From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: gnatapov@redhat.com, ehabkost@redhat.com, afaerber@suse.de
Subject: [Qemu-devel] [PATCH v2 1/2] target-i386: remove tabs from target-i386/cpu.h
Date: Thu, 25 Jul 2013 17:05:21 +0200 [thread overview]
Message-ID: <1374764722-10685-2-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1374764722-10685-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target-i386/cpu.h | 192 +++++++++++++++++++++++++++---------------------------
1 file changed, 96 insertions(+), 96 deletions(-)
diff --git a/target-i386/cpu.h b/target-i386/cpu.h
index cedefdc..d19d111 100644
--- a/target-i386/cpu.h
+++ b/target-i386/cpu.h
@@ -37,9 +37,9 @@
#define TARGET_HAS_ICE 1
#ifdef TARGET_X86_64
-#define ELF_MACHINE EM_X86_64
+#define ELF_MACHINE EM_X86_64
#else
-#define ELF_MACHINE EM_386
+#define ELF_MACHINE EM_386
#endif
#define CPUArchState struct CPUX86State
@@ -98,10 +98,10 @@
#define DESC_TSS_BUSY_MASK (1 << 9)
/* eflags masks */
-#define CC_C 0x0001
-#define CC_P 0x0004
-#define CC_A 0x0010
-#define CC_Z 0x0040
+#define CC_C 0x0001
+#define CC_P 0x0004
+#define CC_A 0x0010
+#define CC_Z 0x0040
#define CC_S 0x0080
#define CC_O 0x0800
@@ -109,14 +109,14 @@
#define IOPL_SHIFT 12
#define VM_SHIFT 17
-#define TF_MASK 0x00000100
-#define IF_MASK 0x00000200
-#define DF_MASK 0x00000400
-#define IOPL_MASK 0x00003000
-#define NT_MASK 0x00004000
-#define RF_MASK 0x00010000
-#define VM_MASK 0x00020000
-#define AC_MASK 0x00040000
+#define TF_MASK 0x00000100
+#define IF_MASK 0x00000200
+#define DF_MASK 0x00000400
+#define IOPL_MASK 0x00003000
+#define NT_MASK 0x00004000
+#define RF_MASK 0x00010000
+#define VM_MASK 0x00020000
+#define AC_MASK 0x00040000
#define VIF_MASK 0x00080000
#define VIP_MASK 0x00100000
#define ID_MASK 0x00200000
@@ -238,28 +238,28 @@
#define DR7_TYPE_IO_RW 0x2
#define DR7_TYPE_DATA_RW 0x3
-#define PG_PRESENT_BIT 0
-#define PG_RW_BIT 1
-#define PG_USER_BIT 2
-#define PG_PWT_BIT 3
-#define PG_PCD_BIT 4
-#define PG_ACCESSED_BIT 5
-#define PG_DIRTY_BIT 6
-#define PG_PSE_BIT 7
-#define PG_GLOBAL_BIT 8
-#define PG_NX_BIT 63
+#define PG_PRESENT_BIT 0
+#define PG_RW_BIT 1
+#define PG_USER_BIT 2
+#define PG_PWT_BIT 3
+#define PG_PCD_BIT 4
+#define PG_ACCESSED_BIT 5
+#define PG_DIRTY_BIT 6
+#define PG_PSE_BIT 7
+#define PG_GLOBAL_BIT 8
+#define PG_NX_BIT 63
#define PG_PRESENT_MASK (1 << PG_PRESENT_BIT)
-#define PG_RW_MASK (1 << PG_RW_BIT)
-#define PG_USER_MASK (1 << PG_USER_BIT)
-#define PG_PWT_MASK (1 << PG_PWT_BIT)
-#define PG_PCD_MASK (1 << PG_PCD_BIT)
+#define PG_RW_MASK (1 << PG_RW_BIT)
+#define PG_USER_MASK (1 << PG_USER_BIT)
+#define PG_PWT_MASK (1 << PG_PWT_BIT)
+#define PG_PCD_MASK (1 << PG_PCD_BIT)
#define PG_ACCESSED_MASK (1 << PG_ACCESSED_BIT)
-#define PG_DIRTY_MASK (1 << PG_DIRTY_BIT)
-#define PG_PSE_MASK (1 << PG_PSE_BIT)
-#define PG_GLOBAL_MASK (1 << PG_GLOBAL_BIT)
+#define PG_DIRTY_MASK (1 << PG_DIRTY_BIT)
+#define PG_PSE_MASK (1 << PG_PSE_BIT)
+#define PG_GLOBAL_MASK (1 << PG_GLOBAL_BIT)
#define PG_HI_USER_MASK 0x7ff0000000000000LL
-#define PG_NX_MASK (1LL << PG_NX_BIT)
+#define PG_NX_MASK (1LL << PG_NX_BIT)
#define PG_ERROR_W_BIT 1
@@ -269,32 +269,32 @@
#define PG_ERROR_RSVD_MASK 0x08
#define PG_ERROR_I_D_MASK 0x10
-#define MCG_CTL_P (1ULL<<8) /* MCG_CAP register available */
