpc->nslots;
int i;
- memset(shpc->config, 0, SHPC_SIZEOF(d));
+ memset(shpc->config, 0, shpc->config_size);
pci_set_byte(shpc->config + SHPC_NSLOTS, nslots);
pci_set_long(shpc->config + SHPC_SLOTS_33, nslots);
pci_set_long(shpc->config + SHPC_SLOTS_66, 0);
@@ -392,10 +396,10 @@ static void shpc_write(PCIDevice *d, unsigned addr, uint64_t val, int l)
{
SHPCDevice *shpc = d->shpc;
int i;
- if (addr >= SHPC_SIZEOF(d)) {
+ if (addr >= shpc->config_size) {
return;
}
- l = MIN(l, SHPC_SIZEOF(d) - addr);
+ l = MIN(l, shpc->config_size - addr);
/* TODO: code duplicated from pci.c */
for (i = 0; i < l; val >>= 8, ++i) {
@@ -415,10 +419,10 @@ static void shpc_write(PCIDevice *d, unsigned addr, uint64_t val, int l)
static uint64_t shpc_read(PCIDevice *d, unsigned addr, int l)
{
uint64_t val = 0x0;
- if (addr >= SHPC_SIZEOF(d)) {
+ if (addr >= d->shpc->config_size) {
return val;
}
- l = MIN(l, SHPC_SIZEOF(d) - addr);
+ l = MIN(l, d->shpc->config_size - addr);
memcpy(&val, d->shpc->config + addr, l);
return val;
}
@@ -571,10 +575,11 @@ int shpc_init(PCIDevice *d, PCIBus *sec_bus, MemoryRegion *bar, unsigned offset)
return -EINVAL;
}
shpc->nslots = nslots;
- shpc->config = g_malloc0(SHPC_SIZEOF(d));
- shpc->cmask = g_malloc0(SHPC_SIZEOF(d));
- shpc->wmask = g_malloc0(SHPC_SIZEOF(d));
- shpc->w1cmask = g_malloc0(SHPC_SIZEOF(d));
+ shpc->config_size = SHPC_SIZEOF(d);
+ shpc->config = g_malloc0(shpc->config_size);
+ shpc->cmask = g_malloc0(shpc->config_size);
+ shpc->wmask = g_malloc0(shpc->config_size);
+ shpc->w1cmask = g_malloc0(shpc->config_size);
shpc_reset(d);
@@ -612,7 +617,7 @@ int shpc_init(PCIDevice *d, PCIBus *sec_bus, MemoryRegion *bar, unsigned offset)
/* TODO: init cmask */
memory_region_init_io(&shpc->mmio, &shpc_mmio_ops, d, "shpc-mmio",
- SHPC_SIZEOF(d));
+ shpc->config_size);
shpc_cap_update_dword(d);
memory_region_add_subregion(bar, offset, &shpc->mmio);
pci_bus_hotplug(sec_bus, shpc_device_hotplug, &d->qdev);
@@ -658,19 +663,24 @@ void shpc_cap_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
static void shpc_save(QEMUFile *f, void *pv, size_t size)
{
PCIDevice *d = container_of(pv, PCIDevice, shpc);
- qemu_put_buffer(f, d->shpc->config, SHPC_SIZEOF(d));
+ qemu_put_buffer(f, d->shpc->config, d->shpc->config_size);
+}
+
+void shpc_post_load(PCIDevice *d)
+{
+ /* Make sure we don't lose notifications. An extra interrupt is harmless. */
+ d->shpc->msi_requested = 0;
+ shpc_interrupt_update(d);
}
static int shpc_load(QEMUFile *f, void *pv, size_t size)
{
PCIDevice *d = container_of(pv, PCIDevice, shpc);
- int ret = qemu_get_buffer(f, d->shpc->config, SHPC_SIZEOF(d));
- if (ret != SHPC_SIZEOF(d)) {
+ int ret = qemu_get_buffer(f, d->shpc->config, d->shpc->config_size);
+ if (ret != d->shpc->config_size) {
return -EINVAL;
}
- /* Make sure we don't lose notifications. An extra interrupt is harmless. */
- d->shpc->msi_requested = 0;
- shpc_interrupt_update(d);
+ shpc_post_load(d);
return 0;
}
diff --git a/hw/shpc.h b/hw/shpc.h
index 130b71d..327e4b3 100644
--- a/hw/shpc.h
+++ b/hw/shpc.h
@@ -4,32 +4,36 @@
#include "qemu-common.h"
#include "memory.h"
#include "vmstate.h"
+#include "qidl.h"
-struct SHPCDevice {
+QIDL_DECLARE_PUBLIC(SHPCDevice) {
/* Capability offset in device's config space */
int cap;
/* # of hot-pluggable slots */
int nslots;
+ /* size of space for SHPC working register set */
+ size_t config_size;
+
/* SHPC WRS: working register set */
- uint8_t *config;
+ uint8_t *config q_size(config_size);
/* Used to enable checks on load. Note that writable bits are
* never checked even if set in cmask. */
- uint8_t *cmask;
+ uint8_t q_immutable *cmask;
/* Used to implement R/W bytes */
- uint8_t *wmask;
+ uint8_t q_immutable *wmask;
/* Used to implement RW1C(Write 1 to Clear) bytes */
- uint8_t *w1cmask;
+ uint8_t q_immutable *w1cmask;
/* MMIO for the SHPC BAR */
MemoryRegion mmio;
