From: "Benoît Canet" <benoit@irqsave.net>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, pbonzini@redhat.com,
"Benoît Canet" <benoit@irqsave.net>,
stefanha@redhat.com
Subject: [Qemu-devel] [RFC V5 12/62] qcow2: make the deduplication forget a cluster hash when a cluster is to dedupe
Date: Wed, 16 Jan 2013 16:47:51 +0100 [thread overview]
Message-ID: <1358351321-4891-13-git-send-email-benoit@irqsave.net> (raw)
In-Reply-To: <1358351321-4891-1-git-send-email-benoit@irqsave.net>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
---
block/qcow2-cluster.c | 11 +++++++++--
block/qcow2-dedup.c | 8 +++++++-
block/qcow2.h | 2 ++
3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index ef91216..5b1d20d 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -710,6 +710,7 @@ int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
for (i = 0; i < m->nb_clusters; i++) {
uint64_t flags = 0;
+ uint64_t offset = cluster_offset + (i << s->cluster_bits);
/* if two concurrent writes happen to the same unallocated cluster
* each write allocates separate cluster and writes data concurrently.
* The first one to complete updates l2 table with pointer to its
@@ -722,8 +723,14 @@ int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
flags = m->oflag_copied ? QCOW_OFLAG_COPIED : 0;
flags |= m->to_deduplicate ? QCOW_OFLAG_TO_DEDUP : 0;
- l2_table[l2_index + i] = cpu_to_be64((cluster_offset +
- (i << s->cluster_bits)) | flags);
+ l2_table[l2_index + i] = cpu_to_be64(offset | flags);
+
+ /* make the deduplication forget the cluster to avoid making
+ * the dedup pointing to a cluster that has changed on it's back.
+ */
+ if (m->to_deduplicate) {
+ qcow2_dedup_forget_cluster_by_sector(bs, offset >> 9);
+ }
}
diff --git a/block/qcow2-dedup.c b/block/qcow2-dedup.c
index 3d512e5..7049bd8 100644
--- a/block/qcow2-dedup.c
+++ b/block/qcow2-dedup.c
@@ -824,7 +824,7 @@ static void qcow2_remove_hash_node(BlockDriverState *bs,
* @physical_sect: The physical sector of the cluster corresponding to the hash
*/
static void qcow2_remove_hash_node_by_sector(BlockDriverState *bs,
- uint64_t physical_sect)
+ uint64_t physical_sect)
{
BDRVQcowState *s = bs->opaque;
QCowHashNode *hash_node;
@@ -838,6 +838,12 @@ static void qcow2_remove_hash_node_by_sector(BlockDriverState *bs,
qcow2_remove_hash_node(bs, hash_node);
}
+void qcow2_dedup_forget_cluster_by_sector(BlockDriverState *bs,
+ uint64_t physical_sect)
+{
+ qcow2_remove_hash_node_by_sector(bs, physical_sect);
+}
+
/* This function store a hash information to disk and RAM
*
* @hash: the QCowHash to process
diff --git a/block/qcow2.h b/block/qcow2.h
index da7e57e..bc1ba33 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -469,6 +469,8 @@ int qcow2_cache_put(BlockDriverState *bs, Qcow2Cache *c, void **table);
/* qcow2-dedup.c functions */
bool qcow2_must_deduplicate(BlockDriverState *bs);
+void qcow2_dedup_forget_cluster_by_sector(BlockDriverState *bs,
+ uint64_t physical_sect);
int qcow2_dedup_read_missing_and_concatenate(BlockDriverState *bs,
QEMUIOVector *qiov,
uint64_t sector,
--
1.7.10.4
next prev parent reply other threads:[~2013-01-16 15:49 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-16 15:47 [Qemu-devel] [RFC V5 00/62] QCOW2 deduplication Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 01/62] qcow2: Add deduplication to the qcow2 specification Benoît Canet
2013-01-16 16:43 ` Eric Blake
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 02/62] qcow2: Add deduplication structures and fields Benoît Canet
2013-01-16 16:30 ` Eric Blake
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 03/62] qcow2: Add qcow2_dedup_read_missing_and_concatenate Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 04/62] qcow2: Make update_refcount public Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 05/62] qcow2: Create a way to link to l2 tables when deduplicating Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 06/62] qcow2: Add qcow2_dedup and related functions Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 07/62] qcow2: Add qcow2_dedup_store_new_hashes Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 08/62] qcow2: Implement qcow2_compute_cluster_hash Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 09/62] qcow2: Extract qcow2_dedup_grow_table Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 10/62] qcow2: Add qcow2_dedup_grow_table and use it Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 11/62] qcow2: Makes qcow2_alloc_cluster_link_l2 mark to deduplicate clusters Benoît Canet
2013-01-16 15:47 ` Benoît Canet [this message]
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 13/62] qcow2: Create qcow2_is_cluster_to_dedup Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 14/62] qcow2: Load and save deduplication table header extension Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 15/62] qcow2: Extract qcow2_do_table_init Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 16/62] qcow2-cache: Allow to choose table size at creation Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 17/62] qcow2: Extract qcow2_add_feature and qcow2_remove_feature Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 18/62] block: Add qemu-img dedup create option Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 19/62] qcow2: Add a deduplication boolean to update_refcount Benoît Canet
