[Qemu-devel] [PATCH 0/8] virtio for endian curious guests Take #2

[Qemu-devel] [PATCH 0/8] virtio for endian curious guests Take #2

[Rusty Russell]

The driver parts (patches 3-8) are unchanged, so didn't repost.

1) Rebased onto more recent git tree.
2) New stub is virtio_get_byteswap()
3) PPC64 uses endianness of first CPU interrupt vectors, not CPU endiannes.

Hope this one is closer...
Rusty.

Rusty Russell (8):
  virtio_get_byteswap: function for endian-ambivalent targets using
    virtio.
  target-ppc: ppc64 target's virtio can be either endian.
  virtio: allow byte swapping for vring and config access
  hw/net/virtio-net: use virtio wrappers to access headers.
  hw/net/virtio-balloon: use virtio wrappers to access page frame
    numbers.
  hw/block/virtio-blk: use virtio wrappers to access headers.
  hw/scsi/virtio-scsi: use virtio wrappers to access headers.
  hw/char/virtio-serial-bus: use virtio wrappers to access headers.

 hw/block/virtio-blk.c             |  35 +++++-----
 hw/char/virtio-serial-bus.c       |  34 +++++-----
 hw/net/virtio-net.c               |  15 +++--
 hw/scsi/virtio-scsi.c             |  33 +++++-----
 hw/virtio/virtio-balloon.c        |   3 +-
 hw/virtio/virtio.c                |  29 +++++----
 include/hw/virtio/virtio-access.h | 130 ++++++++++++++++++++++++++++++++++++++
 include/hw/virtio/virtio.h        |   2 +
 stubs/Makefile.objs               |   1 +
 stubs/virtio_get_byteswap.c       |   6 ++
 target-ppc/misc_helper.c          |   9 +++
 11 files changed, 226 insertions(+), 71 deletions(-)
 create mode 100644 include/hw/virtio/virtio-access.h
 create mode 100644 stubs/virtio_get_byteswap.c

-- 
1.8.1.2

[Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Rusty Russell]

virtio data structures are defined as "target endian", which assumes
that's a fixed value.  In fact, that actually means it's
platform-specific.

Hopefully the OASIS virtio 1.0 spec will fix this.  Meanwhile, create
a hook for little endian ppc.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 include/hw/virtio/virtio-access.h | 130 ++++++++++++++++++++++++++++++++++++++
 include/hw/virtio/virtio.h        |   2 +
 stubs/Makefile.objs               |   1 +
 stubs/virtio_get_byteswap.c       |   6 ++
 4 files changed, 139 insertions(+)
 create mode 100644 include/hw/virtio/virtio-access.h
 create mode 100644 stubs/virtio_get_byteswap.c

