qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, jan.kiszka@gmail.com,
	Avi Kivity <avi.kivity@gmail.com>,
	David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCH 13/30] memory: limit sections in the radix tree to the actual address space size
Date: Tue, 21 May 2013 12:57:14 +0200	[thread overview]
Message-ID: <1369133851-1894-14-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1369133851-1894-1-git-send-email-pbonzini@redhat.com>

From: Avi Kivity <avi.kivity@gmail.com>

The radix tree is statically sized to fit TARGET_PHYS_ADDR_SPACE_BITS.
If a larger memory region is registered, it will overflow.

Fix by limiting any section in the radix tree to the supported size.

This problem was not observed earlier since artificial regions (containers
and aliases) are eliminated by the memory core, leaving only device regions
which have reasonable sizes.  An IOMMU however cannot be eliminated by the
memory core, and may have an artificial size.

Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Fail the build if TARGET_PHYS_ADDR_SPACE_BITS is too large - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 exec.c                | 13 ++++++++++++-
 include/exec/memory.h |  3 +++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/exec.c b/exec.c
index 380245f..8d91221 100644
--- a/exec.c
+++ b/exec.c
@@ -771,10 +771,21 @@ static void register_multipage(AddressSpaceDispatch *d, MemoryRegionSection *sec
                   section_index);
 }
 
+QEMU_BUILD_BUG_ON(TARGET_PHYS_ADDR_SPACE_BITS > MAX_PHYS_ADDR_SPACE_BITS)
+
+static MemoryRegionSection limit(MemoryRegionSection section)
+{
+    section.size = MIN(section.offset_within_address_space + section.size,
+                       MAX_PHYS_ADDR + 1)
+                   - section.offset_within_address_space;
+
+    return section;
+}
+
 static void mem_add(MemoryListener *listener, MemoryRegionSection *section)
 {
     AddressSpaceDispatch *d = container_of(listener, AddressSpaceDispatch, listener);
-    MemoryRegionSection now = *section, remain = *section;
+    MemoryRegionSection now = limit(*section), remain = limit(*section);
 
     if ((now.offset_within_address_space & ~TARGET_PAGE_MASK)
         || (now.size < TARGET_PAGE_SIZE)) {
diff --git a/include/exec/memory.h b/include/exec/memory.h
index 9fae89b..6ed593c 100644
--- a/include/exec/memory.h
+++ b/include/exec/memory.h
@@ -26,6 +26,9 @@
 #include "exec/ioport.h"
 #include "qemu/int128.h"
 
+#define MAX_PHYS_ADDR_SPACE_BITS 62
+#define MAX_PHYS_ADDR            (((hwaddr)1 << MAX_PHYS_ADDR_SPACE_BITS) - 1)
+
 typedef struct MemoryRegionOps MemoryRegionOps;
 typedef struct MemoryRegionPortio MemoryRegionPortio;
 typedef struct MemoryRegionMmio MemoryRegionMmio;
-- 
1.8.1.4

  parent reply	other threads:[~2013-05-21 10:58 UTC|newest]

