From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Anthony Liguori <aliguori@us.ibm.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PATCH 5/6] dataplane: enable virtio-blk x-data-plane=on live migration
Date: Mon, 29 Jul 2013 17:36:11 +0200 [thread overview]
Message-ID: <1375112172-24863-6-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1375112172-24863-1-git-send-email-stefanha@redhat.com>
Although the dataplane thread does not cooperate with dirty memory
logging yet it's fairly easy to temporarily disable dataplane during
live migration. This way virtio-blk can live migrate when
x-data-plane=on.
The dataplane thread will restart after migration is cancelled or if the
guest resuming virtio-blk operation after migration completes.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
hw/block/dataplane/virtio-blk.c | 9 ---------
hw/block/virtio-blk.c | 32 ++++++++++++++++++++++++++++++++
include/hw/virtio/virtio-blk.h | 1 +
3 files changed, 33 insertions(+), 9 deletions(-)
diff --git a/hw/block/dataplane/virtio-blk.c b/hw/block/dataplane/virtio-blk.c
index 2faed43..63c3ffa 100644
--- a/hw/block/dataplane/virtio-blk.c
+++ b/hw/block/dataplane/virtio-blk.c
@@ -18,7 +18,6 @@
#include "qemu/error-report.h"
#include "hw/virtio/dataplane/vring.h"
#include "ioq.h"
-#include "migration/migration.h"
#include "block/block.h"
#include "hw/virtio/virtio-blk.h"
#include "virtio-blk.h"
@@ -69,8 +68,6 @@ struct VirtIOBlockDataPlane {
queue */
unsigned int num_reqs;
-
- Error *migration_blocker;
};
/* Raise an interrupt to signal guest, if necessary */
@@ -433,10 +430,6 @@ bool virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
/* Prevent block operations that conflict with data plane thread */
bdrv_set_in_use(blk->conf.bs, 1);
- error_setg(&s->migration_blocker,
- "x-data-plane does not support migration");
- migrate_add_blocker(s->migration_blocker);
-
*dataplane = s;
return true;
}
@@ -448,8 +441,6 @@ void virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s)
}
virtio_blk_data_plane_stop(s);
- migrate_del_blocker(s->migration_blocker);
- error_free(s->migration_blocker);
bdrv_set_in_use(s->blk->conf.bs, 0);
g_free(s);
}
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index cf12469..1237b6a 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -19,6 +19,7 @@
#include "hw/virtio/virtio-blk.h"
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
# include "dataplane/virtio-blk.h"
+# include "migration/migration.h"
#endif
#include "block/scsi.h"
#ifdef __linux__
@@ -628,6 +629,34 @@ void virtio_blk_set_conf(DeviceState *dev, VirtIOBlkConf *blk)
memcpy(&(s->blk), blk, sizeof(struct VirtIOBlkConf));
}
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+/* Disable dataplane thread during live migration since it does not
+ * update the dirty memory bitmap yet.
+ */
+static void virtio_blk_migration_state_changed(Notifier *notifier, void *data)
+{
+ VirtIOBlock *s = container_of(notifier, VirtIOBlock,
+ migration_state_notifier);
+ MigrationState *mig = data;
+
+ if (migration_in_setup(mig)) {
+ if (!s->dataplane) {
+ return;
+ }
+ virtio_blk_data_plane_destroy(s->dataplane);
+ s->dataplane = NULL;
+ } else if (migration_has_finished(mig) ||
+ migration_has_failed(mig)) {
+ if (s->dataplane) {
+ return;
+ }
+ bdrv_drain_all(); /* complete in-flight non-dataplane requests */
+ virtio_blk_data_plane_create(VIRTIO_DEVICE(s), &s->blk,
+ &s->dataplane);
+ }
+}
+#endif /* CONFIG_VIRTIO_BLK_DATA_PLANE */
+
static int virtio_blk_device_init(VirtIODevice *vdev)
{
DeviceState *qdev = DEVICE(vdev);
@@ -664,6 +693,8 @@ static int virtio_blk_device_init(VirtIODevice *vdev)
virtio_cleanup(vdev);
return -1;
}
+ s->migration_state_notifier.notify = virtio_blk_migration_state_changed;
+ add_migration_state_change_notifier(&s->migration_state_notifier);
#endif
s->change = qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
@@ -683,6 +714,7 @@ static int virtio_blk_device_exit(DeviceState *dev)
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOBlock *s = VIRTIO_BLK(dev);
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+ remove_migration_state_change_notifier(&s->migration_state_notifier);
virtio_blk_data_plane_destroy(s->dataplane);
s->dataplane = NULL;
#endif
diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index fc71853..b87cf49 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -125,6 +125,7 @@ typedef struct VirtIOBlock {
unsigned short sector_mask;
VMChangeStateEntry *change;
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+ Notifier migration_state_notifier;
struct VirtIOBlockDataPlane *dataplane;
#endif
} VirtIOBlock;
--
1.8.1.4
next prev parent reply other threads:[~2013-07-29 15:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-29 15:36 [Qemu-devel] [PULL for-1.6 0/6] Block patches Stefan Hajnoczi
2013-07-29 15:36 ` [Qemu-devel] [PATCH 1/6] gluster: Add image resize support Stefan Hajnoczi
2013-07-29 15:36 ` [Qemu-devel] [PATCH 2/6] block: Repair the throttling code Stefan Hajnoczi
2013-07-29 15:36 ` [Qemu-devel] [PATCH 3/6] migration: notify migration state before starting thread Stefan Hajnoczi
2013-07-29 15:36 ` [Qemu-devel] [PATCH 4/6] migration: fix spice migration Stefan Hajnoczi
2013-07-29 15:36 ` Stefan Hajnoczi [this message]
2013-07-29 15:36 ` [Qemu-devel] [PATCH 6/6] dataplane: refuse to start if device is already in use Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375112172-24863-6-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).