From: "Benoît Canet" <benoit@irqsave.net>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, pbonzini@redhat.com,
"Benoît Canet" <benoit@irqsave.net>,
stefanha@redhat.com
Subject: [Qemu-devel] [RFC V4 14/30] qcow2-cache: Allow to choose table size at creation.
Date: Wed, 2 Jan 2013 17:16:17 +0100 [thread overview]
Message-ID: <1357143393-29832-15-git-send-email-benoit@irqsave.net> (raw)
In-Reply-To: <1357143393-29832-1-git-send-email-benoit@irqsave.net>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
---
block/qcow2-cache.c | 12 +++++++-----
block/qcow2.c | 5 +++--
block/qcow2.h | 3 ++-
3 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/block/qcow2-cache.c b/block/qcow2-cache.c
index 2f3114e..83f2814 100644
--- a/block/qcow2-cache.c
+++ b/block/qcow2-cache.c
@@ -40,20 +40,22 @@ struct Qcow2Cache {
struct Qcow2Cache* depends;
int size;
bool depends_on_flush;
+ int table_size;
};
-Qcow2Cache *qcow2_cache_create(BlockDriverState *bs, int num_tables)
+Qcow2Cache *qcow2_cache_create(BlockDriverState *bs, int num_tables,
+ int table_size)
{
- BDRVQcowState *s = bs->opaque;
Qcow2Cache *c;
int i;
c = g_malloc0(sizeof(*c));
c->size = num_tables;
c->entries = g_malloc0(sizeof(*c->entries) * num_tables);
+ c->table_size = table_size;
for (i = 0; i < c->size; i++) {
- c->entries[i].table = qemu_blockalign(bs, s->cluster_size);
+ c->entries[i].table = qemu_blockalign(bs, c->table_size);
}
return c;
@@ -121,7 +123,7 @@ static int qcow2_cache_entry_flush(BlockDriverState *bs, Qcow2Cache *c, int i)
}
ret = bdrv_pwrite(bs->file, c->entries[i].offset, c->entries[i].table,
- s->cluster_size);
+ c->table_size);
if (ret < 0) {
return ret;
}
@@ -253,7 +255,7 @@ static int qcow2_cache_do_get(BlockDriverState *bs, Qcow2Cache *c,
BLKDBG_EVENT(bs->file, BLKDBG_L2_LOAD);
}
- ret = bdrv_pread(bs->file, offset, c->entries[i].table, s->cluster_size);
+ ret = bdrv_pread(bs->file, offset, c->entries[i].table, c->table_size);
if (ret < 0) {
return ret;
}
diff --git a/block/qcow2.c b/block/qcow2.c
index 9a7177b..499e939 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -450,8 +450,9 @@ static int qcow2_open(BlockDriverState *bs, int flags)
}
/* alloc L2 table/refcount block cache */
- s->l2_table_cache = qcow2_cache_create(bs, L2_CACHE_SIZE);
- s->refcount_block_cache = qcow2_cache_create(bs, REFCOUNT_CACHE_SIZE);
+ s->l2_table_cache = qcow2_cache_create(bs, L2_CACHE_SIZE, s->cluster_size);
+ s->refcount_block_cache = qcow2_cache_create(bs, REFCOUNT_CACHE_SIZE,
+ s->cluster_size);
s->cluster_cache = g_malloc(s->cluster_size);
/* one more sector for decompressed data alignment */
diff --git a/block/qcow2.h b/block/qcow2.h
index 9add0f1..4932750 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -440,7 +440,8 @@ void qcow2_free_snapshots(BlockDriverState *bs);
int qcow2_read_snapshots(BlockDriverState *bs);
/* qcow2-cache.c functions */
-Qcow2Cache *qcow2_cache_create(BlockDriverState *bs, int num_tables);
+Qcow2Cache *qcow2_cache_create(BlockDriverState *bs, int num_tables,
+ int table_size);
int qcow2_cache_destroy(BlockDriverState* bs, Qcow2Cache *c);
void qcow2_cache_entry_mark_dirty(Qcow2Cache *c, void *table);
--
1.7.10.4
next prev parent reply other threads:[~2013-01-02 16:17 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-02 16:16 [Qemu-devel] [RFC V4 00/30] QCOW2 deduplication Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 01/30] qcow2: Add deduplication to the qcow2 specification Benoît Canet
2013-01-03 18:18 ` Eric Blake
2013-01-04 14:49 ` Benoît Canet
2013-01-16 14:50 ` Benoît Canet
2013-01-16 15:58 ` Eric Blake
