From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, stefanha@redhat.com, quintela@redhat.com
Subject: [Qemu-devel] [PATCH v4 3/3] ahci: Add migration support
Date: Thu, 17 Jan 2013 11:01:55 +0100 [thread overview]
Message-ID: <1358416915-4103-4-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1358416915-4103-1-git-send-email-kwolf@redhat.com>
From: Jason Baron <jbaron@redhat.com>
Jason tested these patches by migrating Windows 7 and Fedora 17 guests
(while under I/O) on both piix with ahci attached and on q35 (which has
a built-in AHCI controller).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
Changes from v3:
- Update the types of some fields (VMSTATE_INT32 -> VMSTATE_BOOL)
- post_load: Check that BUSY_STAT and DRQ_STAT aren't set before
clearing busy_port
- Change vmstate_ich9_ahci.name from ahci to ich9_ahci
Changes from v2:
-migrate all relevant ahci fields
-flush any pending i/o in 'post_load'
Changes from v1:
-extend Andreas Färber's patch
---
hw/ide/ahci.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
hw/ide/ahci.h | 10 +++++++
hw/ide/ich.c | 13 ++++++---
3 files changed, 99 insertions(+), 5 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index f91cff2..a645e22 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -1199,6 +1199,82 @@ void ahci_reset(AHCIState *s)
}
}
+static const VMStateDescription vmstate_ahci_device = {
+ .name = "ahci port",
+ .version_id = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_IDE_BUS(port, AHCIDevice),
+ VMSTATE_UINT32(port_state, AHCIDevice),
+ VMSTATE_UINT32(finished, AHCIDevice),
+ VMSTATE_UINT32(port_regs.lst_addr, AHCIDevice),
+ VMSTATE_UINT32(port_regs.lst_addr_hi, AHCIDevice),
+ VMSTATE_UINT32(port_regs.fis_addr, AHCIDevice),
+ VMSTATE_UINT32(port_regs.fis_addr_hi, AHCIDevice),
+ VMSTATE_UINT32(port_regs.irq_stat, AHCIDevice),
+ VMSTATE_UINT32(port_regs.irq_mask, AHCIDevice),
+ VMSTATE_UINT32(port_regs.cmd, AHCIDevice),
+ VMSTATE_UINT32(port_regs.tfdata, AHCIDevice),
+ VMSTATE_UINT32(port_regs.sig, AHCIDevice),
+ VMSTATE_UINT32(port_regs.scr_stat, AHCIDevice),
+ VMSTATE_UINT32(port_regs.scr_ctl, AHCIDevice),
+ VMSTATE_UINT32(port_regs.scr_err, AHCIDevice),
+ VMSTATE_UINT32(port_regs.scr_act, AHCIDevice),
+ VMSTATE_UINT32(port_regs.cmd_issue, AHCIDevice),
+ VMSTATE_BOOL(done_atapi_packet, AHCIDevice),
+ VMSTATE_INT32(busy_slot, AHCIDevice),
+ VMSTATE_BOOL(init_d2h_sent, AHCIDevice),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+static int ahci_state_post_load(void *opaque, int version_id)
+{
+ int i;
+ struct AHCIDevice *ad;
+ AHCIState *s = opaque;
+
+ for (i = 0; i < s->ports; i++) {
+ ad = &s->dev[i];
+ AHCIPortRegs *pr = &ad->port_regs;
+
+ map_page(&ad->lst,
+ ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
+ map_page(&ad->res_fis,
+ ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
+ /*
+ * All pending i/o should be flushed out on a migrate. However,
+ * we might not have cleared the busy_slot since this is done
+ * in a bh. Also, issue i/o against any slots that are pending.
