* [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci
@ 2013-03-29 1:08 Nicholas A. Bellinger
2013-03-29 1:08 ` [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon Nicholas A. Bellinger
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Nicholas A. Bellinger @ 2013-03-29 1:08 UTC (permalink / raw)
To: target-devel
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, Nicholas Bellinger,
lf-virt, Anthony Liguori, Stefan Hajnoczi, Paolo Bonzini,
Asias He
From: Nicholas Bellinger <nab@linux-iscsi.org>
Hi QEMU folks,
The following is the patch-v2 series to support vhost-scsi-pci within
the upstream QEMU tree.
This includes the refactoring of existing virtio-scsi code from Paolo
to allow a VirtIOSCSICommon structure that is shared amoungst existing
virtio-scsi-pci device and new vhost-scsi-pci device code.
Currently this code requires Asias's seabios bugfixes (commit 5a7730db5
and b44a7be17), and two other tcm_vhost patches to reset vq->last_used_idx
after seabios handoff and disable EVENT_IDX from GET_FEATURES that's
currently in flight for v3.9.0 kernel code.
There is a seperate issue with seabios virtio-scsi that's causing a failure
in vhost_verify_ring_mappings() is still being tracked down, but this series
should now be getting close to a merge minus this last outstanding item.
Changes in Patch-v2:
- Move ->get_features() assignment to virtio_scsi_init() instead of
virtio_scsi_init_common() (nab)
- Add vhost_scsi_get_features() in order to determine feature bits
supports by host kernel (mst + nab)
- Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
EVENT_IDX to be disabled by host in vhost_scsi_get_features() (mst)
- Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES (mst)
- Drop vhost_verify_ring_mappings() enable-only hack (mst)
A big thanks to Paolo, Asias, MST, and Stefan for all of their efforts
on this series.
Thank you,
Paolo Bonzini (2):
virtio-scsi: create VirtIOSCSICommon
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
configure | 15 +++-
hw/Makefile.objs | 5 +-
hw/s390x/s390-virtio-bus.c | 35 ++++++
hw/vhost-scsi.c | 264 ++++++++++++++++++++++++++++++++++++++++++++
hw/vhost-scsi.h | 64 +++++++++++
hw/virtio-pci.c | 62 ++++++++++
hw/virtio-scsi.c | 192 ++++++++------------------------
hw/virtio-scsi.h | 132 +++++++++++++++++++++-
include/qemu/osdep.h | 4 +
9 files changed, 623 insertions(+), 150 deletions(-)
create mode 100644 hw/vhost-scsi.c
create mode 100644 hw/vhost-scsi.h
--
1.7.2.5
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon
2013-03-29 1:08 [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci Nicholas A. Bellinger
@ 2013-03-29 1:08 ` Nicholas A. Bellinger
2013-04-08 21:59 ` Anthony Liguori
2013-03-29 1:08 ` [Qemu-devel] [PATCH-v2 2/2] vhost-scsi: new device supporting the tcm_vhost Linux kernel module Nicholas A. Bellinger
2013-03-29 6:39 ` [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci Asias He
2 siblings, 1 reply; 9+ messages in thread
From: Nicholas A. Bellinger @ 2013-03-29 1:08 UTC (permalink / raw)
To: target-devel
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, lf-virt,
Anthony Liguori, Stefan Hajnoczi, Paolo Bonzini, Asias He
From: Paolo Bonzini <pbonzini@redhat.com>
This patch refactors existing virtio-scsi code into VirtIOSCSICommon
in order to allow virtio_scsi_init_common() to be used by both internal
virtio_scsi_init() and external vhost-scsi-pci code.
Changes in Patch-v2:
- Move ->get_features() assignment to virtio_scsi_init() instead of
virtio_scsi_init_common()
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
hw/virtio-scsi.c | 192 +++++++++++++-------------------------------------
hw/virtio-scsi.h | 130 ++++++++++++++++++++++++++++++++--
include/qemu/osdep.h | 4 +
3 files changed, 178 insertions(+), 148 deletions(-)
diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c
index 8620712..c59e9c6 100644
--- a/hw/virtio-scsi.c
+++ b/hw/virtio-scsi.c
@@ -18,118 +18,6 @@
#include <hw/scsi.h>
#include <hw/scsi-defs.h>
-#define VIRTIO_SCSI_VQ_SIZE 128
-#define VIRTIO_SCSI_CDB_SIZE 32
-#define VIRTIO_SCSI_SENSE_SIZE 96
-#define VIRTIO_SCSI_MAX_CHANNEL 0
-#define VIRTIO_SCSI_MAX_TARGET 255
-#define VIRTIO_SCSI_MAX_LUN 16383
-
-/* Response codes */
-#define VIRTIO_SCSI_S_OK 0
-#define VIRTIO_SCSI_S_OVERRUN 1
-#define VIRTIO_SCSI_S_ABORTED 2
-#define VIRTIO_SCSI_S_BAD_TARGET 3
-#define VIRTIO_SCSI_S_RESET 4
-#define VIRTIO_SCSI_S_BUSY 5
-#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
-#define VIRTIO_SCSI_S_TARGET_FAILURE 7
-#define VIRTIO_SCSI_S_NEXUS_FAILURE 8
-#define VIRTIO_SCSI_S_FAILURE 9
-#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10
-#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11
-#define VIRTIO_SCSI_S_INCORRECT_LUN 12
-
-/* Controlq type codes. */
-#define VIRTIO_SCSI_T_TMF 0
-#define VIRTIO_SCSI_T_AN_QUERY 1
-#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2
-
-/* Valid TMF subtypes. */
-#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0
-#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1
-#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2
-#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3
-#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4
-#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5
-#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6
-#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7
-
-/* Events. */
-#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000
-#define VIRTIO_SCSI_T_NO_EVENT 0
-#define VIRTIO_SCSI_T_TRANSPORT_RESET 1
-#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
-#define VIRTIO_SCSI_T_PARAM_CHANGE 3
-
-/* Reasons for transport reset event */
-#define VIRTIO_SCSI_EVT_RESET_HARD 0
-#define VIRTIO_SCSI_EVT_RESET_RESCAN 1
-#define VIRTIO_SCSI_EVT_RESET_REMOVED 2
-
-/* SCSI command request, followed by data-out */
-typedef struct {
- uint8_t lun[8]; /* Logical Unit Number */
- uint64_t tag; /* Command identifier */
- uint8_t task_attr; /* Task attribute */
- uint8_t prio;
- uint8_t crn;
- uint8_t cdb[];
-} QEMU_PACKED VirtIOSCSICmdReq;
-
-/* Response, followed by sense data and data-in */
-typedef struct {
- uint32_t sense_len; /* Sense data length */
- uint32_t resid; /* Residual bytes in data buffer */
- uint16_t status_qualifier; /* Status qualifier */
- uint8_t status; /* Command completion status */
- uint8_t response; /* Response values */
- uint8_t sense[];
-} QEMU_PACKED VirtIOSCSICmdResp;
-
-/* Task Management Request */
-typedef struct {
- uint32_t type;
- uint32_t subtype;
- uint8_t lun[8];
- uint64_t tag;
-} QEMU_PACKED VirtIOSCSICtrlTMFReq;
-
-typedef struct {
- uint8_t response;
-} QEMU_PACKED VirtIOSCSICtrlTMFResp;
-
-/* Asynchronous notification query/subscription */
-typedef struct {
- uint32_t type;
- uint8_t lun[8];
- uint32_t event_requested;
-} QEMU_PACKED VirtIOSCSICtrlANReq;
-
-typedef struct {
- uint32_t event_actual;
- uint8_t response;
-} QEMU_PACKED VirtIOSCSICtrlANResp;
-
-typedef struct {
- uint32_t event;
- uint8_t lun[8];
- uint32_t reason;
-} QEMU_PACKED VirtIOSCSIEvent;
-
-typedef struct {
- uint32_t num_queues;
- uint32_t seg_max;
- uint32_t max_sectors;
- uint32_t cmd_per_lun;
- uint32_t event_info_size;
- uint32_t sense_size;
- uint32_t cdb_size;
- uint16_t max_channel;
- uint16_t max_target;
- uint32_t max_lun;
-} QEMU_PACKED VirtIOSCSIConfig;
-
typedef struct VirtIOSCSIReq {
VirtIOSCSI *dev;
VirtQueue *vq;
@@ -178,7 +66,7 @@ static void virtio_scsi_complete_req(VirtIOSCSIReq *req)
scsi_req_unref(req->sreq);
}
g_free(req);
- virtio_notify(&s->vdev, vq);
+ virtio_notify(&s->vs.vdev, vq);
}
static void virtio_scsi_bad_req(void)
@@ -237,7 +125,7 @@ static void virtio_scsi_save_request(QEMUFile *f, SCSIRequest *sreq)
VirtIOSCSIReq *req = sreq->hba_private;
uint32_t n = virtio_queue_get_id(req->vq) - 2;
- assert(n < req->dev->conf->num_queues);
+ assert(n < req->dev->vs.conf->num_queues);
qemu_put_be32s(f, &n);
qemu_put_buffer(f, (unsigned char *)&req->elem, sizeof(req->elem));
}
@@ -251,9 +139,9 @@ static void *virtio_scsi_load_request(QEMUFile *f, SCSIRequest *sreq)
req = g_malloc(sizeof(*req));
qemu_get_be32s(f, &n);
- assert(n < s->conf->num_queues);
+ assert(n < s->vs.conf->num_queues);
qemu_get_buffer(f, (unsigned char *)&req->elem, sizeof(req->elem));
- virtio_scsi_parse_req(s, s->cmd_vqs[n], req);
