From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Anthony Liguori <aliguori@us.ibm.com>,
Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PATCH v2 06/11] virtio-balloon: switch to linux-headers
Date: Sun, 26 May 2013 18:23:14 +0300 [thread overview]
Message-ID: <1369581694-1655-7-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1369581694-1655-1-git-send-email-mst@redhat.com>
It's easier to keep everything in sync if
we just use linux headers for virtio constants.
Add virtio_balloon.h header from linux 3.10-rc1, and
remove duplicate symbols from virtio-balloon.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio/virtio-balloon.c | 2 +-
include/hw/virtio/virtio-balloon.h | 37 ++--------------------
| 59 ++++++++++++++++++++++++++++++++++++
3 files changed, 63 insertions(+), 35 deletions(-)
create mode 100644 linux-headers/linux/virtio_balloon.h
diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
index d669756..548508b 100644
--- a/hw/virtio/virtio-balloon.c
+++ b/hw/virtio/virtio-balloon.c
@@ -216,7 +216,7 @@ static void virtio_balloon_receive_stats(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
VirtQueueElement *elem = &s->stats_vq_elem;
- VirtIOBalloonStat stat;
+ struct virtio_balloon_stat stat;
size_t offset = 0;
qemu_timeval tv;
diff --git a/include/hw/virtio/virtio-balloon.h b/include/hw/virtio/virtio-balloon.h
index f863bfe..dc0702d 100644
--- a/include/hw/virtio/virtio-balloon.h
+++ b/include/hw/virtio/virtio-balloon.h
@@ -17,45 +17,14 @@
#include "hw/virtio/virtio.h"
#include "hw/pci/pci.h"
+#include "linux/virtio_balloon.h"
+#include "linux/virtio_ids.h"
+
#define TYPE_VIRTIO_BALLOON "virtio-balloon-device"
#define VIRTIO_BALLOON(obj) \
OBJECT_CHECK(VirtIOBalloon, (obj), TYPE_VIRTIO_BALLOON)
-/* from Linux's linux/virtio_balloon.h */
-
-/* The ID for virtio_balloon */
-#define VIRTIO_ID_BALLOON 5
-
-/* The feature bitmap for virtio balloon */
-#define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */
-#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory stats virtqueue */
-
-/* Size of a PFN in the balloon interface. */
-#define VIRTIO_BALLOON_PFN_SHIFT 12
-
-struct virtio_balloon_config
-{
- /* Number of pages host wants Guest to give up. */
- uint32_t num_pages;
- /* Number of pages we've actually got in balloon. */
- uint32_t actual;
-};
-
-/* Memory Statistics */
-#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */
-#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */
-#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */
-#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */
-#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */
-#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */
-#define VIRTIO_BALLOON_S_NR 6
-
-typedef struct VirtIOBalloonStat {
- uint16_t tag;
- uint64_t val;
-} QEMU_PACKED VirtIOBalloonStat;
-
typedef struct VirtIOBalloon {
VirtIODevice parent_obj;
VirtQueue *ivq, *dvq, *svq;
--git a/linux-headers/linux/virtio_balloon.h b/linux-headers/linux/virtio_balloon.h
new file mode 100644
index 0000000..5e26f61
--- /dev/null
+++ b/linux-headers/linux/virtio_balloon.h
@@ -0,0 +1,59 @@
+#ifndef _LINUX_VIRTIO_BALLOON_H
+#define _LINUX_VIRTIO_BALLOON_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* The feature bitmap for virtio balloon */
+#define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */
+#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */
+
+/* Size of a PFN in the balloon interface. */
+#define VIRTIO_BALLOON_PFN_SHIFT 12
+
+struct virtio_balloon_config
+{
+ /* Number of pages host wants Guest to give up. */
+ __le32 num_pages;
+ /* Number of pages we've actually got in balloon. */
+ __le32 actual;
+};
+
+#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */
+#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */
+#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */
+#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */
+#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */
+#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */
+#define VIRTIO_BALLOON_S_NR 6
+
+struct virtio_balloon_stat {
+ __u16 tag;
+ __u64 val;
+} __attribute__((packed));
+
+#endif /* _LINUX_VIRTIO_BALLOON_H */
--
MST
next prev parent reply other threads:[~2013-05-26 15:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-26 15:22 [Qemu-devel] [PATCH v2 00/11] qemu: use virtio linux headers in portable code Michael S. Tsirkin
2013-05-26 15:22 ` [Qemu-devel] [PATCH v2 01/11] make: pull in linux-headers on all platforms Michael S. Tsirkin
2013-05-26 15:22 ` [Qemu-devel] [PATCH v2 02/11] scripts/update-linux-headers.sh: add virtio Michael S. Tsirkin
2013-05-26 15:22 ` [Qemu-devel] [PATCH v2 03/11] virtio-9p: switch to linux-headers Michael S. Tsirkin
2013-05-26 15:23 ` [Qemu-devel] [PATCH v2 04/11] virtio-net, eth: use linux-headers Michael S. Tsirkin
2013-05-26 15:23 ` [Qemu-devel] [PATCH v2 05/11] virtio-blk: switch to linux-headers Michael S. Tsirkin
2013-05-26 15:23 ` Michael S. Tsirkin [this message]
2013-05-26 15:23 ` [Qemu-devel] [PATCH v2 07/11] virtio-rng: " Michael S. Tsirkin
2013-05-26 15:23 ` [Qemu-devel] [PATCH v2 08/11] virtio-console: " Michael S. Tsirkin
2013-05-26 15:23 ` [Qemu-devel] [PATCH v2 09/11] virtio: add virtio_ids from linux-headers Michael S. Tsirkin
2013-05-26 15:23 ` [Qemu-devel] [PATCH v2 10/11] virtio-pci: switch to linux-headers Michael S. Tsirkin
2013-05-26 15:23 ` [Qemu-devel] [PATCH v2 11/11] virtio: use ring structure from linux-headers Michael S. Tsirkin
2013-05-26 15:43 ` [Qemu-devel] [PATCH v2 00/11] qemu: use virtio linux headers in portable code Peter Maydell
2013-05-26 17:51 ` Michael S. Tsirkin
2013-05-26 18:00 ` Peter Maydell
2013-05-26 18:10 ` Michael S. Tsirkin
2013-05-26 18:26 ` Paolo Bonzini
2013-05-26 18:37 ` Michael S. Tsirkin
2013-05-26 18:53 ` Paolo Bonzini
2013-05-26 20:02 ` Michael S. Tsirkin
2013-05-26 20:20 ` Paolo Bonzini
2013-05-26 20:49 ` Anthony Liguori
2013-05-26 21:42 ` Michael S. Tsirkin
2013-05-27 0:55 ` Anthony Liguori
2013-05-27 15:02 ` Michael S. Tsirkin
2013-05-27 16:14 ` Anthony Liguori
2013-05-28 6:23 ` Michael S. Tsirkin
2013-05-29 0:14 ` Rusty Russell
2013-05-29 13:05 ` Anthony Liguori
2013-05-29 14:09 ` Michael S. Tsirkin
2013-05-29 14:58 ` Anthony Liguori
2013-05-27 11:15 ` Rusty Russell
2013-05-28 2:55 ` Anthony Liguori
2013-05-29 0:17 ` Rusty Russell
2013-05-29 5:17 ` Bryan Venteicher
2013-05-27 10:19 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369581694-1655-7-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).