From: Scott Wood <scottwood@freescale.com>
To: Alexander Graf <agraf@suse.de>
Cc: Scott Wood <scottwood@freescale.com>,
qemu-ppc@nongnu.org, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 01/15] openpic: fix debug prints
Date: Fri, 21 Dec 2012 20:15:38 -0600 [thread overview]
Message-ID: <1356142552-13453-2-git-send-email-scottwood@freescale.com> (raw)
In-Reply-To: <1356142552-13453-1-git-send-email-scottwood@freescale.com>
Fix various format errors when debug prints are enabled. Also
cause error checking to happen even when debug prints are not
enabled, and consistently use 0x for hex output.
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
hw/openpic.c | 40 ++++++++++++++++++++++++----------------
1 file changed, 24 insertions(+), 16 deletions(-)
diff --git a/hw/openpic.c b/hw/openpic.c
index 93e8208..72a5bc9 100644
--- a/hw/openpic.c
+++ b/hw/openpic.c
@@ -45,7 +45,11 @@
#ifdef DEBUG_OPENPIC
#define DPRINTF(fmt, ...) do { printf(fmt , ## __VA_ARGS__); } while (0)
#else
-#define DPRINTF(fmt, ...) do { } while (0)
+#define DPRINTF(fmt, ...) do { \
+ if (0) { \
+ printf(fmt , ## __VA_ARGS__); \
+ } \
+ } while (0)
#endif
#define MAX_CPU 15
@@ -421,7 +425,7 @@ static void openpic_set_irq(void *opaque, int n_IRQ, int level)
IRQ_src_t *src;
src = &opp->src[n_IRQ];
- DPRINTF("openpic: set irq %d = %d ipvp=%08x\n",
+ DPRINTF("openpic: set irq %d = %d ipvp=0x%08x\n",
n_IRQ, level, src->ipvp);
if (src->ipvp & IPVP_SENSE_MASK) {
/* level-sensitive irq */
@@ -511,7 +515,8 @@ static void openpic_gbl_write(void *opaque, hwaddr addr, uint64_t val,
IRQ_dst_t *dst;
int idx;
- DPRINTF("%s: addr " TARGET_FMT_plx " <= %08x\n", __func__, addr, val);
+ DPRINTF("%s: addr %#" HWADDR_PRIx " <= 0x%08" PRIx64 "\n",
+ __func__, addr, val);
if (addr & 0xF)
return;
switch (addr) {
@@ -573,7 +578,7 @@ static uint64_t openpic_gbl_read(void *opaque, hwaddr addr, unsigned len)
OpenPICState *opp = opaque;
uint32_t retval;
- DPRINTF("%s: addr " TARGET_FMT_plx "\n", __func__, addr);
+ DPRINTF("%s: addr %#" HWADDR_PRIx "\n", __func__, addr);
retval = 0xFFFFFFFF;
if (addr & 0xF)
return retval;
@@ -619,7 +624,7 @@ static uint64_t openpic_gbl_read(void *opaque, hwaddr addr, unsigned len)
default:
break;
}
- DPRINTF("%s: => %08x\n", __func__, retval);
+ DPRINTF("%s: => 0x%08x\n", __func__, retval);
return retval;
}
@@ -630,7 +635,8 @@ static void openpic_tmr_write(void *opaque, hwaddr addr, uint64_t val,
OpenPICState *opp = opaque;
int idx;
- DPRINTF("%s: addr %08x <= %08x\n", __func__, addr, val);
+ DPRINTF("%s: addr %#" HWADDR_PRIx " <= 0x%08" PRIx64 "\n",
+ __func__, addr, val);
if (addr & 0xF)
return;
idx = (addr >> 6) & 0x3;
@@ -667,7 +673,7 @@ static uint64_t openpic_tmr_read(void *opaque, hwaddr addr, unsigned len)
uint32_t retval = -1;
int idx;
