From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, stefano.stabellini@eu.citrix.com,
mtosatti@redhat.com, agraf@suse.de, borntraeger@de.ibm.com,
mkletzan@redhat.com, pbonzini@redhat.com, afaerber@suse.de,
rth@twiddle.net
Subject: [Qemu-devel] [PATCH v3 for 1.6 4/8] exec: Simplify the guest physical memory allocation hook
Date: Wed, 31 Jul 2013 15:11:08 +0200 [thread overview]
Message-ID: <1375276272-15988-5-git-send-email-armbru@redhat.com> (raw)
In-Reply-To: <1375276272-15988-1-git-send-email-armbru@redhat.com>
Make it a generic hook rather than a KVM hook. Less code and
ifdeffery.
Since the only user of the hook is old S390 KVM, there's hope we can
get rid of it some day.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
exec.c | 19 +++++++++++++------
include/exec/exec-all.h | 2 ++
include/sysemu/kvm.h | 5 -----
kvm-all.c | 13 -------------
target-s390x/kvm.c | 17 ++++++-----------
5 files changed, 21 insertions(+), 35 deletions(-)
diff --git a/exec.c b/exec.c
index 4a825fa..dc87cce 100644
--- a/exec.c
+++ b/exec.c
@@ -761,6 +761,18 @@ static int subpage_register (subpage_t *mmio, uint32_t start, uint32_t end,
uint16_t section);
static subpage_t *subpage_init(AddressSpace *as, hwaddr base);
+static void *(*phys_mem_alloc)(ram_addr_t size) = qemu_anon_ram_alloc;
+
+/*
+ * Set a custom physical guest memory alloator.
+ * Accelerators with unusual needs may need this. Hopefully, we can
+ * get rid of it eventually.
+ */
+void phys_mem_set_alloc(void *(*alloc)(ram_addr_t))
+{
+ phys_mem_alloc = alloc;
+}
+
static uint16_t phys_section_add(MemoryRegionSection *section)
{
/* The physical section number is ORed with a page-aligned
@@ -1136,12 +1148,7 @@ ram_addr_t qemu_ram_alloc_from_ptr(ram_addr_t size, void *host,
#endif
}
if (!new_block->host) {
- if (kvm_enabled()) {
- /* some s390/kvm configurations have special constraints */
- new_block->host = kvm_ram_alloc(size);
- } else {
- new_block->host = qemu_anon_ram_alloc(size);
- }
+ new_block->host = phys_mem_alloc(size);
memory_try_enable_merging(new_block->host, size);
}
}
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index 5920f73..33b43d2 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -383,6 +383,8 @@ bool is_tcg_gen_code(uintptr_t pc_ptr);
#if !defined(CONFIG_USER_ONLY)
+void phys_mem_set_alloc(void *(*alloc)(ram_addr_t));
+
struct MemoryRegion *iotlb_to_region(hwaddr index);
bool io_mem_read(struct MemoryRegion *mr, hwaddr addr,
uint64_t *pvalue, unsigned size);
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index de74411..a50a474 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -161,11 +161,6 @@ int kvm_cpu_exec(CPUState *cpu);
#ifdef NEED_CPU_H
-#if !defined(CONFIG_USER_ONLY)
-void *kvm_ram_alloc(ram_addr_t size);
-void *kvm_arch_ram_alloc(ram_addr_t size);
-#endif
-
void kvm_setup_guest_memory(void *start, size_t size);
void kvm_flush_coalesced_mmio_buffer(void);
diff --git a/kvm-all.c b/kvm-all.c
index 716860f..971bed8 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -1820,19 +1820,6 @@ int kvm_has_intx_set_mask(void)
return kvm_state->intx_set_mask;
