From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Anthony Liguori <aliguori@us.ibm.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
Blue Swirl <blauwirbel@gmail.com>,
khoa@us.ibm.com, Stefan Hajnoczi <stefanha@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>, Asias He <asias@redhat.com>
Subject: [Qemu-devel] [PATCH v4 03/11] dataplane: add host memory mapping code
Date: Thu, 22 Nov 2012 16:16:44 +0100 [thread overview]
Message-ID: <1353597412-12232-4-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1353597412-12232-1-git-send-email-stefanha@redhat.com>
The data plane thread needs to map guest physical addresses to host
pointers. Normally this is done with cpu_physical_memory_map() but the
function assumes the global mutex is held. The data plane thread does
not touch the global mutex and therefore needs a thread-safe memory
mapping mechanism.
Hostmem registers a MemoryListener similar to how vhost collects and
pushes memory region information into the kernel. There is a
fine-grained lock on the regions list which is held during lookup and
when installing a new regions list.
When the physical memory map changes the MemoryListener callbacks are
invoked. They build up a new list of memory regions which is finally
installed when the list has been completed.
Note that this approach is not safe across memory hotplug because mapped
pointers may still be in used across memory unplug. However, this is
currently a problem for QEMU in general and needs to be addressed in the
future.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
hw/dataplane/Makefile.objs | 3 +
hw/dataplane/hostmem.c | 165 +++++++++++++++++++++++++++++++++++++++++++++
hw/dataplane/hostmem.h | 52 ++++++++++++++
3 files changed, 220 insertions(+)
create mode 100644 hw/dataplane/Makefile.objs
create mode 100644 hw/dataplane/hostmem.c
create mode 100644 hw/dataplane/hostmem.h
diff --git a/hw/dataplane/Makefile.objs b/hw/dataplane/Makefile.objs
new file mode 100644
index 0000000..8c8dea1
--- /dev/null
+++ b/hw/dataplane/Makefile.objs
@@ -0,0 +1,3 @@
+ifeq ($(CONFIG_VIRTIO), y)
+common-obj-$(CONFIG_VIRTIO_BLK_DATA_PLANE) += hostmem.o
+endif
diff --git a/hw/dataplane/hostmem.c b/hw/dataplane/hostmem.c
new file mode 100644
index 0000000..48aabf0
--- /dev/null
+++ b/hw/dataplane/hostmem.c
@@ -0,0 +1,165 @@
+/*
+ * Thread-safe guest to host memory mapping
+ *
+ * Copyright 2012 Red Hat, Inc. and/or its affiliates
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "exec-memory.h"
+#include "hostmem.h"
+
+static int hostmem_lookup_cmp(const void *phys_, const void *region_)
+{
+ hwaddr phys = *(const hwaddr *)phys_;
+ const HostmemRegion *region = region_;
+
+ if (phys < region->guest_addr) {
+ return -1;
+ } else if (phys >= region->guest_addr + region->size) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/**
+ * Map guest physical address to host pointer
+ */
+void *hostmem_lookup(Hostmem *hostmem, hwaddr phys, hwaddr len, bool is_write)
+{
+ HostmemRegion *region;
+ void *host_addr = NULL;
+ hwaddr offset_within_region;
+
+ qemu_mutex_lock(&hostmem->current_regions_lock);
+ region = bsearch(&phys, hostmem->current_regions,
+ hostmem->num_current_regions,
+ sizeof(hostmem->current_regions[0]),
+ hostmem_lookup_cmp);
+ if (!region) {
+ goto out;
+ }
+ if (is_write && region->readonly) {
+ goto out;
+ }
+ offset_within_region = phys - region->guest_addr;
+ if (offset_within_region + len <= region->size) {
+ host_addr = region->host_addr + offset_within_region;
+ }
+out:
+ qemu_mutex_unlock(&hostmem->current_regions_lock);
+
+ return host_addr;
+}
+
+/**
+ * Install new regions list
+ */
+static void hostmem_listener_commit(MemoryListener *listener)
+{