+ virtio_scsi_parse_req(s, s->vs.cmd_vqs[n], req);
scsi_req_ref(sreq);
req->sreq = sreq;
@@ -468,8 +356,8 @@ static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
out_size = req->elem.out_sg[0].iov_len;
in_size = req->elem.in_sg[0].iov_len;
- if (out_size < sizeof(VirtIOSCSICmdReq) + s->cdb_size ||
- in_size < sizeof(VirtIOSCSICmdResp) + s->sense_size) {
+ if (out_size < sizeof(VirtIOSCSICmdReq) + s->vs.cdb_size ||
+ in_size < sizeof(VirtIOSCSICmdResp) + s->vs.sense_size) {
virtio_scsi_bad_req();
}
@@ -511,7 +399,7 @@ static void virtio_scsi_get_config(VirtIODevice *vdev,
uint8_t *config)
{
VirtIOSCSIConfig *scsiconf = (VirtIOSCSIConfig *)config;
- VirtIOSCSI *s = (VirtIOSCSI *)vdev;
+ VirtIOSCSICommon *s = (VirtIOSCSICommon *)vdev;
stl_raw(&scsiconf->num_queues, s->conf->num_queues);
stl_raw(&scsiconf->seg_max, 128 - 2);
@@ -537,8 +425,8 @@ static void virtio_scsi_set_config(VirtIODevice *vdev,
exit(1);
}
- s->sense_size = ldl_raw(&scsiconf->sense_size);
- s->cdb_size = ldl_raw(&scsiconf->cdb_size);
+ s->vs.sense_size = ldl_raw(&scsiconf->sense_size);
+ s->vs.cdb_size = ldl_raw(&scsiconf->cdb_size);
}
static uint32_t virtio_scsi_get_features(VirtIODevice *vdev,
@@ -555,8 +443,8 @@ static void virtio_scsi_reset(VirtIODevice *vdev)
qbus_reset_all(&s->bus.qbus);
s->resetting--;
- s->sense_size = VIRTIO_SCSI_SENSE_SIZE;
- s->cdb_size = VIRTIO_SCSI_CDB_SIZE;
+ s->vs.sense_size = VIRTIO_SCSI_SENSE_SIZE;
+ s->vs.cdb_size = VIRTIO_SCSI_CDB_SIZE;
s->events_dropped = false;
}
@@ -566,7 +454,7 @@ static void virtio_scsi_reset(VirtIODevice *vdev)
static void virtio_scsi_save(QEMUFile *f, void *opaque)
{
VirtIOSCSI *s = opaque;
- virtio_save(&s->vdev, f);
+ virtio_save(&s->vs.vdev, f);
}
static int virtio_scsi_load(QEMUFile *f, void *opaque, int version_id)
@@ -574,7 +462,7 @@ static int virtio_scsi_load(QEMUFile *f, void *opaque, int version_id)
VirtIOSCSI *s = opaque;
int ret;
- ret = virtio_load(&s->vdev, f);
+ ret = virtio_load(&s->vs.vdev, f);
if (ret) {
return ret;
}
@@ -584,11 +472,11 @@ static int virtio_scsi_load(QEMUFile *f, void *opaque, int version_id)
static void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
uint32_t event, uint32_t reason)
{
- VirtIOSCSIReq *req = virtio_scsi_pop_req(s, s->event_vq);
+ VirtIOSCSIReq *req = virtio_scsi_pop_req(s, s->vs.event_vq);
VirtIOSCSIEvent *evt;
int in_size;
- if (!(s->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK)) {
+ if (!(s->vs.vdev.status & VIRTIO_CONFIG_S_DRIVER_OK)) {
return;
}
@@ -643,7 +531,7 @@ static void virtio_scsi_change(SCSIBus *bus, SCSIDevice *dev, SCSISense sense)
{
VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
- if (((s->vdev.guest_features >> VIRTIO_SCSI_F_CHANGE) & 1) &&
+ if (((s->vs.vdev.guest_features >> VIRTIO_SCSI_F_CHANGE) & 1) &&
dev->type != TYPE_ROM) {
virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_PARAM_CHANGE,
sense.asc | (sense.ascq << 8));
@@ -654,7 +542,7 @@ static void virtio_scsi_hotplug(SCSIBus *bus, SCSIDevice *dev)
{
VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
- if ((s->vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
+ if ((s->vs.vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_TRANSPORT_RESET,
VIRTIO_SCSI_EVT_RESET_RESCAN);
}
@@ -664,7 +552,7 @@ static void virtio_scsi_hot_unplug(SCSIBus *bus, SCSIDevice *dev)
{
VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
- if ((s->vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
+ if ((s->vs.vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_TRANSPORT_RESET,
VIRTIO_SCSI_EVT_RESET_REMOVED);
}
@@ -686,35 +574,53 @@ static struct SCSIBusInfo virtio_scsi_scsi_info = {
.load_request = virtio_scsi_load_request,
};
-VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf)
+VirtIOSCSICommon *virtio_scsi_init_common(DeviceState *dev, VirtIOSCSIConf *proxyconf,
+ size_t sz)
{
- VirtIOSCSI *s;
- static int virtio_scsi_id;
- size_t sz;
+ VirtIOSCSICommon *s;
int i;
- sz = sizeof(VirtIOSCSI) + proxyconf->num_queues * sizeof(VirtQueue *);
- s = (VirtIOSCSI *)virtio_common_init("virtio-scsi", VIRTIO_ID_SCSI,
- sizeof(VirtIOSCSIConfig), sz);
+ /* Place the cmd_vqs array at the end of the block that the caller
+ * requested. Align the array properly, just in case.
+ */
+ sz = ROUND_UP(sz, sizeof(void *));
+ s = (VirtIOSCSICommon *)
+ virtio_common_init("virtio-scsi", VIRTIO_ID_SCSI,
+ sizeof(VirtIOSCSIConfig),
+ sz + sizeof(VirtQueue *) * proxyconf->num_queues);
s->qdev = dev;
s->conf = proxyconf;
+ s->sense_size = VIRTIO_SCSI_SENSE_SIZE;
+ s->cdb_size = VIRTIO_SCSI_CDB_SIZE;
- /* TODO set up vdev function pointers */
s->vdev.get_config = virtio_scsi_get_config;
- s->vdev.set_config = virtio_scsi_set_config;
- s->vdev.get_features = virtio_scsi_get_features;
- s->vdev.reset = virtio_scsi_reset;
s->ctrl_vq = virtio_add_queue(&s->vdev, VIRTIO_SCSI_VQ_SIZE,
virtio_scsi_handle_ctrl);
s->event_vq = virtio_add_queue(&s->vdev, VIRTIO_SCSI_VQ_SIZE,
virtio_scsi_handle_event);
+
+ s->cmd_vqs = (VirtQueue **) ((char *)s + sz);
for (i = 0; i < s->conf->num_queues; i++) {
s->cmd_vqs[i] = virtio_add_queue(&s->vdev, VIRTIO_SCSI_VQ_SIZE,
virtio_scsi_handle_cmd);
}
+ return s;
+}
+
+VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf)
+{
+ VirtIOSCSI *s;
+ static int virtio_scsi_id;
+
+ s = (VirtIOSCSI *)virtio_scsi_init_common(dev, proxyconf, sizeof(VirtIOSCSI));
+
+ s->vs.vdev.get_features = virtio_scsi_get_features;
+ s->vs.vdev.set_config = virtio_scsi_set_config;
+ s->vs.vdev.reset = virtio_scsi_reset;
+
scsi_bus_new(&s->bus, dev, &virtio_scsi_scsi_info);
if (!dev->hotplugged) {
scsi_bus_legacy_handle_cmdline(&s->bus);
@@ -723,12 +629,12 @@ VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf)
register_savevm(dev, "virtio-scsi", virtio_scsi_id++, 1,
virtio_scsi_save, virtio_scsi_load, s);
- return &s->vdev;
+ return &s->vs.vdev;
}
void virtio_scsi_exit(VirtIODevice *vdev)
{
VirtIOSCSI *s = (VirtIOSCSI *)vdev;
- unregister_savevm(s->qdev, "virtio-scsi", s);
+ unregister_savevm(s->vs.qdev, "virtio-scsi", s);
virtio_cleanup(vdev);
}
diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h
index ccf1e42..2bcf606 100644
--- a/hw/virtio-scsi.h
+++ b/hw/virtio-scsi.h
@@ -26,25 +26,142 @@
#define VIRTIO_SCSI_F_HOTPLUG 1
#define VIRTIO_SCSI_F_CHANGE 2
+#define VIRTIO_SCSI_VQ_SIZE 128
+#define VIRTIO_SCSI_CDB_SIZE 32
+#define VIRTIO_SCSI_SENSE_SIZE 96
+#define VIRTIO_SCSI_MAX_CHANNEL 0
+#define VIRTIO_SCSI_MAX_TARGET 255
+#define VIRTIO_SCSI_MAX_LUN 16383
+
+/* Response codes */
+#define VIRTIO_SCSI_S_OK 0
+#define VIRTIO_SCSI_S_OVERRUN 1
+#define VIRTIO_SCSI_S_ABORTED 2
+#define VIRTIO_SCSI_S_BAD_TARGET 3
+#define VIRTIO_SCSI_S_RESET 4
+#define VIRTIO_SCSI_S_BUSY 5
+#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
+#define VIRTIO_SCSI_S_TARGET_FAILURE 7
+#define VIRTIO_SCSI_S_NEXUS_FAILURE 8
+#define VIRTIO_SCSI_S_FAILURE 9
+#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10
+#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11
+#define VIRTIO_SCSI_S_INCORRECT_LUN 12
+
+/* Controlq type codes. */
+#define VIRTIO_SCSI_T_TMF 0
+#define VIRTIO_SCSI_T_AN_QUERY 1
+#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2
+
+/* Valid TMF subtypes. */
+#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0
+#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1
+#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2
+#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3
+#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4
+#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5
+#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6
+#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7
+
+/* Events. */
+#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000
+#define VIRTIO_SCSI_T_NO_EVENT 0
+#define VIRTIO_SCSI_T_TRANSPORT_RESET 1
+#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
+#define VIRTIO_SCSI_T_PARAM_CHANGE 3
+
+/* Reasons for transport reset event */
+#define VIRTIO_SCSI_EVT_RESET_HARD 0
+#define VIRTIO_SCSI_EVT_RESET_RESCAN 1
+#define VIRTIO_SCSI_EVT_RESET_REMOVED 2
+
+/* SCSI command request, followed by data-out */
+typedef struct {
+ uint8_t lun[8]; /* Logical Unit Number */
+ uint64_t tag; /* Command identifier */
+ uint8_t task_attr; /* Task attribute */
+ uint8_t prio;
+ uint8_t crn;
+ uint8_t cdb[];
+} QEMU_PACKED VirtIOSCSICmdReq;
+
