From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: aliguori@us.ibm.com, ehabkost@redhat.com, mst@redhat.com,
jan.kiszka@siemens.com, claudio.fontana@huawei.com,
aderumier@odiso.com, lcapitulino@redhat.com,
jfrei@linux.vnet.ibm.com, yang.z.zhang@intel.com,
pbonzini@redhat.com, afaerber@suse.de, lig.fnst@cn.fujitsu.com,
rth@twiddle.net
Subject: [Qemu-devel] [PATCH 09/16] acpi_piix4: add infrastructure to send CPU hot-plug GPE to guest
Date: Tue, 16 Apr 2013 00:12:49 +0200 [thread overview]
Message-ID: <1366063976-4909-10-git-send-email-imammedo@redhat.com> (raw)
In-Reply-To: <1366063976-4909-1-git-send-email-imammedo@redhat.com>
* introduce processor status bitmask visible to guest at 0xaf00 addr,
where ACPI asl code expects it
* set bit corresponding to APIC ID in processor status bitmask on
receiving CPU hot-plug notification
* trigger CPU hot-plug SCI, to notify guest about CPU hot-plug event
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
v3:
* s/get_firmware_id()/get_arch_id()/ due rebase
* s/cpu_add_notifier/cpu_added_notifier/
v2:
* use CPUClass.get_firmware_id() to make code target independent
* bump up vmstate_acpi version
---
hw/acpi/piix4.c | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 113 insertions(+), 3 deletions(-)
diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
index 88386d7..eecdbb0 100644
--- a/hw/acpi/piix4.c
+++ b/hw/acpi/piix4.c
@@ -48,19 +48,28 @@
#define PCI_EJ_BASE 0xae08
#define PCI_RMV_BASE 0xae0c
+#define PROC_BASE 0xaf00
+#define PROC_LEN 32
+
#define PIIX4_PCI_HOTPLUG_STATUS 2
+#define PIIX4_CPU_HOTPLUG_STATUS 4
struct pci_status {
uint32_t up; /* deprecated, maintained for migration compatibility */
uint32_t down;
};
+struct cpu_status {
+ uint8_t sts[PROC_LEN];
+};
+
typedef struct PIIX4PMState {
PCIDevice dev;
MemoryRegion io;
MemoryRegion io_gpe;
MemoryRegion io_pci;
+ MemoryRegion io_cpu;
ACPIREGS ar;
APMState apm;
@@ -82,6 +91,9 @@ typedef struct PIIX4PMState {
uint8_t disable_s3;
uint8_t disable_s4;
uint8_t s4_val;
+
+ struct cpu_status gpe_cpu;
+ Notifier cpu_added_notifier;
} PIIX4PMState;
static void piix4_acpi_system_hot_add_init(MemoryRegion *parent,
@@ -100,8 +112,8 @@ static void pm_update_sci(PIIX4PMState *s)
ACPI_BITMASK_POWER_BUTTON_ENABLE |
ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
- (((s->ar.gpe.sts[0] & s->ar.gpe.en[0])
- & PIIX4_PCI_HOTPLUG_STATUS) != 0);
+ (((s->ar.gpe.sts[0] & s->ar.gpe.en[0]) &
+ (PIIX4_PCI_HOTPLUG_STATUS | PIIX4_CPU_HOTPLUG_STATUS)) != 0);
qemu_set_irq(s->irq, sci_level);
/* schedule a timer interruption if needed */
@@ -257,6 +269,17 @@ static int acpi_load_old(QEMUFile *f, void *opaque, int version_id)
return ret;
}
+#define VMSTATE_CPU_STATUS_ARRAY(_field, _state) \
+ { \
+ .name = (stringify(_field)), \
+ .version_id = 0, \
+ .num = PROC_LEN, \
+ .info = &vmstate_info_uint8, \
+ .size = sizeof(uint8_t), \
+ .flags = VMS_ARRAY, \
+ .offset = vmstate_offset_array(_state, _field, uint8_t, PROC_LEN), \
+ }
+
/* qemu-kvm 1.2 uses version 3 but advertised as 2
* To support incoming qemu-kvm 1.2 migration, change version_id
* and minimum_version_id to 2 below (which breaks migration from
@@ -265,7 +288,7 @@ static int acpi_load_old(QEMUFile *f, void *opaque, int version_id)
*/
static const VMStateDescription vmstate_acpi = {
.name = "piix4_pm",
- .version_id = 3,
+ .version_id = 4,
.minimum_version_id = 3,
.minimum_version_id_old = 1,
.load_state_old = acpi_load_old,
@@ -281,6 +304,7 @@ static const VMStateDescription vmstate_acpi = {
VMSTATE_STRUCT(ar.gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE),
VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
struct pci_status),