+ Hostmem *hostmem = container_of(listener, Hostmem, listener);
+
+ qemu_mutex_lock(&hostmem->current_regions_lock);
+ g_free(hostmem->current_regions);
+ hostmem->current_regions = hostmem->new_regions;
+ hostmem->num_current_regions = hostmem->num_new_regions;
+ qemu_mutex_unlock(&hostmem->current_regions_lock);
+
+ /* Reset new regions list */
+ hostmem->new_regions = NULL;
+ hostmem->num_new_regions = 0;
+}
+
+/**
+ * Add a MemoryRegionSection to the new regions list
+ */
+static void hostmem_append_new_region(Hostmem *hostmem,
+ MemoryRegionSection *section)
+{
+ void *ram_ptr = memory_region_get_ram_ptr(section->mr);
+ size_t num = hostmem->num_new_regions;
+ size_t new_size = (num + 1) * sizeof(hostmem->new_regions[0]);
+
+ hostmem->new_regions = g_realloc(hostmem->new_regions, new_size);
+ hostmem->new_regions[num] = (HostmemRegion){
+ .host_addr = ram_ptr + section->offset_within_region,
+ .guest_addr = section->offset_within_address_space,
+ .size = section->size,
+ .readonly = section->readonly,
+ };
+ hostmem->num_new_regions++;
+}
+
+static void hostmem_listener_append_region(MemoryListener *listener,
+ MemoryRegionSection *section)
+{
+ Hostmem *hostmem = container_of(listener, Hostmem, listener);
+
+ if (memory_region_is_ram(section->mr)) {
+ hostmem_append_new_region(hostmem, section);
+ }
+}
+
+/* We don't implement most MemoryListener callbacks, use these nop stubs */
+static void hostmem_listener_dummy(MemoryListener *listener)
+{
+}
+
+static void hostmem_listener_section_dummy(MemoryListener *listener,
+ MemoryRegionSection *section)
+{
+}
+
+static void hostmem_listener_eventfd_dummy(MemoryListener *listener,
+ MemoryRegionSection *section,
+ bool match_data, uint64_t data,
+ EventNotifier *e)
+{
+}
+
+static void hostmem_listener_coalesced_mmio_dummy(MemoryListener *listener,
+ MemoryRegionSection *section,
+ hwaddr addr, hwaddr len)
+{
+}
+
+void hostmem_init(Hostmem *hostmem)
+{
+ memset(hostmem, 0, sizeof(*hostmem));
+
+ hostmem->listener = (MemoryListener){
+ .begin = hostmem_listener_dummy,
+ .commit = hostmem_listener_commit,
+ .region_add = hostmem_listener_append_region,
+ .region_del = hostmem_listener_section_dummy,
+ .region_nop = hostmem_listener_append_region,
+ .log_start = hostmem_listener_section_dummy,
+ .log_stop = hostmem_listener_section_dummy,
+ .log_sync = hostmem_listener_section_dummy,
+ .log_global_start = hostmem_listener_dummy,
+ .log_global_stop = hostmem_listener_dummy,
+ .eventfd_add = hostmem_listener_eventfd_dummy,
+ .eventfd_del = hostmem_listener_eventfd_dummy,
+ .coalesced_mmio_add = hostmem_listener_coalesced_mmio_dummy,
+ .coalesced_mmio_del = hostmem_listener_coalesced_mmio_dummy,
+ .priority = 10,
+ };
+
+ memory_listener_register(&hostmem->listener, &address_space_memory);
+ if (hostmem->num_new_regions > 0) {
+ hostmem_listener_commit(&hostmem->listener);
+ }
+}
+
+void hostmem_finalize(Hostmem *hostmem)
+{
+ memory_listener_unregister(&hostmem->listener);
+ g_free(hostmem->new_regions);
+ g_free(hostmem->current_regions);
+}
diff --git a/hw/dataplane/hostmem.h b/hw/dataplane/hostmem.h
new file mode 100644
index 0000000..a833b74
--- /dev/null
+++ b/hw/dataplane/hostmem.h
@@ -0,0 +1,52 @@
+/*
+ * Thread-safe guest to host memory mapping
+ *
+ * Copyright 2012 Red Hat, Inc. and/or its affiliates
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef HOSTMEM_H
+#define HOSTMEM_H
+
+#include "memory.h"
+#include "qemu-thread.h"
+
+typedef struct {
+ void *host_addr;
+ hwaddr guest_addr;
+ uint64_t size;
+ bool readonly;
+} HostmemRegion;
+
+typedef struct {
+ /* The listener is invoked when regions change and a new list of regions is
+ * built up completely before they are installed.
