qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: aliguori@us.ibm.com, mst@redhat.com
Cc: qemu-devel@nongnu.org, David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCH 3/8] pci: Abolish pci_find_root_bus()
Date: Thu,  9 May 2013 10:31:07 +1000	[thread overview]
Message-ID: <1368059472-25071-4-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1368059472-25071-1-git-send-email-david@gibson.dropbear.id.au>

pci_find_root_bus() takes a domain parameter.  Currently PCI root buses
with domain other than 0 can't be created, so this is more or less a long
winded way of retrieving the main PCI root bus.  Numbered domains don't
actually properly cover the (non x86) possibilities for multiple PCI root
buses, so this patch for now enforces the domain == 0 restriction in other
places to replace pci_find_root_bus() with an explicit
pci_get_primary_bus().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 hw/pci/pci-hotplug-old.c |   34 +++++++++++++++++++++++++---------
 hw/pci/pci.c             |   19 +++++++++++++++----
 include/hw/pci/pci.h     |    2 +-
 3 files changed, 41 insertions(+), 14 deletions(-)

diff --git a/hw/pci/pci-hotplug-old.c b/hw/pci/pci-hotplug-old.c
index 1aa0ab8..55441c6 100644
--- a/hw/pci/pci-hotplug-old.c
+++ b/hw/pci/pci-hotplug-old.c
@@ -34,17 +34,23 @@
 #include "sysemu/blockdev.h"
 #include "qapi/error.h"
 
-static int pci_read_devaddr(Monitor *mon, const char *addr, int *domp,
+static int pci_read_devaddr(Monitor *mon, const char *addr,
                             int *busp, unsigned *slotp)
 {
+    int dom;
+
     /* strip legacy tag */
     if (!strncmp(addr, "pci_addr=", 9)) {
         addr += 9;
     }
-    if (pci_parse_devaddr(addr, domp, busp, slotp, NULL)) {
+    if (pci_parse_devaddr(addr, &dom, busp, slotp, NULL)) {
         monitor_printf(mon, "Invalid pci address\n");
         return -1;
     }
+    if (dom != 0) {
+        monitor_printf(mon, "Multiple PCI domains not supported, use device_add\n");
+        return -1;
+    }
     return 0;
 }
 
@@ -126,18 +132,22 @@ static int scsi_hot_add(Monitor *mon, DeviceState *adapter,
 
 int pci_drive_hot_add(Monitor *mon, const QDict *qdict, DriveInfo *dinfo)
 {
-    int dom, pci_bus;
+    int pci_bus;
     unsigned slot;
+    PCIBus *root = pci_get_primary_bus();
     PCIDevice *dev;
     const char *pci_addr = qdict_get_str(qdict, "pci_addr");
 
     switch (dinfo->type) {
     case IF_SCSI:
-        if (pci_read_devaddr(mon, pci_addr, &dom, &pci_bus, &slot)) {
+        if (!root) {
+            monitor_printf(mon, "no primary PCI bus\n");
+            goto err;
+        }
+        if (pci_read_devaddr(mon, pci_addr, &pci_bus, &slot)) {
             goto err;
         }
-        dev = pci_find_device(pci_find_root_bus(dom), pci_bus,
-                              PCI_DEVFN(slot, 0));
+        dev = pci_find_device(root, pci_bus, PCI_DEVFN(slot, 0));
         if (!dev) {
             monitor_printf(mon, "no pci device with address %s\n", pci_addr);
             goto err;
@@ -273,16 +283,22 @@ void pci_device_hot_add(Monitor *mon, const QDict *qdict)
 
 static int pci_device_hot_remove(Monitor *mon, const char *pci_addr)
 {
+    PCIBus *root = pci_get_primary_bus();
     PCIDevice *d;
-    int dom, bus;
+    int bus;
     unsigned slot;
     Error *local_err = NULL;
 
-    if (pci_read_devaddr(mon, pci_addr, &dom, &bus, &slot)) {
+    if (!root) {
+        monitor_printf(mon, "no primary PCI bus\n");
+        return -1;
+    }
+
+    if (pci_read_devaddr(mon, pci_addr, &bus, &slot)) {
         return -1;
     }
 
-    d = pci_find_device(pci_find_root_bus(dom), bus, PCI_DEVFN(slot, 0));
+    d = pci_find_device(root, bus, PCI_DEVFN(slot, 0));
     if (!d) {
         monitor_printf(mon, "slot %d empty\n", slot);
         return -1;
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 9906e84..9503d56 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -246,12 +246,12 @@ static void pci_host_bus_register(int domain, PCIBus *bus)
     QLIST_INSERT_HEAD(&host_buses, host, next);
 }
 
-PCIBus *pci_find_root_bus(int domain)
+PCIBus *pci_get_primary_bus(void)
 {
     struct PCIHostBus *host;
 