+/* Response, followed by sense data and data-in */
+typedef struct {
+ uint32_t sense_len; /* Sense data length */
+ uint32_t resid; /* Residual bytes in data buffer */
+ uint16_t status_qualifier; /* Status qualifier */
+ uint8_t status; /* Command completion status */
+ uint8_t response; /* Response values */
+ uint8_t sense[];
+} QEMU_PACKED VirtIOSCSICmdResp;
+
+/* Task Management Request */
+typedef struct {
+ uint32_t type;
+ uint32_t subtype;
+ uint8_t lun[8];
+ uint64_t tag;
+} QEMU_PACKED VirtIOSCSICtrlTMFReq;
+
+typedef struct {
+ uint8_t response;
+} QEMU_PACKED VirtIOSCSICtrlTMFResp;
+
+/* Asynchronous notification query/subscription */
+typedef struct {
+ uint32_t type;
+ uint8_t lun[8];
+ uint32_t event_requested;
+} QEMU_PACKED VirtIOSCSICtrlANReq;
+
+typedef struct {
+ uint32_t event_actual;
+ uint8_t response;
+} QEMU_PACKED VirtIOSCSICtrlANResp;
+
+typedef struct {
+ uint32_t event;
+ uint8_t lun[8];
+ uint32_t reason;
+} QEMU_PACKED VirtIOSCSIEvent;
+
+typedef struct {
+ uint32_t num_queues;
+ uint32_t seg_max;
+ uint32_t max_sectors;
+ uint32_t cmd_per_lun;
+ uint32_t event_info_size;
+ uint32_t sense_size;
+ uint32_t cdb_size;
+ uint16_t max_channel;
+ uint16_t max_target;
+ uint32_t max_lun;
+} QEMU_PACKED VirtIOSCSIConfig;
+
struct VirtIOSCSIConf {
uint32_t num_queues;
uint32_t max_sectors;
uint32_t cmd_per_lun;
};
-typedef struct VirtIOSCSI {
+typedef struct VirtIOSCSICommon {
VirtIODevice vdev;
DeviceState *qdev;
VirtIOSCSIConf *conf;
- SCSIBus bus;
uint32_t sense_size;
uint32_t cdb_size;
- int resetting;
- bool events_dropped;
VirtQueue *ctrl_vq;
VirtQueue *event_vq;
- VirtQueue *cmd_vqs[0];
+ VirtQueue **cmd_vqs;
+} VirtIOSCSICommon;
+
+typedef struct {
+ VirtIOSCSICommon vs;
+
+ SCSIBus bus;
+ int resetting;
+ bool events_dropped;
} VirtIOSCSI;
#define DEFINE_VIRTIO_SCSI_PROPERTIES(_state, _features_field, _conf_field) \
@@ -55,4 +172,7 @@ typedef struct VirtIOSCSI {
DEFINE_PROP_BIT("hotplug", _state, _features_field, VIRTIO_SCSI_F_HOTPLUG, true), \
DEFINE_PROP_BIT("param_change", _state, _features_field, VIRTIO_SCSI_F_CHANGE, true)
+VirtIOSCSICommon *virtio_scsi_init_common(DeviceState *dev, VirtIOSCSIConf *proxyconf,
+ size_t sz);
+
#endif /* _QEMU_VIRTIO_SCSI_H */
diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h
index df24400..8b465fd 100644
--- a/include/qemu/osdep.h
+++ b/include/qemu/osdep.h
@@ -67,6 +67,10 @@ typedef signed int int_fast16_t;
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#endif
+#ifndef ROUND_UP
+#define ROUND_UP(n,d) (((n) + (d) - 1) & -(d))
+#endif
+
#ifndef DIV_ROUND_UP
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#endif
--
1.7.2.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH-v2 2/2] vhost-scsi: new device supporting the tcm_vhost Linux kernel module
2013-03-29 1:08 [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci Nicholas A. Bellinger
2013-03-29 1:08 ` [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon Nicholas A. Bellinger
@ 2013-03-29 1:08 ` Nicholas A. Bellinger
2013-03-29 6:39 ` [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci Asias He
2 siblings, 0 replies; 9+ messages in thread
From: Nicholas A. Bellinger @ 2013-03-29 1:08 UTC (permalink / raw)
To: target-devel
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, lf-virt,
Anthony Liguori, Stefan Hajnoczi, Paolo Bonzini, Asias He
From: Paolo Bonzini <pbonzini@redhat.com>
The WWPN specified in configfs is passed to "-device vhost-scsi-pci".
The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not
available from the QEMU command-line. Instead, I hardcode it to zero.
Changes in Patch-v2:
- Add vhost_scsi_get_features() in order to determine feature bits
supports by host kernel (mst + nab)
- Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
EVENT_IDX to be disabled by host in vhost_scsi_get_features()
- Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES
Changes in Patch-v1:
- Set event_idx=off by default (nab, thanks asias)
- Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to
re-enable in v3.10 (nab)
- Update to latest qemu.git/master HEAD
Changes in WIP-V3:
- Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha)
- Add CONFIG_VHOST_SCSI (asias, thanks stefanha)
- Add hotplug feature bit
Changes in WIP-V2:
- Add backend guest masking support (nab)
- Bump ABI_VERSION to 1 (nab)
- Set up set_guest_notifiers (asias)
- Set up vs->dev.vq_index (asias)
- Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias)
- Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias)
Howto:
Use the latest seabios, at least commit b44a7be17b
git clone git://git.seabios.org/seabios.git
make
cp out/bios.bin /usr/share/qemu/bios.bin
qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off
...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
configure | 15 +++-
hw/Makefile.objs | 5 +-
hw/s390x/s390-virtio-bus.c | 35 ++++++
hw/vhost-scsi.c | 264 ++++++++++++++++++++++++++++++++++++++++++++
hw/vhost-scsi.h | 64 +++++++++++
hw/virtio-pci.c | 62 ++++++++++
hw/virtio-scsi.h | 2 +
7 files changed, 445 insertions(+), 2 deletions(-)
create mode 100644 hw/vhost-scsi.c
create mode 100644 hw/vhost-scsi.h
diff --git a/configure b/configure
index f2af714..6b67e35 100755
--- a/configure
+++ b/configure
@@ -169,6 +169,7 @@ libattr=""
xfs=""
vhost_net="no"
+vhost_scsi="no"
kvm="no"
gprof="no"
debug_tcg="no"
@@ -532,6 +533,7 @@ Haiku)
usb="linux"
kvm="yes"
vhost_net="yes"
+ vhost_scsi="yes"
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
audio_possible_drivers="$audio_possible_drivers fmod"
fi
@@ -858,6 +860,10 @@ for opt do
;;
--enable-vhost-net) vhost_net="yes"
;;
+ --disable-vhost-scsi) vhost_scsi="no"
+ ;;
+ --enable-vhost-scsi) vhost_scsi="yes"
+ ;;
--disable-glx) glx="no"
;;
--enable-glx) glx="yes"
@@ -3078,7 +3084,7 @@ fi
# __sync_fetch_and_and requires at least -march=i486. Many toolchains
# use i686 as default anyway, but for those that don't, an explicit
# specification is necessary
-if test "$vhost_net" = "yes" && test "$cpu" = "i386"; then
+if (test "$vhost_net" = "yes" -o "$vhost_scsi" = "yes") && test "$cpu" = "i386"; then
cat > $TMPC << EOF
static int sfaa(int *ptr)
{
@@ -3424,6 +3430,7 @@ echo "sigev_thread_id $sigev_thread_id"
echo "uuid support $uuid"
echo "libcap-ng support $cap_ng"
echo "vhost-net support $vhost_net"
+echo "vhost-scsi support $vhost_scsi"
echo "Trace backend $trace_backend"
echo "Trace output file $trace_file-<pid>"
echo "spice support $spice ($spice_protocol_version/$spice_server_version)"
@@ -3697,6 +3704,9 @@ fi
if test "$virtfs" = "yes" ; then
echo "CONFIG_VIRTFS=y" >> $config_host_mak
fi
+if test "$vhost_scsi" = "yes" ; then
+ echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
+fi
if test "$blobs" = "yes" ; then
echo "INSTALL_BLOBS=yes" >> $config_host_mak
fi
@@ -4175,6 +4185,9 @@ case "$target_arch2" in
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
+ if test "$vhost_scsi" = "yes" ; then
+ echo "CONFIG_VHOST_SCSI=y" >> $config_target_mak
+ fi
fi
esac
case "$target_arch2" in
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index d0b2ecb..0a38eb5 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -205,8 +205,11 @@ common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o xenfb.o xen_disk.o xen_nic.o
obj-$(CONFIG_VIRTIO) += dataplane/
obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o
obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o virtio-scsi.o
+ifeq ($(CONFIG_VIRTIO), y)
+obj-$(CONFIG_LINUX) += vhost-scsi.o
+endif
obj-$(CONFIG_SOFTMMU) += vhost_net.o
-obj-$(CONFIG_VHOST_NET) += vhost.o
+obj-$(CONFIG_LINUX) += vhost.o
obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/
obj-$(CONFIG_VGA) += vga.o
diff --git a/hw/s390x/s390-virtio-bus.c b/hw/s390x/s390-virtio-bus.c
index c5d5456..73d93fd 100644
--- a/hw/s390x/s390-virtio-bus.c
+++ b/hw/s390x/s390-virtio-bus.c
@@ -28,6 +28,8 @@
#include "hw/virtio-rng.h"
#include "hw/virtio-serial.h"
#include "hw/virtio-net.h"
+#include "hw/virtio-scsi.h"
+#include "hw/vhost-scsi.h"
#include "hw/sysbus.h"
#include "sysemu/kvm.h"
@@ -214,6 +216,18 @@ static int s390_virtio_scsi_init(VirtIOS390Device *dev)
return s390_virtio_device_init(dev, vdev);
}
+static int s390_vhost_scsi_init(VirtIOS390Device *dev)
+{
+ VirtIODevice *vdev;
+
+ vdev = vhost_scsi_init((DeviceState *)dev, &dev->scsi);
+ if (!vdev) {
+ return -1;
+ }
+
