From: Laszlo Ersek <lersek@redhat.com>
To: aliguori@us.ibm.com, qemu-devel@nongnu.org, seabios@seabios.org
Subject: [Qemu-devel] [qemu PATCH 2/5] hw/acpi: extract standard table headers as a standalone structure
Date: Mon, 8 Apr 2013 15:13:20 +0200 [thread overview]
Message-ID: <1365426803-1781-3-git-send-email-lersek@redhat.com> (raw)
In-Reply-To: <1365426803-1781-1-git-send-email-lersek@redhat.com>
This enables reuse when preparing per-table fw_cfg blobs later.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
hw/acpi.h | 11 +++++++++++
hw/acpi.c | 48 +++++++++++++++++++++---------------------------
2 files changed, 32 insertions(+), 27 deletions(-)
diff --git a/hw/acpi.h b/hw/acpi.h
index e18ef28..d69b6ef 100644
--- a/hw/acpi.h
+++ b/hw/acpi.h
@@ -154,4 +154,15 @@ void acpi_gpe_reset(ACPIREGS *ar);
void acpi_gpe_ioport_writeb(ACPIREGS *ar, uint32_t addr, uint32_t val);
uint32_t acpi_gpe_ioport_readb(ACPIREGS *ar, uint32_t addr);
+typedef struct acpi_table_std_header {
+ char sig[4]; /* ACPI signature (4 ASCII characters) */
+ uint32_t length; /* Length of table, in bytes, including header */
+ uint8_t revision; /* ACPI Specification minor version # */
+ uint8_t checksum; /* To make sum of entire table == 0 */
+ char oem_id[6]; /* OEM identification */
+ char oem_table_id[8]; /* OEM table identification */
+ uint32_t oem_revision; /* OEM revision number */
+ char asl_compiler_id[4]; /* ASL compiler vendor ID */
+ uint32_t asl_compiler_revision; /* ASL compiler revision number */
+} QEMU_PACKED AcpiTableStdHdr;
#endif /* !QEMU_HW_ACPI_H */
diff --git a/hw/acpi.c b/hw/acpi.c
index 856da81..73af4bd 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -31,21 +31,13 @@
struct acpi_table_header {
uint16_t _length; /* our length, not actual part of the hdr */
/* allows easier parsing for fw_cfg clients */
- char sig[4]; /* ACPI signature (4 ASCII characters) */
- uint32_t length; /* Length of table, in bytes, including header */
- uint8_t revision; /* ACPI Specification minor version # */
- uint8_t checksum; /* To make sum of entire table == 0 */
- char oem_id[6]; /* OEM identification */
- char oem_table_id[8]; /* OEM table identification */
- uint32_t oem_revision; /* OEM revision number */
- char asl_compiler_id[4]; /* ASL compiler vendor ID */
- uint32_t asl_compiler_revision; /* ASL compiler revision number */
+ AcpiTableStdHdr std;
} QEMU_PACKED;
-#define ACPI_TABLE_HDR_SIZE sizeof(struct acpi_table_header)
-#define ACPI_TABLE_PFX_SIZE sizeof(uint16_t) /* size of the extra prefix */
+/* size of the extra prefix */
+#define ACPI_TABLE_PFX_SIZE offsetof(struct acpi_table_header, std)
-static const char unsigned dfl_hdr[ACPI_TABLE_HDR_SIZE - ACPI_TABLE_PFX_SIZE] =
+static const char unsigned dfl_hdr[sizeof(AcpiTableStdHdr)] =
"QEMU\0\0\0\0\1\0" /* sig (4), len(4), revno (1), csum (1) */
"QEMUQEQEMUQEMU\1\0\0\0" /* OEM id (6), table (8), revno (4) */
"QEMU\1\0\0\0" /* ASL compiler ID (4), version (4) */
@@ -105,6 +97,7 @@ static void acpi_table_install(const char unsigned *blob, size_t bloblen,
size_t body_size, acpi_payload_size;
struct acpi_table_header *ext_hdr;
unsigned changed_fields;
+ AcpiTableStdHdr *std;
/* Calculate where the ACPI table body starts within the blob, plus where
* to copy the ACPI table header from.