     QLIST_FOREACH(host, &host_buses, next) {
-        if (host->domain == domain) {
+        if (host->domain == 0) {
             return host->bus;
         }
     }
@@ -583,20 +583,31 @@ int pci_parse_devaddr(const char *addr, int *domp, int *busp,
 
 PCIBus *pci_get_bus_devfn(int *devfnp, const char *devaddr)
 {
+    PCIBus *root = pci_get_primary_bus();
     int dom, bus;
     unsigned slot;
 
+    if (!root) {
+        fprintf(stderr, "No primary PCI bus\n");
+        return NULL;
+    }
+
     if (!devaddr) {
         *devfnp = -1;
-        return pci_find_bus_nr(pci_find_root_bus(0), 0);
+        return pci_find_bus_nr(root, 0);
     }
 
     if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
         return NULL;
     }
 
+    if (dom != 0) {
+        fprintf(stderr, "No support for non-zero PCI domains\n");
+        return NULL;
+    }
+
     *devfnp = PCI_DEVFN(slot, 0);
-    return pci_find_bus_nr(pci_find_root_bus(dom), bus);
+    return pci_find_bus_nr(root, bus);
 }
 
 static void pci_init_cmask(PCIDevice *dev)
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index 3ef2ee1..38682e8 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -390,7 +390,7 @@ int pci_bus_num(PCIBus *s);
 void pci_for_each_device(PCIBus *bus, int bus_num,
                          void (*fn)(PCIBus *bus, PCIDevice *d, void *opaque),
                          void *opaque);
-PCIBus *pci_find_root_bus(int domain);
+PCIBus *pci_get_primary_bus(void);
 int pci_find_domain(const PCIBus *bus);
 PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn);
 int pci_qdev_find_device(const char *id, PCIDevice **pdev);
-- 
1.7.10.4

  parent reply	other threads:[~2013-05-09  0:32 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-09  0:31 [Qemu-devel] [0/8] Clean up PCI code to allow for multiple root buses David Gibson
2013-05-09  0:31 ` [Qemu-devel] [PATCH 1/8] pci: Cleanup configuration for pci-hotplug.c David Gibson
2013-05-23 11:11   ` Michael S. Tsirkin
2013-05-23 12:23     ` David Gibson
2013-05-24  7:44     ` David Gibson
2013-05-23 14:54   ` Paolo Bonzini
2013-05-24  7:46     ` David Gibson
2013-05-09  0:31 ` [Qemu-devel] [PATCH 2/8] pci: Move pci_read_devaddr to pci-hotplug-old.c David Gibson
2013-05-09  0:31 ` David Gibson [this message]
2013-05-23 11:26   ` [Qemu-devel] [PATCH 3/8] pci: Abolish pci_find_root_bus() Michael S. Tsirkin
2013-05-09  0:31 ` [Qemu-devel] [PATCH 4/8] pci: Use helper o find device's root bus in pci_find_domain() David Gibson
2013-05-09  0:31 ` [Qemu-devel] [PATCH 5/8] pci: Replace pci_find_domain() with more general pci_root_bus_path() David Gibson
2013-05-23 11:04   ` Michael S. Tsirkin
2013-05-23 12:21     ` David Gibson
2013-05-23 14:51     ` Paolo Bonzini
2013-05-23 14:57       ` Michael S. Tsirkin
2013-05-23 15:00         ` Paolo Bonzini
2013-05-23 15:06           ` Michael S. Tsirkin
2013-05-24  7:40           ` David Gibson
2013-05-09  0:31 ` [Qemu-devel] [PATCH 6/8] pci: Simpler implementation of primary PCI bus David Gibson
2013-05-23 11:01   ` Michael S. Tsirkin
2013-05-23 12:16     ` David Gibson
2013-05-23 14:39       ` Michael S. Tsirkin
2013-05-23 11:22   ` Michael S. Tsirkin
2013-05-23 12:16     ` David Gibson
2013-05-29  9:43       ` David Gibson
2013-05-29  9:47         ` David Gibson
2013-05-29  9:55         ` Michael S. Tsirkin
2013-05-29 10:06           ` David Gibson
2013-05-29 10:17             ` Michael S. Tsirkin
2013-05-29 11:04               ` David Gibson
2013-05-29 12:22                 ` Michael S. Tsirkin
2013-05-30  3:34                   ` David Gibson
2013-05-30  5:02                     ` Michael S. Tsirkin
2013-06-06  7:39                       ` David Gibson
2013-06-06  8:18                         ` Michael S. Tsirkin
2013-05-09  0:31 ` [Qemu-devel] [PATCH 7/8] pci: Remove domain from PCIHostBus David Gibson
2013-05-09  0:31 ` [Qemu-devel] [PATCH 8/8] pci: Fold host_buses list into PCIHostState functionality David Gibson
2013-05-14 10:53 ` [Qemu-devel] [0/8] Clean up PCI code to allow for multiple root buses Michael S. Tsirkin
2013-05-23 11:12 ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1368059472-25071-4-git-send-email-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=aliguori@us.ibm.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).