+ return s390_virtio_device_init(dev, vdev);
+}
+
static int s390_virtio_rng_init(VirtIOS390Device *dev)
{
VirtIODevice *vdev;
@@ -537,6 +551,27 @@ static const TypeInfo virtio_s390_device_info = {
.abstract = true,
};
+static Property s390_vhost_scsi_properties[] = {
+ DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOS390Device, host_features, scsi),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void s390_vhost_scsi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtIOS390DeviceClass *k = VIRTIO_S390_DEVICE_CLASS(klass);
+
+ k->init = s390_vhost_scsi_init;
+ dc->props = s390_vhost_scsi_properties;
+}
+
+static const TypeInfo s390_vhost_scsi = {
+ .name = "vhost-scsi-s390",
+ .parent = TYPE_VIRTIO_S390_DEVICE,
+ .instance_size = sizeof(VirtIOS390Device),
+ .class_init = s390_vhost_scsi_class_init,
+};
+
static Property s390_virtio_scsi_properties[] = {
DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOS390Device, host_features, scsi),
DEFINE_PROP_END_OF_LIST(),
diff --git a/hw/vhost-scsi.c b/hw/vhost-scsi.c
new file mode 100644
index 0000000..adc929b
--- /dev/null
+++ b/hw/vhost-scsi.c
@@ -0,0 +1,264 @@
+/*
+ * vhost_scsi host device
+ *
+ * Copyright IBM, Corp. 2011
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ *
+ * Changes for QEMU mainline + tcm_vhost kernel upstream:
+ * Nicholas Bellinger <nab@risingtidesystems.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include <sys/ioctl.h>
+#include "config.h"
+#include "qemu/queue.h"
+#include "monitor/monitor.h"
+#include "migration/migration.h"
+#include "vhost-scsi.h"
+#include "vhost.h"
+#include "virtio-scsi.h"
+
+typedef struct VHostSCSI {
+ VirtIOSCSICommon vs;
+
+ Error *migration_blocker;
+
+ struct vhost_dev dev;
+} VHostSCSI;
+
+static int vhost_scsi_set_endpoint(VirtIODevice *vdev)
+{
+ VHostSCSI *vs = (VHostSCSI *)vdev;
+ struct vhost_scsi_target backend;
+ int ret;
+
+ memset(&backend, 0, sizeof(backend));
+ pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->vs.conf->wwpn);
+ ret = ioctl(vs->dev.control, VHOST_SCSI_SET_ENDPOINT, &backend);
+ if (ret < 0) {
+ return -errno;
+ }
+ return 0;
+}
+
+static void vhost_scsi_clear_endpoint(VirtIODevice *vdev)
+{
+ VHostSCSI *vs = (VHostSCSI *)vdev;
+ struct vhost_scsi_target backend;
+
+ memset(&backend, 0, sizeof(backend));
+ pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->vs.conf->wwpn);
+ ioctl(vs->dev.control, VHOST_SCSI_CLEAR_ENDPOINT, &backend);
+}
+
+static int vhost_scsi_start(VHostSCSI *vs, VirtIODevice *vdev)
+{
+ int ret, abi_version;
+
+ if (!vdev->binding->set_guest_notifiers) {
+ error_report("binding does not support guest notifiers");
+ return -ENOSYS;
+ }
+
+ ret = ioctl(vs->dev.control, VHOST_SCSI_GET_ABI_VERSION, &abi_version);
+ if (ret < 0) {
+ return -errno;
+ }
+ if (abi_version > VHOST_SCSI_ABI_VERSION) {
+ error_report("vhost-scsi: The running tcm_vhost kernel abi_version:"
+ " %d is greater than vhost_scsi userspace supports: %d, please"
+ " upgrade your version of QEMU\n", abi_version,
+ VHOST_SCSI_ABI_VERSION);
+ return -ENOSYS;
+ }
+
+ ret = vhost_dev_enable_notifiers(&vs->dev, vdev);
+ if (ret < 0) {
+ return ret;
+ }
+
+ ret = vhost_dev_start(&vs->dev, vdev);
+ if (ret < 0) {
+ error_report("Error start vhost dev");
+ goto err_notifiers;
+ }
+
+ ret = vhost_scsi_set_endpoint(vdev);
+ if (ret < 0) {
+ error_report("Error set vhost-scsi endpoint");
+ goto err_vhost_stop;
+ }
+
+ ret = vdev->binding->set_guest_notifiers(vdev->binding_opaque, vs->dev.nvqs, true);
+ if (ret < 0) {
+ error_report("Error binding guest notifier");
+ goto err_endpoint;
+ }
+ return ret;
+
+err_endpoint:
+ vhost_scsi_clear_endpoint(vdev);
+err_vhost_stop:
+ vhost_dev_stop(&vs->dev, vdev);
+err_notifiers:
+ vhost_dev_disable_notifiers(&vs->dev, vdev);
+ return ret;
+}
+
+static void vhost_scsi_stop(VHostSCSI *vs, VirtIODevice *vdev)
+{
+ int ret = 0;
+
+ if (!vdev->binding->set_guest_notifiers) {
+ ret = vdev->binding->set_guest_notifiers(vdev->binding_opaque,
+ vs->dev.nvqs, false);
+ if (ret < 0) {
+ error_report("vhost guest notifier cleanup failed: %d\n", ret);
+ }
+ }
+ assert(ret >= 0);
+
+ vhost_scsi_clear_endpoint(vdev);
+ vhost_dev_stop(&vs->dev, vdev);
+ vhost_dev_disable_notifiers(&vs->dev, vdev);
+}
+
+static uint32_t vhost_scsi_get_features(VirtIODevice *vdev,
+ uint32_t features)
+{
+ VHostSCSI *vs = (VHostSCSI *)vdev;
+
+ /* Clear features not supported by host kernel. */
+ if (!(vs->dev.features & (1 << VIRTIO_F_NOTIFY_ON_EMPTY))) {
+ features &= ~(1 << VIRTIO_F_NOTIFY_ON_EMPTY);
+ }
+ if (!(vs->dev.features & (1 << VIRTIO_RING_F_INDIRECT_DESC))) {
+ features &= ~(1 << VIRTIO_RING_F_INDIRECT_DESC);
+ }
+ if (!(vs->dev.features & (1 << VIRTIO_RING_F_EVENT_IDX))) {
+ features &= ~(1 << VIRTIO_RING_F_EVENT_IDX);
+ }
+ if (!(vs->dev.features & (1 << VIRTIO_SCSI_F_HOTPLUG))) {
+ features &= ~(1 << VIRTIO_SCSI_F_HOTPLUG);
+ }
+
+ return features;
+}
+
+static void vhost_scsi_set_config(VirtIODevice *vdev,
+ const uint8_t *config)
+{
+ VirtIOSCSIConfig *scsiconf = (VirtIOSCSIConfig *)config;
+ VHostSCSI *vs = (VHostSCSI *)vdev;
+
+ if ((uint32_t) ldl_raw(&scsiconf->sense_size) != vs->vs.sense_size ||
+ (uint32_t) ldl_raw(&scsiconf->cdb_size) != vs->vs.cdb_size) {
+ error_report("vhost-scsi does not support changing the sense data and CDB sizes");
+ exit(1);
+ }
+}
+
+static void vhost_scsi_set_status(VirtIODevice *vdev, uint8_t val)
+{
+ VHostSCSI *vs = (VHostSCSI *)vdev;
+ bool start = (val & VIRTIO_CONFIG_S_DRIVER_OK);
+
+ if (vs->dev.started == start) {
+ return;
+ }
+
+ if (start) {
+ int ret;
+
+ ret = vhost_scsi_start(vs, vdev);
+ if (ret < 0) {
+ error_report("virtio-scsi: unable to start vhost: %s\n",
+ strerror(-ret));
+
+ /* There is no userspace virtio-scsi fallback so exit */
+ exit(1);
+ }
+ } else {
+ vhost_scsi_stop(vs, vdev);
+ }
+}
+
+static void vhost_scsi_guest_notifier_mask(VirtIODevice *vdev, int idx,
+ bool mask)
+{
+ VHostSCSI *vs = (VHostSCSI *)vdev;
+
+ vhost_virtqueue_mask(&vs->dev, vdev, idx, mask);
+}
+
+static bool vhost_scsi_guest_notifier_pending(VirtIODevice *vdev, int idx)
+{
+ VHostSCSI *vs = (VHostSCSI *)vdev;
+
+ return vhost_virtqueue_pending(&vs->dev, idx);
+}
+
+VirtIODevice *vhost_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf)
+{
+ VHostSCSI *vs;
+ int vhostfd = -1;
+ int ret;
+
+ if (!proxyconf->wwpn) {
+ error_report("vhost-scsi: missing wwpn\n");
+ return NULL;
+ }
+
+ if (proxyconf->vhostfd) {
+ vhostfd = monitor_handle_fd_param(cur_mon, proxyconf->vhostfd);
+ if (vhostfd == -1) {
+ error_report("vhost-scsi: unable to parse vhostfd\n");
+ return NULL;
+ }
+ }
+
+ vs = (VHostSCSI *)virtio_scsi_init_common(dev, proxyconf,
+ sizeof(VHostSCSI));
+
+ vs->vs.vdev.get_features = vhost_scsi_get_features;
+ vs->vs.vdev.set_config = vhost_scsi_set_config;
+ vs->vs.vdev.set_status = vhost_scsi_set_status;
+ vs->vs.vdev.guest_notifier_mask = vhost_scsi_guest_notifier_mask;
+ vs->vs.vdev.guest_notifier_pending = vhost_scsi_guest_notifier_pending;
+
+ vs->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->vs.conf->num_queues;
+ vs->dev.vqs = g_new(struct vhost_virtqueue, vs->dev.nvqs);
+ vs->dev.vq_index = 0;
+
+ ret = vhost_dev_init(&vs->dev, vhostfd, "/dev/vhost-scsi", true);
+ if (ret < 0) {
+ error_report("vhost-scsi: vhost initialization failed: %s\n",
+ strerror(-ret));
+ return NULL;
+ }
+ vs->dev.backend_features = 0;
+ vs->dev.acked_features = vs->dev.features;
+
+ error_setg(&vs->migration_blocker,
+ "vhost-scsi does not support migration");
+ migrate_add_blocker(vs->migration_blocker);
+
+ return &vs->vs.vdev;
+}
+
+void vhost_scsi_exit(VirtIODevice *vdev)
+{
+ VHostSCSI *vs = (VHostSCSI *)vdev;
+ migrate_del_blocker(vs->migration_blocker);
+ error_free(vs->migration_blocker);
+
+ /* This will stop vhost backend. */
+ vhost_scsi_set_status(vdev, 0);
+ g_free(vs->dev.vqs);
+ virtio_cleanup(vdev);
+}
diff --git a/hw/vhost-scsi.h b/hw/vhost-scsi.h
new file mode 100644
index 0000000..70f4a58
--- /dev/null
+++ b/hw/vhost-scsi.h
@@ -0,0 +1,64 @@
+/*
+ * vhost_scsi host device
+ *
+ * Copyright IBM, Corp. 2011
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#ifndef VHOST_SCSI_H
+#define VHOST_SCSI_H
+
+#include "qemu-common.h"
+#include "qdev.h"
+#include "virtio-scsi.h"
+
+/*
+ * Used by QEMU userspace to ensure a consistent vhost-scsi ABI.
