From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Anthony Liguori <aliguori@us.ibm.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PATCH 20/23] qcow2: Allow requests with multiple l2metas
Date: Thu, 28 Mar 2013 17:40:34 +0100 [thread overview]
Message-ID: <1364488837-15916-21-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1364488837-15916-1-git-send-email-stefanha@redhat.com>
From: Kevin Wolf <kwolf@redhat.com>
Instead of expecting a single l2meta, have a list of them. This allows
to still have a single I/O request for the guest data, even though
multiple l2meta may be needed in order to describe both a COW overwrite
and a new cluster allocation (typical sequential write case).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/qcow2-cluster.c | 3 +++
block/qcow2.c | 14 +++++++++++---
block/qcow2.h | 3 +++
3 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 78e7db9..6dc7f7f 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1069,10 +1069,13 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
int alloc_n_start = offset_into_cluster(s, guest_offset)
>> BDRV_SECTOR_BITS;
int nb_sectors = MIN(requested_sectors, avail_sectors);
+ QCowL2Meta *old_m = *m;
*m = g_malloc0(sizeof(**m));
**m = (QCowL2Meta) {
+ .next = old_m,
+
.alloc_offset = alloc_cluster_offset,
.offset = start_of_cluster(s, guest_offset),
.nb_clusters = nb_clusters,
diff --git a/block/qcow2.c b/block/qcow2.c
index 3f7edf5..7e7d775 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -858,7 +858,9 @@ static coroutine_fn int qcow2_co_writev(BlockDriverState *bs,
goto fail;
}
- if (l2meta != NULL) {
+ while (l2meta != NULL) {
+ QCowL2Meta *next;
+
ret = qcow2_alloc_cluster_link_l2(bs, l2meta);
if (ret < 0) {
goto fail;
@@ -871,8 +873,9 @@ static coroutine_fn int qcow2_co_writev(BlockDriverState *bs,
qemu_co_queue_restart_all(&l2meta->dependent_requests);
+ next = l2meta->next;
g_free(l2meta);
- l2meta = NULL;
+ l2meta = next;
}
remaining_sectors -= cur_nr_sectors;
@@ -885,12 +888,17 @@ static coroutine_fn int qcow2_co_writev(BlockDriverState *bs,
fail:
qemu_co_mutex_unlock(&s->lock);
- if (l2meta != NULL) {
+ while (l2meta != NULL) {
+ QCowL2Meta *next;
+
if (l2meta->nb_clusters != 0) {
QLIST_REMOVE(l2meta, next_in_flight);
}
qemu_co_queue_restart_all(&l2meta->dependent_requests);
+
+ next = l2meta->next;
g_free(l2meta);
+ l2meta = next;
}
qemu_iovec_destroy(&hd_qiov);
diff --git a/block/qcow2.h b/block/qcow2.h
index 32806bd..bf8db2a 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -250,6 +250,9 @@ typedef struct QCowL2Meta
*/
Qcow2COWRegion cow_end;
+ /** Pointer to next L2Meta of the same write request */
+ struct QCowL2Meta *next;
+
QLIST_ENTRY(QCowL2Meta) next_in_flight;
} QCowL2Meta;
--
1.8.1.4
next prev parent reply other threads:[~2013-03-28 16:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-28 16:40 [Qemu-devel] [PULL 00/23] Block patches Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 01/23] vl.c: call bdrv_init_with_whitelist() before cmdline parsing Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 02/23] qemu-iotests: More concurrent allocation scenarios Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 03/23] qcow2: Fix "total clusters" number in bdrv_check Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 04/23] qcow2: Remove bogus unlock of s->lock Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 05/23] qcow2: Handle dependencies earlier Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 06/23] qcow2: Improve check for overlapping allocations Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 07/23] qcow2: Change handle_dependency to byte granularity Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 08/23] qcow2: Decouple cluster allocation from cluster reuse code Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 09/23] qcow2: Factor out handle_alloc() Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 10/23] qcow2: handle_alloc(): Get rid of nb_clusters parameter Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 11/23] qcow2: handle_alloc(): Get rid of keep_clusters parameter Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 12/23] qcow2: Finalise interface of handle_alloc() Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 13/23] qcow2: Clean up handle_alloc() Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 14/23] qcow2: Factor out handle_copied() Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 15/23] qcow2: handle_copied(): Get rid of nb_clusters parameter Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 16/23] qcow2: handle_copied(): Get rid of keep_clusters parameter Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 17/23] qcow2: handle_copied(): Implement non-zero host_offset Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 18/23] qcow2: Prepare handle_alloc/copied() for byte granularity Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 19/23] qcow2: Use byte granularity in qcow2_alloc_cluster_offset() Stefan Hajnoczi
2013-03-28 16:40 ` Stefan Hajnoczi [this message]
2013-03-28 16:40 ` [Qemu-devel] [PATCH 21/23] qcow2: Move cluster gathering to a non-looping loop Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 22/23] qcow2: Gather clusters in a looping loop Stefan Hajnoczi
2013-03-28 16:40 ` [Qemu-devel] [PATCH 23/23] block: Fix direct use of protocols as driver for bdrv_open() Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364488837-15916-21-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).