diff --git a/include/hw/virtio/virtio-access.h b/include/hw/virtio/virtio-access.h
new file mode 100644
index 0000000..01d7dd6
--- /dev/null
+++ b/include/hw/virtio/virtio-access.h
@@ -0,0 +1,130 @@
+/*
+ * Virtio Accessor Support: In case your target can change endian.
+ *
+ * Copyright IBM, Corp. 2013
+ *
+ * Authors:
+ *  Rusty Russell   <rusty@au.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#ifndef _QEMU_VIRTIO_ACCESS_H
+#define _QEMU_VIRTIO_ACCESS_H
+#include "hw/virtio/virtio.h"
+
+static inline uint16_t virtio_lduw_phys(hwaddr pa)
+{
+    if (virtio_get_byteswap()) {
+        return bswap16(lduw_phys(pa));
+    }
+    return lduw_phys(pa);
+    
+}
+
+static inline uint32_t virtio_ldl_phys(hwaddr pa)
+{
+    if (virtio_get_byteswap()) {
+        return bswap32(ldl_phys(pa));
+    }
+    return ldl_phys(pa);
+}
+
+static inline uint64_t virtio_ldq_phys(hwaddr pa)
+{
+    if (virtio_get_byteswap()) {
+        return bswap64(ldq_phys(pa));
+    }
+    return ldq_phys(pa);
+}
+
+static inline void virtio_stw_phys(hwaddr pa, uint16_t value)
+{
+    if (virtio_get_byteswap()) {
+        stw_phys(pa, bswap16(value));
+    } else {
+        stw_phys(pa, value);
+    }
+}
+
+static inline void virtio_stl_phys(hwaddr pa, uint32_t value)
+{
+    if (virtio_get_byteswap()) {
+        stl_phys(pa, bswap32(value));
+    } else {
+        stl_phys(pa, value);
+    }
+}
+
+static inline void virtio_stw_p(void *ptr, uint16_t v)
+{
+    if (virtio_get_byteswap()) {
+        stw_p(ptr, bswap16(v));
+    } else {
+        stw_p(ptr, v);
+    }
+}
+
+static inline void virtio_stl_p(void *ptr, uint32_t v)
+{
+    if (virtio_get_byteswap()) {
+        stl_p(ptr, bswap32(v));
+    } else {
+        stl_p(ptr, v);
+    }
+}
+
+static inline void virtio_stq_p(void *ptr, uint64_t v)
+{
+    if (virtio_get_byteswap()) {
+        stq_p(ptr, bswap64(v));
+    } else {
+        stq_p(ptr, v);
+    }
+}
+
+static inline int virtio_lduw_p(const void *ptr)
+{
+    if (virtio_get_byteswap()) {
+        return bswap16(lduw_p(ptr));
+    } else {
+        return lduw_p(ptr);
+    }
+}
+
+static inline int virtio_ldl_p(const void *ptr)
+{
+    if (virtio_get_byteswap()) {
+        return bswap32(ldl_p(ptr));
+    } else {
+        return ldl_p(ptr);
+    }
+}
+
+static inline uint64_t virtio_ldq_p(const void *ptr)
+{
+    if (virtio_get_byteswap()) {
+        return bswap64(ldq_p(ptr));
+    } else {
+        return ldq_p(ptr);
+    }
+}
+
+static inline uint32_t virtio_tswap32(uint32_t s)
+{
+    if (virtio_get_byteswap()) {
+        return bswap32(tswap32(s));
+    } else {
+        return tswap32(s);
+    }
+}
+
+static inline void virtio_tswap32s(uint32_t *s)
+{
+    tswap32s(s);
+    if (virtio_get_byteswap()) {
+        *s = bswap32(*s);
+    }
+}
+#endif /* _QEMU_VIRTIO_ACCESS_H */
diff --git a/include/hw/virtio/virtio.h b/include/hw/virtio/virtio.h
index d7e9e0f..18ca725 100644
--- a/include/hw/virtio/virtio.h
+++ b/include/hw/virtio/virtio.h
@@ -248,4 +248,6 @@ void virtio_queue_set_host_notifier_fd_handler(VirtQueue *vq, bool assign,
                                                bool set_handler);
 void virtio_queue_notify_vq(VirtQueue *vq);
 void virtio_irq(VirtQueue *vq);
+
+extern bool virtio_get_byteswap(void);
 #endif
diff --git a/stubs/Makefile.objs b/stubs/Makefile.objs
index f306cba..05f7bab 100644
--- a/stubs/Makefile.objs
+++ b/stubs/Makefile.objs
@@ -26,3 +26,4 @@ stub-obj-y += vm-stop.o
 stub-obj-y += vmstate.o
 stub-obj-$(CONFIG_WIN32) += fd-register.o
 stub-obj-y += cpus.o
+stub-obj-y += virtio_get_byteswap.o
diff --git a/stubs/virtio_get_byteswap.c b/stubs/virtio_get_byteswap.c
new file mode 100644
index 0000000..7cf764d
--- /dev/null
+++ b/stubs/virtio_get_byteswap.c
@@ -0,0 +1,6 @@
+#include "hw/virtio/virtio.h"
+
+bool virtio_get_byteswap(void)
+{
+    return false;
+}
-- 
1.8.1.2

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Benjamin Herrenschmidt]

On Mon, 2013-08-12 at 17:29 +0930, Rusty Russell wrote:
> virtio data structures are defined as "target endian", which assumes
> that's a fixed value.  In fact, that actually means it's
> platform-specific.
> 
> Hopefully the OASIS virtio 1.0 spec will fix this.  Meanwhile, create
> a hook for little endian ppc.

