From: Peter Maydell <peter.maydell@linaro.org>
To: Anthony Liguori <aliguori@us.ibm.com>
Cc: qemu-devel@nongnu.org, Paul Brook <paul@codesourcery.com>
Subject: [Qemu-devel] [PULL 07/10] vexpress: Make VEDBoardInfo extend arm_boot_info
Date: Mon, 22 Jul 2013 12:43:44 +0100 [thread overview]
Message-ID: <1374493427-3254-8-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1374493427-3254-1-git-send-email-peter.maydell@linaro.org>
Make the VEDBoardInfo struct extend arm_boot_info; this will
allow us to get at the VEDBoardInfo information inside callbacks
from arm/boot code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-8-git-send-email-peter.maydell@linaro.org
---
hw/arm/vexpress.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index 7d1b823..0f15337 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -36,8 +36,6 @@
#define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024)
#define VEXPRESS_FLASH_SECT_SIZE (256 * 1024)
-static struct arm_boot_info vexpress_binfo;
-
/* Address maps for peripherals:
* the Versatile Express motherboard has two possible maps,
* the "legacy" one (used for A9) and the "Cortex-A Series"
@@ -153,6 +151,7 @@ typedef void DBoardInitFn(const VEDBoardInfo *daughterboard,
qemu_irq *pic);
struct VEDBoardInfo {
+ struct arm_boot_info bootinfo;
const hwaddr *motherboard_map;
hwaddr loader_start;
const hwaddr gic_cpu_if_addr;
@@ -272,7 +271,7 @@ static const uint32_t a9_clocks[] = {
66670000, /* Test chip reference clock: 66.67MHz */
};
-static const VEDBoardInfo a9_daughterboard = {
+static VEDBoardInfo a9_daughterboard = {
.motherboard_map = motherboard_legacy_map,
.loader_start = 0x60000000,
.gic_cpu_if_addr = 0x1e000100,
@@ -384,7 +383,7 @@ static const uint32_t a15_clocks[] = {
40000000, /* OSCCLK8: 40MHz : DDR2 PLL reference */
};
-static const VEDBoardInfo a15_daughterboard = {
+static VEDBoardInfo a15_daughterboard = {
.motherboard_map = motherboard_aseries_map,
.loader_start = 0x80000000,
.gic_cpu_if_addr = 0x2c002000,
@@ -396,7 +395,7 @@ static const VEDBoardInfo a15_daughterboard = {
.init = a15_daughterboard_init,
};
-static void vexpress_common_init(const VEDBoardInfo *daughterboard,
+static void vexpress_common_init(VEDBoardInfo *daughterboard,
QEMUMachineInitArgs *args)
{
DeviceState *dev, *sysctl, *pl041;
@@ -524,17 +523,17 @@ static void vexpress_common_init(const VEDBoardInfo *daughterboard,
/* VE_DAPROM: not modelled */
- vexpress_binfo.ram_size = args->ram_size;
- vexpress_binfo.kernel_filename = args->kernel_filename;
- vexpress_binfo.kernel_cmdline = args->kernel_cmdline;
- vexpress_binfo.initrd_filename = args->initrd_filename;
- vexpress_binfo.nb_cpus = smp_cpus;
- vexpress_binfo.board_id = VEXPRESS_BOARD_ID;
- vexpress_binfo.loader_start = daughterboard->loader_start;
- vexpress_binfo.smp_loader_start = map[VE_SRAM];
- vexpress_binfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
- vexpress_binfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
- arm_load_kernel(ARM_CPU(first_cpu), &vexpress_binfo);
+ daughterboard->bootinfo.ram_size = args->ram_size;
+ daughterboard->bootinfo.kernel_filename = args->kernel_filename;
+ daughterboard->bootinfo.kernel_cmdline = args->kernel_cmdline;
+ daughterboard->bootinfo.initrd_filename = args->initrd_filename;
+ daughterboard->bootinfo.nb_cpus = smp_cpus;
+ daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID;
+ daughterboard->bootinfo.loader_start = daughterboard->loader_start;
+ daughterboard->bootinfo.smp_loader_start = map[VE_SRAM];
+ daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
+ daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
+ arm_load_kernel(ARM_CPU(first_cpu), &daughterboard->bootinfo);
}
static void vexpress_a9_init(QEMUMachineInitArgs *args)
--
1.7.9.5
next prev parent reply other threads:[~2013-07-22 12:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 11:43 [Qemu-devel] [PULL 00/10] arm-devs queue Peter Maydell
2013-07-22 11:43 ` [Qemu-devel] [PULL 01/10] device_tree: Add qemu_devtree_setprop_sized_cells() utility functions Peter Maydell
2013-07-22 11:43 ` [Qemu-devel] [PULL 02/10] arm/boot: Use qemu_devtree_setprop_sized_cells() Peter Maydell
2013-07-22 11:43 ` [Qemu-devel] [PULL 03/10] virtio: Add support for guest setting of queue size Peter Maydell
2013-07-22 11:43 ` [Qemu-devel] [PULL 04/10] virtio: Support transports which can specify the vring alignment Peter Maydell
2013-07-22 11:43 ` [Qemu-devel] [PULL 05/10] virtio: Implement MMIO based virtio transport Peter Maydell
2013-07-22 11:43 ` [Qemu-devel] [PULL 06/10] arm/boot: Allow boards to modify the FDT blob Peter Maydell
2013-07-22 11:43 ` Peter Maydell [this message]
2013-07-22 11:43 ` [Qemu-devel] [PULL 08/10] vexpress: Add virtio-mmio transports Peter Maydell
2013-07-22 11:43 ` [Qemu-devel] [PULL 09/10] hw/loader: Support ramdisk with u-boot header Peter Maydell
2013-07-22 11:43 ` [Qemu-devel] [PULL 10/10] hw/arm: Use 'load_ramdisk()' for loading ramdisks w/ U-Boot header Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374493427-3254-8-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=aliguori@us.ibm.com \
--cc=paul@codesourcery.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).