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 02/30] qcow2: Add deduplication structures and fields Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 03/30] qcow2: Add qcow2_dedup_read_missing_and_concatenate Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 04/30] qcow2: Make update_refcount public Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 05/30] qcow2: Create a way to link to l2 tables when deduplicating Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 06/30] qcow2: Add qcow2_dedup and related functions Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 07/30] qcow2: Add qcow2_dedup_store_new_hashes Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 08/30] qcow2: Implement qcow2_compute_cluster_hash Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 09/30] qcow2: Extract qcow2_dedup_grow_table Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 10/30] qcow2: Add qcow2_dedup_grow_table and use it Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 11/30] qcow2: create function to load deduplication hashes at startup Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 12/30] qcow2: Load and save deduplication table header extension Benoît Canet
2013-01-05 0:02 ` Eric Blake
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 13/30] qcow2: Extract qcow2_do_table_init Benoît Canet
2013-01-02 16:16 ` Benoît Canet [this message]
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 15/30] qcow2: Add qcow2_dedup_init and qcow2_dedup_close Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 16/30] qcow2: Extract qcow2_add_feature and qcow2_remove_feature Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 17/30] block: Add qemu-img dedup create option Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 18/30] qcow2: Behave correctly when refcount reach 0 or 2^16 Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 19/30] qcow2: Integrate deduplication in qcow2_co_writev loop Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 20/30] qcow2: Serialize write requests when deduplication is activated Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 21/30] qcow2: Add verification of dedup table Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 22/30] qcow2: Adapt checking of QCOW_OFLAG_COPIED for dedup Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 23/30] qcow2: Add check_dedup_l2 in order to check l2 of dedup table Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 24/30] qcow2: Do not overwrite existing entries with QCOW_OFLAG_COPIED Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 25/30] qcow2: Integrate SKEIN hash algorithm in deduplication Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 26/30] qcow2: Add lazy refcounts to deduplication to prevent qcow2_cache_set_dependency loops Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 27/30] qcow2: Use large L2 table for deduplication Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 28/30] qcow: Set dedup cluster block size to 64KB Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 29/30] qcow2: init and cleanup deduplication Benoît Canet
2013-01-02 16:16 ` [Qemu-devel] [RFC V4 30/30] qemu-iotests: Filter dedup=on/off so existing tests don't break Benoît Canet
2013-01-02 16:42 ` Eric Blake
2013-01-02 16:50 ` Benoît Canet
2013-01-02 17:10 ` [Qemu-devel] [RFC V4 00/30] QCOW2 deduplication Troy Benjegerdes
2013-01-02 17:33 ` Benoît Canet
2013-01-02 18:01 ` Eric Blake
2013-01-02 18:16 ` Benoît Canet
2013-01-02 18:26 ` Troy Benjegerdes
2013-01-02 18:40 ` Benoît Canet
2013-01-02 18:47 ` ronnie sahlberg
2013-01-02 18:55 ` Benoît Canet
2013-01-02 19:18 ` Troy Benjegerdes
2013-01-03 2:16 ` ronnie sahlberg
2013-01-03 12:39 ` Stefan Hajnoczi
2013-01-03 19:51 ` Troy Benjegerdes
2013-01-04 7:09 ` Dietmar Maurer
2013-01-04 9:49 ` Stefan Hajnoczi
2013-01-03 17:18 ` Benoît Canet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357143393-29832-15-git-send-email-benoit@irqsave.net \
--to=benoit@irqsave.net \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).