Ok, sorry if I missed a previous debate on that one but why do you do a
call-out to architecture specific stuff (that is not even inline) on
every access ?

If we consider that virtio byte order is global, can't you make it a
global that is *set* by the architecture rather than *polled* by
virtio ?

We have explicit knowledge of when our endianness change (we get the
hcall or a write to some SPR), we can call virtio *then* to adjust the
endianness rather than having a call-out to the platform on every
access.

Ben.

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Peter Maydell]

On 12 August 2013 10:28, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> We have explicit knowledge of when our endianness change (we get the
> hcall or a write to some SPR), we can call virtio *then* to adjust the
> endianness rather than having a call-out to the platform on every
> access.

ARM doesn't -- I wouldn't expect changing the endianness of
exceptions via writing to the SCTLR to trap to the hypervisor
(and in any case it certainly won't result in a return to
userspace).

-- PMM

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Benjamin Herrenschmidt]

On Mon, 2013-08-12 at 10:39 +0100, Peter Maydell wrote:
> On 12 August 2013 10:28, Benjamin Herrenschmidt
> <benh@kernel.crashing.org> wrote:
> > We have explicit knowledge of when our endianness change (we get the
> > hcall or a write to some SPR), we can call virtio *then* to adjust the
> > endianness rather than having a call-out to the platform on every
> > access.
> 
> ARM doesn't -- I wouldn't expect changing the endianness of
> exceptions via writing to the SCTLR to trap to the hypervisor
> (and in any case it certainly won't result in a return to
> userspace).

But don't you need to reconfigure the bridge (as per our previous
discussion) ? In that case you do need to call out to qemu ...

Cheers,
Ben.

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Peter Maydell]

On 12 August 2013 10:43, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> On Mon, 2013-08-12 at 10:39 +0100, Peter Maydell wrote:
>> ARM doesn't -- I wouldn't expect changing the endianness of
>> exceptions via writing to the SCTLR to trap to the hypervisor
>> (and in any case it certainly won't result in a return to
>> userspace).
>
> But don't you need to reconfigure the bridge (as per our previous
> discussion) ? In that case you do need to call out to qemu ...

Bridge? You've lost me, I'm afraid.

-- PMM

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Benjamin Herrenschmidt]

On Mon, 2013-08-12 at 10:45 +0100, Peter Maydell wrote:
> On 12 August 2013 10:43, Benjamin Herrenschmidt
> <benh@kernel.crashing.org> wrote:
> > On Mon, 2013-08-12 at 10:39 +0100, Peter Maydell wrote:
> >> ARM doesn't -- I wouldn't expect changing the endianness of
> >> exceptions via writing to the SCTLR to trap to the hypervisor
> >> (and in any case it certainly won't result in a return to
> >> userspace).
> >
> > But don't you need to reconfigure the bridge (as per our previous
> > discussion) ? In that case you do need to call out to qemu ...
> 
> Bridge? You've lost me, I'm afraid.

I must be confused ... you mentioned in a previous discussion around
endianness that on some ARM cores at least, when changing the OS
endianness, you had to configure a different lane swapping in the bridge
to the the IO devices (AXI ?)

But I might be confusing with something else.

Ben.

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Peter Maydell]

On 12 August 2013 10:50, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> I must be confused ... you mentioned in a previous discussion around
> endianness that on some ARM cores at least, when changing the OS
> endianness, you had to configure a different lane swapping in the bridge
> to the the IO devices (AXI ?)

No, that's just the implementation -- the bit in the control
register is effectively controlling whether there is byte lane
swapping in the part of the CPU which is the data path between
it and its bus to the outside world.

