[Qemu-devel] [PATCH v8 13/24] hw/arm: add FTI2C010 I2C controller support

[Kuo-Jung Su <dantesu@gmail.com>]

From: Kuo-Jung Su <dantesu@faraday-tech.com>

The FTI2C010 is a simple I2C master controller.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
---
 hw/arm/Makefile.objs      |    1 +
 hw/arm/faraday_a369_soc.c |    6 ++
 hw/arm/fti2c010.c         |  212 +++++++++++++++++++++++++++++++++++++++++++++
 hw/arm/fti2c010.h         |   71 +++++++++++++++
 4 files changed, 290 insertions(+)
 create mode 100644 hw/arm/fti2c010.c
 create mode 100644 hw/arm/fti2c010.h

diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 2622f3f..63ba519 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -46,3 +46,4 @@ obj-y += ftrtc011.o
 obj-y += ftdmac020.o
 obj-y += ftapbbrg020.o
 obj-y += ftnandc021.o
+obj-y += fti2c010.o
diff --git a/hw/arm/faraday_a369_soc.c b/hw/arm/faraday_a369_soc.c
index 0088915..89610d9 100644
--- a/hw/arm/faraday_a369_soc.c
+++ b/hw/arm/faraday_a369_soc.c
@@ -241,6 +241,12 @@ a369soc_device_init(FaradaySoCState *s)
     req = qdev_get_gpio_in(s->hdma[0], 15);
     qdev_connect_gpio_out(s->hdma[0], 15, ack);
     qdev_connect_gpio_out(ds, 0, req);
+
+    /* fti2c010 */
+    ds = sysbus_create_simple("fti2c010", 0x92900000, s->pic[51]);
+    s->i2c[0] = ds;
+    ds = sysbus_create_simple("fti2c010", 0x92A00000, s->pic[52]);
+    s->i2c[1] = ds;
 }
 