-#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
+#define MCG_CTL_P (1ULL<<8) /* MCG_CAP register available */
+#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
-#define MCE_CAP_DEF (MCG_CTL_P|MCG_SER_P)
-#define MCE_BANKS_DEF 10
+#define MCE_CAP_DEF (MCG_CTL_P|MCG_SER_P)
+#define MCE_BANKS_DEF 10
-#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
-#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
-#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
+#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
+#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
+#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
-#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
-#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
-#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
-#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
-#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
-#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
-#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
-#define MCI_STATUS_AR (1ULL<<55) /* Action required */
+#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
+#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
+#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
+#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
+#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
+#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
+#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
+#define MCI_STATUS_AR (1ULL<<55) /* Action required */
/* MISC register defines */
-#define MCM_ADDR_SEGOFF 0 /* segment offset */
-#define MCM_ADDR_LINEAR 1 /* linear address */
-#define MCM_ADDR_PHYS 2 /* physical address */
-#define MCM_ADDR_MEM 3 /* memory address */
-#define MCM_ADDR_GENERIC 7 /* generic */
+#define MCM_ADDR_SEGOFF 0 /* segment offset */
+#define MCM_ADDR_LINEAR 1 /* linear address */
+#define MCM_ADDR_PHYS 2 /* physical address */
+#define MCM_ADDR_MEM 3 /* memory address */
+#define MCM_ADDR_GENERIC 7 /* generic */
#define MSR_IA32_TSC 0x10
#define MSR_IA32_APICBASE 0x1b
@@ -304,10 +304,10 @@
#define MSR_TSC_ADJUST 0x0000003b
#define MSR_IA32_TSCDEADLINE 0x6e0
-#define MSR_MTRRcap 0xfe
-#define MSR_MTRRcap_VCNT 8
-#define MSR_MTRRcap_FIXRANGE_SUPPORT (1 << 8)
-#define MSR_MTRRcap_WC_SUPPORTED (1 << 10)
+#define MSR_MTRRcap 0xfe
+#define MSR_MTRRcap_VCNT 8
+#define MSR_MTRRcap_FIXRANGE_SUPPORT (1 << 8)
+#define MSR_MTRRcap_WC_SUPPORTED (1 << 10)
#define MSR_IA32_SYSENTER_CS 0x174
#define MSR_IA32_SYSENTER_ESP 0x175
@@ -319,33 +319,33 @@
#define MSR_IA32_PERF_STATUS 0x198
-#define MSR_IA32_MISC_ENABLE 0x1a0
+#define MSR_IA32_MISC_ENABLE 0x1a0
/* Indicates good rep/movs microcode on some processors: */
#define MSR_IA32_MISC_ENABLE_DEFAULT 1
-#define MSR_MTRRphysBase(reg) (0x200 + 2 * (reg))
-#define MSR_MTRRphysMask(reg) (0x200 + 2 * (reg) + 1)
-
-#define MSR_MTRRfix64K_00000 0x250
-#define MSR_MTRRfix16K_80000 0x258
-#define MSR_MTRRfix16K_A0000 0x259
-#define MSR_MTRRfix4K_C0000 0x268
-#define MSR_MTRRfix4K_C8000 0x269
-#define MSR_MTRRfix4K_D0000 0x26a
-#define MSR_MTRRfix4K_D8000 0x26b
-#define MSR_MTRRfix4K_E0000 0x26c
-#define MSR_MTRRfix4K_E8000 0x26d
-#define MSR_MTRRfix4K_F0000 0x26e