+ *
+ * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate +
+ * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage
+ * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target.
+ * All the targets under vhost_wwpn can be seen and used by guest.
+ */
+
+#define VHOST_SCSI_ABI_VERSION 1
+
+/* TODO #include <linux/vhost.h> properly */
+/* For VHOST_SCSI_SET_ENDPOINT/VHOST_SCSI_CLEAR_ENDPOINT ioctl */
+struct vhost_scsi_target {
+ int abi_version;
+ char vhost_wwpn[224];
+ unsigned short vhost_tpgt;
+ unsigned short reserved;
+};
+
+enum vhost_scsi_vq_list {
+ VHOST_SCSI_VQ_CONTROL = 0,
+ VHOST_SCSI_VQ_EVENT = 1,
+ VHOST_SCSI_VQ_NUM_FIXED = 2,
+};
+
+#define VHOST_VIRTIO 0xAF
+#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
+#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
+#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int)
+
+#define DEFINE_VHOST_SCSI_PROPERTIES(_state, _features_field, _conf_field) \
+ DEFINE_VIRTIO_COMMON_FEATURES(_state, _features_field), \
+ DEFINE_PROP_STRING("vhostfd", _state, _conf_field.vhostfd), \
+ DEFINE_PROP_STRING("wwpn", _state, _conf_field.wwpn), \
+ DEFINE_PROP_UINT32("num_queues", _state, _conf_field.num_queues, 1), \
+ DEFINE_PROP_UINT32("max_sectors", _state, _conf_field.max_sectors, 0xFFFF), \
+ DEFINE_PROP_UINT32("cmd_per_lun", _state, _conf_field.cmd_per_lun, 128)
+
+VirtIODevice *vhost_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf);
+void vhost_scsi_exit(VirtIODevice *vdev);
+
+
+#endif
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index f3ece78..0d67b84 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -22,6 +22,7 @@
#include "hw/virtio-net.h"
#include "hw/virtio-serial.h"
#include "hw/virtio-scsi.h"
+#include "hw/vhost-scsi.h"
#include "hw/pci/pci.h"
#include "qemu/error-report.h"
#include "hw/pci/msi.h"
@@ -1247,6 +1248,64 @@ static const TypeInfo virtio_scsi_info = {
.class_init = virtio_scsi_class_init,
};
+#ifdef CONFIG_VHOST_SCSI
+static int vhost_scsi_init_pci(PCIDevice *pci_dev)
+{
+ VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
+ VirtIODevice *vdev;
+
+ vdev = vhost_scsi_init(&pci_dev->qdev, &proxy->scsi);
+ if (!vdev) {
+ return -EINVAL;
+ }
+
+ vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED
+ ? proxy->scsi.num_queues + 3
+ : proxy->nvectors;
+ virtio_init_pci(proxy, vdev);
+
+ /* make the actual value visible */
+ proxy->nvectors = vdev->nvectors;
+ return 0;
+}
+
+static void vhost_scsi_exit_pci(PCIDevice *pci_dev)
+{
+ VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
+
+ vhost_scsi_exit(proxy->vdev);
+ virtio_exit_pci(pci_dev);
+}
+
+static Property vhost_scsi_properties[] = {
+ DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, DEV_NVECTORS_UNSPECIFIED),
+ DEFINE_VHOST_SCSI_PROPERTIES(VirtIOPCIProxy, host_features, scsi),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void vhost_scsi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->init = vhost_scsi_init_pci;
+ k->exit = vhost_scsi_exit_pci;
+ k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
+ k->device_id = PCI_DEVICE_ID_VIRTIO_SCSI;
+ k->revision = 0x00;
+ k->class_id = PCI_CLASS_STORAGE_SCSI;
+ dc->reset = virtio_pci_reset;
+ dc->props = vhost_scsi_properties;
+}
+
+static const TypeInfo vhost_scsi_info = {
+ .name = "vhost-scsi-pci",
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(VirtIOPCIProxy),
+ .class_init = vhost_scsi_class_init,
+};
+#endif
+
#ifdef CONFIG_VIRTFS
static int virtio_9p_init_pci(PCIDevice *pci_dev)
{
@@ -1495,6 +1554,9 @@ static void virtio_pci_register_types(void)
type_register_static(&virtio_serial_info);
type_register_static(&virtio_balloon_info);
type_register_static(&virtio_scsi_info);
+#ifdef CONFIG_VHOST_SCSI
+ type_register_static(&vhost_scsi_info);
+#endif
type_register_static(&virtio_rng_info);
type_register_static(&virtio_pci_bus_info);
type_register_static(&virtio_pci_info);
diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h
index 2bcf606..356bf38 100644
--- a/hw/virtio-scsi.h
+++ b/hw/virtio-scsi.h
@@ -142,6 +142,8 @@ struct VirtIOSCSIConf {
uint32_t num_queues;
uint32_t max_sectors;
uint32_t cmd_per_lun;
+ char *vhostfd;
+ char *wwpn;
};
typedef struct VirtIOSCSICommon {
--
1.7.2.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci
2013-03-29 1:08 [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci Nicholas A. Bellinger
2013-03-29 1:08 ` [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon Nicholas A. Bellinger
2013-03-29 1:08 ` [Qemu-devel] [PATCH-v2 2/2] vhost-scsi: new device supporting the tcm_vhost Linux kernel module Nicholas A. Bellinger
@ 2013-03-29 6:39 ` Asias He
2013-03-29 6:48 ` Nicholas A. Bellinger
2 siblings, 1 reply; 9+ messages in thread
From: Asias He @ 2013-03-29 6:39 UTC (permalink / raw)
To: Nicholas A. Bellinger
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, lf-virt,
Anthony Liguori, target-devel, Stefan Hajnoczi, Paolo Bonzini
On Fri, Mar 29, 2013 at 01:08:14AM +0000, Nicholas A. Bellinger wrote:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
>
> Hi QEMU folks,
>
> The following is the patch-v2 series to support vhost-scsi-pci within
> the upstream QEMU tree.
>
> This includes the refactoring of existing virtio-scsi code from Paolo
> to allow a VirtIOSCSICommon structure that is shared amoungst existing
> virtio-scsi-pci device and new vhost-scsi-pci device code.
>
> Currently this code requires Asias's seabios bugfixes (commit 5a7730db5
> and b44a7be17), and two other tcm_vhost patches to reset vq->last_used_idx
> after seabios handoff and disable EVENT_IDX from GET_FEATURES that's
> currently in flight for v3.9.0 kernel code.
>
> There is a seperate issue with seabios virtio-scsi that's causing a failure
> in vhost_verify_ring_mappings() is still being tracked down, but this series
> should now be getting close to a merge minus this last outstanding item.
>
> Changes in Patch-v2:
> - Move ->get_features() assignment to virtio_scsi_init() instead of
> virtio_scsi_init_common() (nab)
> - Add vhost_scsi_get_features() in order to determine feature bits
> supports by host kernel (mst + nab)
> - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
> EVENT_IDX to be disabled by host in vhost_scsi_get_features() (mst)
> - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES (mst)
> - Drop vhost_verify_ring_mappings() enable-only hack (mst)
>
> A big thanks to Paolo, Asias, MST, and Stefan for all of their efforts
> on this series.
>
> Thank you,
>
> Paolo Bonzini (2):
> virtio-scsi: create VirtIOSCSICommon
> vhost-scsi: new device supporting the tcm_vhost Linux kernel module
Seems this does not apply against latest qemu/master. Could you rebase.
> configure | 15 +++-
> hw/Makefile.objs | 5 +-
> hw/s390x/s390-virtio-bus.c | 35 ++++++
> hw/vhost-scsi.c | 264 ++++++++++++++++++++++++++++++++++++++++++++
> hw/vhost-scsi.h | 64 +++++++++++
> hw/virtio-pci.c | 62 ++++++++++
> hw/virtio-scsi.c | 192 ++++++++------------------------
> hw/virtio-scsi.h | 132 +++++++++++++++++++++-
> include/qemu/osdep.h | 4 +
> 9 files changed, 623 insertions(+), 150 deletions(-)
> create mode 100644 hw/vhost-scsi.c
> create mode 100644 hw/vhost-scsi.h
>
> --
> 1.7.2.5
>
--
Asias
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci
2013-03-29 6:39 ` [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci Asias He
@ 2013-03-29 6:48 ` Nicholas A. Bellinger
2013-03-29 6:55 ` Asias He
0 siblings, 1 reply; 9+ messages in thread
From: Nicholas A. Bellinger @ 2013-03-29 6:48 UTC (permalink / raw)
To: Asias He
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, lf-virt,
Anthony Liguori, target-devel, Stefan Hajnoczi, Paolo Bonzini
On Fri, 2013-03-29 at 14:39 +0800, Asias He wrote:
> On Fri, Mar 29, 2013 at 01:08:14AM +0000, Nicholas A. Bellinger wrote:
> > From: Nicholas Bellinger <nab@linux-iscsi.org>
> >
> > Hi QEMU folks,
> >
> > The following is the patch-v2 series to support vhost-scsi-pci within
> > the upstream QEMU tree.
> >
> > This includes the refactoring of existing virtio-scsi code from Paolo
> > to allow a VirtIOSCSICommon structure that is shared amoungst existing
> > virtio-scsi-pci device and new vhost-scsi-pci device code.
> >
> > Currently this code requires Asias's seabios bugfixes (commit 5a7730db5
> > and b44a7be17), and two other tcm_vhost patches to reset vq->last_used_idx
> > after seabios handoff and disable EVENT_IDX from GET_FEATURES that's
> > currently in flight for v3.9.0 kernel code.
> >
> > There is a seperate issue with seabios virtio-scsi that's causing a failure
> > in vhost_verify_ring_mappings() is still being tracked down, but this series
> > should now be getting close to a merge minus this last outstanding item.
> >
> > Changes in Patch-v2:
> > - Move ->get_features() assignment to virtio_scsi_init() instead of
> > virtio_scsi_init_common() (nab)
> > - Add vhost_scsi_get_features() in order to determine feature bits
> > supports by host kernel (mst + nab)
> > - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
> > EVENT_IDX to be disabled by host in vhost_scsi_get_features() (mst)
> > - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES (mst)
> > - Drop vhost_verify_ring_mappings() enable-only hack (mst)
> >
> > A big thanks to Paolo, Asias, MST, and Stefan for all of their efforts
> > on this series.