/* Bus controlled by this SHPC */
- PCIBus *sec_bus;
+ PCIBus q_elsewhere *sec_bus;
/* MSI already requested for this event */
int msi_requested;
@@ -40,6 +44,7 @@ int shpc_bar_size(PCIDevice *dev);
int shpc_init(PCIDevice *dev, PCIBus *sec_bus, MemoryRegion *bar, unsigned off);
void shpc_cleanup(PCIDevice *dev, MemoryRegion *bar);
void shpc_cap_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int len);
+void shpc_post_load(PCIDevice *d);
extern VMStateInfo shpc_vmstate_info;
#define SHPC_VMSTATE(_field, _type) \
--
1.7.9.5
next prev parent reply other threads:[~2012-11-01 13:05 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-01 13:04 [Qemu-devel] [PATCH 00/29] QIDL: First Batch of Device Conversions Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 01/29] qemu-timer: add QEMUTimer visitor Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 02/29] qidl: qidl.h, mark common immutable types as q_immutable by default Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 03/29] isa: qidl_declare ISADevice Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 04/29] rtc: qidl_declare RTCState Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 05/29] rtc: use qidl-generated properties Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 06/29] rtc: add qom property for RTCState state Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 07/29] pci: qidl_declare PCIDevice + PCIBus Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 08/29] pci: use qidl_declare'd properties for TYPE_PCI_DEVICE Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 09/29] pci: add qom property for PCIBus instances Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 10/29] vga: qidl_declare VGACommonState Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 11/29] cirrus: qidl_declare PCICirrusVGAState + CirrusVGAState Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 12/29] cirrus: add qom property for cirrus-vga state Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 13/29] cirrus: qidl_declare ISACirrusVGAState Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 14/29] cirrus: add qom property for isa-cirrus-vga Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 15/29] i440fx: qidl_declare PCII440FXState Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 16/29] i440fx: a qom property for i440FX state Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 17/29] piix3: qidl_declare PIIX3State Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 18/29] piix3: add qom property for PIIX3 state Michael Roth
2012-11-01 13:04 ` Michael Roth [this message]
2012-11-01 13:04 ` [Qemu-devel] [PATCH 20/29] pci_bridge: qidl_declare PCIBridge Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 21/29] pci_bridge_dev: qidl_declare PCIBridgeDev Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 22/29] pci_bridge_dev: add qom property for pci-bridge state Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 23/29] ide: qidl_declare IDEBus + IDEState + IDEDevice Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 24/29] ide: qidl_declare ISAIDEState Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 25/29] ide: add qom property for isa-ide state Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 26/29] ide: qidl_declare BMDMAState + PCIIDEState Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 27/29] ide: add qom property for piix3/piix4-ide state Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 28/29] hpet: qidl_declare HPETState + HPETTimer Michael Roth
2012-11-01 13:04 ` [Qemu-devel] [PATCH 29/29] hpet: add qom property for hpet state Michael Roth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351775071-7644-20-git-send-email-mdroth@linux.vnet.ibm.com \
--to=mdroth@linux.vnet.ibm.com \
--cc=aliguori@us.ibm.com \
--cc=blauwirbel@gmail.com \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).