* [Qemu-devel] [PATCH 1/4] xhci: remove XHCIRing->base (unused)
2013-04-23 8:32 [Qemu-devel] [PULL 0/4] usb patch queue Gerd Hoffmann
@ 2013-04-23 8:32 ` Gerd Hoffmann
2013-04-23 8:32 ` [Qemu-devel] [PATCH 2/4] ehci_free_packet: Discard finished packets when the queue is halted Gerd Hoffmann
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Gerd Hoffmann @ 2013-04-23 8:32 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/usb/hcd-xhci.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index a26b78e..2c90e56 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -326,7 +326,6 @@ typedef enum EPType {
} EPType;
typedef struct XHCIRing {
- dma_addr_t base;
dma_addr_t dequeue;
bool ccs;
} XHCIRing;
@@ -943,7 +942,6 @@ static void xhci_event(XHCIState *xhci, XHCIEvent *event, int v)
static void xhci_ring_init(XHCIState *xhci, XHCIRing *ring,
dma_addr_t base)
{
- ring->base = base;
ring->dequeue = base;
ring->ccs = 1;
}
@@ -1948,7 +1946,7 @@ static void xhci_kick_ep(XHCIState *xhci, unsigned int slotid,
streamid = 0;
xhci_set_ep_state(xhci, epctx, NULL, EP_RUNNING);
}
- assert(ring->base != 0);
+ assert(ring->dequeue != 0);
while (1) {
XHCITransfer *xfer = &epctx->transfers[epctx->next_xfer];
--
1.7.9.7
^ permalink raw reply related [flat|nested] 5+ messages in thread* [Qemu-devel] [PATCH 2/4] ehci_free_packet: Discard finished packets when the queue is halted
2013-04-23 8:32 [Qemu-devel] [PULL 0/4] usb patch queue Gerd Hoffmann
2013-04-23 8:32 ` [Qemu-devel] [PATCH 1/4] xhci: remove XHCIRing->base (unused) Gerd Hoffmann
@ 2013-04-23 8:32 ` Gerd Hoffmann
2013-04-23 8:32 ` [Qemu-devel] [PATCH 3/4] usb: better speed mismatch error reporting Gerd Hoffmann
2013-04-23 8:32 ` [Qemu-devel] [PATCH 4/4] usb-host: raise libusbx minimum version to 1.0.13 Gerd Hoffmann
3 siblings, 0 replies; 5+ messages in thread
From: Gerd Hoffmann @ 2013-04-23 8:32 UTC (permalink / raw)
To: qemu-devel; +Cc: Hans de Goede, Gerd Hoffmann
From: Hans de Goede <hdegoede@redhat.com>
With pipelining it is possible to encounter a finished packet when cleaning
the queue due to a halt. This happens when a non stall error happens while
talking to a real device. In this case the queue on the usb-host side will
continue processing packets, and we can have completed packets waiting in
the queue after an error condition packet causing a halt.
There are 2 reasons to discard the completed packets at this point, rather
then trying to writing them back to the guest:
1) The guest expect to be able to cancel and/or change packets after the
packet with the error without doing an unlink, so writing them back may
confuse the guest.
2) Since the queue does not advance when halted, the writing back of these
packets will fail anyways since p->qtdaddr != q->qtdaddr, so the
ehci_verify_qtd call in ehci_writeback_async_complete_packet will fail.
Note that 2) means that then only functional change this patch introduces
is the printing of a warning when this scenario happens.
Note that discarding these packets means that the guest driver and the device
will get out of sync! This is unfortunate, but should not be a problem since
with a non stall error (iow an io-error) the 2 are out of sync already anyways.
Still this patch adds a warning to signal this happening.