> >
> > Thank you,
> >
> > Paolo Bonzini (2):
> > virtio-scsi: create VirtIOSCSICommon
> > vhost-scsi: new device supporting the tcm_vhost Linux kernel module
>
> Seems this does not apply against latest qemu/master. Could you rebase.
>
Fast moving target.. ;)
Will rebase against qemu/master for -v3 after MST's comments on the
other patches for (better) handling of uninitialized VQs during seabios
-> virtio-scsi LLD guest hand-off.
> > configure | 15 +++-
> > hw/Makefile.objs | 5 +-
> > hw/s390x/s390-virtio-bus.c | 35 ++++++
> > hw/vhost-scsi.c | 264 ++++++++++++++++++++++++++++++++++++++++++++
> > hw/vhost-scsi.h | 64 +++++++++++
> > hw/virtio-pci.c | 62 ++++++++++
> > hw/virtio-scsi.c | 192 ++++++++------------------------
> > hw/virtio-scsi.h | 132 +++++++++++++++++++++-
> > include/qemu/osdep.h | 4 +
> > 9 files changed, 623 insertions(+), 150 deletions(-)
> > create mode 100644 hw/vhost-scsi.c
> > create mode 100644 hw/vhost-scsi.h
> >
> > --
> > 1.7.2.5
> >
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci
2013-03-29 6:48 ` Nicholas A. Bellinger
@ 2013-03-29 6:55 ` Asias He
0 siblings, 0 replies; 9+ messages in thread
From: Asias He @ 2013-03-29 6:55 UTC (permalink / raw)
To: Nicholas A. Bellinger
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, lf-virt,
Anthony Liguori, target-devel, Stefan Hajnoczi, Paolo Bonzini
On Thu, Mar 28, 2013 at 11:48:59PM -0700, Nicholas A. Bellinger wrote:
> On Fri, 2013-03-29 at 14:39 +0800, Asias He wrote:
> > On Fri, Mar 29, 2013 at 01:08:14AM +0000, Nicholas A. Bellinger wrote:
> > > From: Nicholas Bellinger <nab@linux-iscsi.org>
> > >
> > > Hi QEMU folks,
> > >
> > > The following is the patch-v2 series to support vhost-scsi-pci within
> > > the upstream QEMU tree.
> > >
> > > This includes the refactoring of existing virtio-scsi code from Paolo
> > > to allow a VirtIOSCSICommon structure that is shared amoungst existing
> > > virtio-scsi-pci device and new vhost-scsi-pci device code.
> > >
> > > Currently this code requires Asias's seabios bugfixes (commit 5a7730db5
> > > and b44a7be17), and two other tcm_vhost patches to reset vq->last_used_idx
> > > after seabios handoff and disable EVENT_IDX from GET_FEATURES that's
> > > currently in flight for v3.9.0 kernel code.
> > >
> > > There is a seperate issue with seabios virtio-scsi that's causing a failure
> > > in vhost_verify_ring_mappings() is still being tracked down, but this series
> > > should now be getting close to a merge minus this last outstanding item.
> > >
> > > Changes in Patch-v2:
> > > - Move ->get_features() assignment to virtio_scsi_init() instead of
> > > virtio_scsi_init_common() (nab)
> > > - Add vhost_scsi_get_features() in order to determine feature bits
> > > supports by host kernel (mst + nab)
> > > - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
> > > EVENT_IDX to be disabled by host in vhost_scsi_get_features() (mst)
> > > - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES (mst)
> > > - Drop vhost_verify_ring_mappings() enable-only hack (mst)
> > >
> > > A big thanks to Paolo, Asias, MST, and Stefan for all of their efforts
> > > on this series.
> > >
> > > Thank you,
> > >
> > > Paolo Bonzini (2):
> > > virtio-scsi: create VirtIOSCSICommon
> > > vhost-scsi: new device supporting the tcm_vhost Linux kernel module
> >
> > Seems this does not apply against latest qemu/master. Could you rebase.
> >
>
> Fast moving target.. ;)
>
> Will rebase against qemu/master for -v3 after MST's comments on the
> other patches for (better) handling of uninitialized VQs during seabios
> -> virtio-scsi LLD guest hand-off.
ok ;-)
> > > configure | 15 +++-
> > > hw/Makefile.objs | 5 +-
> > > hw/s390x/s390-virtio-bus.c | 35 ++++++
> > > hw/vhost-scsi.c | 264 ++++++++++++++++++++++++++++++++++++++++++++
> > > hw/vhost-scsi.h | 64 +++++++++++
> > > hw/virtio-pci.c | 62 ++++++++++
> > > hw/virtio-scsi.c | 192 ++++++++------------------------
> > > hw/virtio-scsi.h | 132 +++++++++++++++++++++-
> > > include/qemu/osdep.h | 4 +
> > > 9 files changed, 623 insertions(+), 150 deletions(-)
> > > create mode 100644 hw/vhost-scsi.c
> > > create mode 100644 hw/vhost-scsi.h
> > >
> > > --
> > > 1.7.2.5
> > >
> >
>
>
--
Asias
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon
2013-03-29 1:08 ` [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon Nicholas A. Bellinger
@ 2013-04-08 21:59 ` Anthony Liguori
2013-04-09 4:08 ` Nicholas A. Bellinger
2013-04-09 7:14 ` Paolo Bonzini
0 siblings, 2 replies; 9+ messages in thread
From: Anthony Liguori @ 2013-04-08 21:59 UTC (permalink / raw)
To: Nicholas A. Bellinger, target-devel
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, lf-virt,
Anthony Liguori, Stefan Hajnoczi, Paolo Bonzini, Asias He
"Nicholas A. Bellinger" <nab@linux-iscsi.org> writes:
> From: Paolo Bonzini <pbonzini@redhat.com>
>
> This patch refactors existing virtio-scsi code into VirtIOSCSICommon
> in order to allow virtio_scsi_init_common() to be used by both internal
> virtio_scsi_init() and external vhost-scsi-pci code.
>
> Changes in Patch-v2:
> - Move ->get_features() assignment to virtio_scsi_init() instead of
> virtio_scsi_init_common()
Any reason we're not doing this as a QOM base class?
Similiar to how the in-kernel PIT/PIC work using a common base class...
Regards,
Anthony Liguori
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Asias He <asias@redhat.com>
> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
> ---
> hw/virtio-scsi.c | 192 +++++++++++++-------------------------------------
> hw/virtio-scsi.h | 130 ++++++++++++++++++++++++++++++++--
> include/qemu/osdep.h | 4 +
> 3 files changed, 178 insertions(+), 148 deletions(-)
>
> diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c
> index 8620712..c59e9c6 100644
> --- a/hw/virtio-scsi.c
> +++ b/hw/virtio-scsi.c
> @@ -18,118 +18,6 @@
> #include <hw/scsi.h>
> #include <hw/scsi-defs.h>
>
> -#define VIRTIO_SCSI_VQ_SIZE 128
> -#define VIRTIO_SCSI_CDB_SIZE 32
> -#define VIRTIO_SCSI_SENSE_SIZE 96
> -#define VIRTIO_SCSI_MAX_CHANNEL 0
> -#define VIRTIO_SCSI_MAX_TARGET 255
> -#define VIRTIO_SCSI_MAX_LUN 16383
> -
> -/* Response codes */
> -#define VIRTIO_SCSI_S_OK 0
> -#define VIRTIO_SCSI_S_OVERRUN 1
> -#define VIRTIO_SCSI_S_ABORTED 2
> -#define VIRTIO_SCSI_S_BAD_TARGET 3
> -#define VIRTIO_SCSI_S_RESET 4
> -#define VIRTIO_SCSI_S_BUSY 5
> -#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
> -#define VIRTIO_SCSI_S_TARGET_FAILURE 7
> -#define VIRTIO_SCSI_S_NEXUS_FAILURE 8
> -#define VIRTIO_SCSI_S_FAILURE 9
> -#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10
> -#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11
> -#define VIRTIO_SCSI_S_INCORRECT_LUN 12
> -
> -/* Controlq type codes. */
> -#define VIRTIO_SCSI_T_TMF 0
> -#define VIRTIO_SCSI_T_AN_QUERY 1
> -#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2
> -
> -/* Valid TMF subtypes. */
> -#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0
> -#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1
> -#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2
> -#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3
> -#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4
> -#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5
> -#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6
> -#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7
> -
> -/* Events. */
> -#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000
> -#define VIRTIO_SCSI_T_NO_EVENT 0
> -#define VIRTIO_SCSI_T_TRANSPORT_RESET 1
> -#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
