From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: dwmw2@infradead.org, aliguori@us.ibm.com, lersek@redhat.com,
afaerber@suse.de
Subject: [Qemu-devel] [PATCH v2 1/3] cpu: make CPU_INTERRUPT_RESET available on all targets
Date: Tue, 5 Mar 2013 20:00:54 +0100 [thread overview]
Message-ID: <1362510056-3316-2-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1362510056-3316-1-git-send-email-pbonzini@redhat.com>
On the x86, some devices need access to the CPU reset pin (INIT#).
Provide a generic service to do this, using one of the internal
cpu_interrupt targets. Generalize the PPC-specific code for
CPU_INTERRUPT_RESET to other targets, and provide a function that
will raise the interrupt on all CPUs.
Since PPC does not support migration, I picked the value that is
used on x86, CPU_INTERRUPT_TGT_INT_1. No other arch used to use
CPU_INTERRUPT_TGT_INT_1.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
cpu-exec.c | 24 ++++++++++++++----------
cpus.c | 9 +++++++++
include/exec/cpu-all.h | 8 +++++---
include/sysemu/cpus.h | 1 +
target-i386/cpu.h | 7 ++++---
target-ppc/cpu.h | 3 ---
6 files changed, 33 insertions(+), 19 deletions(-)
diff --git a/cpu-exec.c b/cpu-exec.c
index 94fedc5..f400676 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -304,19 +304,26 @@ int cpu_exec(CPUArchState *env)
}
#endif
#if defined(TARGET_I386)
-#if !defined(CONFIG_USER_ONLY)
- if (interrupt_request & CPU_INTERRUPT_POLL) {
- cpu->interrupt_request &= ~CPU_INTERRUPT_POLL;
- apic_poll_irq(env->apic_state);
- }
-#endif
if (interrupt_request & CPU_INTERRUPT_INIT) {
cpu_svm_check_intercept_param(env, SVM_EXIT_INIT,
0);
do_cpu_init(x86_env_get_cpu(env));
env->exception_index = EXCP_HALTED;
cpu_loop_exit(env);
- } else if (interrupt_request & CPU_INTERRUPT_SIPI) {
+ }
+#else
+ if ((interrupt_request & CPU_INTERRUPT_RESET)) {
+ cpu_reset(cpu);
+ }
+#endif
+#if defined(TARGET_I386)
+#if !defined(CONFIG_USER_ONLY)
+ if (interrupt_request & CPU_INTERRUPT_POLL) {
+ cpu->interrupt_request &= ~CPU_INTERRUPT_POLL;
+ apic_poll_irq(env->apic_state);
+ }
+#endif
+ if (interrupt_request & CPU_INTERRUPT_SIPI) {
do_cpu_sipi(x86_env_get_cpu(env));
} else if (env->hflags2 & HF2_GIF_MASK) {
if ((interrupt_request & CPU_INTERRUPT_SMI) &&
@@ -370,9 +377,6 @@ int cpu_exec(CPUArchState *env)
}
}
#elif defined(TARGET_PPC)
- if ((interrupt_request & CPU_INTERRUPT_RESET)) {
- cpu_reset(cpu);
- }
if (interrupt_request & CPU_INTERRUPT_HARD) {
ppc_hw_interrupt(env);
if (env->pending_interrupts == 0) {
diff --git a/cpus.c b/cpus.c
index e919dd7..87d471a 100644
--- a/cpus.c
+++ b/cpus.c
@@ -405,6 +405,15 @@ void hw_error(const char *fmt, ...)