Note that sofar this has only been seen with a DVB-T receiver, which gives
of a MPEG-2 stream, which allows for recovering from lost packets, see:
https://bugzilla.redhat.com/show_bug.cgi?id=890320
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/usb/hcd-ehci.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 5176251..0d3799d 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -586,17 +586,23 @@ static EHCIPacket *ehci_alloc_packet(EHCIQueue *q)
static void ehci_free_packet(EHCIPacket *p)
{
- if (p->async == EHCI_ASYNC_FINISHED) {
+ if (p->async == EHCI_ASYNC_FINISHED &&
+ !(p->queue->qh.token & QTD_TOKEN_HALT)) {
ehci_writeback_async_complete_packet(p);
return;
}
trace_usb_ehci_packet_action(p->queue, p, "free");
- if (p->async == EHCI_ASYNC_INITIALIZED) {
- usb_packet_unmap(&p->packet, &p->sgl);
- qemu_sglist_destroy(&p->sgl);
- }
if (p->async == EHCI_ASYNC_INFLIGHT) {
usb_cancel_packet(&p->packet);
+ }
+ if (p->async == EHCI_ASYNC_FINISHED &&
+ p->packet.status == USB_RET_SUCCESS) {
+ fprintf(stderr,
+ "EHCI: Dropping completed packet from halted %s ep %02X\n",
+ (p->pid == USB_TOKEN_IN) ? "in" : "out",
+ get_field(p->queue->qh.epchar, QH_EPCHAR_EP));
+ }
+ if (p->async != EHCI_ASYNC_NONE) {
usb_packet_unmap(&p->packet, &p->sgl);
qemu_sglist_destroy(&p->sgl);
}
--
1.7.9.7
^ permalink raw reply related [flat|nested] 5+ messages in thread* [Qemu-devel] [PATCH 3/4] usb: better speed mismatch error reporting
2013-04-23 8:32 [Qemu-devel] [PULL 0/4] usb patch queue Gerd Hoffmann
2013-04-23 8:32 ` [Qemu-devel] [PATCH 1/4] xhci: remove XHCIRing->base (unused) Gerd Hoffmann
2013-04-23 8:32 ` [Qemu-devel] [PATCH 2/4] ehci_free_packet: Discard finished packets when the queue is halted Gerd Hoffmann
@ 2013-04-23 8:32 ` Gerd Hoffmann
2013-04-23 8:32 ` [Qemu-devel] [PATCH 4/4] usb-host: raise libusbx minimum version to 1.0.13 Gerd Hoffmann
3 siblings, 0 replies; 5+ messages in thread
From: Gerd Hoffmann @ 2013-04-23 8:32 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann
Report the supported speeds for device and port in the error message.
Also add the speeds to the tracepoint. And while being at it drop
the redundant error message in usb_desc_attach, usb_device_attach will
report the error anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/usb/bus.c | 36 ++++++++++++++++++++++++++++++++----
hw/usb/desc.c | 2 --
trace-events | 2 +-
3 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/hw/usb/bus.c b/hw/usb/bus.c
index b10c290..d1827be 100644
--- a/hw/usb/bus.c
+++ b/hw/usb/bus.c
@@ -417,19 +417,47 @@ void usb_release_port(USBDevice *dev)
bus->nfree++;
}
+static void usb_mask_to_str(char *dest, size_t size,
+ unsigned int speedmask)
+{
+ static const struct {
+ unsigned int mask;
+ const char *name;
+ } speeds[] = {
+ { .mask = USB_SPEED_MASK_FULL, .name = "full" },
+ { .mask = USB_SPEED_MASK_HIGH, .name = "high" },
+ { .mask = USB_SPEED_MASK_SUPER, .name = "super" },
+ };
+ int i, pos = 0;
+
+ for (i = 0; i < ARRAY_SIZE(speeds); i++) {
+ if (speeds[i].mask & speedmask) {
+ pos += snprintf(dest + pos, size - pos, "%s%s",
+ pos ? "+" : "",
+ speeds[i].name);
+ }
+ }
+}
+
int usb_device_attach(USBDevice *dev)
{
USBBus *bus = usb_bus_from_device(dev);
USBPort *port = dev->port;
+ char devspeed[32], portspeed[32];
assert(port != NULL);
assert(!dev->attached);
- trace_usb_port_attach(bus->busnr, port->path);
+ usb_mask_to_str(devspeed, sizeof(devspeed), dev->speedmask);
+ usb_mask_to_str(portspeed, sizeof(portspeed), port->speedmask);
