From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: aurelien@aurel32.net, pmaydell@linaro.org
Subject: [Qemu-devel] [PATCH v2 06/10] elfload: only give abi_long/ulong the alignment specified by the target
Date: Wed, 3 Apr 2013 12:32:04 +0200 [thread overview]
Message-ID: <1364985128-23772-7-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1364985128-23772-1-git-send-email-pbonzini@redhat.com>
Previously, this was done for target_long/ulong, and propagated to
abi_long/ulong via a typedef. But target_long/ulong should not
have any specific alignment, it is never used to access guest
memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
configure | 9 ---------
include/exec/cpu-defs.h | 8 ++++----
include/exec/user/abitypes.h | 19 +++++++++++++------
target-m68k/cpu.h | 1 +
4 files changed, 18 insertions(+), 19 deletions(-)
diff --git a/configure b/configure
index 8276e79..0763047 100755
--- a/configure
+++ b/configure
@@ -4011,7 +4011,6 @@ bflt="no"
target_nptl="no"
interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"`
gdb_xml_files=""
-target_long_alignment=4
target_llong_alignment=8
target_libs_softmmu=
@@ -4024,10 +4023,8 @@ case "$target_arch2" in
;;
x86_64)
TARGET_BASE_ARCH=i386
- target_long_alignment=8
;;
alpha)
- target_long_alignment=8
target_nptl="yes"
;;
arm|armeb)
@@ -4046,7 +4043,6 @@ case "$target_arch2" in
m68k)
bflt="yes"
gdb_xml_files="cf-core.xml cf-fp.xml"
- target_long_alignment=2
target_llong_alignment=2
;;
microblaze|microblazeel)
@@ -4069,7 +4065,6 @@ case "$target_arch2" in
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
- target_long_alignment=8
;;
moxie)
;;
@@ -4091,7 +4086,6 @@ case "$target_arch2" in
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_long_alignment=8
;;
ppc64abi32)
TARGET_ARCH=ppc64
@@ -4109,7 +4103,6 @@ case "$target_arch2" in
;;
sparc64)
TARGET_BASE_ARCH=sparc
- target_long_alignment=8
;;
sparc32plus)
TARGET_ARCH=sparc64
@@ -4119,7 +4112,6 @@ case "$target_arch2" in
;;
s390x)
target_nptl="yes"
- target_long_alignment=8
;;
unicore32)
;;
@@ -4151,7 +4143,6 @@ case "$cpu" in
;;
esac
-echo "TARGET_LONG_ALIGNMENT=$target_long_alignment" >> $config_target_mak
echo "TARGET_LLONG_ALIGNMENT=$target_llong_alignment" >> $config_target_mak
echo "TARGET_ARCH=$TARGET_ARCH" >> $config_target_mak
target_arch_name="`upper $TARGET_ARCH`"
diff --git a/include/exec/cpu-defs.h b/include/exec/cpu-defs.h
index 2aa9331..3cf1272 100644
--- a/include/exec/cpu-defs.h
+++ b/include/exec/cpu-defs.h
@@ -40,14 +40,14 @@ typedef int64_t target_llong __attribute__((aligned(TARGET_LLONG_ALIGNMENT)));
typedef uint64_t target_ullong __attribute__((aligned(TARGET_LLONG_ALIGNMENT)));
/* target_ulong is the type of a virtual address */
#if TARGET_LONG_SIZE == 4
-typedef int32_t target_long __attribute__((aligned(TARGET_LONG_ALIGNMENT)));
-typedef uint32_t target_ulong __attribute__((aligned(TARGET_LONG_ALIGNMENT)));
+typedef int32_t target_long;
+typedef uint32_t target_ulong;
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#elif TARGET_LONG_SIZE == 8
-typedef int64_t target_long __attribute__((aligned(TARGET_LONG_ALIGNMENT)));
-typedef uint64_t target_ulong __attribute__((aligned(TARGET_LONG_ALIGNMENT)));
+typedef int64_t target_long;
+typedef uint64_t target_ulong;
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
diff --git a/include/exec/user/abitypes.h b/include/exec/user/abitypes.h
index 97a87a6..9bf916a 100644
--- a/include/exec/user/abitypes.h
+++ b/include/exec/user/abitypes.h
@@ -2,12 +2,21 @@
#define QEMU_TYPES_H
#include "cpu.h"
+#ifdef TARGET_ABI32
+#define TARGET_ABI_BITS 32
+#else
+#define TARGET_ABI_BITS TARGET_LONG_BITS
+#endif
+
#ifndef ABI_SHORT_ALIGNMENT
#define ABI_SHORT_ALIGNMENT 2
#endif
#ifndef ABI_INT_ALIGNMENT
#define ABI_INT_ALIGNMENT 4
#endif
+#ifndef ABI_LONG_ALIGNMENT
