qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, stefanha@redhat.com
Subject: [Qemu-devel] [PATCH 08/19] qcow2: handle_alloc(): Get rid of nb_clusters parameter
Date: Mon, 25 Mar 2013 18:30:09 +0100	[thread overview]
Message-ID: <1364232620-5293-9-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1364232620-5293-1-git-send-email-kwolf@redhat.com>

We already communicate the same information in *bytes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/qcow2-cluster.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 454a30c..009f62a 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -876,17 +876,18 @@ static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset,
  *
  *  -errno: in error cases
  *
- * TODO Get rid of nb_clusters, keep_clusters, n_start, n_end
+ * TODO Get rid of keep_clusters, n_start, n_end
  * TODO Make *bytes actually behave as specified above
  */
 static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
     uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m,
-    unsigned int nb_clusters, int keep_clusters, int n_start, int n_end)
+    int keep_clusters, int n_start, int n_end)
 {
     BDRVQcowState *s = bs->opaque;
     int l2_index;
     uint64_t *l2_table;
     uint64_t entry;
+    unsigned int nb_clusters;
     int ret;
 
     uint64_t alloc_offset;
@@ -897,6 +898,13 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
                              *bytes);
     assert(*bytes > 0);
 
+    /*
+     * Calculate the number of clusters to look for. We stop at L2 table
+     * boundaries to keep things simple.
+     */
+    l2_index = offset_to_l2_index(s, guest_offset);
+    nb_clusters = MIN(size_to_clusters(s, *bytes), s->l2_size - l2_index);
+
     /* Find L2 entry for the first involved cluster */
     ret = get_cluster_table(bs, guest_offset, &l2_table, &l2_index);
     if (ret < 0) {
@@ -1103,6 +1111,7 @@ again:
     }
 
     cluster_offset &= L2E_OFFSET_MASK;
+    *host_offset = cluster_offset;
 
     /*
      * The L2 table isn't used any more after this. As long as the cache works
@@ -1123,11 +1132,14 @@ again:
 
     cur_bytes = nb_clusters * s->cluster_size;
     ret = handle_alloc(bs, offset, &cluster_offset, &cur_bytes, m,
-                       nb_clusters, keep_clusters, n_start, n_end);
+                       keep_clusters, n_start, n_end);
     if (ret < 0) {
         return ret;
     }
 
+    if (!*host_offset) {
+        *host_offset = cluster_offset;
+    }
     nb_clusters = size_to_clusters(s, cur_bytes);
 
     /* Some cleanup work */
@@ -1139,7 +1151,6 @@ done:
 
     assert(sectors > n_start);
     *num = sectors - n_start;
-    *host_offset = cluster_offset;
 
     return 0;
 }
-- 
1.8.1.4

  parent reply	other threads:[~2013-03-25 17:31 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-25 17:30 [Qemu-devel] [PATCH 00/19] qcow2: Rework cluster allocation even more Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 01/19] qcow2: Fix "total clusters" number in bdrv_check Kevin Wolf
2013-03-25 18:54   ` Eric Blake
2013-03-25 17:30 ` [Qemu-devel] [PATCH 02/19] qcow2: Remove bogus unlock of s->lock Kevin Wolf
2013-03-25 19:01   ` Eric Blake
2013-03-25 17:30 ` [Qemu-devel] [PATCH 03/19] qcow2: Handle dependencies earlier Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 04/19] qcow2: Improve check for overlapping allocations Kevin Wolf
2013-03-25 19:08   ` Eric Blake
2013-03-25 17:30 ` [Qemu-devel] [PATCH 05/19] qcow2: Change handle_dependency to byte granularity Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 06/19] qcow2: Decouple cluster allocation from cluster reuse code Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 07/19] qcow2: Factor out handle_alloc() Kevin Wolf
2013-03-25 17:30 ` Kevin Wolf [this message]
2013-03-25 17:30 ` [Qemu-devel] [PATCH 09/19] qcow2: handle_alloc(): Get rid of keep_clusters parameter Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 10/19] qcow2: Finalise interface of handle_alloc() Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 11/19] qcow2: Clean up handle_alloc() Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 12/19] qcow2: Factor out handle_copied() Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 13/19] qcow2: handle_copied(): Get rid of nb_clusters parameter Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 14/19] qcow2: handle_copied(): Get rid of keep_clusters parameter Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 15/19] qcow2: handle_copied(): Implement non-zero host_offset Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 16/19] qcow2: Use byte granularity in qcow2_alloc_cluster_offset() Kevin Wolf
2013-03-25 19:50   ` Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 17/19] qcow2: Allow requests with multiple l2metas Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 18/19] qcow2: Move cluster gathering to a non-looping loop Kevin Wolf
2013-03-25 17:30 ` [Qemu-devel] [PATCH 19/19] qcow2: Gather clusters in a looping loop Kevin Wolf
2013-03-25 18:48   ` Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1364232620-5293-9-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).