From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, stefanha@redhat.com
Subject: [Qemu-devel] [PATCH 5/5] qtest/ide-test: Test short and long PRDTs
Date: Wed, 8 May 2013 11:43:26 +0200 [thread overview]
Message-ID: <1368006206-2602-6-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1368006206-2602-1-git-send-email-kwolf@redhat.com>
This tests the behaviour of the DMA engine when the given PRDT contains
physical region descriptors for either more or less bytes than the
IDE request is for.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/ide-test.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/tests/ide-test.c b/tests/ide-test.c
index 5fc496f..bdc1da7 100644
--- a/tests/ide-test.c
+++ b/tests/ide-test.c
@@ -77,6 +77,8 @@ enum {
CMD_READ_DMA = 0xc8,
CMD_WRITE_DMA = 0xca,
CMD_IDENTIFY = 0xec,
+
+ CMDF_ABORT = 0x100,
};
enum {
@@ -170,9 +172,13 @@ static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
size_t len;
bool from_dev;
uint8_t status;
+ int flags;
dev = get_pci_device(&bmdma_base);
+ flags = cmd & ~0xff;
+ cmd &= 0xff;
+
switch (cmd) {
case CMD_READ_DMA:
from_dev = true;
@@ -209,6 +215,10 @@ static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
/* Start DMA transfer */
outb(bmdma_base + bmreg_cmd, BM_CMD_START | (from_dev ? BM_CMD_WRITE : 0));
+ if (flags & CMDF_ABORT) {
+ outb(bmdma_base + bmreg_cmd, 0);
+ }
+
/* Wait for the DMA transfer to complete */
do {
status = inb(bmdma_base + bmreg_status);
@@ -289,6 +299,48 @@ static void test_bmdma_simple_rw(void)
g_free(cmpbuf);
}
+static void test_bmdma_short_prdt(void)
+{
+ uint8_t status;
+
+ PrdtEntry prdt[] = {
+ { .addr = 0, .size = 0x10 | PRDT_EOT },
+ };
+
+ /* Normal request */
+ status = send_dma_request(CMD_READ_DMA, 0, 1,
+ prdt, ARRAY_SIZE(prdt));
+ g_assert_cmphex(status, ==, 0);
+ assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+ /* Abort the request before it completes */
+ status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
+ prdt, ARRAY_SIZE(prdt));
+ g_assert_cmphex(status, ==, 0);
+ assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+}
+
+static void test_bmdma_long_prdt(void)
+{
+ uint8_t status;
+
+ PrdtEntry prdt[] = {
+ { .addr = 0, .size = 0x1000 | PRDT_EOT },
+ };
+
+ /* Normal request */
+ status = send_dma_request(CMD_READ_DMA, 0, 1,
+ prdt, ARRAY_SIZE(prdt));
+ g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR);
+ assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+ /* Abort the request before it completes */
+ status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
+ prdt, ARRAY_SIZE(prdt));
+ g_assert_cmphex(status, ==, BM_STS_INTR);
+ assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+}
+
static void test_bmdma_setup(void)
{
ide_test_start(
@@ -375,6 +427,8 @@ int main(int argc, char **argv)
qtest_add_func("/ide/bmdma/setup", test_bmdma_setup);
qtest_add_func("/ide/bmdma/simple_rw", test_bmdma_simple_rw);
+ qtest_add_func("/ide/bmdma/short_prdt", test_bmdma_short_prdt);
+ qtest_add_func("/ide/bmdma/long_prdt", test_bmdma_long_prdt);
qtest_add_func("/ide/bmdma/teardown", test_bmdma_teardown);
ret = g_test_run();
--
1.8.1.4
prev parent reply other threads:[~2013-05-08 9:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-08 9:43 [Qemu-devel] [PATCH 1.5 0/5] ide: Test cases and a corner case fix Kevin Wolf
2013-05-08 9:43 ` [Qemu-devel] [PATCH 1/5] ide: Reset BMIDEA bit when the bus master is stopped Kevin Wolf
2013-05-08 14:35 ` Stefan Hajnoczi
2013-05-08 9:43 ` [Qemu-devel] [PATCH 2/5] libqos/pci: Enable bus mastering Kevin Wolf
2013-05-08 9:43 ` [Qemu-devel] [PATCH 3/5] qtest: Add IDE test case Kevin Wolf
2013-05-08 9:43 ` [Qemu-devel] [PATCH 4/5] qtest/ide-test: Add simple DMA read/write " Kevin Wolf
2013-05-08 16:28 ` Paolo Bonzini
2013-05-08 9:43 ` Kevin Wolf [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368006206-2602-6-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).