+ trace_usb_port_attach(bus->busnr, port->path,
+ devspeed, portspeed);
if (!(port->speedmask & dev->speedmask)) {
- error_report("Warning: speed mismatch trying to attach "
- "usb device %s to bus %s",
- dev->product_desc, bus->qbus.name);
+ error_report("Warning: speed mismatch trying to attach"
+ " usb device \"%s\" (%s speed)"
+ " to bus \"%s\", port \"%s\" (%s speed)",
+ dev->product_desc, devspeed,
+ bus->qbus.name, port->path, portspeed);
return -1;
}
diff --git a/hw/usb/desc.c b/hw/usb/desc.c
index b389381..fce303e 100644
--- a/hw/usb/desc.c
+++ b/hw/usb/desc.c
@@ -522,8 +522,6 @@ void usb_desc_attach(USBDevice *dev)
} else if (desc->full && (dev->port->speedmask & USB_SPEED_MASK_FULL)) {
dev->speed = USB_SPEED_FULL;
} else {
- fprintf(stderr, "usb: port/device speed mismatch for \"%s\"\n",
- usb_device_get_product_desc(dev));
return;
}
usb_desc_setdefaults(dev);
diff --git a/trace-events b/trace-events
index e587487..ffaa3f4 100644
--- a/trace-events
+++ b/trace-events
@@ -277,7 +277,7 @@ usb_packet_state_fault(int bus, const char *port, int ep, void *p, const char *o
# hw/usb/bus.c
usb_port_claim(int bus, const char *port) "bus %d, port %s"
-usb_port_attach(int bus, const char *port) "bus %d, port %s"
+usb_port_attach(int bus, const char *port, const char *devspeed, const char *portspeed) "bus %d, port %s, devspeed %s, portspeed %s"
usb_port_detach(int bus, const char *port) "bus %d, port %s"
usb_port_release(int bus, const char *port) "bus %d, port %s"
--
1.7.9.7
^ permalink raw reply related [flat|nested] 5+ messages in thread* [Qemu-devel] [PATCH 4/4] usb-host: raise libusbx minimum version to 1.0.13
2013-04-23 8:32 [Qemu-devel] [PULL 0/4] usb patch queue Gerd Hoffmann
` (2 preceding siblings ...)
2013-04-23 8:32 ` [Qemu-devel] [PATCH 3/4] usb: better speed mismatch error reporting Gerd Hoffmann
@ 2013-04-23 8:32 ` Gerd Hoffmann
3 siblings, 0 replies; 5+ messages in thread
From: Gerd Hoffmann @ 2013-04-23 8:32 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann
Allows to remove one FIXME. Makes LIBUSB_LOG_LEVEL_WARNING build errors
go away. And starting with that version libusb has a LIBUSBX_API_VERSION
define which allows to easily #ifdef version dependencies should that
need arrive in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
configure | 2 +-
hw/usb/host-libusb.c | 5 -----
2 files changed, 1 insertion(+), 6 deletions(-)
diff --git a/configure b/configure
index 51a6c56..33d3354 100755
--- a/configure
+++ b/configure
@@ -3060,7 +3060,7 @@ fi
# check for libusb
if test "$libusb" != "no" ; then
- if $pkg_config libusb-1.0 >/dev/null 2>&1 ; then
+ if $pkg_config --atleast-version=1.0.13 libusb-1.0 >/dev/null 2>&1 ; then
libusb="yes"
usb="libusb"
libusb_cflags=$($pkg_config --cflags libusb-1.0 2>/dev/null)
diff --git a/hw/usb/host-libusb.c b/hw/usb/host-libusb.c
index 29f35b3..d1186b8 100644
--- a/hw/usb/host-libusb.c
+++ b/hw/usb/host-libusb.c
@@ -236,8 +236,6 @@ static int usb_host_init(void)
static int usb_host_get_port(libusb_device *dev, char *port, size_t len)
{
-#if defined(LIBUSBX_API_VERSION) && (LIBUSBX_API_VERSION >= 0x010000ff)
- /* have libusb_get_port_path() */
uint8_t path[7];
size_t off;
int rc, i;
@@ -251,9 +249,6 @@ static int usb_host_get_port(libusb_device *dev, char *port, size_t len)
off += snprintf(port+off, len-off, ".%d", path[i]);
}
return off;
-#else
- return snprintf(port, len, "FIXME");
-#endif
}
static void usb_host_libusb_error(const char *func, int rc)
--
1.7.9.7
^ permalink raw reply related [flat|nested] 5+ messages in thread