+ */
+ if ((ad->busy_slot != -1) &&
+ !(ad->port.ifs[0].status & (BUSY_STAT|DRQ_STAT))) {
+ pr->cmd_issue &= ~(1 << ad->busy_slot);
+ ad->busy_slot = -1;
+ }
+ check_cmd(s, i);
+ }
+
+ return 0;
+}
+
+const VMStateDescription vmstate_ahci = {
+ .name = "ahci",
+ .version_id = 1,
+ .post_load = ahci_state_post_load,
+ .fields = (VMStateField []) {
+ VMSTATE_STRUCT_VARRAY_POINTER_INT32(dev, AHCIState, ports,
+ vmstate_ahci_device, AHCIDevice),
+ VMSTATE_UINT32(control_regs.cap, AHCIState),
+ VMSTATE_UINT32(control_regs.ghc, AHCIState),
+ VMSTATE_UINT32(control_regs.irqstatus, AHCIState),
+ VMSTATE_UINT32(control_regs.impl, AHCIState),
+ VMSTATE_UINT32(control_regs.version, AHCIState),
+ VMSTATE_UINT32(idp_index, AHCIState),
+ VMSTATE_INT32(ports, AHCIState),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
typedef struct SysbusAHCIState {
SysBusDevice busdev;
AHCIState ahci;
@@ -1207,7 +1283,10 @@ typedef struct SysbusAHCIState {
static const VMStateDescription vmstate_sysbus_ahci = {
.name = "sysbus-ahci",
- .unmigratable = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_AHCI(ahci, AHCIPCIState),
+ VMSTATE_END_OF_LIST()
+ },
};
static void sysbus_ahci_reset(DeviceState *dev)
diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h
index 70d3b57..85f37fe 100644
--- a/hw/ide/ahci.h
+++ b/hw/ide/ahci.h
@@ -305,6 +305,16 @@ typedef struct AHCIPCIState {
AHCIState ahci;
} AHCIPCIState;
+extern const VMStateDescription vmstate_ahci;
+
+#define VMSTATE_AHCI(_field, _state) { \
+ .name = (stringify(_field)), \
+ .size = sizeof(AHCIState), \
+ .vmsd = &vmstate_ahci, \
+ .flags = VMS_STRUCT, \
+ .offset = vmstate_offset_value(_state, _field, AHCIState), \
+}
+
typedef struct NCQFrame {
uint8_t fis_type;
uint8_t c;
diff --git a/hw/ide/ich.c b/hw/ide/ich.c
index 1fb803d..0897bb7 100644
--- a/hw/ide/ich.c
+++ b/hw/ide/ich.c
@@ -79,9 +79,14 @@
#define ICH9_IDP_INDEX 0x10
#define ICH9_IDP_INDEX_LOG2 0x04
-static const VMStateDescription vmstate_ahci = {
- .name = "ahci",
- .unmigratable = 1,
+static const VMStateDescription vmstate_ich9_ahci = {
+ .name = "ich9_ahci",
+ .version_id = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_PCI_DEVICE(card, AHCIPCIState),
+ VMSTATE_AHCI(ahci, AHCIPCIState),
+ VMSTATE_END_OF_LIST()
+ },
};
static void pci_ich9_reset(DeviceState *dev)
@@ -152,7 +157,7 @@ static void ich_ahci_class_init(ObjectClass *klass, void *data)
k->device_id = PCI_DEVICE_ID_INTEL_82801IR;
k->revision = 0x02;
k->class_id = PCI_CLASS_STORAGE_SATA;
- dc->vmsd = &vmstate_ahci;
+ dc->vmsd = &vmstate_ich9_ahci;
dc->reset = pci_ich9_reset;
}
--
1.7.6.5
next prev parent reply other threads:[~2013-01-17 10:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-17 10:01 [Qemu-devel] [PATCH v4 0/3] AHCI migration Kevin Wolf
2013-01-17 10:01 ` [Qemu-devel] [PATCH v4 1/3] ahci: Remove unused AHCIDevice fields Kevin Wolf
2013-01-17 10:01 ` [Qemu-devel] [PATCH v4 2/3] ahci: Change data types in preparation for migration Kevin Wolf
2013-01-18 11:24 ` Juan Quintela
2013-01-17 10:01 ` Kevin Wolf [this message]
2013-01-18 11:31 ` [Qemu-devel] [PATCH v4 3/3] ahci: Add migration support Juan Quintela
2013-01-18 10:28 ` [Qemu-devel] [PATCH v4 0/3] AHCI migration Stefan Hajnoczi
2013-01-18 11:22 ` Juan Quintela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358416915-4103-4-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).