[Qemu-devel] [PATCH 09/10] virtio-pci: switch to linux-headers

["Michael S. Tsirkin" <mst@redhat.com>]

It's easier to keep everything in sync if
we just use linux headers for virtio constants.
Add virtio_pci.h header from linux 3.10-rc1, and
remove duplicate symbols from virtio-pci.h

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/virtio/virtio-pci.c           | 49 +++-----------------
 linux-headers/linux/virtio_pci.h | 97 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 102 insertions(+), 44 deletions(-)
 create mode 100644 linux-headers/linux/virtio_pci.h

diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 4073a09..b7a1297 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -34,53 +34,14 @@
 #include "qemu/range.h"
 #include "hw/virtio/virtio-bus.h"
 #include "qapi/visitor.h"
-
-/* from Linux's linux/virtio_pci.h */
-
-/* A 32-bit r/o bitmask of the features supported by the host */
-#define VIRTIO_PCI_HOST_FEATURES        0
-
-/* A 32-bit r/w bitmask of features activated by the guest */
-#define VIRTIO_PCI_GUEST_FEATURES       4
-
-/* A 32-bit r/w PFN for the currently selected queue */
-#define VIRTIO_PCI_QUEUE_PFN            8
-
-/* A 16-bit r/o queue size for the currently selected queue */
-#define VIRTIO_PCI_QUEUE_NUM            12
-
-/* A 16-bit r/w queue selector */
-#define VIRTIO_PCI_QUEUE_SEL            14
-
-/* A 16-bit r/w queue notifier */
-#define VIRTIO_PCI_QUEUE_NOTIFY         16
-
-/* An 8-bit device status register.  */
-#define VIRTIO_PCI_STATUS               18
-
-/* An 8-bit r/o interrupt status register.  Reading the value will return the
- * current contents of the ISR and will also clear it.  This is effectively
- * a read-and-acknowledge. */
-#define VIRTIO_PCI_ISR                  19
-
-/* MSI-X registers: only enabled if MSI-X is enabled. */
-/* A 16-bit vector for configuration changes. */
-#define VIRTIO_MSI_CONFIG_VECTOR        20
-/* A 16-bit vector for selected queue notifications. */
-#define VIRTIO_MSI_QUEUE_VECTOR         22
+#include "linux/virtio_pci.h"
 
 /* Config space size */
-#define VIRTIO_PCI_CONFIG_NOMSI         20
-#define VIRTIO_PCI_CONFIG_MSI           24
-#define VIRTIO_PCI_REGION_SIZE(dev)     (msix_present(dev) ? \
-                                         VIRTIO_PCI_CONFIG_MSI : \
-                                         VIRTIO_PCI_CONFIG_NOMSI)
+#define VIRTIO_PCI_REGION_SIZE(dev)     VIRTIO_PCI_CONFIG_OFF(msix_present(dev))
 
 /* The remaining space is defined by each driver as the per-driver
  * configuration space */
-#define VIRTIO_PCI_CONFIG(dev)          (msix_enabled(dev) ? \
-                                         VIRTIO_PCI_CONFIG_MSI : \
-                                         VIRTIO_PCI_CONFIG_NOMSI)
+#define VIRTIO_PCI_CONFIG_SIZE(dev)     VIRTIO_PCI_CONFIG_OFF(msix_enabled(dev))
 
 /* How many bits to shift physical queue address written to QUEUE_PFN.
  * 12 is historical, and due to x86 page size. */
@@ -386,7 +347,7 @@ static uint64_t virtio_pci_config_read(void *opaque, hwaddr addr,
                                        unsigned size)
 {
     VirtIOPCIProxy *proxy = opaque;
-    uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
+    uint32_t config = VIRTIO_PCI_CONFIG_SIZE(&proxy->pci_dev);
     uint64_t val = 0;
     if (addr < config) {
         return virtio_ioport_read(proxy, addr);
@@ -417,7 +378,7 @@ static void virtio_pci_config_write(void *opaque, hwaddr addr,
                                     uint64_t val, unsigned size)
 {
     VirtIOPCIProxy *proxy = opaque;
-    uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
+    uint32_t config = VIRTIO_PCI_CONFIG_SIZE(&proxy->pci_dev);
     if (addr < config) {
         virtio_ioport_write(proxy, addr, val);
         return;
diff --git a/linux-headers/linux/virtio_pci.h b/linux-headers/linux/virtio_pci.h
new file mode 100644
index 0000000..e5ec1ca
--- /dev/null
+++ b/linux-headers/linux/virtio_pci.h
@@ -0,0 +1,97 @@
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ *  Anthony Liguori  <aliguori@us.ibm.com>
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_PCI_H
+#define _LINUX_VIRTIO_PCI_H
+
+#include <linux/virtio_config.h>
+
+/* A 32-bit r/o bitmask of the features supported by the host */
+#define VIRTIO_PCI_HOST_FEATURES	0
+
+/* A 32-bit r/w bitmask of features activated by the guest */
+#define VIRTIO_PCI_GUEST_FEATURES	4
+
+/* A 32-bit r/w PFN for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_PFN		8
+
+/* A 16-bit r/o queue size for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_NUM		12
+
+/* A 16-bit r/w queue selector */
+#define VIRTIO_PCI_QUEUE_SEL		14
+
+/* A 16-bit r/w queue notifier */
+#define VIRTIO_PCI_QUEUE_NOTIFY		16
+
+/* An 8-bit device status register.  */
+#define VIRTIO_PCI_STATUS		18
+
+/* An 8-bit r/o interrupt status register.  Reading the value will return the
+ * current contents of the ISR and will also clear it.  This is effectively
+ * a read-and-acknowledge. */
+#define VIRTIO_PCI_ISR			19
+
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG		0x2
+
+/* MSI-X registers: only enabled if MSI-X is enabled. */
+/* A 16-bit vector for configuration changes. */
+#define VIRTIO_MSI_CONFIG_VECTOR        20
+/* A 16-bit vector for selected queue notifications. */
+#define VIRTIO_MSI_QUEUE_VECTOR         22
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR            0xffff
+
+/* The remaining space is defined by each driver as the per-driver
+ * configuration space */
+#define VIRTIO_PCI_CONFIG_OFF(msix_enabled)	((msix_enabled) ? 24 : 20)
+/* Deprecated: please use VIRTIO_PCI_CONFIG_OFF instead */
+#define VIRTIO_PCI_CONFIG(dev)	VIRTIO_PCI_CONFIG_OFF((dev)->msix_enabled)
+
+/* Virtio ABI version, this must match exactly */
+#define VIRTIO_PCI_ABI_VERSION		0
+
+/* How many bits to shift physical queue address written to QUEUE_PFN.
+ * 12 is historical, and due to x86 page size. */
+#define VIRTIO_PCI_QUEUE_ADDR_SHIFT	12
+
+/* The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize again. */
+#define VIRTIO_PCI_VRING_ALIGN		4096
+#endif
-- 
MST