From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 08/20] apci: switch evt to memory api
Date: Fri, 23 Nov 2012 16:48:19 +0100 [thread overview]
Message-ID: <1353685711-24573-9-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1353685711-24573-1-git-send-email-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/acpi.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++--
hw/acpi.h | 6 ++++--
hw/acpi_piix4.c | 18 +-----------------
hw/vt82c686.c | 18 +-----------------
4 files changed, 53 insertions(+), 38 deletions(-)
diff --git a/hw/acpi.c b/hw/acpi.c
index 956db95..e58e45f 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -275,7 +275,7 @@ uint16_t acpi_pm1_evt_get_sts(ACPIREGS *ar)
return ar->pm1.evt.sts;
}
-void acpi_pm1_evt_write_sts(ACPIREGS *ar, uint16_t val)
+static void acpi_pm1_evt_write_sts(ACPIREGS *ar, uint16_t val)
{
uint16_t pm1_sts = acpi_pm1_evt_get_sts(ar);
if (pm1_sts & val & ACPI_BITMASK_TIMER_STATUS) {
@@ -285,7 +285,7 @@ void acpi_pm1_evt_write_sts(ACPIREGS *ar, uint16_t val)
ar->pm1.evt.sts &= ~val;
}
-void acpi_pm1_evt_write_en(ACPIREGS *ar, uint16_t val)
+static void acpi_pm1_evt_write_en(ACPIREGS *ar, uint16_t val)
{
ar->pm1.evt.en = val;
qemu_system_wakeup_enable(QEMU_WAKEUP_REASON_RTC,
@@ -310,6 +310,51 @@ void acpi_pm1_evt_reset(ACPIREGS *ar)
qemu_system_wakeup_enable(QEMU_WAKEUP_REASON_PMTIMER, 0);
}
+static uint64_t acpi_pm_evt_read(void *opaque, hwaddr addr, unsigned width)
+{
+ ACPIREGS *ar = opaque;
+ switch (addr) {
+ case 0:
+ return acpi_pm1_evt_get_sts(ar);
+ case 2:
+ return ar->pm1.evt.en;
+ default:
+ return 0;
+ }
+}
+
+static void acpi_pm_evt_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned width)
+{
+ ACPIREGS *ar = opaque;
+ switch (addr) {
+ case 0:
+ acpi_pm1_evt_write_sts(ar, val);
+ ar->pm1.evt.update_sci(ar);
+ break;
+ case 2:
+ acpi_pm1_evt_write_en(ar, val);
+ ar->pm1.evt.update_sci(ar);
+ break;
+ }
+}
+
+static const MemoryRegionOps acpi_pm_evt_ops = {
+ .read = acpi_pm_evt_read,
+ .write = acpi_pm_evt_write,
+ .valid.min_access_size = 2,
+ .valid.max_access_size = 2,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+void acpi_pm1_evt_init(ACPIREGS *ar, acpi_update_sci_fn update_sci,
+ MemoryRegion *parent)
+{
+ ar->pm1.evt.update_sci = update_sci;
+ memory_region_init_io(&ar->pm1.evt.io, &acpi_pm_evt_ops, ar, "acpi-evt", 4);
+ memory_region_add_subregion(parent, 0, &ar->pm1.evt.io);
+}
+
/* ACPI PM_TMR */
void acpi_pm_tmr_update(ACPIREGS *ar, bool enable)
{
diff --git a/hw/acpi.h b/hw/acpi.h
index 97aaab8..918d7f5 100644
--- a/hw/acpi.h
+++ b/hw/acpi.h
@@ -91,8 +91,10 @@ struct ACPIPMTimer {
};
struct ACPIPM1EVT {
+ MemoryRegion io;
uint16_t sts;
uint16_t en;
+ acpi_update_sci_fn update_sci;
};
struct ACPIPM1CNT {
@@ -135,10 +137,10 @@ static inline int64_t acpi_pm_tmr_get_clock(void)
/* PM1a_EVT: piix and ich9 don't implement PM1b. */
uint16_t acpi_pm1_evt_get_sts(ACPIREGS *ar);
-void acpi_pm1_evt_write_sts(ACPIREGS *ar, uint16_t val);
-void acpi_pm1_evt_write_en(ACPIREGS *ar, uint16_t val);
void acpi_pm1_evt_power_down(ACPIREGS *ar);
void acpi_pm1_evt_reset(ACPIREGS *ar);
+void acpi_pm1_evt_init(ACPIREGS *ar, acpi_update_sci_fn update_sci,
+ MemoryRegion *parent);
/* PM1a_CNT: piix and ich9 don't implement PM1b CNT. */
void acpi_pm1_cnt_init(ACPIREGS *ar, MemoryRegion *parent);
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index c68a0e7..e4fe6f1 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -113,22 +113,12 @@ static void pm_tmr_timer(ACPIREGS *ar)
static void pm_ioport_write(void *opaque, hwaddr addr, uint64_t val,
unsigned width)
{
- PIIX4PMState *s = opaque;
-
if (width != 2) {
PIIX4_DPRINTF("PM write port=0x%04x width=%d val=0x%08x\n",
(unsigned)addr, width, (unsigned)val);
}
switch(addr) {
- case 0x00:
- acpi_pm1_evt_write_sts(&s->ar, val);
- pm_update_sci(s);
- break;
- case 0x02:
- acpi_pm1_evt_write_en(&s->ar, val);
- pm_update_sci(s);
- break;