-- PMM

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Benjamin Herrenschmidt]

On Mon, 2013-08-12 at 10:52 +0100, Peter Maydell wrote:
> On 12 August 2013 10:50, Benjamin Herrenschmidt
> <benh@kernel.crashing.org> wrote:
> > I must be confused ... you mentioned in a previous discussion around
> > endianness that on some ARM cores at least, when changing the OS
> > endianness, you had to configure a different lane swapping in the bridge
> > to the the IO devices (AXI ?)
> 
> No, that's just the implementation -- the bit in the control
> register is effectively controlling whether there is byte lane
> swapping in the part of the CPU which is the data path between
> it and its bus to the outside world.

I find it amazing that an OS can touch that without hitting the
hypervisor :-) Anyway, ok, we do need to poll from virtio then, but we
probably need to cache as well, no ?

When do you sample it in qemu ?

Cheers,
Ben.

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Peter Maydell]

On 12 August 2013 10:56, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> On Mon, 2013-08-12 at 10:52 +0100, Peter Maydell wrote:
>> On 12 August 2013 10:50, Benjamin Herrenschmidt
>> <benh@kernel.crashing.org> wrote:
>> > I must be confused ... you mentioned in a previous discussion around
>> > endianness that on some ARM cores at least, when changing the OS
>> > endianness, you had to configure a different lane swapping in the bridge
>> > to the the IO devices (AXI ?)
>>
>> No, that's just the implementation -- the bit in the control
>> register is effectively controlling whether there is byte lane
>> swapping in the part of the CPU which is the data path between
>> it and its bus to the outside world.
>
> I find it amazing that an OS can touch that without hitting the
> hypervisor :-)

It's no different to having a userspace process able to have
a different setting from the OS, really. (There is an equivalent
bit in another register that controls what endianness we
use if we trap to hyp mode.)

> Anyway, ok, we do need to poll from virtio then, but we
> probably need to cache as well, no ?
>
> When do you sample it in qemu ?

It's a bit theoretical at the moment since QEMU's ARM code
kind of assumes little endian. I would expect that at the
point when virtio was in an MMIO callback the CPUState
struct would have been updated via the usual sync process in
kvm_arch_get_registers().

-- PMM

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Anthony Liguori]

Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:

> On Mon, 2013-08-12 at 17:29 +0930, Rusty Russell wrote:
>> virtio data structures are defined as "target endian", which assumes
>> that's a fixed value.  In fact, that actually means it's
>> platform-specific.
>> 
>> Hopefully the OASIS virtio 1.0 spec will fix this.  Meanwhile, create
>> a hook for little endian ppc.
>
> Ok, sorry if I missed a previous debate on that one but why do you do a
> call-out to architecture specific stuff (that is not even inline) on
> every access ?

Let's focus on getting something merged.  Then we can muck around with
it down the road.

Having target-ppc call into virtio is a layering violation.  This
approach keeps the dependencies cleaner.

Regards,

Anthony Liguori

>
> If we consider that virtio byte order is global, can't you make it a
> global that is *set* by the architecture rather than *polled* by
> virtio ?
>
> We have explicit knowledge of when our endianness change (we get the
> hcall or a write to some SPR), we can call virtio *then* to adjust the
> endianness rather than having a call-out to the platform on every
> access.
>
> Ben.

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Rusty Russell]

Anthony Liguori <anthony@codemonkey.ws> writes:
> Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:
>
>> On Mon, 2013-08-12 at 17:29 +0930, Rusty Russell wrote:
>>> virtio data structures are defined as "target endian", which assumes
>>> that's a fixed value.  In fact, that actually means it's
>>> platform-specific.
>>> 
>>> Hopefully the OASIS virtio 1.0 spec will fix this.  Meanwhile, create
>>> a hook for little endian ppc.
>>
>> Ok, sorry if I missed a previous debate on that one but why do you do a
>> call-out to architecture specific stuff (that is not even inline) on
>> every access ?

Anthony said he wanted it that way: my initial patch was more optimized.