Thread overview: 106+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-21 10:57 [Qemu-devel] [PATCH 00/30] Introduction of IOMMUs into the memory API Paolo Bonzini
2013-05-21 10:57 ` [Qemu-devel] [PATCH 01/30] exec: remove obsolete comment Paolo Bonzini
2013-05-21 11:36   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 02/30] exec: eliminate qemu_put_ram_ptr Paolo Bonzini
2013-05-21 11:38   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 03/30] exec: make qemu_get_ram_ptr private Paolo Bonzini
2013-05-21 11:38   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 04/30] exec: eliminate stq_phys_notdirty Paolo Bonzini
2013-05-23 17:32   ` Peter Maydell
2013-05-23 19:18     ` Anthony Liguori
2013-05-23 19:22     ` Paolo Bonzini
2013-05-23 23:14       ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 05/30] memory: assert that PhysPageEntry's ptr does not overflow Paolo Bonzini
2013-05-23 17:36   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 06/30] memory: allow memory_region_find() to run on non-root memory regions Paolo Bonzini
2013-05-23 17:52   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 07/30] memory: Replace open-coded memory_region_is_romd Paolo Bonzini
2013-05-21 11:54   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 08/30] memory: Rename readable flag to romd_mode Paolo Bonzini
2013-05-21 10:57 ` [Qemu-devel] [PATCH 09/30] memory: do not duplicate memory_region_destructor_none Paolo Bonzini
2013-05-21 11:55   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 10/30] memory: make memory_global_sync_dirty_bitmap take an AddressSpace Paolo Bonzini
2013-05-21 11:56   ` Peter Maydell
2013-05-23  1:05   ` David Gibson
2013-05-21 10:57 ` [Qemu-devel] [PATCH 11/30] memory: fix address space initialization/destruction Paolo Bonzini
2013-05-21 11:58   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 12/30] s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62 Paolo Bonzini
2013-05-21 10:57 ` Paolo Bonzini [this message]
2013-05-21 12:02   ` [Qemu-devel] [PATCH 13/30] memory: limit sections in the radix tree to the actual address space size Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 14/30] memory: create FlatView for new address spaces Paolo Bonzini
2013-05-21 12:03   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 15/30] memory: add address_space_valid Paolo Bonzini
2013-05-23 12:05   ` David Gibson
2013-05-23 14:22     ` Jan Kiszka
2013-05-23 14:43       ` Paolo Bonzini
2013-05-23 18:04   ` Peter Maydell
2013-05-24  6:13     ` Jan Kiszka
2013-05-24 10:28       ` Jan Kiszka
2013-05-24 10:50       ` Peter Maydell
2013-05-24 11:02         ` Jan Kiszka
2013-05-24  8:02     ` Paolo Bonzini
2013-05-24 10:52       ` Peter Maydell
2013-05-24 12:58         ` Paolo Bonzini
2013-05-24 13:27           ` Peter Maydell
2013-05-24 13:33             ` Paolo Bonzini
2013-05-24 13:38               ` Peter Maydell
2013-05-25  3:44         ` David Gibson
2013-05-25  9:23           ` Peter Maydell
2013-05-26 13:02             ` David Gibson
2013-05-21 10:57 ` [Qemu-devel] [PATCH 16/30] memory: clean up phys_page_find Paolo Bonzini
2013-05-23 18:06   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 17/30] memory: add address_space_translate Paolo Bonzini
2013-05-23  7:09   ` liu ping fan
2013-05-23  9:59     ` Paolo Bonzini
2013-05-23 13:06       ` liu ping fan
2013-05-23 13:17         ` Paolo Bonzini
2013-05-23 18:15   ` Peter Maydell
2013-05-25  6:40   ` Jan Kiszka
2013-05-25  7:47     ` Paolo Bonzini
2013-05-25 10:19       ` Jan Kiszka
2013-05-25 11:20         ` Paolo Bonzini
2013-05-25 11:30           ` Jan Kiszka
2013-05-26  8:56             ` Paolo Bonzini
2013-05-26  9:02               ` Jan Kiszka
2013-05-27  7:20                 ` Paolo Bonzini
2013-05-27  7:23                   ` Jan Kiszka
2013-05-27  8:19                     ` Paolo Bonzini
2013-05-27  8:37                       ` Jan Kiszka
2013-05-27 10:33                       ` Peter Maydell
2013-05-27 10:45                         ` Paolo Bonzini
2013-05-27 11:33                           ` Peter Maydell
2013-05-26  9:01             ` Paolo Bonzini
2013-05-26  9:12               ` Jan Kiszka
2013-05-26 18:23                 ` Paolo Bonzini
2013-05-21 10:57 ` [Qemu-devel] [PATCH 18/30] memory: add return value to address_space_rw/read/write Paolo Bonzini
2013-05-23 18:18   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 19/30] memory: Introduce address_space_lookup_region Paolo Bonzini
2013-05-23 18:19   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 20/30] memory: iommu support Paolo Bonzini
2013-05-23 18:24   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 21/30] memory: Add iommu map/unmap notifiers Paolo Bonzini
2013-05-23 18:27   ` Peter Maydell
2013-05-23 19:24     ` Paolo Bonzini
2013-05-29  4:08       ` David Gibson
2013-05-21 10:57 ` [Qemu-devel] [PATCH 22/30] vfio: abort if an emulated iommu is used Paolo Bonzini
2013-05-21 10:57 ` [Qemu-devel] [PATCH 23/30] spapr: convert TCE API to use an opaque type Paolo Bonzini
2013-05-21 10:57 ` [Qemu-devel] [PATCH 24/30] spapr: make IOMMU translation go through IOMMUTLBEntry Paolo Bonzini
2013-05-21 10:57 ` [Qemu-devel] [PATCH 25/30] spapr: use memory core for iommu support Paolo Bonzini
2013-05-21 10:57 ` [Qemu-devel] [PATCH 26/30] dma: eliminate old-style IOMMU support Paolo Bonzini
2013-05-23 18:31   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 27/30] pci: use memory core for iommu support Paolo Bonzini
2013-05-23 18:36   ` Peter Maydell
2013-05-23 21:22   ` Michael S. Tsirkin
2013-05-21 10:57 ` [Qemu-devel] [PATCH 28/30] spapr_vio: take care of creating our own AddressSpace/DMAContext Paolo Bonzini
2013-05-21 10:57 ` [Qemu-devel] [PATCH 29/30] dma: eliminate DMAContext Paolo Bonzini
2013-05-23 18:40   ` Peter Maydell
2013-05-21 10:57 ` [Qemu-devel] [PATCH 30/30] memory: give name to every AddressSpace Paolo Bonzini
2013-05-23 18:46   ` Peter Maydell
2013-05-22  2:30 ` [Qemu-devel] [PATCH 00/30] Introduction of IOMMUs into the memory API Alexey Kardashevskiy
2013-05-22  9:24   ` Paolo Bonzini
2013-05-23 17:08     ` Paolo Bonzini
2013-05-23 17:25       ` Peter Maydell
2013-05-23 17:30         ` Paolo Bonzini
2013-05-23 18:47         ` Peter Maydell
2013-05-24 14:12       ` Alexey Kardashevskiy
2013-05-24 14:20         ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369133851-1894-14-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=avi.kivity@gmail.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=jan.kiszka@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).