From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Ping Fan Liu <pingfank@linux.vnet.ibm.com>,
alex@alex.org.uk, Michael Roth <mdroth@linux.vnet.ibm.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PATCH v6 06/18] aio: stop using .io_flush()
Date: Thu, 25 Jul 2013 17:18:13 +0200 [thread overview]
Message-ID: <1374765505-14356-7-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1374765505-14356-1-git-send-email-stefanha@redhat.com>
Now that aio_poll() users check their termination condition themselves,
it is no longer necessary to call .io_flush() handlers.
The behavior of aio_poll() changes as follows:
1. .io_flush() is no longer invoked and file descriptors are *always*
monitored. Previously returning 0 from .io_flush() would skip this file
descriptor.
Due to this change it is essential to check that requests are pending
before calling qemu_aio_wait(). Failure to do so means we block, for
example, waiting for an idle iSCSI socket to become readable when there
are no requests. Currently all qemu_aio_wait()/aio_poll() callers check
before calling.
2. aio_poll() now returns true if progress was made (BH or fd handlers
executed) and false otherwise. Previously it would return true whenever
'busy', which means that .io_flush() returned true. The 'busy' concept
no longer exists so just progress is returned.
Due to this change we need to update tests/test-aio.c which asserts
aio_poll() return values. Note that QEMU doesn't actually rely on these
return values so only tests/test-aio.c cares.
Note that ctx->notifier, the EventNotifier fd used for aio_notify(), is
now handled as a special case. This is a little ugly but maintains
aio_poll() semantics, i.e. aio_notify() does not count as 'progress' and
aio_poll() avoids blocking when the user has not set any fd handlers yet.
Patches after this remove .io_flush() handler code until we can finally
drop the io_flush arguments to aio_set_fd_handler() and friends.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
aio-posix.c | 29 +++++++++--------------------
aio-win32.c | 34 ++++++++++++++--------------------
tests/test-aio.c | 10 +++++-----
3 files changed, 28 insertions(+), 45 deletions(-)
diff --git a/aio-posix.c b/aio-posix.c
index b68eccd..7d66048 100644
--- a/aio-posix.c
+++ b/aio-posix.c
@@ -23,7 +23,6 @@ struct AioHandler
GPollFD pfd;
IOHandler *io_read;
IOHandler *io_write;
- AioFlushHandler *io_flush;
int deleted;
int pollfds_idx;
void *opaque;
@@ -84,7 +83,6 @@ void aio_set_fd_handler(AioContext *ctx,
/* Update handler with latest information */
node->io_read = io_read;
node->io_write = io_write;
- node->io_flush = io_flush;
node->opaque = opaque;
node->pollfds_idx = -1;
@@ -147,7 +145,11 @@ static bool aio_dispatch(AioContext *ctx)
(revents & (G_IO_IN | G_IO_HUP | G_IO_ERR)) &&
node->io_read) {
node->io_read(node->opaque);
- progress = true;
+
+ /* aio_notify() does not count as progress */
+ if (node->opaque != &ctx->notifier) {
+ progress = true;
+ }
}
if (!node->deleted &&
(revents & (G_IO_OUT | G_IO_ERR)) &&
@@ -173,7 +175,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
{
AioHandler *node;
int ret;
- bool busy, progress;
+ bool progress;
progress = false;
@@ -200,20 +202,8 @@ bool aio_poll(AioContext *ctx, bool blocking)
g_array_set_size(ctx->pollfds, 0);
/* fill pollfds */
- busy = false;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
node->pollfds_idx = -1;
-
- /* If there aren't pending AIO operations, don't invoke callbacks.
- * Otherwise, if there are no AIO requests, qemu_aio_wait() would
- * wait indefinitely.