-#define MSR_MTRRfix4K_F8000 0x26f
+#define MSR_MTRRphysBase(reg) (0x200 + 2 * (reg))
+#define MSR_MTRRphysMask(reg) (0x200 + 2 * (reg) + 1)
+
+#define MSR_MTRRfix64K_00000 0x250
+#define MSR_MTRRfix16K_80000 0x258
+#define MSR_MTRRfix16K_A0000 0x259
+#define MSR_MTRRfix4K_C0000 0x268
+#define MSR_MTRRfix4K_C8000 0x269
+#define MSR_MTRRfix4K_D0000 0x26a
+#define MSR_MTRRfix4K_D8000 0x26b
+#define MSR_MTRRfix4K_E0000 0x26c
+#define MSR_MTRRfix4K_E8000 0x26d
+#define MSR_MTRRfix4K_F0000 0x26e
+#define MSR_MTRRfix4K_F8000 0x26f
#define MSR_PAT 0x277
-#define MSR_MTRRdefType 0x2ff
+#define MSR_MTRRdefType 0x2ff
-#define MSR_MC0_CTL 0x400
-#define MSR_MC0_STATUS 0x401
-#define MSR_MC0_ADDR 0x402
-#define MSR_MC0_MISC 0x403
+#define MSR_MC0_CTL 0x400
+#define MSR_MC0_STATUS 0x401
+#define MSR_MC0_ADDR 0x402
+#define MSR_MC0_MISC 0x403
#define MSR_EFER 0xc0000080
@@ -549,24 +549,24 @@ typedef uint32_t FeatureWordArray[FEATURE_WORDS];
#define CPUID_MWAIT_IBE (1 << 1) /* Interrupts can exit capability */
#define CPUID_MWAIT_EMX (1 << 0) /* enumeration supported */
-#define EXCP00_DIVZ 0
-#define EXCP01_DB 1
-#define EXCP02_NMI 2
-#define EXCP03_INT3 3
-#define EXCP04_INTO 4
-#define EXCP05_BOUND 5
-#define EXCP06_ILLOP 6
-#define EXCP07_PREX 7
-#define EXCP08_DBLE 8
-#define EXCP09_XERR 9
-#define EXCP0A_TSS 10
-#define EXCP0B_NOSEG 11
-#define EXCP0C_STACK 12
-#define EXCP0D_GPF 13
-#define EXCP0E_PAGE 14
-#define EXCP10_COPR 16
-#define EXCP11_ALGN 17
-#define EXCP12_MCHK 18
+#define EXCP00_DIVZ 0
+#define EXCP01_DB 1
+#define EXCP02_NMI 2
+#define EXCP03_INT3 3
+#define EXCP04_INTO 4
+#define EXCP05_BOUND 5
+#define EXCP06_ILLOP 6
+#define EXCP07_PREX 7
+#define EXCP08_DBLE 8
+#define EXCP09_XERR 9
+#define EXCP0A_TSS 10
+#define EXCP0B_NOSEG 11
+#define EXCP0C_STACK 12
+#define EXCP0D_GPF 13
+#define EXCP0E_PAGE 14
+#define EXCP10_COPR 16
+#define EXCP11_ALGN 17
+#define EXCP12_MCHK 18
#define EXCP_SYSCALL 0x100 /* only happens in user only emulation
for syscall instruction */
@@ -1085,7 +1085,7 @@ static inline CPUX86State *cpu_init(const char *cpu_model)
#define cpu_gen_code cpu_x86_gen_code
#define cpu_signal_handler cpu_x86_signal_handler
#define cpu_list x86_cpu_list
-#define cpudef_setup x86_cpudef_setup
+#define cpudef_setup x86_cpudef_setup
/* MMU modes definitions */
#define MMU_MODE0_SUFFIX _kernel
--
1.8.3.1
next prev parent reply other threads:[~2013-07-25 15:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-25 15:05 [Qemu-devel] [PATCH v2 0/2] kvm: migrate vPMU state Paolo Bonzini
2013-07-25 15:05 ` Paolo Bonzini [this message]
2013-07-25 15:05 ` [Qemu-devel] [PATCH v2 2/2] " Paolo Bonzini
2013-07-28 12:57 ` Gleb Natapov
2013-07-28 13:51 ` Paolo Bonzini
2013-07-28 13:54 ` Gleb Natapov
2013-07-28 14:07 ` Paolo Bonzini
2013-07-28 14:24 ` Gleb Natapov
2013-08-01 13:03 ` Paolo Bonzini
2013-08-01 13:12 ` Gleb Natapov
2013-08-01 13:48 ` Paolo Bonzini
2013-08-01 13:50 ` Gleb Natapov
2013-07-28 13:03 ` [Qemu-devel] [PATCH v2 0/2] " Andreas Färber
2013-07-28 13:05 ` Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374764722-10685-2-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=afaerber@suse.de \
--cc=ehabkost@redhat.com \
--cc=gnatapov@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).