From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCH v3 11/18] pci: Abolish pci_find_root_bus()
Date: Thu, 4 Jul 2013 12:13:12 +0300 [thread overview]
Message-ID: <1372928939-2712-12-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1372928939-2712-1-git-send-email-mst@redhat.com>
From: David Gibson <david@gibson.dropbear.id.au>
pci_find_root_bus() takes a domain parameter. Currently PCI root buses
with domain other than 0 can't be created, so this is more or less a long
winded way of retrieving the main PCI root bus. Numbered domains don't
actually properly cover the (non x86) possibilities for multiple PCI root
buses, so this patch for now enforces the domain == 0 restriction in other
places to replace pci_find_root_bus() with an explicit
pci_find_primary_bus().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/pci/pci-hotplug-old.c | 34 +++++++++++++++++++++++++---------
hw/pci/pci.c | 19 +++++++++++++++----
include/hw/pci/pci.h | 2 +-
3 files changed, 41 insertions(+), 14 deletions(-)
diff --git a/hw/pci/pci-hotplug-old.c b/hw/pci/pci-hotplug-old.c
index a0b5558..7a47d6b 100644
--- a/hw/pci/pci-hotplug-old.c
+++ b/hw/pci/pci-hotplug-old.c
@@ -36,17 +36,23 @@
#include "sysemu/blockdev.h"
#include "qapi/error.h"
-static int pci_read_devaddr(Monitor *mon, const char *addr, int *domp,
+static int pci_read_devaddr(Monitor *mon, const char *addr,
int *busp, unsigned *slotp)
{
+ int dom;
+
/* strip legacy tag */
if (!strncmp(addr, "pci_addr=", 9)) {
addr += 9;
}
- if (pci_parse_devaddr(addr, domp, busp, slotp, NULL)) {
+ if (pci_parse_devaddr(addr, &dom, busp, slotp, NULL)) {
monitor_printf(mon, "Invalid pci address\n");
return -1;
}
+ if (dom != 0) {
+ monitor_printf(mon, "Multiple PCI domains not supported, use device_add\n");
+ return -1;
+ }
return 0;
}
@@ -128,18 +134,22 @@ static int scsi_hot_add(Monitor *mon, DeviceState *adapter,
int pci_drive_hot_add(Monitor *mon, const QDict *qdict, DriveInfo *dinfo)
{
- int dom, pci_bus;
+ int pci_bus;
unsigned slot;
+ PCIBus *root = pci_find_primary_bus();
PCIDevice *dev;
const char *pci_addr = qdict_get_str(qdict, "pci_addr");
switch (dinfo->type) {
case IF_SCSI:
- if (pci_read_devaddr(mon, pci_addr, &dom, &pci_bus, &slot)) {
+ if (!root) {
+ monitor_printf(mon, "no primary PCI bus\n");
+ goto err;
+ }
+ if (pci_read_devaddr(mon, pci_addr, &pci_bus, &slot)) {
goto err;
}
- dev = pci_find_device(pci_find_root_bus(dom), pci_bus,
- PCI_DEVFN(slot, 0));
+ dev = pci_find_device(root, pci_bus, PCI_DEVFN(slot, 0));
if (!dev) {
monitor_printf(mon, "no pci device with address %s\n", pci_addr);
goto err;
@@ -275,16 +285,22 @@ void pci_device_hot_add(Monitor *mon, const QDict *qdict)
static int pci_device_hot_remove(Monitor *mon, const char *pci_addr)
{
+ PCIBus *root = pci_find_primary_bus();
PCIDevice *d;
- int dom, bus;
+ int bus;
unsigned slot;
Error *local_err = NULL;
- if (pci_read_devaddr(mon, pci_addr, &dom, &bus, &slot)) {
+ if (!root) {
+ monitor_printf(mon, "no primary PCI bus\n");
+ return -1;
+ }
+
+ if (pci_read_devaddr(mon, pci_addr, &bus, &slot)) {
return -1;
}
- d = pci_find_device(pci_find_root_bus(dom), bus, PCI_DEVFN(slot, 0));
+ d = pci_find_device(root, bus, PCI_DEVFN(slot, 0));
if (!d) {
monitor_printf(mon, "slot %d empty\n", slot);
return -1;
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index adf4da5..fc99e3b 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -246,12 +246,12 @@ static void pci_host_bus_register(int domain, PCIBus *bus)
QLIST_INSERT_HEAD(&host_buses, host, next);
}
-PCIBus *pci_find_root_bus(int domain)
+PCIBus *pci_find_primary_bus(void)
{
struct PCIHostBus *host;
QLIST_FOREACH(host, &host_buses, next) {
