From: Laszlo Ersek <lersek@redhat.com>
To: kwolf@redhat.com, stefanha@redhat.com, pbonzini@redhat.com,
hch@lst.de, anthony@codemonkey.ws, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 1/7] add skeleton for BSD licensed "raw" BlockDriver
Date: Wed, 21 Aug 2013 12:41:17 +0200 [thread overview]
Message-ID: <1377081683-1600-2-git-send-email-lersek@redhat.com> (raw)
In-Reply-To: <1377081683-1600-1-git-send-email-lersek@redhat.com>
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
block/raw_bsd.c | 108 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 108 insertions(+), 0 deletions(-)
create mode 100644 block/raw_bsd.c
diff --git a/block/raw_bsd.c b/block/raw_bsd.c
new file mode 100644
index 0000000..5c17d53
--- /dev/null
+++ b/block/raw_bsd.c
@@ -0,0 +1,108 @@
+/* BlockDriver implementation for "raw"
+ *
+ * Copyright (C) 2013, Red Hat, Inc.
+ *
+ * Author:
+ * Laszlo Ersek <lersek@redhat.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include "block/block_int.h"
+
+static TYPE raw_reopen_prepare(BlockDriverState *bs)
+{
+ return bdrv_reopen_prepare(bs->file);
+}
+
+static TYPE raw_co_readv(BlockDriverState *bs)
+{
+ return bdrv_co_readv(bs->file);
+}
+
+static TYPE raw_co_writev(BlockDriverState *bs)
+{
+ return bdrv_co_writev(bs->file);
+}
+
+static TYPE raw_co_is_allocated(BlockDriverState *bs)
+{
+ return bdrv_co_is_allocated(bs->file);
+}
+
+static TYPE raw_co_write_zeroes(BlockDriverState *bs)
+{
+ return bdrv_co_write_zeroes(bs->file);
+}
+
+static TYPE raw_co_discard(BlockDriverState *bs)
+{
+ return bdrv_co_discard(bs->file);
+}
+
+static TYPE raw_getlength(BlockDriverState *bs)
+{
+ return bdrv_getlength(bs->file);
+}
+
+static TYPE raw_get_info(BlockDriverState *bs)
+{
+ return bdrv_get_info(bs->file);
+}
+
+static TYPE raw_truncate(BlockDriverState *bs)
+{
+ return bdrv_truncate(bs->file);
+}
+
+static TYPE raw_is_inserted(BlockDriverState *bs)
+{
+ return bdrv_is_inserted(bs->file);
+}
+
+static TYPE raw_media_changed(BlockDriverState *bs)
+{
+ return bdrv_media_changed(bs->file);
+}
+
+static TYPE raw_eject(BlockDriverState *bs)
+{
+ return bdrv_eject(bs->file);
+}
+
+static TYPE raw_lock_medium(BlockDriverState *bs)
+{
+ return bdrv_lock_medium(bs->file);
+}
+
+static TYPE raw_ioctl(BlockDriverState *bs)
+{
+ return bdrv_ioctl(bs->file);
+}
+
+static TYPE raw_aio_ioctl(BlockDriverState *bs)
+{
+ return bdrv_aio_ioctl(bs->file);
+}
+
+static TYPE raw_has_zero_init(BlockDriverState *bs)
+{
+ return bdrv_has_zero_init(bs->file);
+}
+
--
1.7.1
next prev parent reply other threads:[~2013-08-21 10:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-21 10:41 [Qemu-devel] [PATCH v2 0/7] introduce BSD-licensed block driver for "raw" Laszlo Ersek
2013-08-21 10:41 ` Laszlo Ersek [this message]
2013-08-21 10:41 ` [Qemu-devel] [PATCH v2 2/7] raw_bsd: emit debug events in bdrv_co_readv() and bdrv_co_writev() Laszlo Ersek
2013-08-21 10:41 ` [Qemu-devel] [PATCH v2 3/7] raw_bsd: add raw_create() Laszlo Ersek
2013-08-21 10:41 ` [Qemu-devel] [PATCH v2 4/7] raw_bsd: introduce "special members" Laszlo Ersek
2013-08-21 10:41 ` [Qemu-devel] [PATCH v2 5/7] raw_bsd: add raw_create_options Laszlo Ersek
2013-08-21 10:41 ` [Qemu-devel] [PATCH v2 6/7] raw_bsd: register bdrv_raw Laszlo Ersek
2013-08-21 10:41 ` [Qemu-devel] [PATCH v2 7/7] switch raw block driver from "raw.o" to "raw_bsd.o" Laszlo Ersek
2013-08-28 10:50 ` [Qemu-devel] [PATCH v2 0/7] introduce BSD-licensed block driver for "raw" Laszlo Ersek
2013-08-28 13:17 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377081683-1600-2-git-send-email-lersek@redhat.com \
--to=lersek@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=hch@lst.de \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).