From: Liu Ping Fan <qemulist@gmail.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Jan Kiszka <jan.kiszka@siemens.com>,
Alex Bligh <alex@alex.org.uk>,
Anthony Liguori <anthony@codemonkey.ws>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [RFC v2 1/5] timer: protect timers_state with lock
Date: Mon, 29 Jul 2013 11:16:04 +0800 [thread overview]
Message-ID: <1375067768-11342-2-git-send-email-pingfank@linux.vnet.ibm.com> (raw)
In-Reply-To: <1375067768-11342-1-git-send-email-pingfank@linux.vnet.ibm.com>
In kvm mode, vm_clock may be read on AioContexts outside BQL(next
patch). This will make timers_state --the foundation of vm_clock
exposed to race condition. Using private lock to protect it.
Note in tcg mode, vm_clock still read inside BQL, so icount is
left without change.
Lock rule: private lock innermost, ie BQL->"this lock"
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
---
cpus.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/cpus.c b/cpus.c
index 61e86a8..4af81e9 100644
--- a/cpus.c
+++ b/cpus.c
@@ -112,7 +112,9 @@ typedef struct TimersState {
int64_t dummy;
} TimersState;
-TimersState timers_state;
+static TimersState timers_state;
+/* lock rule: innermost */
+static QemuMutex timers_state_lock;
/* Return the virtual CPU time, based on the instruction counter. */
int64_t cpu_get_icount(void)
@@ -134,11 +136,14 @@ int64_t cpu_get_icount(void)
/* return the host CPU cycle counter and handle stop/restart */
int64_t cpu_get_ticks(void)
{
+ int64_t ret;
+
if (use_icount) {
return cpu_get_icount();
}
+ qemu_mutex_lock(&timers_state_lock);
if (!timers_state.cpu_ticks_enabled) {
- return timers_state.cpu_ticks_offset;
+ ret = timers_state.cpu_ticks_offset;
} else {
int64_t ticks;
ticks = cpu_get_real_ticks();
@@ -148,41 +153,51 @@ int64_t cpu_get_ticks(void)
timers_state.cpu_ticks_offset += timers_state.cpu_ticks_prev - ticks;
}
timers_state.cpu_ticks_prev = ticks;
- return ticks + timers_state.cpu_ticks_offset;
+ ret = ticks + timers_state.cpu_ticks_offset;
}
+ qemu_mutex_unlock(&timers_state_lock);
+ return ret;
}
/* return the host CPU monotonic timer and handle stop/restart */
int64_t cpu_get_clock(void)
{
int64_t ti;
+
+ qemu_mutex_lock(&timers_state_lock);
if (!timers_state.cpu_ticks_enabled) {
- return timers_state.cpu_clock_offset;
+ ti = timers_state.cpu_clock_offset;
} else {
ti = get_clock();
- return ti + timers_state.cpu_clock_offset;
+ ti += timers_state.cpu_clock_offset;
}
+ qemu_mutex_unlock(&timers_state_lock);
+ return ti;
}
/* enable cpu_get_ticks() */
void cpu_enable_ticks(void)
{
+ qemu_mutex_lock(&timers_state_lock);
if (!timers_state.cpu_ticks_enabled) {
timers_state.cpu_ticks_offset -= cpu_get_real_ticks();
timers_state.cpu_clock_offset -= get_clock();
timers_state.cpu_ticks_enabled = 1;
}
+ qemu_mutex_unlock(&timers_state_lock);
}
/* disable cpu_get_ticks() : the clock is stopped. You must not call
cpu_get_ticks() after that. */
void cpu_disable_ticks(void)
{
+ qemu_mutex_lock(&timers_state_lock);
if (timers_state.cpu_ticks_enabled) {
timers_state.cpu_ticks_offset = cpu_get_ticks();
timers_state.cpu_clock_offset = cpu_get_clock();
timers_state.cpu_ticks_enabled = 0;
}
+ qemu_mutex_unlock(&timers_state_lock);
}
/* Correlation between real and virtual time is always going to be
@@ -353,6 +368,7 @@ static const VMStateDescription vmstate_timers = {
void configure_icount(const char *option)
{
+ qemu_mutex_init(&timers_state_lock);
vmstate_register(NULL, 0, &vmstate_timers, &timers_state);
if (!option) {
return;
--
1.8.1.4
next prev parent reply other threads:[~2013-07-29 3:17 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-29 3:16 [Qemu-devel] [RFC v2 0/5] arm AioContext with its own timer stuff Liu Ping Fan
2013-07-29 3:16 ` Liu Ping Fan [this message]
2013-07-29 6:26 ` [Qemu-devel] [RFC v2 1/5] timer: protect timers_state with lock Paolo Bonzini
2013-07-29 8:01 ` liu ping fan
2013-07-29 3:16 ` [Qemu-devel] [RFC v2 2/5] timer: pick out timer list info from QemuClock Liu Ping Fan
2013-07-29 3:16 ` [Qemu-devel] [RFC v2 3/5] timer: make qemu_clock_enable sync between disable and timer's cb Liu Ping Fan
2013-07-29 6:30 ` Paolo Bonzini
2013-07-29 8:10 ` liu ping fan
2013-07-29 11:21 ` Paolo Bonzini
2013-07-30 2:42 ` liu ping fan
2013-07-30 9:17 ` Paolo Bonzini
2013-07-30 9:51 ` Alex Bligh
2013-07-30 10:12 ` Paolo Bonzini
2013-08-01 5:54 ` liu ping fan
2013-08-01 8:57 ` Paolo Bonzini
2013-08-01 9:35 ` Alex Bligh
2013-08-01 12:19 ` Paolo Bonzini
2013-08-01 13:28 ` Alex Bligh
2013-08-01 13:51 ` Paolo Bonzini
2013-08-01 14:20 ` Alex Bligh
2013-08-01 14:28 ` Paolo Bonzini
2013-08-02 3:31 ` liu ping fan
2013-08-02 10:01 ` Paolo Bonzini
2013-08-02 3:33 ` liu ping fan
2013-08-02 14:43 ` Stefan Hajnoczi
2013-08-05 2:13 ` liu ping fan
2013-07-29 3:16 ` [Qemu-devel] [RFC v2 4/5] timer: associate three timerlists with AioContext Liu Ping Fan
2013-07-29 6:32 ` Paolo Bonzini
2013-07-29 8:20 ` liu ping fan
2013-07-29 13:11 ` Paolo Bonzini
2013-07-30 2:35 ` liu ping fan
2013-07-29 3:16 ` [Qemu-devel] [RFC v2 5/5] timer: run timers on aio_poll Liu Ping Fan
2013-07-29 9:22 ` [Qemu-devel] [RFC v2 0/5] arm AioContext with its own timer stuff Stefan Hajnoczi
2013-07-29 10:23 ` Alex Bligh
2013-07-29 13:36 ` Stefan Hajnoczi
2013-07-29 13:56 ` Alex Bligh
2013-07-30 3:35 ` liu ping fan
2013-07-29 10:18 ` Alex Bligh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375067768-11342-2-git-send-email-pingfank@linux.vnet.ibm.com \
--to=qemulist@gmail.com \
--cc=alex@alex.org.uk \
--cc=anthony@codemonkey.ws \
--cc=jan.kiszka@siemens.com \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).