From: "Andreas Färber" <afaerber@suse.de>
To: qemu-devel@nongnu.org
Cc: "Gerd Hoffmann" <kraxel@redhat.com>,
"Andreas Färber" <afaerber@suse.de>,
"Michael S. Tsirkin" <mst@redhat.com>
Subject: [Qemu-devel] [PATCH qom-next for-next v2 4/6] pci: Unify vmstate_{pci, pcie}_device
Date: Mon, 29 Jul 2013 02:26:59 +0200 [thread overview]
Message-ID: <1375057621-19961-5-git-send-email-afaerber@suse.de> (raw)
In-Reply-To: <1375057621-19961-1-git-send-email-afaerber@suse.de>
The only difference so far is the size of the config space.
It is always used through either VMSTATE_{PCI,PCIE}_DEVICE() or
pci_device_save(), so the name change for PCIe shouldn't matter.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
hw/pci-bridge/ioh3420.c | 2 +-
hw/pci-bridge/xio3130_downstream.c | 2 +-
hw/pci-bridge/xio3130_upstream.c | 2 +-
hw/pci/pci.c | 56 ++++++++++++++++++--------------------
hw/usb/hcd-xhci.c | 2 +-
include/hw/pci/pcie.h | 10 -------
6 files changed, 31 insertions(+), 43 deletions(-)
diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c
index 0657354..680a13d 100644
--- a/hw/pci-bridge/ioh3420.c
+++ b/hw/pci-bridge/ioh3420.c
@@ -187,7 +187,7 @@ static const VMStateDescription vmstate_ioh3420 = {
.minimum_version_id_old = 1,
.post_load = pcie_cap_slot_post_load,
.fields = (VMStateField[]) {
- VMSTATE_PCIE_DEVICE(),
+ VMSTATE_PCI_DEVICE(),
VMSTATE_STRUCT(parent_obj.parent_obj.parent_obj.exp.aer_log,
PCIESlot, 0, vmstate_pcie_aer_log, PCIEAERLog),
VMSTATE_END_OF_LIST()
diff --git a/hw/pci-bridge/xio3130_downstream.c b/hw/pci-bridge/xio3130_downstream.c
index 9022949..3fa4ec2 100644
--- a/hw/pci-bridge/xio3130_downstream.c
+++ b/hw/pci-bridge/xio3130_downstream.c
@@ -154,7 +154,7 @@ static const VMStateDescription vmstate_xio3130_downstream = {
.minimum_version_id_old = 1,
.post_load = pcie_cap_slot_post_load,
.fields = (VMStateField[]) {
- VMSTATE_PCIE_DEVICE(),
+ VMSTATE_PCI_DEVICE(),
VMSTATE_STRUCT(parent_obj.parent_obj.parent_obj.exp.aer_log,
PCIESlot, 0, vmstate_pcie_aer_log, PCIEAERLog),
VMSTATE_END_OF_LIST()
diff --git a/hw/pci-bridge/xio3130_upstream.c b/hw/pci-bridge/xio3130_upstream.c
index 046b790..0edacc3 100644
--- a/hw/pci-bridge/xio3130_upstream.c
+++ b/hw/pci-bridge/xio3130_upstream.c
@@ -133,7 +133,7 @@ static const VMStateDescription vmstate_xio3130_upstream = {
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField[]) {
- VMSTATE_PCIE_DEVICE(),
+ VMSTATE_PCI_DEVICE(),
VMSTATE_STRUCT(parent_obj.parent_obj.exp.aer_log, PCIEPort, 0,
vmstate_pcie_aer_log, PCIEAERLog),
VMSTATE_END_OF_LIST()
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 4c004f5..6461c9d 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -460,6 +460,20 @@ static VMStateInfo vmstate_info_pci_irq_state = {
.put = put_pci_irq_state,
};
+static bool pci_device_express_needed(void *opaque, int version_id)
+{
+ PCIDevice *s = opaque;
+
+ return pci_is_express(s);
+}
+
+static bool pci_device_non_express_needed(void *opaque, int version_id)
+{
+ PCIDevice *s = opaque;
+
+ return !pci_is_express(s);
+}
+
const VMStateDescription vmstate_pci_device = {
.name = "PCIDevice",
.version_id = 2,
@@ -467,38 +481,21 @@ const VMStateDescription vmstate_pci_device = {
.minimum_version_id_old = 1,
.fields = (VMStateField []) {
VMSTATE_INT32_LE(version_id, PCIDevice),
- VMSTATE_BUFFER_UNSAFE_INFO(config, PCIDevice, 0,
- vmstate_info_pci_config,
- PCI_CONFIG_SPACE_SIZE),
- VMSTATE_BUFFER_UNSAFE_INFO(irq_state, PCIDevice, 2,
- vmstate_info_pci_irq_state,
- PCI_NUM_PINS * sizeof(int32_t)),
- VMSTATE_END_OF_LIST()
- }
-};
-
-const VMStateDescription vmstate_pcie_device = {
- .name = "PCIEDevice",
- .version_id = 2,
- .minimum_version_id = 1,
- .minimum_version_id_old = 1,
- .fields = (VMStateField []) {
- VMSTATE_INT32_LE(version_id, PCIDevice),
- VMSTATE_BUFFER_UNSAFE_INFO(config, PCIDevice, 0,