 static void a369soc_realize(DeviceState *dev, Error **errp)
diff --git a/hw/arm/fti2c010.c b/hw/arm/fti2c010.c
new file mode 100644
index 0000000..95f6a9d
--- /dev/null
+++ b/hw/arm/fti2c010.c
@@ -0,0 +1,212 @@
+/*
+ * QEMU model of the FTI2C010 Controller
+ *
+ * Copyright (C) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is licensed under GNU GPL v2+.
+ */
+
+#include "hw/sysbus.h"
+#include "hw/i2c.h"
+#include "sysemu/sysemu.h"
+
+#include "fti2c010.h"
+
+#define I2C_RD  1
+#define I2C_WR  0
+
+#define TYPE_FTI2C010   "fti2c010"
+
+typedef struct Fti2c010State {
+    SysBusDevice busdev;
+    MemoryRegion mmio;
+
+    qemu_irq irq;
+    i2c_bus *bus;
+
+    uint8_t  recv;    /* I2C RD = 1; I2C WR = 0 */
+    uint8_t  addr;    /* 7-bits device address */
+
+    /* HW register cache */
+    uint32_t cr;
+    uint32_t sr;
+    uint32_t cdr;
+    uint32_t dr;
+    uint32_t tgsr;
+} Fti2c010State;
+
+#define FTI2C010(obj) \
+    OBJECT_CHECK(Fti2c010State, obj, TYPE_FTI2C010)
+
+static void
+fti2c010_update_irq(Fti2c010State *s)
+{
+    uint32_t sr = extract32(s->sr, 4, 8);
+    uint32_t cr = extract32(s->cr, 8, 8);
+    qemu_set_irq(s->irq, (sr & cr) ? 1 : 0);
+}
+
+static uint64_t
+fti2c010_mem_read(void *opaque, hwaddr addr, unsigned size)
+{
+    Fti2c010State *s = FTI2C010(opaque);
+    uint32_t ret = 0;
+
+    switch (addr) {
+    case REG_CR:
+        return s->cr;
+    case REG_SR:
+        ret = s->sr | (i2c_bus_busy(s->bus) ? SR_BB : 0);
+        s->sr &= 0xfffff00f;    /* clear RC status bits */
+        fti2c010_update_irq(s);
+        break;
+    case REG_CDR:
+        return s->cdr;
+    case REG_DR:
+        return s->dr;
+    case REG_TGSR:
+        return s->tgsr;
+    case REG_BMR:
+        return 0x00000003;  /* Slave mode: SCL=1, SDA=1 */
+    case REG_REVR:
+        return 0x00011000;  /* REV. 1.10.0 */
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+            "fti2c010: undefined memory access@%#" HWADDR_PRIx "\n", addr);
+        break;
+    }
+
+    return ret;
+}
+
+static void
+fti2c010_mem_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+{
+    Fti2c010State *s = FTI2C010(opaque);
+
+    switch (addr) {
+    case REG_CR:
+        s->cr = (uint32_t)val;
+        if (s->cr & CR_I2CRST) {
+            s->dr = 0;
+            s->sr = 0;
+        } else if ((s->cr & CR_MASTER_EN) && (s->cr & CR_TBEN)) {
+            s->sr &= ~SR_ACK;
+            if (s->cr & CR_START) {
+                s->recv = (s->dr & I2C_RD) ? 1 : 0;
+                s->addr = extract32(s->dr, 1, 7);
+                if (!i2c_start_transfer(s->bus, s->addr, s->recv)) {
+                    s->sr |= SR_DT | SR_ACK;
+                } else {
+                    s->sr &= ~SR_DT;
+                }
+            } else {
+                if (s->recv) {
+                    s->dr = i2c_recv(s->bus);
+                    s->sr |= SR_DR;
+                } else {
+                    i2c_send(s->bus, (uint8_t)s->dr);
+                    s->sr |= SR_DT;
+                }
+                if (s->cr & CR_NACK) {
+                    i2c_nack(s->bus);
+                }
+                s->sr |= SR_ACK;
+                if (s->cr & CR_STOP) {
+                    i2c_end_transfer(s->bus);
+                }
+            }
+        }
+        s->cr &= ~(CR_TBEN | CR_I2CRST);
+        fti2c010_update_irq(s);
+        break;
+    case REG_CDR:
+        s->cdr = (uint32_t)val & 0x3ffff;
+        break;
+    case REG_DR:
+        s->dr  = (uint32_t)val & 0xff;
+        break;
+    case REG_TGSR:
+        s->tgsr = (uint32_t)val & 0x1fff;
+        break;
+        /* slave mode is useless to QEMU, ignore it. */
+    case REG_SAR:
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+            "fti2c010: undefined memory access@%#" HWADDR_PRIx "\n", addr);
+        break;
+    }
+}
+
+static const MemoryRegionOps mmio_ops = {
+    .read  = fti2c010_mem_read,
+    .write = fti2c010_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static void fti2c010_reset(DeviceState *ds)
+{
+    Fti2c010State *s = FTI2C010(SYS_BUS_DEVICE(ds));