> Let's focus on getting something merged.  Then we can muck around with
> it down the road.
>
> Having target-ppc call into virtio is a layering violation.  This
> approach keeps the dependencies cleaner.

We can have it call once (eg. when the first and storing the status
word) and store the result.

Cheers,
Rusty.

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Benjamin Herrenschmidt]

On Tue, 2013-08-13 at 13:50 +0930, Rusty Russell wrote:
> We can have it call once (eg. when the first and storing the status
> word) and store the result.

And fail with kexec of a different endian kernel :-) Let's not bother
yet. Merge it and then we see if we can optimize.

Cheers,
Ben.

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Rusty Russell]

Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:
> On Tue, 2013-08-13 at 13:50 +0930, Rusty Russell wrote:
>> We can have it call once (eg. when the first and storing the status
>> word) and store the result.
>
> And fail with kexec of a different endian kernel :-) Let's not bother
> yet. Merge it and then we see if we can optimize.

Yeah, my code actually did it every status bye write, which
unintentionally solved this.

But agreed, let's let these patches stand...

Cheers,
Rusty.

Re: [Qemu-devel] [PATCH 1/8] virtio_get_byteswap: function for endian-ambivalent targets using virtio.

[Rusty Russell]

Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:
> On Mon, 2013-08-12 at 17:29 +0930, Rusty Russell wrote:
>> virtio data structures are defined as "target endian", which assumes
>> that's a fixed value.  In fact, that actually means it's
>> platform-specific.
>> 
>> Hopefully the OASIS virtio 1.0 spec will fix this.  Meanwhile, create
>> a hook for little endian ppc.
>
> Ok, sorry if I missed a previous debate on that one but why do you do a
> call-out to architecture specific stuff (that is not even inline) on
> every access ?
>
> If we consider that virtio byte order is global, can't you make it a
> global that is *set* by the architecture rather than *polled* by
> virtio ?

OK, so after some more offline discussion it turns out these patches
won't really work reliably, since powerpc kvm doesn't reflect the
register into qemu.

Mikey N has promised me a KVM_GET_ONE_REG to get the register, and I'll
rework on top of that: we will query that whenever a device is reset
(which Linux does on every device init, so it captures the kexec case
too).

Cheers,
Rusty.

[Qemu-devel] [PATCH 2/8] target-ppc: ppc64 target's virtio can be either endian.

[Rusty Russell]

We base it on the OS endian, as reflected by the endianness of the
interrupt vectors.

Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 target-ppc/misc_helper.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/target-ppc/misc_helper.c b/target-ppc/misc_helper.c
index 616aab6..6c97c81 100644
--- a/target-ppc/misc_helper.c
+++ b/target-ppc/misc_helper.c
@@ -20,6 +20,7 @@
 #include "helper.h"
 
 #include "helper_regs.h"
+#include "hw/virtio/virtio.h"
 
 /*****************************************************************************/
 /* SPR accesses */
@@ -116,3 +117,11 @@ void ppc_store_msr(CPUPPCState *env, target_ulong value)
 {
     hreg_store_msr(env, value, 0);
 }
+
+bool virtio_get_byteswap(void)
+{
+    PowerPCCPU *cp = POWERPC_CPU(first_cpu);
+    CPUPPCState *env = &cp->env;
+
+    return env->spr[SPR_LPCR] & LPCR_ILE;
+}
-- 
1.8.1.2

[Qemu-devel] [PATCH 3/8] virtio: allow byte swapping for vring and config access

[Rusty Russell]

This is based on a simpler patch by Anthony Liguouri, which only handled
the vring accesses.  We also need some drivers to access these helpers,
eg. for data which contains headers.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 hw/virtio/virtio.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
index 09f62c6..178647b 100644
--- a/hw/virtio/virtio.c
+++ b/hw/virtio/virtio.c
@@ -18,6 +18,7 @@
 #include "hw/virtio/virtio.h"
 #include "qemu/atomic.h"
 #include "hw/virtio/virtio-bus.h"
+#include "hw/virtio/virtio-access.h"
 
