qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 17/26] fdc: fix false FD_SR0_SEEK
Date: Wed, 14 Nov 2012 19:47:18 +0100	[thread overview]
Message-ID: <1352918847-3696-18-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1352918847-3696-1-git-send-email-kwolf@redhat.com>

From: Hervé Poussineau <hpoussin@reactos.org>

Do not always set FD_SR0_SEEK, as callers already set it if needed.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 hw/fdc.c         |   10 +++++++---
 tests/fdc-test.c |    6 +++---
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/hw/fdc.c b/hw/fdc.c
index a9a2a2a..525ba20 100644
--- a/hw/fdc.c
+++ b/hw/fdc.c
@@ -1149,10 +1149,14 @@ static void fdctrl_stop_transfer(FDCtrl *fdctrl, uint8_t status0,
                                  uint8_t status1, uint8_t status2)
 {
     FDrive *cur_drv;
-
     cur_drv = get_cur_drv(fdctrl);
-    fdctrl->status0 = status0 | FD_SR0_SEEK | (cur_drv->head << 2) |
-                      GET_CUR_DRV(fdctrl);
+
+    fdctrl->status0 &= ~(FD_SR0_DS0 | FD_SR0_DS1 | FD_SR0_HEAD);
+    fdctrl->status0 |= GET_CUR_DRV(fdctrl);
+    if (cur_drv->head) {
+        fdctrl->status0 |= FD_SR0_HEAD;
+    }
+    fdctrl->status0 |= status0;
 
     FLOPPY_DPRINTF("transfer status: %02x %02x %02x (%02x)\n",
                    status0, status1, status2, fdctrl->status0);
diff --git a/tests/fdc-test.c b/tests/fdc-test.c
index 4649e3f..1156112 100644
--- a/tests/fdc-test.c
+++ b/tests/fdc-test.c
@@ -154,7 +154,7 @@ static uint8_t send_read_command(void)
     }
 
     st0 = floppy_recv();
-    if (st0 != 0x60) {
+    if (st0 != 0x40) {
         ret = 1;
     }
 
@@ -398,7 +398,7 @@ static void test_read_no_dma_1(void)
 
     outb(FLOPPY_BASE + reg_dor, inb(FLOPPY_BASE + reg_dor) & ~0x08);
     send_seek(0);
-    ret = send_read_no_dma_command(1, 0x24); /* FIXME: should be 0x04 */
+    ret = send_read_no_dma_command(1, 0x04);
     g_assert(ret == 0);
 }
 
@@ -408,7 +408,7 @@ static void test_read_no_dma_18(void)
 
     outb(FLOPPY_BASE + reg_dor, inb(FLOPPY_BASE + reg_dor) & ~0x08);
     send_seek(0);
-    ret = send_read_no_dma_command(18, 0x24); /* FIXME: should be 0x04 */
+    ret = send_read_no_dma_command(18, 0x04);
     g_assert(ret == 0);
 }
 
-- 
1.7.6.5

  parent reply	other threads:[~2012-11-14 18:48 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-14 18:47 [Qemu-devel] [PULL 00/26] Block patches Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 01/26] qemu: Document GlusterFS block driver usage Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 02/26] qcow2: Fix refcount table size calculation Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 03/26] qemu-iotests: qcow2: Test growing large refcount table Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 04/26] MAINTAINERS: add Stefan Hajnoczi as block and virtio-blk co-maintainer Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 05/26] block: Workaround for older versions of MinGW gcc Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 06/26] tests: allow qemu-iotests to be run against nbd backend Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 07/26] aio: switch aiocb_size type int -> size_t Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 08/26] aio: use g_slice_alloc() for AIOCB pooling Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 09/26] aio: rename AIOPool to AIOCBInfo Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 10/26] fdc: Remove status0 parameter from fdctrl_set_fifo() Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 11/26] fdc-test: split test_media_change() test, so insert part can be reused Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 12/26] fdc-test: insert media before fuzzing registers Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 13/26] fdc-test: add tests for non-DMA READ command Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 14/26] fdc: use status0 field instead of a local variable Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 15/26] fdc: fix FD_SR0_SEEK for non-DMA transfers and multi sectors transfers Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 16/26] fdc: fix FD_SR0_SEEK for initial seek on DMA transfers Kevin Wolf
2012-11-14 18:47 ` Kevin Wolf [this message]
2012-11-14 18:47 ` [Qemu-devel] [PATCH 18/26] fdc-test: Check READ ID Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 19/26] fdc: implement VERIFY command Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 20/26] fdc-tests: add tests for " Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 21/26] fdc: remove double affectation of FD_MSR_CMDBUSY flag Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 22/26] fdc: fix typo in zero constant Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 23/26] fdc: remove last usage of FD_STATE_SEEK Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 24/26] vmdk: Fix data corruption bug in WRITE and READ handling Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 25/26] megasas: Use bdrv_drain_all instead of qemu_aio_flush Kevin Wolf
2012-11-14 18:47 ` [Qemu-devel] [PATCH 26/26] qemu-io: " Kevin Wolf
2012-11-19  9:12 ` [Qemu-devel] [PULL 00/26] Block patches Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1352918847-3696-18-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).