+ VMSTATE_CPU_STATUS_ARRAY(gpe_cpu.sts, PIIX4PMState),
VMSTATE_END_OF_LIST()
}
};
@@ -585,6 +609,85 @@ static const MemoryRegionOps piix4_pci_ops = {
},
};
+static uint64_t cpu_status_read(void *opaque, hwaddr addr, unsigned width)
+{
+ PIIX4PMState *s = opaque;
+ struct cpu_status *cpus = &s->gpe_cpu;
+ uint64_t val = cpus->sts[addr];
+
+ return val;
+}
+
+static void cpu_status_write(void *opaque, hwaddr addr, uint64_t data,
+ unsigned int size)
+{
+ /* TODO: implement VCPU removal on guest signal that CPU can be removed */
+}
+
+static const MemoryRegionOps cpu_hotplug_ops = {
+ .read = cpu_status_read,
+ .write = cpu_status_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+typedef enum {
+ PLUG,
+ UNPLUG,
+} HotplugEventType;
+
+static void piix4_cpu_hotplug_req(PIIX4PMState *s, CPUState *cpu,
+ HotplugEventType action)
+{
+ struct cpu_status *g = &s->gpe_cpu;
+ ACPIGPE *gpe = &s->ar.gpe;
+ CPUClass *k = CPU_GET_CLASS(cpu);
+ int64_t cpu_id;
+
+ assert(s != NULL);
+
+ *gpe->sts = *gpe->sts | PIIX4_CPU_HOTPLUG_STATUS;
+ cpu_id = k->get_arch_id(CPU(cpu));
+ if (action == PLUG) {
+ g->sts[cpu_id / 8] |= (1 << (cpu_id % 8));
+ } else {
+ g->sts[cpu_id / 8] &= ~(1 << (cpu_id % 8));
+ }
+ pm_update_sci(s);
+}
+
+static void piix4_cpu_added_req(Notifier *n, void *opaque)
+{
+ PIIX4PMState *s = container_of(n, PIIX4PMState, cpu_added_notifier);
+
+ piix4_cpu_hotplug_req(s, CPU(opaque), PLUG);
+}
+
+static int piix4_init_cpu_status(Object *obj, void *opaque)
+{
+ struct cpu_status *g = (struct cpu_status *)opaque;
+ Object *cpu_obj = object_dynamic_cast(obj, TYPE_CPU);
+
+ if (cpu_obj) {
+ struct Error *error = NULL;
+ CPUClass *k = CPU_GET_CLASS(cpu_obj);
+ int64_t id = k->get_arch_id(CPU(cpu_obj));
+
+ if (error) {
+ fprintf(stderr, "failed to initilize CPU status for ACPI: %s\n",
+ error_get_pretty(error));
+ error_free(error);
+ abort();
+ }
+ g_assert((id / 8) < PROC_LEN);
+ g->sts[id / 8] |= (1 << (id % 8));
+ }
+ return object_child_foreach(obj, piix4_init_cpu_status, opaque);
+}
+
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
PCIHotplugState state);
@@ -600,6 +703,13 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent,
memory_region_add_subregion(parent, PCI_HOTPLUG_ADDR,
&s->io_pci);
pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
+
+ piix4_init_cpu_status(qdev_get_machine(), &s->gpe_cpu);
+ memory_region_init_io(&s->io_cpu, &cpu_hotplug_ops, s, "apci-cpu-hotplug",
+ PROC_LEN);
+ memory_region_add_subregion(parent, PROC_BASE, &s->io_cpu);
+ s->cpu_added_notifier.notify = piix4_cpu_added_req;
+ qemu_register_cpu_added_notifier(&s->cpu_added_notifier);
}
static void enable_device(PIIX4PMState *s, int slot)
--
1.8.2
next prev parent reply other threads:[~2013-04-15 22:13 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-15 22:12 [Qemu-devel] [PATCH 00/16 v4] target-i386: CPU hot-add with cpu-add QMP command Igor Mammedov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 01/16] cpu: make kvm-stub.o a part of CPU library Igor Mammedov
[not found] ` <20130417185844.GA11821@otherpad.lan.raisama.net>
2013-04-17 22:26 ` Paolo Bonzini
2013-04-18 4:23 ` [Qemu-devel] [PATCH 01/16 v2] " Igor Mammedov
2013-04-18 14:24 ` Eduardo Habkost
2013-04-22 13:45 ` Andreas Färber
2013-04-22 14:35 ` Paolo Bonzini
2013-04-22 16:29 ` Gleb Natapov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 02/16] cpu: call cpu_synchronize_post_init() from CPUClass.realize() if hotplugged Igor Mammedov
2013-04-18 17:03 ` Eduardo Habkost
2013-04-22 13:46 ` Andreas Färber
2013-04-22 16:30 ` Gleb Natapov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 03/16] introduce resume_vcpu(), for single CPU Igor Mammedov