 /*
  * The alignment to use between consumer and producer parts of vring.
@@ -104,49 +105,49 @@ static inline uint64_t vring_desc_addr(hwaddr desc_pa, int i)
 {
     hwaddr pa;
     pa = desc_pa + sizeof(VRingDesc) * i + offsetof(VRingDesc, addr);
-    return ldq_phys(pa);
+    return virtio_ldq_phys(pa);
 }
 
 static inline uint32_t vring_desc_len(hwaddr desc_pa, int i)
 {
     hwaddr pa;
     pa = desc_pa + sizeof(VRingDesc) * i + offsetof(VRingDesc, len);
-    return ldl_phys(pa);
+    return virtio_ldl_phys(pa);
 }
 
 static inline uint16_t vring_desc_flags(hwaddr desc_pa, int i)
 {
     hwaddr pa;
     pa = desc_pa + sizeof(VRingDesc) * i + offsetof(VRingDesc, flags);
-    return lduw_phys(pa);
+    return virtio_lduw_phys(pa);
 }
 
 static inline uint16_t vring_desc_next(hwaddr desc_pa, int i)
 {
     hwaddr pa;
     pa = desc_pa + sizeof(VRingDesc) * i + offsetof(VRingDesc, next);
-    return lduw_phys(pa);
+    return virtio_lduw_phys(pa);
 }
 
 static inline uint16_t vring_avail_flags(VirtQueue *vq)
 {
     hwaddr pa;
     pa = vq->vring.avail + offsetof(VRingAvail, flags);
-    return lduw_phys(pa);
+    return virtio_lduw_phys(pa);
 }
 
 static inline uint16_t vring_avail_idx(VirtQueue *vq)
 {
     hwaddr pa;
     pa = vq->vring.avail + offsetof(VRingAvail, idx);
-    return lduw_phys(pa);
+    return virtio_lduw_phys(pa);
 }
 
 static inline uint16_t vring_avail_ring(VirtQueue *vq, int i)
 {
     hwaddr pa;
     pa = vq->vring.avail + offsetof(VRingAvail, ring[i]);
-    return lduw_phys(pa);
+    return virtio_lduw_phys(pa);
 }
 
 static inline uint16_t vring_used_event(VirtQueue *vq)
@@ -158,42 +159,42 @@ static inline void vring_used_ring_id(VirtQueue *vq, int i, uint32_t val)
 {
     hwaddr pa;
     pa = vq->vring.used + offsetof(VRingUsed, ring[i].id);
-    stl_phys(pa, val);
+    virtio_stl_phys(pa, val);
 }
 
 static inline void vring_used_ring_len(VirtQueue *vq, int i, uint32_t val)
 {
     hwaddr pa;
     pa = vq->vring.used + offsetof(VRingUsed, ring[i].len);
-    stl_phys(pa, val);
+    virtio_stl_phys(pa, val);
 }
 
 static uint16_t vring_used_idx(VirtQueue *vq)
 {
     hwaddr pa;
     pa = vq->vring.used + offsetof(VRingUsed, idx);
-    return lduw_phys(pa);
+    return virtio_lduw_phys(pa);
 }
 
 static inline void vring_used_idx_set(VirtQueue *vq, uint16_t val)
 {
     hwaddr pa;
     pa = vq->vring.used + offsetof(VRingUsed, idx);
-    stw_phys(pa, val);
+    virtio_stw_phys(pa, val);
 }
 
 static inline void vring_used_flags_set_bit(VirtQueue *vq, int mask)
 {
     hwaddr pa;
     pa = vq->vring.used + offsetof(VRingUsed, flags);
-    stw_phys(pa, lduw_phys(pa) | mask);
+    virtio_stw_phys(pa, virtio_lduw_phys(pa) | mask);
 }
 
 static inline void vring_used_flags_unset_bit(VirtQueue *vq, int mask)
 {
     hwaddr pa;
     pa = vq->vring.used + offsetof(VRingUsed, flags);
-    stw_phys(pa, lduw_phys(pa) & ~mask);
+    virtio_stw_phys(pa, virtio_lduw_phys(pa) & ~mask);
 }
 