+#define ABI_LONG_ALIGNMENT (TARGET_ABI_BITS / 8)
+#endif
typedef int16_t abi_short __attribute__ ((aligned(ABI_SHORT_ALIGNMENT)));
typedef uint16_t abi_ushort __attribute__((aligned(ABI_SHORT_ALIGNMENT)));
@@ -15,12 +24,11 @@ typedef int32_t abi_int __attribute__((aligned(ABI_INT_ALIGNMENT)));
typedef uint32_t abi_uint __attribute__((aligned(ABI_INT_ALIGNMENT)));
#ifdef TARGET_ABI32
-typedef uint32_t abi_ulong;
-typedef int32_t abi_long;
+typedef uint32_t abi_ulong __attribute__((aligned(ABI_LONG_ALIGNMENT)));
+typedef int32_t abi_long __attribute__((aligned(ABI_LONG_ALIGNMENT)));
#define TARGET_ABI_FMT_lx "%08x"
#define TARGET_ABI_FMT_ld "%d"
#define TARGET_ABI_FMT_lu "%u"
-#define TARGET_ABI_BITS 32
static inline abi_ulong tswapal(abi_ulong v)
{
@@ -28,12 +36,11 @@ static inline abi_ulong tswapal(abi_ulong v)
}
#else
-typedef target_ulong abi_ulong;
-typedef target_long abi_long;
+typedef target_ulong abi_ulong __attribute__((aligned(ABI_LONG_ALIGNMENT)));
+typedef target_long abi_long __attribute__((aligned(ABI_LONG_ALIGNMENT)));
#define TARGET_ABI_FMT_lx TARGET_FMT_lx
#define TARGET_ABI_FMT_ld TARGET_FMT_ld
#define TARGET_ABI_FMT_lu TARGET_FMT_lu
-#define TARGET_ABI_BITS TARGET_LONG_BITS
/* for consistency, define ABI32 too */
#if TARGET_ABI_BITS == 32
#define TARGET_ABI32 1
diff --git a/target-m68k/cpu.h b/target-m68k/cpu.h
index 29cc887..6825e7c 100644
--- a/target-m68k/cpu.h
+++ b/target-m68k/cpu.h
@@ -22,6 +22,7 @@
#define TARGET_LONG_BITS 32
#define ABI_INT_ALIGNMENT 2
+#define ABI_LONG_ALIGNMENT 2
#define CPUArchState struct CPUM68KState
--
1.8.1.4
next prev parent reply other threads:[~2013-04-03 10:32 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-03 10:31 [Qemu-devel] [PATCH v2 00/10] TARGET_*_ALIGNMENT cleanup, and config-target.mak trimming Paolo Bonzini
2013-04-03 10:31 ` [Qemu-devel] [PATCH v2 01/10] elfload: fix size of ABI-dependent fields in core dumps Paolo Bonzini
2013-04-04 13:51 ` Peter Maydell
2013-04-03 10:32 ` [Qemu-devel] [PATCH v2 02/10] elfload: fix size of registers for N32 Paolo Bonzini
2013-04-04 15:32 ` Peter Maydell
2013-04-04 15:41 ` Paolo Bonzini
2013-04-04 15:46 ` Peter Maydell
2013-04-04 16:00 ` Paolo Bonzini
2013-04-03 10:32 ` [Qemu-devel] [PATCH v2 03/10] elfload: use tswapreg consistently in elf_core_copy_regs Paolo Bonzini
2013-04-04 15:33 ` Peter Maydell
2013-04-03 10:32 ` [Qemu-devel] [PATCH v2 04/10] elfload: use abi_short/ushort instead of target_short/ushort Paolo Bonzini
2013-04-04 13:52 ` Peter Maydell
2013-04-03 10:32 ` [Qemu-devel] [PATCH v2 05/10] elfload: use abi_int/uint instead of target_int/uint Paolo Bonzini
2013-04-04 13:56 ` Peter Maydell
2013-04-04 14:04 ` Paolo Bonzini
2013-04-04 14:22 ` Peter Maydell
2013-04-04 14:28 ` Paolo Bonzini
2013-04-03 10:32 ` Paolo Bonzini [this message]
2013-04-04 14:09 ` [Qemu-devel] [PATCH v2 06/10] elfload: only give abi_long/ulong the alignment specified by the target Peter Maydell
2013-04-04 14:11 ` Paolo Bonzini
2013-04-04 14:18 ` Peter Maydell
2013-04-04 14:26 ` Paolo Bonzini
2013-04-04 14:37 ` Peter Maydell
2013-04-04 14:45 ` Paolo Bonzini
2013-04-04 14:50 ` Peter Maydell
2013-04-03 10:32 ` [Qemu-devel] [PATCH v2 07/10] elfload: use abi_llong/ullong instead of target_llong/ullong Paolo Bonzini
2013-04-03 10:32 ` [Qemu-devel] [PATCH v2 08/10] configure: move CONFIG_QEMU_LDST_OPTIMIZATION to config-host.mak Paolo Bonzini
2013-04-03 10:32 ` [Qemu-devel] [PATCH v2 09/10] configure: move common libraries " Paolo Bonzini
2013-04-04 13:40 ` Peter Maydell
2013-04-03 10:32 ` [Qemu-devel] [PATCH v2 10/10] configure: CONFIG_NO_XEN is duplicated Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364985128-23772-7-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=aurelien@aurel32.net \
--cc=pmaydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).