qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>,
	Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 11/31] usb/ehci: seperate out PCIisms
Date: Thu,  1 Nov 2012 16:54:24 +0100	[thread overview]
Message-ID: <1351785284-15384-12-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1351785284-15384-1-git-send-email-kraxel@redhat.com>

From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

Seperate the PCI stuff from the EHCI components. Extracted the PCIDevice
out into a new wrapper struct to make EHCIState non-PCI-specific. Seperated
tho non PCI init component out into a seperate "common" init function.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/usb/hcd-ehci.c |  124 +++++++++++++++++++++++++++++++----------------------
 1 files changed, 72 insertions(+), 52 deletions(-)

diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 28890b5..59580fc 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -385,7 +385,6 @@ struct EHCIQueue {
 typedef QTAILQ_HEAD(EHCIQueueHead, EHCIQueue) EHCIQueueHead;
 
 struct EHCIState {
-    PCIDevice dev;
     USBBus bus;
     qemu_irq irq;
     MemoryRegion mem;
@@ -447,6 +446,11 @@ struct EHCIState {
     bool int_req_by_async;
 };
 
+typedef struct EHCIPCIState {
+    PCIDevice pcidev;
+    EHCIState ehci;
+} EHCIPCIState;
+
 #define SET_LAST_RUN_CLOCK(s) \
     (s)->last_run_ns = qemu_get_clock_ns(vm_clock);
 
@@ -2553,7 +2557,7 @@ static const MemoryRegionOps ehci_mmio_port_ops = {
     .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
-static int usb_ehci_initfn(PCIDevice *dev);
+static int usb_ehci_pci_initfn(PCIDevice *dev);
 
 static USBPortOps ehci_port_ops = {
     .attach = ehci_attach,
@@ -2614,12 +2618,11 @@ static void usb_ehci_vm_state_change(void *opaque, int running, RunState state)
 }
 
 static const VMStateDescription vmstate_ehci = {
-    .name        = "ehci",
+    .name        = "ehci-core",
     .version_id  = 2,
     .minimum_version_id  = 1,
     .post_load   = usb_ehci_post_load,
     .fields      = (VMStateField[]) {
-        VMSTATE_PCI_DEVICE(dev, EHCIState),
         /* mmio registers */
         VMSTATE_UINT32(usbcmd, EHCIState),
         VMSTATE_UINT32(usbsts, EHCIState),
@@ -2650,8 +2653,19 @@ static const VMStateDescription vmstate_ehci = {
     }
 };
 
-static Property ehci_properties[] = {
-    DEFINE_PROP_UINT32("maxframes", EHCIState, maxframes, 128),
+static const VMStateDescription vmstate_ehci_pci = {
+    .name        = "ehci",
+    .version_id  = 2,
+    .minimum_version_id  = 1,
+    .post_load   = usb_ehci_post_load,
+    .fields      = (VMStateField[]) {
+        VMSTATE_PCI_DEVICE(pcidev, EHCIPCIState),
+        VMSTATE_STRUCT(ehci, EHCIPCIState, 2, vmstate_ehci, EHCIState),
+    }
+};
+
+static Property ehci_pci_properties[] = {
+    DEFINE_PROP_UINT32("maxframes", EHCIPCIState, ehci.maxframes, 128),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -2660,13 +2674,13 @@ static void ehci_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->init = usb_ehci_initfn;
+    k->init = usb_ehci_pci_initfn;
     k->vendor_id = PCI_VENDOR_ID_INTEL;
     k->device_id = PCI_DEVICE_ID_INTEL_82801D; /* ich4 */
     k->revision = 0x10;
     k->class_id = PCI_CLASS_SERIAL_USB;
     dc->vmsd = &vmstate_ehci;
-    dc->props = ehci_properties;
+    dc->props = ehci_pci_properties;
 }
 
 static TypeInfo ehci_info = {
@@ -2681,13 +2695,13 @@ static void ich9_ehci_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->init = usb_ehci_initfn;
+    k->init = usb_ehci_pci_initfn;
     k->vendor_id = PCI_VENDOR_ID_INTEL;
     k->device_id = PCI_DEVICE_ID_INTEL_82801I_EHCI1;
     k->revision = 0x03;
     k->class_id = PCI_CLASS_SERIAL_USB;
     dc->vmsd = &vmstate_ehci;
-    dc->props = ehci_properties;
+    dc->props = ehci_pci_properties;
 }
 
 static TypeInfo ich9_ehci_info = {
@@ -2697,44 +2711,10 @@ static TypeInfo ich9_ehci_info = {
     .class_init    = ich9_ehci_class_init,
 };
 