- if (host->domain == domain) {
+ if (host->domain == 0) {
return host->bus;
}
}
@@ -583,20 +583,31 @@ int pci_parse_devaddr(const char *addr, int *domp, int *busp,
PCIBus *pci_get_bus_devfn(int *devfnp, const char *devaddr)
{
+ PCIBus *root = pci_find_primary_bus();
int dom, bus;
unsigned slot;
+ if (!root) {
+ fprintf(stderr, "No primary PCI bus\n");
+ return NULL;
+ }
+
if (!devaddr) {
*devfnp = -1;
- return pci_find_bus_nr(pci_find_root_bus(0), 0);
+ return pci_find_bus_nr(root, 0);
}
if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
return NULL;
}
+ if (dom != 0) {
+ fprintf(stderr, "No support for non-zero PCI domains\n");
+ return NULL;
+ }
+
*devfnp = PCI_DEVFN(slot, 0);
- return pci_find_bus_nr(pci_find_root_bus(dom), bus);
+ return pci_find_bus_nr(root, bus);
}
static void pci_init_cmask(PCIDevice *dev)
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index b5edef8..7b89d88 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -389,7 +389,7 @@ int pci_bus_num(PCIBus *s);
void pci_for_each_device(PCIBus *bus, int bus_num,
void (*fn)(PCIBus *bus, PCIDevice *d, void *opaque),
void *opaque);
-PCIBus *pci_find_root_bus(int domain);
+PCIBus *pci_find_primary_bus(void);
int pci_find_domain(const PCIBus *bus);
PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn);
int pci_qdev_find_device(const char *id, PCIDevice **pdev);
--
MST
next prev parent reply other threads:[~2013-07-04 9:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-04 9:12 [Qemu-devel] [PULL v3 00/18] pci,misc enhancements Michael S. Tsirkin
2013-07-04 9:12 ` [Qemu-devel] [PATCH v3 01/18] range: add Range structure Michael S. Tsirkin
2013-07-04 9:12 ` [Qemu-devel] [PATCH v3 02/18] pci: store PCI hole ranges in guestinfo structure Michael S. Tsirkin
2013-07-04 9:12 ` [Qemu-devel] [PATCH v3 03/18] pc: pass PCI hole ranges to Guests Michael S. Tsirkin
2013-07-04 9:12 ` [Qemu-devel] [PATCH v3 04/18] pc_piix: cleanup init compat handling Michael S. Tsirkin
2013-07-04 9:12 ` [Qemu-devel] [PATCH v3 05/18] e1000: cleanup process_tx_desc Michael S. Tsirkin
2013-07-04 9:12 ` [Qemu-devel] [PATCH v3 06/18] MAINTAINERS: s/Marcelo/Paolo/ Michael S. Tsirkin
2013-07-04 9:12 ` [Qemu-devel] [PATCH v3 07/18] pvpanic: initialization cleanup Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 08/18] pvpanic: fix fwcfg for big endian hosts Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 09/18] pci: Cleanup configuration for pci-hotplug.c Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 10/18] pci: Move pci_read_devaddr to pci-hotplug-old.c Michael S. Tsirkin
2013-07-04 9:13 ` Michael S. Tsirkin [this message]
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 12/18] pci: Use helper to find device's root bus in pci_find_domain() Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 13/18] pci: Replace pci_find_domain() with more general pci_root_bus_path() Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 14/18] pci: Add root bus argument to pci_get_bus_devfn() Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 15/18] pci: Add root bus parameter to pci_nic_init() Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 16/18] pci: Simpler implementation of primary PCI bus Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 17/18] pci: Remove domain from PCIHostBus Michael S. Tsirkin
2013-07-04 9:13 ` [Qemu-devel] [PATCH v3 18/18] pci: Fold host_buses list into PCIHostState functionality Michael S. Tsirkin
2013-07-07 16:27 ` [Qemu-devel] [PULL v3 00/18] pci,misc enhancements Anthony Liguori
2013-07-07 20:08 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372928939-2712-12-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).