- DPRINTF("%s: addr %08x\n", __func__, addr);
+ DPRINTF("%s: addr %#" HWADDR_PRIx "\n", __func__, addr);
if (addr & 0xF) {
goto out;
}
@@ -693,7 +699,7 @@ static uint64_t openpic_tmr_read(void *opaque, hwaddr addr, unsigned len)
}
out:
- DPRINTF("%s: => %08x\n", __func__, retval);
+ DPRINTF("%s: => 0x%08x\n", __func__, retval);
return retval;
}
@@ -704,7 +710,8 @@ static void openpic_src_write(void *opaque, hwaddr addr, uint64_t val,
OpenPICState *opp = opaque;
int idx;
- DPRINTF("%s: addr %08x <= %08x\n", __func__, addr, val);
+ DPRINTF("%s: addr %#" HWADDR_PRIx " <= 0x%08" PRIx64 "\n",
+ __func__, addr, val);
if (addr & 0xF)
return;
addr = addr & 0xFFF0;
@@ -724,7 +731,7 @@ static uint64_t openpic_src_read(void *opaque, uint64_t addr, unsigned len)
uint32_t retval;
int idx;
- DPRINTF("%s: addr %08x\n", __func__, addr);
+ DPRINTF("%s: addr %#" HWADDR_PRIx "\n", __func__, addr);
retval = 0xFFFFFFFF;
if (addr & 0xF)
return retval;
@@ -737,7 +744,7 @@ static uint64_t openpic_src_read(void *opaque, uint64_t addr, unsigned len)
/* EXVP / IFEVP / IEEVP */
retval = read_IRQreg_ipvp(opp, idx);
}
- DPRINTF("%s: => %08x\n", __func__, retval);
+ DPRINTF("%s: => 0x%08x\n", __func__, retval);
return retval;
}
@@ -749,7 +756,8 @@ static void openpic_msi_write(void *opaque, hwaddr addr, uint64_t val,
int idx = opp->irq_msi;
int srs, ibs;
- DPRINTF("%s: addr " TARGET_FMT_plx " <= %08x\n", __func__, addr, val);
+ DPRINTF("%s: addr %#" HWADDR_PRIx " <= 0x%08" PRIx64 "\n",
+ __func__, addr, val);
if (addr & 0xF) {
return;
}
@@ -774,7 +782,7 @@ static uint64_t openpic_msi_read(void *opaque, hwaddr addr, unsigned size)
uint64_t r = 0;
int i, srs;
- DPRINTF("%s: addr " TARGET_FMT_plx "\n", __func__, addr);
+ DPRINTF("%s: addr %#" HWADDR_PRIx "\n", __func__, addr);
if (addr & 0xF) {
return -1;
}
@@ -812,7 +820,7 @@ static void openpic_cpu_write_internal(void *opaque, hwaddr addr,
IRQ_dst_t *dst;
int s_IRQ, n_IRQ;
- DPRINTF("%s: cpu %d addr " TARGET_FMT_plx " <= %08x\n", __func__, idx,
+ DPRINTF("%s: cpu %d addr %#" HWADDR_PRIx " <= 0x%08x\n", __func__, idx,
addr, val);
if (idx < 0) {
@@ -882,7 +890,7 @@ static uint32_t openpic_cpu_read_internal(void *opaque, hwaddr addr,
uint32_t retval;
int n_IRQ;
- DPRINTF("%s: cpu %d addr " TARGET_FMT_plx "\n", __func__, idx, addr);
+ DPRINTF("%s: cpu %d addr %#" HWADDR_PRIx "\n", __func__, idx, addr);
retval = 0xFFFFFFFF;
if (idx < 0) {
@@ -949,7 +957,7 @@ static uint32_t openpic_cpu_read_internal(void *opaque, hwaddr addr,
default:
break;
}
- DPRINTF("%s: => %08x\n", __func__, retval);
+ DPRINTF("%s: => 0x%08x\n", __func__, retval);
return retval;
}
--
1.7.9.5
next prev parent reply other threads:[~2012-12-22 2:16 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-22 2:15 [Qemu-devel] [PATCH 00/15] openpic: cleanups and fixes Scott Wood