> -#define VIRTIO_SCSI_T_PARAM_CHANGE 3
> -
> -/* Reasons for transport reset event */
> -#define VIRTIO_SCSI_EVT_RESET_HARD 0
> -#define VIRTIO_SCSI_EVT_RESET_RESCAN 1
> -#define VIRTIO_SCSI_EVT_RESET_REMOVED 2
> -
> -/* SCSI command request, followed by data-out */
> -typedef struct {
> - uint8_t lun[8]; /* Logical Unit Number */
> - uint64_t tag; /* Command identifier */
> - uint8_t task_attr; /* Task attribute */
> - uint8_t prio;
> - uint8_t crn;
> - uint8_t cdb[];
> -} QEMU_PACKED VirtIOSCSICmdReq;
> -
> -/* Response, followed by sense data and data-in */
> -typedef struct {
> - uint32_t sense_len; /* Sense data length */
> - uint32_t resid; /* Residual bytes in data buffer */
> - uint16_t status_qualifier; /* Status qualifier */
> - uint8_t status; /* Command completion status */
> - uint8_t response; /* Response values */
> - uint8_t sense[];
> -} QEMU_PACKED VirtIOSCSICmdResp;
> -
> -/* Task Management Request */
> -typedef struct {
> - uint32_t type;
> - uint32_t subtype;
> - uint8_t lun[8];
> - uint64_t tag;
> -} QEMU_PACKED VirtIOSCSICtrlTMFReq;
> -
> -typedef struct {
> - uint8_t response;
> -} QEMU_PACKED VirtIOSCSICtrlTMFResp;
> -
> -/* Asynchronous notification query/subscription */
> -typedef struct {
> - uint32_t type;
> - uint8_t lun[8];
> - uint32_t event_requested;
> -} QEMU_PACKED VirtIOSCSICtrlANReq;
> -
> -typedef struct {
> - uint32_t event_actual;
> - uint8_t response;
> -} QEMU_PACKED VirtIOSCSICtrlANResp;
> -
> -typedef struct {
> - uint32_t event;
> - uint8_t lun[8];
> - uint32_t reason;
> -} QEMU_PACKED VirtIOSCSIEvent;
> -
> -typedef struct {
> - uint32_t num_queues;
> - uint32_t seg_max;
> - uint32_t max_sectors;
> - uint32_t cmd_per_lun;
> - uint32_t event_info_size;
> - uint32_t sense_size;
> - uint32_t cdb_size;
> - uint16_t max_channel;
> - uint16_t max_target;
> - uint32_t max_lun;
> -} QEMU_PACKED VirtIOSCSIConfig;
> -
> typedef struct VirtIOSCSIReq {
> VirtIOSCSI *dev;
> VirtQueue *vq;
> @@ -178,7 +66,7 @@ static void virtio_scsi_complete_req(VirtIOSCSIReq *req)
> scsi_req_unref(req->sreq);
> }
> g_free(req);
> - virtio_notify(&s->vdev, vq);
> + virtio_notify(&s->vs.vdev, vq);
> }
>
> static void virtio_scsi_bad_req(void)
> @@ -237,7 +125,7 @@ static void virtio_scsi_save_request(QEMUFile *f, SCSIRequest *sreq)
> VirtIOSCSIReq *req = sreq->hba_private;
> uint32_t n = virtio_queue_get_id(req->vq) - 2;
>
> - assert(n < req->dev->conf->num_queues);
> + assert(n < req->dev->vs.conf->num_queues);
> qemu_put_be32s(f, &n);
> qemu_put_buffer(f, (unsigned char *)&req->elem, sizeof(req->elem));
> }
> @@ -251,9 +139,9 @@ static void *virtio_scsi_load_request(QEMUFile *f, SCSIRequest *sreq)
>
> req = g_malloc(sizeof(*req));
> qemu_get_be32s(f, &n);
> - assert(n < s->conf->num_queues);
> + assert(n < s->vs.conf->num_queues);
> qemu_get_buffer(f, (unsigned char *)&req->elem, sizeof(req->elem));
> - virtio_scsi_parse_req(s, s->cmd_vqs[n], req);
> + virtio_scsi_parse_req(s, s->vs.cmd_vqs[n], req);
>
> scsi_req_ref(sreq);
> req->sreq = sreq;
> @@ -468,8 +356,8 @@ static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
>
> out_size = req->elem.out_sg[0].iov_len;
> in_size = req->elem.in_sg[0].iov_len;
> - if (out_size < sizeof(VirtIOSCSICmdReq) + s->cdb_size ||
> - in_size < sizeof(VirtIOSCSICmdResp) + s->sense_size) {
> + if (out_size < sizeof(VirtIOSCSICmdReq) + s->vs.cdb_size ||
> + in_size < sizeof(VirtIOSCSICmdResp) + s->vs.sense_size) {
> virtio_scsi_bad_req();
> }
>
> @@ -511,7 +399,7 @@ static void virtio_scsi_get_config(VirtIODevice *vdev,
> uint8_t *config)
> {
> VirtIOSCSIConfig *scsiconf = (VirtIOSCSIConfig *)config;
> - VirtIOSCSI *s = (VirtIOSCSI *)vdev;
> + VirtIOSCSICommon *s = (VirtIOSCSICommon *)vdev;
>
> stl_raw(&scsiconf->num_queues, s->conf->num_queues);
> stl_raw(&scsiconf->seg_max, 128 - 2);
> @@ -537,8 +425,8 @@ static void virtio_scsi_set_config(VirtIODevice *vdev,
> exit(1);
> }
>
> - s->sense_size = ldl_raw(&scsiconf->sense_size);
> - s->cdb_size = ldl_raw(&scsiconf->cdb_size);
> + s->vs.sense_size = ldl_raw(&scsiconf->sense_size);
> + s->vs.cdb_size = ldl_raw(&scsiconf->cdb_size);
> }
>
> static uint32_t virtio_scsi_get_features(VirtIODevice *vdev,
> @@ -555,8 +443,8 @@ static void virtio_scsi_reset(VirtIODevice *vdev)
> qbus_reset_all(&s->bus.qbus);
> s->resetting--;
>
> - s->sense_size = VIRTIO_SCSI_SENSE_SIZE;
> - s->cdb_size = VIRTIO_SCSI_CDB_SIZE;
> + s->vs.sense_size = VIRTIO_SCSI_SENSE_SIZE;
> + s->vs.cdb_size = VIRTIO_SCSI_CDB_SIZE;
> s->events_dropped = false;
> }
>
> @@ -566,7 +454,7 @@ static void virtio_scsi_reset(VirtIODevice *vdev)
> static void virtio_scsi_save(QEMUFile *f, void *opaque)
> {
> VirtIOSCSI *s = opaque;
> - virtio_save(&s->vdev, f);
> + virtio_save(&s->vs.vdev, f);
> }
>
> static int virtio_scsi_load(QEMUFile *f, void *opaque, int version_id)
> @@ -574,7 +462,7 @@ static int virtio_scsi_load(QEMUFile *f, void *opaque, int version_id)
> VirtIOSCSI *s = opaque;
> int ret;
>
> - ret = virtio_load(&s->vdev, f);
> + ret = virtio_load(&s->vs.vdev, f);
> if (ret) {
> return ret;
> }
> @@ -584,11 +472,11 @@ static int virtio_scsi_load(QEMUFile *f, void *opaque, int version_id)
> static void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
> uint32_t event, uint32_t reason)
> {
> - VirtIOSCSIReq *req = virtio_scsi_pop_req(s, s->event_vq);
> + VirtIOSCSIReq *req = virtio_scsi_pop_req(s, s->vs.event_vq);
> VirtIOSCSIEvent *evt;
> int in_size;
>
> - if (!(s->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK)) {
> + if (!(s->vs.vdev.status & VIRTIO_CONFIG_S_DRIVER_OK)) {
> return;
> }
>
> @@ -643,7 +531,7 @@ static void virtio_scsi_change(SCSIBus *bus, SCSIDevice *dev, SCSISense sense)
> {
> VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
>
> - if (((s->vdev.guest_features >> VIRTIO_SCSI_F_CHANGE) & 1) &&
> + if (((s->vs.vdev.guest_features >> VIRTIO_SCSI_F_CHANGE) & 1) &&
> dev->type != TYPE_ROM) {
> virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_PARAM_CHANGE,
> sense.asc | (sense.ascq << 8));
> @@ -654,7 +542,7 @@ static void virtio_scsi_hotplug(SCSIBus *bus, SCSIDevice *dev)
> {
> VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
>
> - if ((s->vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
> + if ((s->vs.vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
> virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_TRANSPORT_RESET,
> VIRTIO_SCSI_EVT_RESET_RESCAN);
> }
> @@ -664,7 +552,7 @@ static void virtio_scsi_hot_unplug(SCSIBus *bus, SCSIDevice *dev)
> {
> VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
>
> - if ((s->vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
> + if ((s->vs.vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
> virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_TRANSPORT_RESET,
> VIRTIO_SCSI_EVT_RESET_REMOVED);
> }
> @@ -686,35 +574,53 @@ static struct SCSIBusInfo virtio_scsi_scsi_info = {
> .load_request = virtio_scsi_load_request,
> };
>
> -VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf)
> +VirtIOSCSICommon *virtio_scsi_init_common(DeviceState *dev, VirtIOSCSIConf *proxyconf,
> + size_t sz)
> {
> - VirtIOSCSI *s;
> - static int virtio_scsi_id;
> - size_t sz;
> + VirtIOSCSICommon *s;
> int i;
>
> - sz = sizeof(VirtIOSCSI) + proxyconf->num_queues * sizeof(VirtQueue *);
> - s = (VirtIOSCSI *)virtio_common_init("virtio-scsi", VIRTIO_ID_SCSI,
> - sizeof(VirtIOSCSIConfig), sz);
> + /* Place the cmd_vqs array at the end of the block that the caller
> + * requested. Align the array properly, just in case.