2013-04-18 17:04 ` Eduardo Habkost
2013-04-22 10:40 ` Gleb Natapov
2013-04-22 10:54 ` Igor Mammedov
2013-04-22 10:59 ` Gleb Natapov
2013-04-22 11:45 ` Igor Mammedov
2013-04-22 12:34 ` Gleb Natapov
2013-04-22 13:42 ` Andreas Färber
2013-04-22 14:50 ` Igor Mammedov
2013-04-22 14:59 ` Andreas Färber
2013-04-15 22:12 ` [Qemu-devel] [PATCH 04/16] cpu: resume CPU from CPUClass.cpu_common_realizefn() when it is hot-plugged Igor Mammedov
2013-04-18 17:04 ` Eduardo Habkost
2013-04-15 22:12 ` [Qemu-devel] [PATCH 05/16] introduce CPU hot-plug notifier Igor Mammedov
2013-04-22 11:00 ` Gleb Natapov
2013-04-22 11:09 ` Igor Mammedov
2013-04-22 11:24 ` Gleb Natapov
2013-04-22 20:01 ` Igor Mammedov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 06/16] target-i386: pc: update rtc_cmos on CPU hot-plug Igor Mammedov
2013-04-18 17:09 ` Eduardo Habkost
2013-04-22 14:56 ` Andreas Färber
2013-04-22 15:18 ` Igor Mammedov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 07/16] cpu: introduce get_arch_id() method and override it for target-i386 Igor Mammedov
2013-04-18 17:10 ` Eduardo Habkost
2013-04-19 0:05 ` li guang
2013-04-22 9:42 ` Michael S. Tsirkin
2013-04-22 16:33 ` Andreas Färber
2013-04-22 19:10 ` Igor Mammedov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 08/16] cpu: add helper cpu_exists(), to check if CPU with specified id exists Igor Mammedov
2013-04-22 10:28 ` Michael S. Tsirkin
2013-04-22 10:45 ` Igor Mammedov
2013-04-22 11:15 ` Andreas Färber
2013-04-15 22:12 ` Igor Mammedov [this message]
2013-04-22 9:55 ` [Qemu-devel] [PATCH 09/16] acpi_piix4: add infrastructure to send CPU hot-plug GPE to guest Michael S. Tsirkin
2013-04-15 22:12 ` [Qemu-devel] [PATCH 10/16] target-i386: introduce apic-id property Igor Mammedov
2013-04-22 9:49 ` Michael S. Tsirkin
2013-04-22 14:05 ` Andreas Färber
2013-04-22 16:30 ` Igor Mammedov
2013-04-26 16:35 ` Andreas Färber
2013-04-15 22:12 ` [Qemu-devel] [PATCH 11/16] introduce ICC bus/device/bridge Igor Mammedov
2013-04-22 11:39 ` Peter Maydell
2013-04-22 12:27 ` Paolo Bonzini
2013-04-22 13:22 ` Andreas Färber
2013-04-22 15:08 ` Igor Mammedov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 12/16] target-i386: cpu: attach ICC bus to CPU on its creation Igor Mammedov
2013-04-22 15:02 ` Andreas Färber
2013-04-22 15:20 ` Igor Mammedov
2013-04-22 15:27 ` Andreas Färber
2013-04-22 19:14 ` Igor Mammedov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 13/16] target-i386: replace MSI_SPACE_SIZE with APIC_SPACE_SIZE Igor Mammedov
2013-04-22 15:03 ` Andreas Färber
2013-04-15 22:12 ` [Qemu-devel] [PATCH 14/16] target-i386: move APIC to ICC bus Igor Mammedov
2013-04-22 15:18 ` Andreas Färber
2013-04-22 15:59 ` Igor Mammedov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 15/16] target-i386: move IOAPIC " Igor Mammedov
2013-04-15 22:12 ` [Qemu-devel] [PATCH 16/16] add cpu-add qmp command and implement CPU hot-add for target-i386 Igor Mammedov
2013-04-15 22:20 ` Eric Blake
2013-04-16 20:04 ` Igor Mammedov
2013-04-23 16:17 ` Eric Blake
2013-04-16 8:30 ` [Qemu-devel] [PATCH 00/16 v4] target-i386: CPU hot-add with cpu-add QMP command Jan Kiszka
2013-04-16 9:43 ` Igor Mammedov
2013-04-16 13:49 ` Eduardo Habkost
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366063976-4909-10-git-send-email-imammedo@redhat.com \
--to=imammedo@redhat.com \
--cc=aderumier@odiso.com \
--cc=afaerber@suse.de \
--cc=aliguori@us.ibm.com \
--cc=claudio.fontana@huawei.com \
--cc=ehabkost@redhat.com \
--cc=jan.kiszka@siemens.com \
--cc=jfrei@linux.vnet.ibm.com \
--cc=lcapitulino@redhat.com \
--cc=lig.fnst@cn.fujitsu.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).