+
+    s->cr   = 0;
+    s->sr   = 0;
+    s->cdr  = 0;
+    s->tgsr = TGSR_TSR(1) | TGSR_GSR(1);
+
+    qemu_set_irq(s->irq, 0);
+}
+
+static void fti2c010_realize(DeviceState *dev, Error **errp)
+{
+    Fti2c010State *s = FTI2C010(dev);
+
+    s->bus = i2c_init_bus(&s->busdev.qdev, "i2c");
+
+    memory_region_init_io(&s->mmio, &mmio_ops, s, TYPE_FTI2C010, 0x1000);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+}
+
+static const VMStateDescription vmstate_fti2c010 = {
+    .name = TYPE_FTI2C010,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(cr, Fti2c010State),
+        VMSTATE_UINT32(sr, Fti2c010State),
+        VMSTATE_UINT32(cdr, Fti2c010State),
+        VMSTATE_UINT32(dr, Fti2c010State),
+        VMSTATE_UINT32(tgsr, Fti2c010State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void fti2c010_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->vmsd    = &vmstate_fti2c010;
+    dc->reset   = fti2c010_reset;
+    dc->realize = fti2c010_realize;
+    dc->no_user = 1;
+}
+
+static const TypeInfo fti2c010_info = {
+    .name           = TYPE_FTI2C010,
+    .parent         = TYPE_SYS_BUS_DEVICE,
+    .instance_size  = sizeof(Fti2c010State),
+    .class_init     = fti2c010_class_init,
+};
+
+static void fti2c010_register_types(void)
+{
+    type_register_static(&fti2c010_info);
+}
+
+type_init(fti2c010_register_types)
diff --git a/hw/arm/fti2c010.h b/hw/arm/fti2c010.h
new file mode 100644
index 0000000..2c4419b
--- /dev/null
+++ b/hw/arm/fti2c010.h
@@ -0,0 +1,71 @@
+/*
+ * QEMU model of the FTI2C010 Controller
+ *
+ * Copyright (C) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is licensed under GNU GPL v2+.
+ */
+
+#ifndef HW_ARM_FTI2C010_H
+#define HW_ARM_FTI2C010_H
+
+#include "qemu/bitops.h"
+
+/*
+ * FTI2C010 registers
+ */
+#define REG_CR              0x00    /* control register */
+#define REG_SR              0x04    /* status register */
+#define REG_CDR             0x08    /* clock division register */
+#define REG_DR              0x0C    /* data register */
+#define REG_SAR             0x10    /* slave address register */
+#define REG_TGSR            0x14    /* time & glitch suppression register */
+#define REG_BMR             0x18    /* bus monitor register */
+#define REG_REVR            0x30    /* revision register */
+
+/*
+ * REG_CR
+ */
+#define CR_STARTIEN         0x4000  /* start condition */
+#define CR_ALIEN            0x2000  /* Arbitration lose */
+#define CR_SAMIEN           0x1000  /* slave address match */
+#define CR_STOPIEN          0x800   /* stop condition */
+#define CR_BERRIEN          0x400   /* non ACK response */
+#define CR_DRIEN            0x200   /* data receive */
+#define CR_DTIEN            0x100   /* data transmit */
+#define CR_TBEN             0x80    /* transfer byte enable */
+#define CR_NACK             0x40
+#define CR_STOP             0x20    /* stop */
+#define CR_START            0x10    /* start */
+#define CR_GCEN             0x8     /* general call */
+#define CR_SCLEN            0x4     /* enable clock */
+#define CR_I2CEN            0x2     /* enable I2C */
+#define CR_I2CRST           0x1     /* reset I2C */
+#define CR_MASTER_INTR      (CR_ALIEN | CR_BERRIEN | CR_DRIEN | CR_DTIEN)
+#define CR_MASTER_EN        (CR_SCLEN | CR_I2CEN)
+#define CR_MASTER_MODE      (CR_MASTER_INTR | CR_MASTER_EN)
+
+/*
+ * REG_SR
+ */
+#define SR_START            0x800
+#define SR_AL               0x400
+#define SR_GC               0x200
+#define SR_SAM              0x100
+#define SR_STOP             0x80
+#define SR_BERR             0x40
+#define SR_DR               0x20    /* received one new data byte */
+#define SR_DT               0x10    /* trandmitted one data byte */
+#define SR_BB               0x8     /* set when i2c bus is busy */
+#define SR_I2CB             0x4     /* set when fti2c010 is busy */
+#define SR_ACK              0x2
+#define SR_RW               0x1
+
+/*
+ * REG_TGSR
+ */
+#define TGSR_TSR(x)         ((x) & 0x3f)            /* setup/hold time */
+#define TGSR_GSR(x)         (((x) & 0x07) << 10)    /* glitch suppression */
+
+#endif
-- 
1.7.9.5