2013-01-16 15:47 ` [Qemu-devel] [RFC V5 20/62] qcow2: Drop hash for a given cluster when dedup makes refcount > 2^16/2 Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 21/62] qcow2: Remove hash when cluster is deleted Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 22/62] qcow2: Add qcow2_dedup_is_running to probe if dedup is running Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 23/62] qcow2: Integrate deduplication in qcow2_co_writev loop Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 24/62] qcow2: Serialize write requests when deduplication is activated Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 25/62] qcow2: Add verification of dedup table Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 26/62] qcow2: Adapt checking of QCOW_OFLAG_COPIED for dedup Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 27/62] qcow2: Add check_dedup_l2 in order to check l2 of dedup table Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 28/62] qcow2: Do not overwrite existing entries with QCOW_OFLAG_COPIED Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 29/62] qcow2: Integrate SKEIN hash algorithm in deduplication Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 30/62] qcow2: Add lazy refcounts to deduplication to prevent qcow2_cache_set_dependency loops Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 31/62] qcow2: Use large L2 table for deduplication Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 32/62] qcow: Set large dedup hash block size Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 33/62] qemu-iotests: Filter dedup=on/off so existing tests don't break Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 34/62] qcow2: Add qcow2_dedup_init and qcow2_dedup_close Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 35/62] qcow2: Add qcow2_co_dedup_resume to restart deduplication Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 36/62] qcow2: Enable the deduplication feature Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 37/62] qcow2: Add deduplication metrics structures Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 38/62] qcow2: Initialize deduplication metrics Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 39/62] qcow2: Collect unaligned writes missing data reads metric Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 40/62] qcow2: Collect deduplicated cluster metric Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 41/62] qcow2: Collect undeduplicated " Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 42/62] qcow2: Count QCowHashNode creation metrics Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 43/62] qcow2: Count QCowHashNode removal from tree for metrics Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 44/62] qcow2: Count cluster deleted metric Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 45/62] qcow2: Count deduplication refcount overflow metric Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 46/62] qapi: Add support for deduplication infos in qapi-schema.json Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 47/62] block: Add deduplication metrics to BlockDriverInfo Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 48/62] qcow2: Add qcow2_dedup_update_metrics to compute dedup RAM usage Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 49/62] qcow2: returns deduplication metrics and status via bdrv_get_info() Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 50/62] qapi: Return virtual block device deduplication metrics in QMP Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 51/62] block: Add BlockDriver function prototype to pause and resume deduplication Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 52/62] qcow2: Add code to deduplicate cluster flagged with QCOW_OFLAG_TO_DEDUP Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 53/62] block: Add bdrv_has_dedup Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 54/62] block: Add bdrv_is_dedup_running Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 55/62] block: Add bdrv_resume_dedup Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 56/62] block: Add bdrv_pause_dedup Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 57/62] qcow2: Add qcow2_pause_dedup Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 58/62] qcow2: Add qcow2_resume_dedup Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 59/62] qcow2: Make dedup status persists Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 60/62] qerror: Add QERR_DEVICE_NOT_DEDUPLICATED Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 61/62] qmp: Add block-pause-dedup Benoît Canet
2013-01-16 15:48 ` [Qemu-devel] [RFC V5 62/62] qmp: Add block_resume_dedup Benoît Canet
2013-01-16 16:03 ` [Qemu-devel] [RFC V5 00/62] QCOW2 deduplication Eric Blake
2013-01-16 16:26 ` Benoît Canet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358351321-4891-13-git-send-email-benoit@irqsave.net \
--to=benoit@irqsave.net \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).