 static inline void vring_avail_event(VirtQueue *vq, uint16_t val)
@@ -203,7 +204,7 @@ static inline void vring_avail_event(VirtQueue *vq, uint16_t val)
         return;
     }
     pa = vq->vring.used + offsetof(VRingUsed, ring[vq->vring.num]);
-    stw_phys(pa, val);
+    virtio_stw_phys(pa, val);
 }
 
 void virtio_queue_set_notification(VirtQueue *vq, int enable)
-- 
1.8.1.2

[Qemu-devel] [PATCH] hw/9pfs/virtio_9p_device: use virtio wrappers to access headers.

[Greg Kurz]

Follow-up to Rusty's virtio endianness serie: enough to get a working
virtfs mount.

Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
---
 hw/9pfs/virtio-9p-device.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/hw/9pfs/virtio-9p-device.c b/hw/9pfs/virtio-9p-device.c
index f0ffbe8..bc2d0da 100644
--- a/hw/9pfs/virtio-9p-device.c
+++ b/hw/9pfs/virtio-9p-device.c
@@ -19,6 +19,7 @@
 #include "fsdev/qemu-fsdev.h"
 #include "virtio-9p-xattr.h"
 #include "virtio-9p-coth.h"
+#include "hw/virtio/virtio-access.h"
 
 static uint32_t virtio_9p_get_features(VirtIODevice *vdev, uint32_t features)
 {
@@ -34,7 +35,7 @@ static void virtio_9p_get_config(VirtIODevice *vdev, uint8_t *config)
 
     len = strlen(s->tag);
     cfg = g_malloc0(sizeof(struct virtio_9p_config) + len);
-    stw_raw(&cfg->tag_len, len);
+    virtio_stl_p(&cfg->tag_len, len);
     /* We don't copy the terminating null to config space */
     memcpy(cfg->tag, s->tag, len);
     memcpy(config, cfg, s->config_size);

Re: [Qemu-devel] [PATCH] hw/9pfs/virtio_9p_device: use virtio wrappers to access headers.

[Rusty Russell]

Greg Kurz <gkurz@linux.vnet.ibm.com> writes:
> Follow-up to Rusty's virtio endianness serie: enough to get a working
> virtfs mount.
>
> Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
>
> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

Thanks!

I've reworked my patches in line with the anticipated KVM_GET_ONE_REG
from Mikey, and put this into the series.

Mikey, here's the template I assumed (needs CONFIG_KVM implementation of
kvmppc_update_spr_lpcr).

Cheers,
Rusty.

FIXME: Implement for KVM using KVM_GET_ONE_REG!

diff --git a/target-ppc/kvm_ppc.h b/target-ppc/kvm_ppc.h
index 771cfbe..30d8af6 100644
--- a/target-ppc/kvm_ppc.h
+++ b/target-ppc/kvm_ppc.h
@@ -29,6 +29,7 @@ int kvmppc_clear_tsr_bits(PowerPCCPU *cpu, uint32_t tsr_bits);
 int kvmppc_or_tsr_bits(PowerPCCPU *cpu, uint32_t tsr_bits);
 int kvmppc_set_tcr(PowerPCCPU *cpu);
 int kvmppc_booke_watchdog_enable(PowerPCCPU *cpu);
+void kvmppc_update_spr_lpcr(PowerPCCPU *cpu);
 #ifndef CONFIG_USER_ONLY
 off_t kvmppc_alloc_rma(const char *name, MemoryRegion *sysmem);
 void *kvmppc_create_spapr_tce(uint32_t liobn, uint32_t window_size, int *pfd);
@@ -159,6 +160,10 @@ static inline bool kvmppc_has_cap_epr(void)
 {
     return false;
 }
+
+static inline void kvmppc_update_spr_lpcr(PowerPCCPU *cpu)
+{
+}
 #endif
 
 #ifndef CONFIG_KVM