From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-stable@nongnu.org
Cc: aliguori@us.ibm.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] Patch Round-up for stable 1.2.2, freeze Wednesday
Date: Mon, 3 Dec 2012 16:08:24 -0600 [thread overview]
Message-ID: <1354572547-21271-1-git-send-email-mdroth@linux.vnet.ibm.com> (raw)
Hi everyone,
The following new patches are queued for QEMU stable v1.2.2:
https://github.com/mdroth/qemu/commits/stable-1.2-staging
The release is planned for Tuesday, 12-11-2012:
http://wiki.qemu.org/Planning/1.2
Please CC qemu-stable@nongnu.org on any patches you think should be
included in the release. The cut-off date is 12-05-2012 for new patches.
Testing/feedback is greatly appreciated.
Thanks!
e1a0ffb e1000: Discard packets that are too long if !SBP and !LPE (Michael Contreras)
178ef3a stream: fix ratelimit_set_speed (Dietmar Maurer)
cd00334 usb: fail usbdevice_create() when there is no USB bus (Stefan Hajnoczi)
8c9283c qxl: reload memslots after migration, when qxl is in UNDEFINED mode (Yonit Halperin)
bf47da4 virtio-scsi: Fix subtle (guest) endian bug (David Gibson)
ea08f3a virtio-scsi: Fix some endian bugs with virtio-scsi (David Gibson)
cef2566 iscsi: do not assume device is zero initialized (Peter Lieven)
707f2b6 iscsi: fix deadlock during login (Peter Lieven)
972a2bf iscsi: fix segfault in url parsing (Peter Lieven)
ffffff0 qapi: fix qapi_dealloc_type_size parameter type (Bruce Rogers)
54c6c5a qapi: handle visitor->type_size() in QapiDeallocVisitor (Stefan Hajnoczi)
f05a3da qom: fix refcount of non-heap-allocated objects (Paolo Bonzini)
0aad8f1 PPC: Fix missing TRACE exception (Julio Guerra)
a99cb0d hmp: do not crash on invalid SCSI hotplug (Paolo Bonzini)
5e19e49 qom: dynamic_cast of NULL is always NULL (Paolo Bonzini)
4fb9656 block: Fix regression for MinGW (assertion caused by short string) (Stefan Weil)
38c6d17 tci: Fix type of tci_read_label (Richard Henderson)
600a9ef qcow2: Fix refcount table size calculation (Kevin Wolf)
ea79e15 configure: avoid compiler warning in pipe2 detection (Bruce Rogers)
4a8e490 target-openrisc: remove conflicting definitions from cpu.h (Aurelien Jarno)
ede76ed tcg/arm: fix cross-endian qemu_st16 (Aurelien Jarno)
ac914c1 tcg/arm: fix TLB access in qemu-ld/st ops (Aurelien Jarno)
357414d target-mips: fix wrong microMIPS opcode encoding (陳韋任 (Wei-Ren Chen))
f6b803d mips/malta: fix CBUS UART interrupt pin (Aurelien Jarno)
879c264 nbd: fixes to read-only handling (Paolo Bonzini)
382a582 m68k: Return semihosting errno values correctly (Meador Inge)
5c0d5ae tools: initialize main loop before block layer (Paolo Bonzini)
3dd59b4 xhci: fix usb name in caps (Gerd Hoffmann)
03e0441 target-sparc64: disable VGA cirrus (Aurelien Jarno)
db6e5ab PPC: Bamboo: Fix memory size DT property (Alexander Graf)
7817b8d s390x: fix -initrd in virtio machine (Alexander Graf)
0dfd821 memory: fix rendering of a region obscured by another (Avi Kivity)
e16d81d e1000: drop check_rxov, always treat RX ring with RDH == RDT as empty (Dmitry Fleytman)
3dfbc51 target-i386: Allow tsc-frequency to be larger then 2.147G (Don Slutz)
eb63b0c hw: Fix return value check for bdrv_read, bdrv_write (Stefan Weil)
4843c92 rtc: fix overflow in mktimegm (Paolo Bonzini)
a106eaa qxl: always update displaysurface on resize (Gerd Hoffmann)
472da83 hw/qxl: qxl_dirty_surfaces: use uintptr_t (Alon Levy)
85c91ea uhci: Raise interrupt when requested even for non active tds (Hans de Goede)
5af7caa vnc: fix "info vnc" with "-vnc ..., reverse=on" (Paolo Bonzini)
0ae18b3 ui/vnc: Only report/use TIGHT_PNG encoding if enabled. (Joel Martin)
5a99c8c fix CONFIG_QEMU_HELPERDIR generation again (Michael Tokarev)
029eae1 configure: Fix CONFIG_QEMU_HELPERDIR generation (Jan Kiszka)
block.c | 3 +-
block/iscsi.c | 260 +++++++++++------------------------
block/qcow2-refcount.c | 3 +-
configure | 5 +-
cutils.c | 2 +-
default-configs/sparc64-softmmu.mak | 1 -
hw/e1000.c | 17 ++-
hw/mips_malta.c | 3 +-
hw/nand.c | 34 +++--
hw/onenand.c | 2 +-
hw/pci-hotplug.c | 8 +-
hw/ppc440_bamboo.c | 2 +-
hw/qxl-render.c | 4 -
hw/qxl.c | 5 +-
hw/s390-virtio.c | 4 +-
hw/sd.c | 16 ++-
hw/usb/bus.c | 7 +
hw/usb/hcd-uhci.c | 10 +-
hw/usb/hcd-xhci.c | 4 +-
hw/virtio-scsi.c | 12 +-
include/qemu/ratelimit.h | 2 +-
memory.c | 12 +-
nbd.c | 25 ++--
qapi/qapi-dealloc-visitor.c | 6 +
qemu-img.c | 3 +-
qemu-io.c | 3 +-
qom/object.c | 6 +-
target-i386/cpu.c | 2 +-
target-m68k/m68k-semi.c | 2 +-
target-mips/translate.c | 2 +-
target-openrisc/cpu.h | 18 ---
target-ppc/translate.c | 3 +-
tcg/arm/tcg-target.c | 98 ++++++++-----
tci.c | 4 +-
tests/rtc-test.c | 45 ++++++
ui/vnc.c | 6 +
36 files changed, 316 insertions(+), 323 deletions(-)
next reply other threads:[~2012-12-03 22:10 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-03 22:08 Michael Roth [this message]