2012-12-22 2:15 ` Scott Wood [this message]
2013-01-03 17:31 ` [Qemu-devel] [PATCH 01/15] openpic: fix debug prints Alexander Graf
2013-01-03 19:41 ` Scott Wood
2012-12-22 2:15 ` [Qemu-devel] [PATCH 02/15] openpic: lower interrupt when reading the MSI register Scott Wood
2013-01-03 17:52 ` Alexander Graf
2012-12-22 2:15 ` [Qemu-devel] [PATCH 03/15] openpic: fix sense and priority bits Scott Wood
2013-01-03 17:51 ` Alexander Graf
2013-01-03 20:12 ` Scott Wood
2012-12-22 2:15 ` [Qemu-devel] [PATCH 04/15] ppc/booke: fix crit/mcheck/debug exceptions Scott Wood
2013-01-03 17:57 ` Alexander Graf
2012-12-22 2:15 ` [Qemu-devel] [PATCH 05/15] openpic: make register names correspond better with hw docs Scott Wood
2013-01-03 18:18 ` Alexander Graf
2012-12-22 2:15 ` [Qemu-devel] [PATCH 06/15] openpic: rework critical interrupt support Scott Wood
2013-01-03 18:31 ` Alexander Graf
2013-01-03 23:07 ` Scott Wood
2013-01-04 8:04 ` Alexander Graf
2013-01-04 20:46 ` [Qemu-devel] [Qemu-ppc] " Blue Swirl
2013-01-04 20:49 ` Scott Wood
2013-01-04 21:17 ` Blue Swirl
2013-01-04 21:25 ` Scott Wood
2012-12-22 2:15 ` [Qemu-devel] [PATCH 07/15] openpic: make ctpr signed Scott Wood
2013-01-03 18:33 ` Alexander Graf
2012-12-22 2:15 ` [Qemu-devel] [PATCH 08/15] openpic/fsl: critical interrupts ignore mask before v4.1 Scott Wood
2013-01-03 18:37 ` Alexander Graf
2012-12-22 2:15 ` [Qemu-devel] [PATCH 09/15] openpic: always call IRQ_check from IRQ_get_next Scott Wood
2013-01-03 18:42 ` Alexander Graf
2013-01-03 20:09 ` Scott Wood
2012-12-22 2:15 ` [Qemu-devel] [PATCH 10/15] Revert "openpic: Accelerate pending irq search" Scott Wood
2012-12-22 2:15 ` [Qemu-devel] [PATCH 11/15] openpic: use standard bitmap operations Scott Wood
2013-01-03 18:49 ` Alexander Graf
2012-12-22 2:15 ` [Qemu-devel] [PATCH 12/15] openpic: IRQ_check: search the queue a word at a time Scott Wood
2013-01-03 18:53 ` Alexander Graf
2013-01-03 20:07 ` Scott Wood
2013-01-03 20:31 ` Alexander Graf
2013-01-03 20:32 ` Scott Wood
2013-01-03 20:57 ` Alexander Graf
2013-01-03 21:52 ` Scott Wood
2012-12-22 2:15 ` [Qemu-devel] [PATCH 13/15] openpic: add some bounds checking for IRQ numbers Scott Wood
2013-01-03 18:55 ` Alexander Graf
2013-01-03 19:54 ` [Qemu-devel] [Qemu-ppc] " Scott Wood
2013-01-03 21:07 ` Alexander Graf
2013-01-03 21:20 ` Scott Wood
2012-12-22 2:15 ` [Qemu-devel] [PATCH 14/15] openpic: move IACK to its own function Scott Wood
2013-01-03 18:59 ` Alexander Graf
2012-12-22 2:15 ` [Qemu-devel] [PATCH 15/15] openpic: fix CTPR and de-assertion of interrupts Scott Wood
2013-01-03 19:00 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1356142552-13453-2-git-send-email-scottwood@freescale.com \
--to=scottwood@freescale.com \
--cc=agraf@suse.de \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).