abort();
}
+void cpu_reset_all_async(void)
+{
+ CPUArchState *env;
+
+ for (env = first_cpu; env; env = env->next_cpu) {
+ cpu_interrupt(ENV_GET_CPU(env), CPU_INTERRUPT_RESET);
+ }
+}
+
void cpu_synchronize_all_states(void)
{
CPUArchState *cpu;
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index e9c3717..62d2654 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -392,6 +392,9 @@ DECLARE_TLS(CPUArchState *,cpu_single_env);
/* Debug event pending. */
#define CPU_INTERRUPT_DEBUG 0x0080
+/* Reset signal. */
+#define CPU_INTERRUPT_RESET 0x0400
+
/* Several target-specific external hardware interrupts. Each target/cpu.h
should define proper names based on these defines. */
#define CPU_INTERRUPT_TGT_EXT_0 0x0008
@@ -406,9 +409,8 @@ DECLARE_TLS(CPUArchState *,cpu_single_env);
instruction being executed. These, therefore, are not masked while
single-stepping within the debugger. */
#define CPU_INTERRUPT_TGT_INT_0 0x0100
-#define CPU_INTERRUPT_TGT_INT_1 0x0400
-#define CPU_INTERRUPT_TGT_INT_2 0x0800
-#define CPU_INTERRUPT_TGT_INT_3 0x2000
+#define CPU_INTERRUPT_TGT_INT_1 0x0800
+#define CPU_INTERRUPT_TGT_INT_2 0x2000
/* First unused bit: 0x4000. */
diff --git a/include/sysemu/cpus.h b/include/sysemu/cpus.h
index 6502488..87b9829 100644
--- a/include/sysemu/cpus.h
+++ b/include/sysemu/cpus.h
@@ -7,6 +7,7 @@ void resume_all_vcpus(void);
void pause_all_vcpus(void);
void cpu_stop_current(void);
+void cpu_reset_all_async(void);
void cpu_synchronize_all_states(void);
void cpu_synchronize_all_post_reset(void);
void cpu_synchronize_all_post_init(void);
diff --git a/target-i386/cpu.h b/target-i386/cpu.h
index 48f41ca..c7b8176 100644
--- a/target-i386/cpu.h
+++ b/target-i386/cpu.h
@@ -577,10 +577,11 @@ typedef uint32_t FeatureWordArray[FEATURE_WORDS];
#define CPU_INTERRUPT_NMI CPU_INTERRUPT_TGT_EXT_3
#define CPU_INTERRUPT_MCE CPU_INTERRUPT_TGT_EXT_4
#define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_INT_0
-#define CPU_INTERRUPT_INIT CPU_INTERRUPT_TGT_INT_1
-#define CPU_INTERRUPT_SIPI CPU_INTERRUPT_TGT_INT_2
-#define CPU_INTERRUPT_TPR CPU_INTERRUPT_TGT_INT_3
+#define CPU_INTERRUPT_SIPI CPU_INTERRUPT_TGT_INT_1
+#define CPU_INTERRUPT_TPR CPU_INTERRUPT_TGT_INT_2
+/* CPU_INTERRUPT_RESET acts as the INIT# pin. */
+#define CPU_INTERRUPT_INIT CPU_INTERRUPT_RESET
typedef enum {
CC_OP_DYNAMIC, /* must use dynamic code to get cc_op */
diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h
index 4604a28..ceb0a12 100644
--- a/target-ppc/cpu.h
+++ b/target-ppc/cpu.h
@@ -2084,9 +2084,6 @@ enum {
PPC_INTERRUPT_PERFM, /* Performance monitor interrupt */
};
-/* CPU should be reset next, restart from scratch afterwards */
-#define CPU_INTERRUPT_RESET CPU_INTERRUPT_TGT_INT_0
-
/*****************************************************************************/
static inline target_ulong cpu_read_xer(CPUPPCState *env)
--
1.8.1.2
next prev parent reply other threads:[~2013-03-05 19:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-05 19:00 [Qemu-devel] [PATCH v2 0/3] Implement x86 soft reset Paolo Bonzini
2013-03-05 19:00 ` Paolo Bonzini [this message]
2013-03-05 23:23 ` [Qemu-devel] [PATCH v2 1/3] cpu: make CPU_INTERRUPT_RESET available on all targets Peter Maydell
2013-03-06 8:49 ` Paolo Bonzini
2013-03-06 2:02 ` Peter Crosthwaite
2013-03-06 9:13 ` Paolo Bonzini
2013-03-06 11:54 ` Andreas Färber
2013-03-06 12:12 ` Peter Maydell
2013-03-06 12:19 ` Paolo Bonzini
2013-03-05 19:00 ` [Qemu-devel] [PATCH v2 2/3] pc: port 92 reset requires a low->high transition Paolo Bonzini
2013-03-05 19:00 ` [Qemu-devel] [PATCH v2 3/3] hw: correctly implement soft reset Paolo Bonzini
2013-03-06 2:02 ` li guang
2013-03-06 8:36 ` Paolo Bonzini
2013-03-06 9:06 ` li guang
2013-03-06 9:23 ` Paolo Bonzini
2013-03-05 19:35 ` [Qemu-devel] [PATCH v2 0/3] Implement x86 " Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362510056-3316-2-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=afaerber@suse.de \
--cc=aliguori@us.ibm.com \
--cc=dwmw2@infradead.org \
--cc=lersek@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).