-static int usb_ehci_initfn(PCIDevice *dev)
+static void usb_ehci_initfn(EHCIState *s, DeviceState *dev)
 {
-    EHCIState *s = DO_UPCAST(EHCIState, dev, dev);
-    uint8_t *pci_conf = s->dev.config;
     int i;
 
-    pci_set_byte(&pci_conf[PCI_CLASS_PROG], 0x20);
-
-    /* capabilities pointer */
-    pci_set_byte(&pci_conf[PCI_CAPABILITY_LIST], 0x00);
-    //pci_set_byte(&pci_conf[PCI_CAPABILITY_LIST], 0x50);
-
-    pci_set_byte(&pci_conf[PCI_INTERRUPT_PIN], 4); /* interrupt pin D */
-    pci_set_byte(&pci_conf[PCI_MIN_GNT], 0);
-    pci_set_byte(&pci_conf[PCI_MAX_LAT], 0);
-
-    // pci_conf[0x50] = 0x01; // power management caps
-
-    pci_set_byte(&pci_conf[USB_SBRN], USB_RELEASE_2); // release number (2.1.4)
-    pci_set_byte(&pci_conf[0x61], 0x20);  // frame length adjustment (2.1.5)
-    pci_set_word(&pci_conf[0x62], 0x00);  // port wake up capability (2.1.6)
-
-    pci_conf[0x64] = 0x00;
-    pci_conf[0x65] = 0x00;
-    pci_conf[0x66] = 0x00;
-    pci_conf[0x67] = 0x00;
-    pci_conf[0x68] = 0x01;
-    pci_conf[0x69] = 0x00;
-    pci_conf[0x6a] = 0x00;
-    pci_conf[0x6b] = 0x00;  // USBLEGSUP
-    pci_conf[0x6c] = 0x00;
-    pci_conf[0x6d] = 0x00;
-    pci_conf[0x6e] = 0x00;
-    pci_conf[0x6f] = 0xc0;  // USBLEFCTLSTS
-
-    s->capsbase = 0x00;
-    s->opregbase = 0x20;
-
     /* 2.2 host controller interface version */
     s->caps[0x00] = (uint8_t)(s->opregbase - s->capsbase);
     s->caps[0x01] = 0x00;
@@ -2745,15 +2725,10 @@ static int usb_ehci_initfn(PCIDevice *dev)
     s->caps[0x06] = 0x00;
     s->caps[0x07] = 0x00;
     s->caps[0x08] = 0x80;        /* We can cache whole frame, no 64-bit */
-    s->caps[0x09] = 0x68;        /* EECP */
     s->caps[0x0a] = 0x00;
     s->caps[0x0b] = 0x00;
 