- */
- if (!node->deleted && node->io_flush) {
- if (node->io_flush(node->opaque) == 0) {
- continue;
- }
- busy = true;
- }
if (!node->deleted && node->pfd.events) {
GPollFD pfd = {
.fd = node->pfd.fd,
@@ -226,8 +216,8 @@ bool aio_poll(AioContext *ctx, bool blocking)
ctx->walking_handlers--;
- /* No AIO operations? Get us out of here */
- if (!busy) {
+ /* early return if we only have the aio_notify() fd */
+ if (ctx->pollfds->len == 1) {
return progress;
}
@@ -250,6 +240,5 @@ bool aio_poll(AioContext *ctx, bool blocking)
}
}
- assert(progress || busy);
- return true;
+ return progress;
}
diff --git a/aio-win32.c b/aio-win32.c
index 38723bf..4309c16 100644
--- a/aio-win32.c
+++ b/aio-win32.c
@@ -23,7 +23,6 @@
struct AioHandler {
EventNotifier *e;
EventNotifierHandler *io_notify;
- AioFlushEventNotifierHandler *io_flush;
GPollFD pfd;
int deleted;
QLIST_ENTRY(AioHandler) node;
@@ -73,7 +72,6 @@ void aio_set_event_notifier(AioContext *ctx,
}
/* Update handler with latest information */
node->io_notify = io_notify;
- node->io_flush = io_flush;
}
aio_notify(ctx);
@@ -96,7 +94,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
{
AioHandler *node;
HANDLE events[MAXIMUM_WAIT_OBJECTS + 1];
- bool busy, progress;
+ bool progress;
int count;
progress = false;
@@ -126,7 +124,11 @@ bool aio_poll(AioContext *ctx, bool blocking)
if (node->pfd.revents && node->io_notify) {
node->pfd.revents = 0;
node->io_notify(node->e);
- progress = true;
+
+ /* aio_notify() does not count as progress */
+ if (node->opaque != &ctx->notifier) {
+ progress = true;
+ }
}
tmp = node;
@@ -147,19 +149,8 @@ bool aio_poll(AioContext *ctx, bool blocking)
ctx->walking_handlers++;
/* fill fd sets */
- busy = false;
count = 0;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
- /* If there aren't pending AIO operations, don't invoke callbacks.
- * Otherwise, if there are no AIO requests, qemu_aio_wait() would
- * wait indefinitely.
- */
- if (!node->deleted && node->io_flush) {
- if (node->io_flush(node->e) == 0) {
- continue;
- }
- busy = true;
- }
if (!node->deleted && node->io_notify) {
events[count++] = event_notifier_get_handle(node->e);
}
@@ -167,8 +158,8 @@ bool aio_poll(AioContext *ctx, bool blocking)
ctx->walking_handlers--;
- /* No AIO operations? Get us out of here */
- if (!busy) {
+ /* early return if we only have the aio_notify() fd */
+ if (count == 1) {
return progress;
}
@@ -196,7 +187,11 @@ bool aio_poll(AioContext *ctx, bool blocking)
event_notifier_get_handle(node->e) == events[ret - WAIT_OBJECT_0] &&
node->io_notify) {
node->io_notify(node->e);
- progress = true;
+
+ /* aio_notify() does not count as progress */
+ if (node->opaque != &ctx->notifier) {
+ progress = true;
+ }
}
tmp = node;
@@ -214,6 +209,5 @@ bool aio_poll(AioContext *ctx, bool blocking)
events[ret - WAIT_OBJECT_0] = events[--count];
}
- assert(progress || busy);
- return true;
+ return progress;
}
diff --git a/tests/test-aio.c b/tests/test-aio.c
index 20bf5e6..1251952 100644
--- a/tests/test-aio.c
+++ b/tests/test-aio.c
@@ -254,7 +254,7 @@ static void test_wait_event_notifier(void)
EventNotifierTestData data = { .n = 0, .active = 1 };
event_notifier_init(&data.e, false);
aio_set_event_notifier(ctx, &data.e, event_ready_cb, event_active_cb);
- g_assert(aio_poll(ctx, false));
+ g_assert(!aio_poll(ctx, false));
g_assert_cmpint(data.n, ==, 0);
g_assert_cmpint(data.active, ==, 1);
@@ -279,7 +279,7 @@ static void test_flush_event_notifier(void)
EventNotifierTestData data = { .n = 0, .active = 10, .auto_set = true };
event_notifier_init(&data.e, false);
aio_set_event_notifier(ctx, &data.e, event_ready_cb, event_active_cb);
- g_assert(aio_poll(ctx, false));
+ g_assert(!aio_poll(ctx, false));
g_assert_cmpint(data.n, ==, 0);
g_assert_cmpint(data.active, ==, 10);
@@ -313,7 +313,7 @@ static void test_wait_event_notifier_noflush(void)
/* Until there is an active descriptor, aio_poll may or may not call
* event_ready_cb. Still, it must not block. */
event_notifier_set(&data.e);
- g_assert(!aio_poll(ctx, true));
+ g_assert(aio_poll(ctx, true));
data.n = 0;