+ */
+ MemoryListener listener;
+ HostmemRegion *new_regions;
+ size_t num_new_regions;
+
+ /* Current regions are accessed from multiple threads either to lookup
+ * addresses or to install a new list of regions. The lock protects the
+ * pointer and the regions.
+ */
+ QemuMutex current_regions_lock;
+ HostmemRegion *current_regions;
+ size_t num_current_regions;
+} Hostmem;
+
+void hostmem_init(Hostmem *hostmem);
+void hostmem_finalize(Hostmem *hostmem);
+
+/**
+ * Map a guest physical address to a pointer
+ */
+void *hostmem_lookup(Hostmem *hostmem, hwaddr phys, hwaddr len, bool is_write);
+
+#endif /* HOSTMEM_H */
--
1.8.0
next prev parent reply other threads:[~2012-11-22 15:17 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 15:16 [Qemu-devel] [PATCH v4 00/11] virtio: virtio-blk data plane Stefan Hajnoczi
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 01/11] raw-posix: add raw_get_aio_fd() for virtio-blk-data-plane Stefan Hajnoczi
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 02/11] configure: add CONFIG_VIRTIO_BLK_DATA_PLANE Stefan Hajnoczi
2012-11-22 15:16 ` Stefan Hajnoczi [this message]
2012-11-29 12:33 ` [Qemu-devel] [PATCH v4 03/11] dataplane: add host memory mapping code Michael S. Tsirkin
2012-11-29 12:45 ` Stefan Hajnoczi
2012-11-29 12:54 ` Michael S. Tsirkin
2012-11-29 12:57 ` Michael S. Tsirkin
2012-12-05 8:13 ` Stefan Hajnoczi
2012-11-29 13:54 ` Michael S. Tsirkin
2012-11-29 14:26 ` Stefan Hajnoczi
2012-11-29 14:36 ` Michael S. Tsirkin
2012-11-29 15:26 ` Paolo Bonzini
2012-12-05 8:31 ` Stefan Hajnoczi
2012-12-05 11:22 ` Michael S. Tsirkin
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 04/11] dataplane: add virtqueue vring code Stefan Hajnoczi
2012-11-29 12:50 ` Michael S. Tsirkin
2012-11-29 15:17 ` Paolo Bonzini
2012-12-05 12:57 ` Stefan Hajnoczi
2012-11-29 13:48 ` Michael S. Tsirkin
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 05/11] dataplane: add event loop Stefan Hajnoczi
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 06/11] dataplane: add Linux AIO request queue Stefan Hajnoczi
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 07/11] iov: add iov_discard() to remove data Stefan Hajnoczi
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 08/11] test-iov: add iov_discard() testcase Stefan Hajnoczi
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 09/11] iov: add qemu_iovec_concat_iov() Stefan Hajnoczi
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 10/11] dataplane: add virtio-blk data plane code Stefan Hajnoczi
2012-11-29 13:41 ` Michael S. Tsirkin
2012-11-29 14:02 ` Michael S. Tsirkin
2012-11-29 15:21 ` Paolo Bonzini
2012-11-29 15:27 ` Michael S. Tsirkin
2012-11-29 15:47 ` Paolo Bonzini
2012-11-30 13:57 ` Stefan Hajnoczi
2012-11-22 15:16 ` [Qemu-devel] [PATCH v4 11/11] virtio-blk: add x-data-plane=on|off performance feature Stefan Hajnoczi
2012-11-29 13:12 ` Michael S. Tsirkin
2012-11-29 14:45 ` Stefan Hajnoczi
2012-11-29 14:55 ` Michael S. Tsirkin
2012-12-04 11:20 ` Michael S. Tsirkin
2012-12-04 14:19 ` Stefan Hajnoczi
2012-11-29 9:18 ` [Qemu-devel] [PATCH v4 00/11] virtio: virtio-blk data plane Stefan Hajnoczi
2012-11-29 12:03 ` Paolo Bonzini
2012-11-29 14:09 ` Michael S. Tsirkin
2012-11-29 14:48 ` Stefan Hajnoczi
2012-11-29 15:19 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353597412-12232-4-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=asias@redhat.com \
--cc=blauwirbel@gmail.com \
--cc=khoa@us.ibm.com \
--cc=kwolf@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).