@@ -177,46 +170,47 @@ static void acpi_table_install(const char unsigned *blob, size_t bloblen,
changed_fields = 0;
ext_hdr->_length = cpu_to_le16(acpi_payload_size);
+ std = &ext_hdr->std;
if (hdrs->has_sig) {
- strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig);
+ strncpy(std->sig, hdrs->sig, sizeof std->sig);
++changed_fields;
}
- if (has_header && le32_to_cpu(ext_hdr->length) != acpi_payload_size) {
+ if (has_header && le32_to_cpu(std->length) != acpi_payload_size) {
fprintf(stderr,
"warning: ACPI table has wrong length, header says "
"%" PRIu32 ", actual size %zu bytes\n",
- le32_to_cpu(ext_hdr->length), acpi_payload_size);
+ le32_to_cpu(std->length), acpi_payload_size);
}
- ext_hdr->length = cpu_to_le32(acpi_payload_size);
+ std->length = cpu_to_le32(acpi_payload_size);
if (hdrs->has_rev) {
- ext_hdr->revision = hdrs->rev;
+ std->revision = hdrs->rev;
++changed_fields;
}
- ext_hdr->checksum = 0;
+ std->checksum = 0;
if (hdrs->has_oem_id) {
- strncpy(ext_hdr->oem_id, hdrs->oem_id, sizeof ext_hdr->oem_id);
+ strncpy(std->oem_id, hdrs->oem_id, sizeof std->oem_id);
++changed_fields;
}
if (hdrs->has_oem_table_id) {
- strncpy(ext_hdr->oem_table_id, hdrs->oem_table_id,
- sizeof ext_hdr->oem_table_id);
+ strncpy(std->oem_table_id, hdrs->oem_table_id,
+ sizeof std->oem_table_id);
++changed_fields;
}
if (hdrs->has_oem_rev) {
- ext_hdr->oem_revision = cpu_to_le32(hdrs->oem_rev);
+ std->oem_revision = cpu_to_le32(hdrs->oem_rev);
++changed_fields;
}
if (hdrs->has_asl_compiler_id) {
- strncpy(ext_hdr->asl_compiler_id, hdrs->asl_compiler_id,
- sizeof ext_hdr->asl_compiler_id);
+ strncpy(std->asl_compiler_id, hdrs->asl_compiler_id,
+ sizeof std->asl_compiler_id);
++changed_fields;
}
if (hdrs->has_asl_compiler_rev) {
- ext_hdr->asl_compiler_revision = cpu_to_le32(hdrs->asl_compiler_rev);
+ std->asl_compiler_revision = cpu_to_le32(hdrs->asl_compiler_rev);
++changed_fields;
}
@@ -225,8 +219,8 @@ static void acpi_table_install(const char unsigned *blob, size_t bloblen,
}
/* recalculate checksum */
- ext_hdr->checksum = acpi_checksum((const char unsigned *)ext_hdr +
- ACPI_TABLE_PFX_SIZE, acpi_payload_size);
+ std->checksum = acpi_checksum((const char unsigned *)std,
+ acpi_payload_size);
}
void acpi_table_add(const QemuOpts *opts, Error **errp)
--
1.7.1
next prev parent reply other threads:[~2013-04-08 13:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-08 13:13 [Qemu-devel] [qemu PATCH 0/5] publish etc/acpi/APIC in fw_cfg Laszlo Ersek
2013-04-08 13:13 ` [Qemu-devel] [qemu PATCH 1/5] refer to FWCfgState explicitly Laszlo Ersek
2013-04-08 13:13 ` Laszlo Ersek [this message]
2013-04-08 13:13 ` [Qemu-devel] [qemu PATCH 3/5] hw/acpi: export default ACPI headers using the type just introduced Laszlo Ersek
2013-04-08 13:13 ` [Qemu-devel] [qemu PATCH 4/5] hw/acpi: export acpi_checksum() Laszlo Ersek
2013-04-08 13:13 ` [Qemu-devel] [qemu PATCH 5/5] i386/pc: build ACPI MADT (APIC) for fw_cfg clients Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365426803-1781-3-git-send-email-lersek@redhat.com \
--to=lersek@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=seabios@seabios.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).