/* An active event notifier forces aio_poll to look at EventNotifiers. */
@@ -323,13 +323,13 @@ static void test_wait_event_notifier_noflush(void)
event_notifier_set(&data.e);
g_assert(aio_poll(ctx, false));
g_assert_cmpint(data.n, ==, 1);
- g_assert(aio_poll(ctx, false));
+ g_assert(!aio_poll(ctx, false));
g_assert_cmpint(data.n, ==, 1);
event_notifier_set(&data.e);
g_assert(aio_poll(ctx, false));
g_assert_cmpint(data.n, ==, 2);
- g_assert(aio_poll(ctx, false));
+ g_assert(!aio_poll(ctx, false));
g_assert_cmpint(data.n, ==, 2);
event_notifier_set(&dummy.e);
--
1.8.1.4
next prev parent reply other threads:[~2013-07-25 15:18 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-25 15:18 [Qemu-devel] [PATCH v6 00/18] aio: drop io_flush() Stefan Hajnoczi
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 01/18] block: ensure bdrv_drain_all() works during bdrv_delete() Stefan Hajnoczi
2013-07-26 6:43 ` Wenchao Xia
2013-08-06 15:06 ` Stefan Hajnoczi
2013-08-07 2:42 ` Wenchao Xia
2013-08-07 7:31 ` Stefan Hajnoczi
2013-08-07 7:42 ` Stefan Hajnoczi
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 02/18] block: stop relying on io_flush() in bdrv_drain_all() Stefan Hajnoczi
2013-07-29 7:01 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 03/18] dataplane/virtio-blk: check exit conditions before aio_poll() Stefan Hajnoczi
2013-07-26 16:44 ` Jeff Cody
2013-07-29 7:10 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 04/18] tests: adjust test-aio to new aio_poll() semantics Stefan Hajnoczi
2013-07-29 7:39 ` Wenchao Xia
2013-07-29 8:24 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 05/18] tests: adjust test-thread-pool " Stefan Hajnoczi
2013-07-29 7:51 ` Wenchao Xia
2013-07-29 14:26 ` Stefan Hajnoczi
2013-07-25 15:18 ` Stefan Hajnoczi [this message]
2013-07-26 16:10 ` [Qemu-devel] [PATCH v6 06/18] aio: stop using .io_flush() Jeff Cody
2013-07-26 16:25 ` Paolo Bonzini
2013-07-26 16:36 ` Jeff Cody
2013-07-26 16:43 ` Jeff Cody
2013-07-29 8:08 ` Wenchao Xia
2013-07-29 14:32 ` Stefan Hajnoczi
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 07/18] block/curl: drop curl_aio_flush() Stefan Hajnoczi
2013-07-29 8:11 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 08/18] block/gluster: drop qemu_gluster_aio_flush_cb() Stefan Hajnoczi
2013-07-29 8:17 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 09/18] block/iscsi: drop iscsi_process_flush() Stefan Hajnoczi
2013-07-29 8:17 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 10/18] block/linux-aio: drop qemu_laio_completion_cb() Stefan Hajnoczi
2013-07-29 8:19 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 11/18] block/nbd: drop nbd_have_request() Stefan Hajnoczi
2013-07-29 8:19 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 12/18] block/rbd: drop qemu_rbd_aio_flush_cb() Stefan Hajnoczi
2013-07-29 8:20 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 13/18] block/sheepdog: drop have_co_req() and aio_flush_request() Stefan Hajnoczi
2013-07-26 5:50 ` MORITA Kazutaka
2013-07-29 8:24 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 14/18] block/ssh: drop return_true() Stefan Hajnoczi
2013-07-29 8:25 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 15/18] dataplane/virtio-blk: drop flush_true() and flush_io() Stefan Hajnoczi
2013-07-29 8:32 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 16/18] thread-pool: drop thread_pool_active() Stefan Hajnoczi
2013-07-29 8:33 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 17/18] tests: drop event_active_cb() Stefan Hajnoczi
2013-07-29 8:34 ` Wenchao Xia
2013-07-25 15:18 ` [Qemu-devel] [PATCH v6 18/18] aio: drop io_flush argument Stefan Hajnoczi
2013-07-29 8:37 ` Wenchao Xia
2013-08-06 15:07 ` [Qemu-devel] [PATCH v6 00/18] aio: drop io_flush() Stefan Hajnoczi
2013-08-09 7:14 ` Wenchao Xia
2013-08-09 8:31 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374765505-14356-7-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=alex@alex.org.uk \
--cc=kwolf@redhat.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=pbonzini@redhat.com \
--cc=pingfank@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).