> + */
> + sz = ROUND_UP(sz, sizeof(void *));
> + s = (VirtIOSCSICommon *)
> + virtio_common_init("virtio-scsi", VIRTIO_ID_SCSI,
> + sizeof(VirtIOSCSIConfig),
> + sz + sizeof(VirtQueue *) * proxyconf->num_queues);
>
> s->qdev = dev;
> s->conf = proxyconf;
> + s->sense_size = VIRTIO_SCSI_SENSE_SIZE;
> + s->cdb_size = VIRTIO_SCSI_CDB_SIZE;
>
> - /* TODO set up vdev function pointers */
> s->vdev.get_config = virtio_scsi_get_config;
> - s->vdev.set_config = virtio_scsi_set_config;
> - s->vdev.get_features = virtio_scsi_get_features;
> - s->vdev.reset = virtio_scsi_reset;
>
> s->ctrl_vq = virtio_add_queue(&s->vdev, VIRTIO_SCSI_VQ_SIZE,
> virtio_scsi_handle_ctrl);
> s->event_vq = virtio_add_queue(&s->vdev, VIRTIO_SCSI_VQ_SIZE,
> virtio_scsi_handle_event);
> +
> + s->cmd_vqs = (VirtQueue **) ((char *)s + sz);
> for (i = 0; i < s->conf->num_queues; i++) {
> s->cmd_vqs[i] = virtio_add_queue(&s->vdev, VIRTIO_SCSI_VQ_SIZE,
> virtio_scsi_handle_cmd);
> }
>
> + return s;
> +}
> +
> +VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf)
> +{
> + VirtIOSCSI *s;
> + static int virtio_scsi_id;
> +
> + s = (VirtIOSCSI *)virtio_scsi_init_common(dev, proxyconf, sizeof(VirtIOSCSI));
> +
> + s->vs.vdev.get_features = virtio_scsi_get_features;
> + s->vs.vdev.set_config = virtio_scsi_set_config;
> + s->vs.vdev.reset = virtio_scsi_reset;
> +
> scsi_bus_new(&s->bus, dev, &virtio_scsi_scsi_info);
> if (!dev->hotplugged) {
> scsi_bus_legacy_handle_cmdline(&s->bus);
> @@ -723,12 +629,12 @@ VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf)
> register_savevm(dev, "virtio-scsi", virtio_scsi_id++, 1,
> virtio_scsi_save, virtio_scsi_load, s);
>
> - return &s->vdev;
> + return &s->vs.vdev;
> }
>
> void virtio_scsi_exit(VirtIODevice *vdev)
> {
> VirtIOSCSI *s = (VirtIOSCSI *)vdev;
> - unregister_savevm(s->qdev, "virtio-scsi", s);
> + unregister_savevm(s->vs.qdev, "virtio-scsi", s);
> virtio_cleanup(vdev);
> }
> diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h
> index ccf1e42..2bcf606 100644
> --- a/hw/virtio-scsi.h
> +++ b/hw/virtio-scsi.h
> @@ -26,25 +26,142 @@
> #define VIRTIO_SCSI_F_HOTPLUG 1
> #define VIRTIO_SCSI_F_CHANGE 2
>
> +#define VIRTIO_SCSI_VQ_SIZE 128
> +#define VIRTIO_SCSI_CDB_SIZE 32
> +#define VIRTIO_SCSI_SENSE_SIZE 96
> +#define VIRTIO_SCSI_MAX_CHANNEL 0
> +#define VIRTIO_SCSI_MAX_TARGET 255
> +#define VIRTIO_SCSI_MAX_LUN 16383
> +
> +/* Response codes */
> +#define VIRTIO_SCSI_S_OK 0
> +#define VIRTIO_SCSI_S_OVERRUN 1
> +#define VIRTIO_SCSI_S_ABORTED 2
> +#define VIRTIO_SCSI_S_BAD_TARGET 3
> +#define VIRTIO_SCSI_S_RESET 4
> +#define VIRTIO_SCSI_S_BUSY 5
> +#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
> +#define VIRTIO_SCSI_S_TARGET_FAILURE 7
> +#define VIRTIO_SCSI_S_NEXUS_FAILURE 8
> +#define VIRTIO_SCSI_S_FAILURE 9
> +#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10
> +#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11
> +#define VIRTIO_SCSI_S_INCORRECT_LUN 12
> +
> +/* Controlq type codes. */
> +#define VIRTIO_SCSI_T_TMF 0
> +#define VIRTIO_SCSI_T_AN_QUERY 1
> +#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2
> +
> +/* Valid TMF subtypes. */
> +#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0
> +#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1
> +#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2
> +#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3
> +#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4
> +#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5
> +#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6
> +#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7
> +
> +/* Events. */
> +#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000
> +#define VIRTIO_SCSI_T_NO_EVENT 0
> +#define VIRTIO_SCSI_T_TRANSPORT_RESET 1
> +#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
> +#define VIRTIO_SCSI_T_PARAM_CHANGE 3
> +
> +/* Reasons for transport reset event */
> +#define VIRTIO_SCSI_EVT_RESET_HARD 0
> +#define VIRTIO_SCSI_EVT_RESET_RESCAN 1
> +#define VIRTIO_SCSI_EVT_RESET_REMOVED 2
> +
> +/* SCSI command request, followed by data-out */
> +typedef struct {
> + uint8_t lun[8]; /* Logical Unit Number */
> + uint64_t tag; /* Command identifier */
> + uint8_t task_attr; /* Task attribute */
> + uint8_t prio;
> + uint8_t crn;
> + uint8_t cdb[];
> +} QEMU_PACKED VirtIOSCSICmdReq;
> +
> +/* Response, followed by sense data and data-in */
> +typedef struct {
> + uint32_t sense_len; /* Sense data length */
> + uint32_t resid; /* Residual bytes in data buffer */
> + uint16_t status_qualifier; /* Status qualifier */
> + uint8_t status; /* Command completion status */
> + uint8_t response; /* Response values */
> + uint8_t sense[];
> +} QEMU_PACKED VirtIOSCSICmdResp;
> +
> +/* Task Management Request */
> +typedef struct {
> + uint32_t type;
> + uint32_t subtype;
> + uint8_t lun[8];
> + uint64_t tag;
> +} QEMU_PACKED VirtIOSCSICtrlTMFReq;
> +
> +typedef struct {
> + uint8_t response;
> +} QEMU_PACKED VirtIOSCSICtrlTMFResp;
> +
> +/* Asynchronous notification query/subscription */
> +typedef struct {
> + uint32_t type;
> + uint8_t lun[8];
> + uint32_t event_requested;
> +} QEMU_PACKED VirtIOSCSICtrlANReq;
> +
> +typedef struct {
> + uint32_t event_actual;
> + uint8_t response;
> +} QEMU_PACKED VirtIOSCSICtrlANResp;
> +
> +typedef struct {
> + uint32_t event;
> + uint8_t lun[8];
> + uint32_t reason;
> +} QEMU_PACKED VirtIOSCSIEvent;
> +
> +typedef struct {
> + uint32_t num_queues;
> + uint32_t seg_max;
> + uint32_t max_sectors;
> + uint32_t cmd_per_lun;
> + uint32_t event_info_size;
> + uint32_t sense_size;
> + uint32_t cdb_size;
> + uint16_t max_channel;
> + uint16_t max_target;
> + uint32_t max_lun;
> +} QEMU_PACKED VirtIOSCSIConfig;
> +
> struct VirtIOSCSIConf {
> uint32_t num_queues;
> uint32_t max_sectors;
> uint32_t cmd_per_lun;
> };
>
> -typedef struct VirtIOSCSI {
> +typedef struct VirtIOSCSICommon {
> VirtIODevice vdev;
> DeviceState *qdev;
> VirtIOSCSIConf *conf;
>
> - SCSIBus bus;
> uint32_t sense_size;
> uint32_t cdb_size;
> - int resetting;
> - bool events_dropped;
> VirtQueue *ctrl_vq;
> VirtQueue *event_vq;
> - VirtQueue *cmd_vqs[0];
> + VirtQueue **cmd_vqs;
> +} VirtIOSCSICommon;
> +
> +typedef struct {
> + VirtIOSCSICommon vs;
> +
> + SCSIBus bus;
> + int resetting;
> + bool events_dropped;
> } VirtIOSCSI;
>
> #define DEFINE_VIRTIO_SCSI_PROPERTIES(_state, _features_field, _conf_field) \
> @@ -55,4 +172,7 @@ typedef struct VirtIOSCSI {
> DEFINE_PROP_BIT("hotplug", _state, _features_field, VIRTIO_SCSI_F_HOTPLUG, true), \
> DEFINE_PROP_BIT("param_change", _state, _features_field, VIRTIO_SCSI_F_CHANGE, true)
>
> +VirtIOSCSICommon *virtio_scsi_init_common(DeviceState *dev, VirtIOSCSIConf *proxyconf,
> + size_t sz);
> +
> #endif /* _QEMU_VIRTIO_SCSI_H */
> diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h
> index df24400..8b465fd 100644
> --- a/include/qemu/osdep.h
> +++ b/include/qemu/osdep.h
> @@ -67,6 +67,10 @@ typedef signed int int_fast16_t;
> #define MAX(a, b) (((a) > (b)) ? (a) : (b))
> #endif
>
> +#ifndef ROUND_UP
> +#define ROUND_UP(n,d) (((n) + (d) - 1) & -(d))
> +#endif
> +
> #ifndef DIV_ROUND_UP
> #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
> #endif
> --
> 1.7.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon
2013-04-08 21:59 ` Anthony Liguori
@ 2013-04-09 4:08 ` Nicholas A. Bellinger
2013-04-09 7:14 ` Paolo Bonzini
1 sibling, 0 replies; 9+ messages in thread
From: Nicholas A. Bellinger @ 2013-04-09 4:08 UTC (permalink / raw)
To: Anthony Liguori
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, lf-virt,
Anthony Liguori, target-devel, Stefan Hajnoczi, Paolo Bonzini,
Asias He
On Mon, 2013-04-08 at 16:59 -0500, Anthony Liguori wrote:
> "Nicholas A. Bellinger" <nab@linux-iscsi.org> writes:
>
> > From: Paolo Bonzini <pbonzini@redhat.com>
> >
> > This patch refactors existing virtio-scsi code into VirtIOSCSICommon
> > in order to allow virtio_scsi_init_common() to be used by both internal
> > virtio_scsi_init() and external vhost-scsi-pci code.
> >
> > Changes in Patch-v2:
> > - Move ->get_features() assignment to virtio_scsi_init() instead of
> > virtio_scsi_init_common()
>
>
> Any reason we're not doing this as a QOM base class?
>
> Similiar to how the in-kernel PIT/PIC work using a common base class...
>
Mmm, not sure. Paolo, what do you prefer here..?
Also, has your qemu/scsi-next branch with this series been pushed to a
public tree yet..? ;)
--nab
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon
2013-04-08 21:59 ` Anthony Liguori
2013-04-09 4:08 ` Nicholas A. Bellinger
@ 2013-04-09 7:14 ` Paolo Bonzini
1 sibling, 0 replies; 9+ messages in thread
From: Paolo Bonzini @ 2013-04-09 7:14 UTC (permalink / raw)
To: Anthony Liguori
Cc: kvm-devel, Michael S. Tsirkin, qemu-devel, Nicholas A. Bellinger,
lf-virt, Anthony Liguori, target-devel, Stefan Hajnoczi, Asias He
Il 08/04/2013 23:59, Anthony Liguori ha scritto:
> > This patch refactors existing virtio-scsi code into VirtIOSCSICommon
> > in order to allow virtio_scsi_init_common() to be used by both internal
> > virtio_scsi_init() and external vhost-scsi-pci code.
> >
> > Changes in Patch-v2:
> > - Move ->get_features() assignment to virtio_scsi_init() instead of
> > virtio_scsi_init_common()
>
> Any reason we're not doing this as a QOM base class?
>
> Similiar to how the in-kernel PIT/PIC work using a common base class...
Because when the patch was written virtio-scsi was not a QOM class.
Paolo
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-04-09 7:15 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-29 1:08 [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci Nicholas A. Bellinger
2013-03-29 1:08 ` [Qemu-devel] [PATCH-v2 1/2] virtio-scsi: create VirtIOSCSICommon Nicholas A. Bellinger
2013-04-08 21:59 ` Anthony Liguori
2013-04-09 4:08 ` Nicholas A. Bellinger
2013-04-09 7:14 ` Paolo Bonzini
2013-03-29 1:08 ` [Qemu-devel] [PATCH-v2 2/2] vhost-scsi: new device supporting the tcm_vhost Linux kernel module Nicholas A. Bellinger
2013-03-29 6:39 ` [Qemu-devel] [PATCH-v2 0/2] Add support for vhost-scsi-pci Asias He
2013-03-29 6:48 ` Nicholas A. Bellinger
2013-03-29 6:55 ` Asias He
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).