default:
break;
}
@@ -138,16 +128,9 @@ static void pm_ioport_write(void *opaque, hwaddr addr, uint64_t val,
static uint64_t pm_ioport_read(void *opaque, hwaddr addr, unsigned width)
{
- PIIX4PMState *s = opaque;
uint32_t val;
switch(addr) {
- case 0x00:
- val = acpi_pm1_evt_get_sts(&s->ar);
- break;
- case 0x02:
- val = s->ar.pm1.evt.en;
- break;
default:
val = 0;
break;
@@ -456,6 +439,7 @@ static int piix4_pm_initfn(PCIDevice *dev)
memory_region_init_io(&s->io, &pm_io_ops, s, "piix4-pm", 64);
acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
+ acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
acpi_pm1_cnt_init(&s->ar, &s->io);
acpi_gpe_init(&s->ar, GPE_LEN);
diff --git a/hw/vt82c686.c b/hw/vt82c686.c
index b8f9c19..86ff7f9 100644
--- a/hw/vt82c686.c
+++ b/hw/vt82c686.c
@@ -199,18 +199,8 @@ static void pm_tmr_timer(ACPIREGS *ar)
static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
{
- VT686PMState *s = opaque;
-
addr &= 0x0f;
switch (addr) {
- case 0x00:
- acpi_pm1_evt_write_sts(&s->ar, val);
- pm_update_sci(s);
- break;
- case 0x02:
- acpi_pm1_evt_write_en(&s->ar, val);
- pm_update_sci(s);
- break;
default:
break;
}
@@ -219,17 +209,10 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
{
- VT686PMState *s = opaque;
uint32_t val;
addr &= 0x0f;
switch (addr) {
- case 0x00:
- val = acpi_pm1_evt_get_sts(&s->ar);
- break;
- case 0x02:
- val = s->ar.pm1.evt.en;
- break;
default:
val = 0;
break;
@@ -438,6 +421,7 @@ static int vt82c686b_pm_initfn(PCIDevice *dev)
memory_region_init_io(&s->io, &pm_io_ops, s, "vt82c686-pm", 64);
acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
+ acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
acpi_pm1_cnt_init(&s->ar, &s->io);
pm_smbus_init(&s->dev.qdev, &s->smb);
--
1.7.1
next prev parent reply other threads:[~2012-11-23 15:48 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-23 15:48 [Qemu-devel] [PATCH 00/20] acpi: switch to memory api Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 01/20] apci: switch piix4 " Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 02/20] apci: switch ich9 " Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 03/20] apci: switch vt82c686 " Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 04/20] apci: switch timer " Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 05/20] apci: switch timer to memory api [ich9] Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 06/20] apci: switch cnt to memory api Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 07/20] apci: switch cnt to memory api [ich9] Gerd Hoffmann
2012-11-23 15:48 ` Gerd Hoffmann [this message]
2012-11-23 15:48 ` [Qemu-devel] [PATCH 09/20] apci: switch evt " Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 10/20] acpi: cleanup piix4 memory region Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 11/20] acpi: cleanup vt82c686 " Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 12/20] apci: switch ich9 gpe to memory api Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 13/20] apci: switch ich9 smi " Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 14/20] acpi: cleanup ich9 memory region Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 15/20] acpi: switch smbus to memory api Gerd Hoffmann
2012-11-26 15:18 ` Andreas Färber
2012-11-27 8:47 ` Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 16/20] acpi: fix piix4 smbus mapping Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 17/20] apci: switch piix4 gpe to memory api Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 18/20] acpi: remove acpi_gpe_blk Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 19/20] apci: switch piix4 pci hotplug to memory api Gerd Hoffmann
2012-11-23 15:48 ` [Qemu-devel] [PATCH 20/20] q35: update lpc pci config space according to configured devices Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353685711-24573-9-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).