[Qemu-devel] [PULL 1/5] hw/alpha: Don't use get_system_io

[Richard Henderson <rth@twiddle.net>]

Advancements in the ioport subsystem mean that we need no longer
thunk memory-mapped i/o through the system-io address space.

Signed-off-by: Richard Henderson <rth@twiddle.net>
---
 hw/alpha/alpha_sys.h |  1 -
 hw/alpha/pci.c       | 44 --------------------------------------------
 hw/alpha/typhoon.c   | 20 ++++++++------------
 3 files changed, 8 insertions(+), 57 deletions(-)

diff --git a/hw/alpha/alpha_sys.h b/hw/alpha/alpha_sys.h
index 50e7730..0987851 100644
--- a/hw/alpha/alpha_sys.h
+++ b/hw/alpha/alpha_sys.h
@@ -14,7 +14,6 @@ PCIBus *typhoon_init(ram_addr_t, ISABus **, qemu_irq *, AlphaCPU *[4],
                      pci_map_irq_fn);
 
 /* alpha_pci.c.  */
-extern const MemoryRegionOps alpha_pci_bw_io_ops;
 extern const MemoryRegionOps alpha_pci_conf1_ops;
 extern const MemoryRegionOps alpha_pci_iack_ops;
 
diff --git a/hw/alpha/pci.c b/hw/alpha/pci.c
index 7327d48..25637e0 100644
--- a/hw/alpha/pci.c
+++ b/hw/alpha/pci.c
@@ -12,50 +12,6 @@
 #include "sysemu/sysemu.h"
 
 
-/* PCI IO reads/writes, to byte-word addressable memory.  */
-/* ??? Doesn't handle multiple PCI busses.  */
-
-static uint64_t bw_io_read(void *opaque, hwaddr addr, unsigned size)
-{
-    switch (size) {
-    case 1:
-        return cpu_inb(addr);
-    case 2:
-        return cpu_inw(addr);
-    case 4:
-        return cpu_inl(addr);
-    }
-    abort();
-}
-
-static void bw_io_write(void *opaque, hwaddr addr,
-                        uint64_t val, unsigned size)
-{
-    switch (size) {
-    case 1:
-        cpu_outb(addr, val);
-        break;
-    case 2:
-        cpu_outw(addr, val);
-        break;
-    case 4:
-        cpu_outl(addr, val);
-        break;
-    default:
-        abort();
-    }
-}
-
-const MemoryRegionOps alpha_pci_bw_io_ops = {
-    .read = bw_io_read,
-    .write = bw_io_write,
-    .endianness = DEVICE_LITTLE_ENDIAN,
-    .impl = {
-        .min_access_size = 1,
-        .max_access_size = 4,
-    },
-};
-
 /* PCI config space reads/writes, to byte-word addressable memory.  */
 static uint64_t bw_conf1_read(void *opaque, hwaddr addr,
                               unsigned size)
diff --git a/hw/alpha/typhoon.c b/hw/alpha/typhoon.c
index 1c3ac8e..9dac9df 100644
--- a/hw/alpha/typhoon.c
+++ b/hw/alpha/typhoon.c
@@ -705,7 +705,6 @@ PCIBus *typhoon_init(ram_addr_t ram_size, ISABus **isa_bus,
     const uint64_t MB = 1024 * 1024;
     const uint64_t GB = 1024 * MB;
     MemoryRegion *addr_space = get_system_memory();
-    MemoryRegion *addr_space_io = get_system_io();
     DeviceState *dev;
     TyphoonState *s;
     PCIHostState *phb;
@@ -765,28 +764,25 @@ PCIBus *typhoon_init(ram_addr_t ram_size, ISABus **isa_bus,
                                 &s->pchip.reg_mem);
 
     /* Pchip0 PCI I/O, 0x801.FC00.0000, 32MB.  */
-    /* ??? Ideally we drop the "system" i/o space on the floor and give the
-       PCI subsystem the full address space reserved by the chipset.
-       We can't do that until the MEM and IO paths in memory.c are unified.  */
-    memory_region_init_io(&s->pchip.reg_io, OBJECT(s), &alpha_pci_bw_io_ops,
-                          NULL, "pci0-io", 32*MB);
+    memory_region_init(&s->pchip.reg_io, OBJECT(s), "pci0-io", 32*MB);
     memory_region_add_subregion(addr_space, 0x801fc000000ULL,
                                 &s->pchip.reg_io);
 
     b = pci_register_bus(dev, "pci",
                          typhoon_set_irq, sys_map_irq, s,
-                         &s->pchip.reg_mem, addr_space_io, 0, 64, TYPE_PCI_BUS);
+                         &s->pchip.reg_mem, &s->pchip.reg_io,
+                         0, 64, TYPE_PCI_BUS);
     phb->bus = b;
 
     /* Pchip0 PCI special/interrupt acknowledge, 0x801.F800.0000, 64MB.  */
-    memory_region_init_io(&s->pchip.reg_iack, OBJECT(s), &alpha_pci_iack_ops, b,
-                          "pci0-iack", 64*MB);
+    memory_region_init_io(&s->pchip.reg_iack, OBJECT(s), &alpha_pci_iack_ops,
+                          b, "pci0-iack", 64*MB);
     memory_region_add_subregion(addr_space, 0x801f8000000ULL,
                                 &s->pchip.reg_iack);
 
     /* Pchip0 PCI configuration, 0x801.FE00.0000, 16MB.  */
-    memory_region_init_io(&s->pchip.reg_conf, OBJECT(s), &alpha_pci_conf1_ops, b,
-                          "pci0-conf", 16*MB);
+    memory_region_init_io(&s->pchip.reg_conf, OBJECT(s), &alpha_pci_conf1_ops,
+                          b, "pci0-conf", 16*MB);
     memory_region_add_subregion(addr_space, 0x801fe000000ULL,
                                 &s->pchip.reg_conf);
 
@@ -804,7 +800,7 @@ PCIBus *typhoon_init(ram_addr_t ram_size, ISABus **isa_bus,
     {
         qemu_irq isa_pci_irq, *isa_irqs;
 
-        *isa_bus = isa_bus_new(NULL, addr_space_io);
+        *isa_bus = isa_bus_new(NULL, &s->pchip.reg_io);
         isa_pci_irq = *qemu_allocate_irqs(typhoon_set_isa_irq, s, 1);
         isa_irqs = i8259_init(*isa_bus, isa_pci_irq);
         isa_bus_irqs(*isa_bus, isa_irqs);
-- 
1.8.3.1