- vmstate_info_pci_config,
- PCIE_CONFIG_SPACE_SIZE),
+ VMSTATE_BUFFER_UNSAFE_INFO_TEST(config, PCIDevice, 0,
+ pci_device_non_express_needed,
+ vmstate_info_pci_config,
+ PCI_CONFIG_SPACE_SIZE),
+ VMSTATE_BUFFER_UNSAFE_INFO_TEST(config, PCIDevice, 0,
+ pci_device_express_needed,
+ vmstate_info_pci_config,
+ PCIE_CONFIG_SPACE_SIZE),
VMSTATE_BUFFER_UNSAFE_INFO(irq_state, PCIDevice, 2,
- vmstate_info_pci_irq_state,
- PCI_NUM_PINS * sizeof(int32_t)),
+ vmstate_info_pci_irq_state,
+ PCI_NUM_PINS * sizeof(int32_t)),
VMSTATE_END_OF_LIST()
}
};
-static inline const VMStateDescription *pci_get_vmstate(PCIDevice *s)
-{
- return pci_is_express(s) ? &vmstate_pcie_device : &vmstate_pci_device;
-}
-
void pci_device_save(PCIDevice *s, QEMUFile *f)
{
/* Clear interrupt status bit: it is implicit
@@ -506,7 +503,7 @@ void pci_device_save(PCIDevice *s, QEMUFile *f)
* This makes us compatible with old devices
* which never set or clear this bit. */
s->config[PCI_STATUS] &= ~PCI_STATUS_INTERRUPT;
- vmstate_save_state(f, pci_get_vmstate(s), s);
+ vmstate_save_state(f, &vmstate_pci_device, s);
/* Restore the interrupt status bit. */
pci_update_irq_status(s);
}
@@ -514,7 +511,8 @@ void pci_device_save(PCIDevice *s, QEMUFile *f)
int pci_device_load(PCIDevice *s, QEMUFile *f)
{
int ret;
- ret = vmstate_load_state(f, pci_get_vmstate(s), s, s->version_id);
+
+ ret = vmstate_load_state(f, &vmstate_pci_device, s, s->version_id);
/* Restore the interrupt status bit. */
pci_update_irq_status(s);
return ret;
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index a22861f..167b58d 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -3544,7 +3544,7 @@ static const VMStateDescription vmstate_xhci = {
.version_id = 1,
.post_load = usb_xhci_post_load,
.fields = (VMStateField[]) {
- VMSTATE_PCIE_DEVICE(),
+ VMSTATE_PCI_DEVICE(),
VMSTATE_MSIX(parent_obj, XHCIState),
VMSTATE_STRUCT_VARRAY_UINT32(ports, XHCIState, numports, 1,
diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h
index fc4ebd3..41e2f8c 100644
--- a/include/hw/pci/pcie.h
+++ b/include/hw/pci/pcie.h
@@ -130,14 +130,4 @@ void pcie_add_capability(PCIDevice *dev,
void pcie_ari_init(PCIDevice *dev, uint16_t offset, uint16_t nextfn);
-extern const VMStateDescription vmstate_pcie_device;
-
-#define VMSTATE_PCIE_DEVICE() { \
- .name = "parent_obj", \
- .size = sizeof(PCIDevice), \
- .vmsd = &vmstate_pcie_device, \
- .flags = VMS_STRUCT, \
- .offset = 0, \
-}
-
#endif /* QEMU_PCIE_H */
--
1.8.1.4
next prev parent reply other threads:[~2013-07-29 0:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-29 0:26 [Qemu-devel] [PATCH qom-next for-next v2 0/6] PCI VMState cleanups Andreas Färber
2013-07-29 0:26 ` [Qemu-devel] [PATCH qom-next for-next v2 1/6] pci: Simplify VMSTATE_PCI_DEVICE() macro Andreas Färber
2013-09-02 11:38 ` Michael S. Tsirkin
2013-07-29 0:26 ` [Qemu-devel] [PATCH qom-next for-next v2 2/6] pci: Simplify VMSTATE_PCIE_DEVICE() macro Andreas Färber
2013-09-02 11:36 ` Michael S. Tsirkin
2013-09-02 11:38 ` Andreas Färber
2013-09-02 11:45 ` Michael S. Tsirkin
2013-07-29 0:26 ` [Qemu-devel] [PATCH qom-next for-next v2 3/6] vmstate: Introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST() Andreas Färber
2013-07-29 0:26 ` Andreas Färber [this message]
2013-07-29 0:27 ` [Qemu-devel] [PATCH qom-next for-next v2 5/6] pci: Move vmstate_pcie_aer_log into vmstate_pci_device Andreas Färber
2013-07-29 0:27 ` [Qemu-devel] [PATCH RFC qom-next for-next v2 6/6] pci: Move VMSTATE_MSIX() " Andreas Färber
2013-09-02 11:31 ` Michael S. Tsirkin
2013-09-02 11:25 ` [Qemu-devel] [PATCH qom-next for-next v2 0/6] PCI VMState cleanups Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375057621-19961-5-git-send-email-afaerber@suse.de \
--to=afaerber@suse.de \
--cc=kraxel@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).