-    s->irq = s->dev.irq[3];
-
-    s->dma = pci_dma_context(dev);
-
-    usb_bus_new(&s->bus, &ehci_bus_ops, &s->dev.qdev);
+    usb_bus_new(&s->bus, &ehci_bus_ops, dev);
     for(i = 0; i < NB_PORTS; i++) {
         usb_register_port(&s->bus, &s->ports[i], s, i, &ehci_port_ops,
                           USB_SPEED_MASK_HIGH);
@@ -2781,8 +2756,53 @@ static int usb_ehci_initfn(PCIDevice *dev)
     memory_region_add_subregion(&s->mem, s->opregbase, &s->mem_opreg);
     memory_region_add_subregion(&s->mem, s->opregbase + PORTSC_BEGIN,
                                 &s->mem_ports);
+}
+
+static int usb_ehci_pci_initfn(PCIDevice *dev)
+{
+    EHCIPCIState *i = DO_UPCAST(EHCIPCIState, pcidev, dev);
+    EHCIState *s = &i->ehci;
+    uint8_t *pci_conf = dev->config;
+
+    pci_set_byte(&pci_conf[PCI_CLASS_PROG], 0x20);
+
+    /* capabilities pointer */
+    pci_set_byte(&pci_conf[PCI_CAPABILITY_LIST], 0x00);
+    /* pci_set_byte(&pci_conf[PCI_CAPABILITY_LIST], 0x50); */
+
+    pci_set_byte(&pci_conf[PCI_INTERRUPT_PIN], 4); /* interrupt pin D */
+    pci_set_byte(&pci_conf[PCI_MIN_GNT], 0);
+    pci_set_byte(&pci_conf[PCI_MAX_LAT], 0);
+
+    /* pci_conf[0x50] = 0x01; *//* power management caps */
+
+    pci_set_byte(&pci_conf[USB_SBRN], USB_RELEASE_2); /* release # (2.1.4) */
+    pci_set_byte(&pci_conf[0x61], 0x20);  /* frame length adjustment (2.1.5) */
+    pci_set_word(&pci_conf[0x62], 0x00);  /* port wake up capability (2.1.6) */
+
+    pci_conf[0x64] = 0x00;
+    pci_conf[0x65] = 0x00;
+    pci_conf[0x66] = 0x00;
+    pci_conf[0x67] = 0x00;
+    pci_conf[0x68] = 0x01;
+    pci_conf[0x69] = 0x00;
+    pci_conf[0x6a] = 0x00;
+    pci_conf[0x6b] = 0x00;  /* USBLEGSUP */
+    pci_conf[0x6c] = 0x00;
+    pci_conf[0x6d] = 0x00;
+    pci_conf[0x6e] = 0x00;
+    pci_conf[0x6f] = 0xc0;  /* USBLEFCTLSTS */
+
+    s->caps[0x09] = 0x68;        /* EECP */
+
+    s->irq = dev->irq[3];
+    s->dma = pci_dma_context(dev);
+
+    s->capsbase = 0x00;
+    s->opregbase = 0x20;
 
-    pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mem);
+    usb_ehci_initfn(s, DEVICE(dev));
+    pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mem);
 
     return 0;
 }
-- 
1.7.1

  parent reply	other threads:[~2012-11-01 15:54 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-01 15:54 [Qemu-devel] [PULL 00/31] usb patch queue Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 01/31] xhci: add {get, set}_field macros & enum for pls Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 02/31] xhci: s/xhci_update_port/xhci_port_update/ Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 03/31] xhci: add xhci_port_have_device Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 04/31] xhci: add xhci_port_notify Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 05/31] xhci: add xhci_port_reset Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 06/31] xhci: set pls in xhci_port_update & xhci_port_reset Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 07/31] xhci: add port trace points Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 08/31] xhci: allow address slot being called multiple times Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 09/31] usb/ehci: parameterise the register region offsets Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 10/31] usb/ehci: Abstract away PCI DMA API Gerd Hoffmann
2012-11-01 15:54 ` Gerd Hoffmann [this message]
2012-11-01 15:54 ` [Qemu-devel] [PATCH 12/31] usb/ehci: Guard definition of EHCI_DEBUG Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 13/31] usb/ehci: split into multiple source files Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 14/31] usb/ehci: add sysbus variant Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 15/31] xilinx_zynq: add USB controllers Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 16/31] uhci: dynamic type generation Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 17/31] uhci: stick irq routing info into UHCIInfo too Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 18/31] uhci: add ich9 00:1a.* variants Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 19/31] usb/ehci-pci: dynamic type generation Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 20/31] usb/ehci-pci: add ich9 00:1a.* variant Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 21/31] usb/ehci-pci: add helper to create ich9 usb controllers Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 22/31] uhci: Add a uhci_handle_td_error() helper function Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 23/31] uhci: Don't crash on device disconnect Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 24/31] usb: Add packet combining functions Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 25/31] combined-packet: Add a workaround for Linux usbfs + live migration Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 26/31] usb-redir: Add support for 32 bits bulk packet length Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 27/31] usb-redir: Add support for input pipelining Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 28/31] usb-redir: Add an usbredir_setup_usb_eps() helper function Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 29/31] usb-redir: Use reject rather the disconnect on bad ep info Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 30/31] usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller Gerd Hoffmann
2012-11-01 15:54 ` [Qemu-devel] [PATCH 31/31] usb-redir: Allow redirecting super speed devices to high speed controllers Gerd Hoffmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351785284-15384-12-git-send-email-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=peter.crosthwaite@xilinx.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).