2012-12-03 22:08 ` [Qemu-devel] [PATCH 01/43] configure: Fix CONFIG_QEMU_HELPERDIR generation Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 02/43] fix CONFIG_QEMU_HELPERDIR generation again Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 03/43] ui/vnc: Only report/use TIGHT_PNG encoding if enabled Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 04/43] vnc: fix "info vnc" with "-vnc ..., reverse=on" Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 05/43] uhci: Raise interrupt when requested even for non active tds Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 06/43] hw/qxl: qxl_dirty_surfaces: use uintptr_t Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 07/43] qxl: always update displaysurface on resize Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 08/43] rtc: fix overflow in mktimegm Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 09/43] hw: Fix return value check for bdrv_read, bdrv_write Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 10/43] target-i386: Allow tsc-frequency to be larger then 2.147G Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 11/43] e1000: drop check_rxov, always treat RX ring with RDH == RDT as empty Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 12/43] memory: fix rendering of a region obscured by another Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 13/43] s390x: fix -initrd in virtio machine Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 14/43] PPC: Bamboo: Fix memory size DT property Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 15/43] target-sparc64: disable VGA cirrus Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 16/43] xhci: fix usb name in caps Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 17/43] tools: initialize main loop before block layer Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 18/43] m68k: Return semihosting errno values correctly Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 19/43] nbd: fixes to read-only handling Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 20/43] mips/malta: fix CBUS UART interrupt pin Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 21/43] target-mips: fix wrong microMIPS opcode encoding Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 22/43] tcg/arm: fix TLB access in qemu-ld/st ops Michael Roth
2013-01-17 16:55 ` Peter Maydell
2012-12-03 22:08 ` [Qemu-devel] [PATCH 23/43] tcg/arm: fix cross-endian qemu_st16 Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 24/43] target-openrisc: remove conflicting definitions from cpu.h Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 25/43] configure: avoid compiler warning in pipe2 detection Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 26/43] qcow2: Fix refcount table size calculation Michael Roth
2012-12-03 22:08 ` [Qemu-devel] [PATCH 27/43] tci: Fix type of tci_read_label Michael Roth
2012-12-03 22:25 ` [Qemu-devel] [PATCH 28/43] block: Fix regression for MinGW (assertion caused by short string) Michael Roth
2012-12-03 22:25 ` [Qemu-devel] [PATCH 29/43] qom: dynamic_cast of NULL is always NULL Michael Roth
2012-12-03 22:25 ` [Qemu-devel] [PATCH 30/43] hmp: do not crash on invalid SCSI hotplug Michael Roth
2012-12-03 22:25 ` [Qemu-devel] [PATCH 31/43] PPC: Fix missing TRACE exception Michael Roth
2012-12-03 22:25 ` [Qemu-devel] [PATCH 32/43] qom: fix refcount of non-heap-allocated objects Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 33/43] qapi: handle visitor->type_size() in QapiDeallocVisitor Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 34/43] qapi: fix qapi_dealloc_type_size parameter type Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 35/43] iscsi: fix segfault in url parsing Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 36/43] iscsi: fix deadlock during login Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 37/43] iscsi: do not assume device is zero initialized Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 38/43] virtio-scsi: Fix some endian bugs with virtio-scsi Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 39/43] virtio-scsi: Fix subtle (guest) endian bug Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 40/43] qxl: reload memslots after migration, when qxl is in UNDEFINED mode Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 41/43] usb: fail usbdevice_create() when there is no USB bus Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 42/43] stream: fix ratelimit_set_speed Michael Roth
2012-12-03 22:44 ` [Qemu-devel] [PATCH 43/43] e1000: Discard packets that are too long if !SBP and !LPE Michael Roth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1354572547-21271-1-git-send-email-mdroth@linux.vnet.ibm.com \
--to=mdroth@linux.vnet.ibm.com \
--cc=aliguori@us.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).