}
-void *kvm_ram_alloc(ram_addr_t size)
-{
-#ifdef TARGET_S390X
- void *mem;
-
- mem = kvm_arch_ram_alloc(size);
- if (mem) {
- return mem;
- }
-#endif
- return qemu_anon_ram_alloc(size);
-}
-
void kvm_setup_guest_memory(void *start, size_t size)
{
#ifdef CONFIG_VALGRIND_H
diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c
index ab0e2b5..b5351e6 100644
--- a/target-s390x/kvm.c
+++ b/target-s390x/kvm.c
@@ -92,9 +92,15 @@ const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
static int cap_sync_regs;
+static void *legacy_s390_alloc(ram_addr_t size);
+
int kvm_arch_init(KVMState *s)
{
cap_sync_regs = kvm_check_extension(s, KVM_CAP_SYNC_REGS);
+ if (!kvm_check_extension(s, KVM_CAP_S390_GMAP)
+ || !kvm_check_extension(s, KVM_CAP_S390_COW)) {
+ phys_mem_set_alloc(legacy_s390_alloc);
+ }
return 0;
}
@@ -332,17 +338,6 @@ static void *legacy_s390_alloc(ram_addr_t size)
return mem;
}
-void *kvm_arch_ram_alloc(ram_addr_t size)
-{
- /* Can we use the standard allocation ? */
- if (kvm_check_extension(kvm_state, KVM_CAP_S390_GMAP) &&
- kvm_check_extension(kvm_state, KVM_CAP_S390_COW)) {
- return NULL;
- } else {
- return legacy_s390_alloc(size);
- }
-}
-
int kvm_arch_insert_sw_breakpoint(CPUState *cs, struct kvm_sw_breakpoint *bp)
{
static const uint8_t diag_501[] = {0x83, 0x24, 0x05, 0x01};
--
1.7.11.7
next prev parent reply other threads:[~2013-07-31 13:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-31 13:11 [Qemu-devel] [PATCH v3 for 1.6 0/8] Guest memory allocation fixes & cleanup Markus Armbruster
2013-07-31 13:11 ` [Qemu-devel] [PATCH v3 for 1.6 1/8] exec: Fix Xen RAM allocation with unusual options Markus Armbruster
2013-07-31 13:11 ` [Qemu-devel] [PATCH v3 for 1.6 2/8] exec: Clean up fall back when -mem-path allocation fails Markus Armbruster
2013-07-31 13:11 ` [Qemu-devel] [PATCH v3 for 1.6 3/8] exec: Reduce ifdeffery around -mem-path Markus Armbruster
2013-07-31 13:11 ` Markus Armbruster [this message]
2013-07-31 13:11 ` [Qemu-devel] [PATCH v3 for 1.6 5/8] exec: Drop incorrect & dead S390 code in qemu_ram_remap() Markus Armbruster
2013-07-31 13:11 ` [Qemu-devel] [PATCH v3 for 1.6 6/8] exec: Clean up unnecessary S390 ifdeffery Markus Armbruster
2013-07-31 13:11 ` [Qemu-devel] [PATCH v3 for 1.6 7/8] exec: Don't abort when we can't allocate guest memory Markus Armbruster
2013-07-31 13:51 ` Andreas Färber
2013-07-31 13:11 ` [Qemu-devel] [PATCH v3 for 1.6 8/8] pc_sysfw: Fix ISA BIOS init for ridiculously big flash Markus Armbruster
2013-07-31 15:35 ` [Qemu-devel] [PATCH v3 for 1.6 0/8] Guest memory allocation fixes & cleanup Laszlo Ersek
2013-08-16 7:58 ` Markus Armbruster
2013-09-11 13:22 ` Markus Armbruster
2013-09-29 15:15 ` Stefan Weil
2013-09-30 8:39 ` Markus Armbruster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375276272-15988-5-git-send-email-armbru@redhat.com \
--to=armbru@redhat.com \
--cc=afaerber@suse.de \
--cc=agraf@suse.de \
--cc=borntraeger@de.ibm.com \
--cc=mkletzan@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=stefano.stabellini@eu.citrix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).