From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: qemu-devel@nongnu.org
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>,
Alexander Graf <agraf@suse.de>,
Alex Williamson <alex.williamson@redhat.com>,
qemu-ppc@nongnu.org, David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCH v4 03/12] vfio: Add guest side IOMMU support
Date: Fri, 30 Aug 2013 20:15:29 +1000 [thread overview]
Message-ID: <1377857738-14789-4-git-send-email-aik@ozlabs.ru> (raw)
In-Reply-To: <1377857738-14789-1-git-send-email-aik@ozlabs.ru>
From: David Gibson <david@gibson.dropbear.id.au>
This patch uses the new IOMMU notifiers to allow VFIO pass through devices
to work with guest side IOMMUs, as long as the host-side VFIO iommu has
sufficient capability and granularity to match the guest side. This works
by tracking all map and unmap operations on the guest IOMMU using the
notifiers, and mirroring them into VFIO.
There are a number of FIXMEs, and the scheme involves rather more notifier
structures than I'd like, but it should make for a reasonable proof of
concept.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
Changes:
v4:
* fixed list objects naming
* vfio_listener_region_add() reworked to call memory_region_ref() from one
place only, it is also easier to review the changes
* fixes boundary check not to fail on sections == 2^64 bytes,
the "vfio: Fix debug output for int128 values" patch is required;
this obsoletes the "[PATCH v3 0/3] vfio: fixes for better support
for 128 bit memory section sizes" patch proposal
---
hw/misc/vfio.c | 137 +++++++++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 128 insertions(+), 9 deletions(-)
diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
index c16f41b..53791fb 100644
--- a/hw/misc/vfio.c
+++ b/hw/misc/vfio.c
@@ -150,10 +150,18 @@ typedef struct VFIOContainer {
};
void (*release)(struct VFIOContainer *);
} iommu_data;
+ QLIST_HEAD(, VFIOGuestIOMMU) giommu_list;
QLIST_HEAD(, VFIOGroup) group_list;
QLIST_ENTRY(VFIOContainer) next;
} VFIOContainer;
+typedef struct VFIOGuestIOMMU {
+ VFIOContainer *container;
+ MemoryRegion *iommu;
+ Notifier n;
+ QLIST_ENTRY(VFIOGuestIOMMU) giommu_next;
+} VFIOGuestIOMMU;
+
/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */
typedef struct VFIOMSIXInfo {
uint8_t table_bar;
@@ -1917,7 +1925,63 @@ static int vfio_dma_map(VFIOContainer *container, hwaddr iova,
static bool vfio_listener_skipped_section(MemoryRegionSection *section)
{
- return !memory_region_is_ram(section->mr);
+ return !memory_region_is_ram(section->mr) &&
+ !memory_region_is_iommu(section->mr);
+}
+
+static void vfio_iommu_map_notify(Notifier *n, void *data)
+{
+ VFIOGuestIOMMU *giommu = container_of(n, VFIOGuestIOMMU, n);
+ VFIOContainer *container = giommu->container;
+ IOMMUTLBEntry *iotlb = data;
+ MemoryRegion *mr;
+ hwaddr xlat;
+ hwaddr len = iotlb->addr_mask + 1;
+ void *vaddr;
+ int ret;
+
+ DPRINTF("iommu map @ %"HWADDR_PRIx" - %"HWADDR_PRIx"\n",
+ iotlb->iova, iotlb->iova + iotlb->addr_mask);
+
+ /*
+ * The IOMMU TLB entry we have just covers translation through
+ * this IOMMU to its immediate target. We need to translate
+ * it the rest of the way through to memory.
+ */
+ mr = address_space_translate(&address_space_memory,
+ iotlb->translated_addr,
+ &xlat, &len, iotlb->perm & IOMMU_WO);
+ if (!memory_region_is_ram(mr)) {
+ DPRINTF("iommu map to non memory area %"HWADDR_PRIx"\n",
+ xlat);
+ return;
+ }
+ if (len & iotlb->addr_mask) {
+ DPRINTF("iommu has granularity incompatible with target AS\n");
+ return;
+ }
+
+ vaddr = memory_region_get_ram_ptr(mr) + xlat;
+
+ if (iotlb->perm != IOMMU_NONE) {
+ ret = vfio_dma_map(container, iotlb->iova,
+ iotlb->addr_mask + 1, vaddr,
+ !(iotlb->perm & IOMMU_WO) || mr->readonly);
+ if (ret) {
+ error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", "
+ "0x%"HWADDR_PRIx", %p) = %d (%m)",
+ container, iotlb->iova,
+ iotlb->addr_mask + 1, vaddr, ret);
+ }
+ } else {
+ ret = vfio_dma_unmap(container, iotlb->iova, iotlb->addr_mask + 1);
+ if (ret) {
+ error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", "
+ "0x%"HWADDR_PRIx") = %d (%m)",
+ container, iotlb->iova,
+ iotlb->addr_mask + 1, ret);
+ }
+ }
}
static void vfio_listener_region_add(MemoryListener *listener,
@@ -1926,11 +1990,10 @@ static void vfio_listener_region_add(MemoryListener *listener,
VFIOContainer *container = container_of(listener, VFIOContainer,
iommu_data.listener);
hwaddr iova, end;
+ Int128 llend;
void *vaddr;
int ret;
- assert(!memory_region_is_iommu(section->mr));
-
if (vfio_listener_skipped_section(section)) {
DPRINTF("SKIPPING region_add %"HWADDR_PRIx" - %"PRIx64"\n",
section->offset_within_address_space,
@@ -1946,21 +2009,57 @@ static void vfio_listener_region_add(MemoryListener *listener,
}
iova = TARGET_PAGE_ALIGN(section->offset_within_address_space);
+ llend = int128_make64(section->offset_within_address_space);
+ llend = int128_add(llend, section->size);
+ llend = int128_and(llend, int128_exts64(TARGET_PAGE_MASK));
+
+ if (int128_ge(int128_make64(iova), llend)) {
+ return;
+ }
+
+ memory_region_ref(section->mr);
+
+ if (memory_region_is_iommu(section->mr)) {
+ VFIOGuestIOMMU *giommu;
+
+ DPRINTF("region_add [iommu] %"HWADDR_PRIx" - %"HWADDR_PRIx"\n",
+ iova, int128_get64(int128_sub(llend, int128_one())));
+ /*
+ * FIXME: We should do some checking to see if the
+ * capabilities of the host VFIO IOMMU are adequate to model
+ * the guest IOMMU
+ *
+ * FIXME: This assumes that the guest IOMMU is empty of
+ * mappings at this point - we should either enforce this, or
+ * loop through existing mappings to map them into VFIO.
+ *
+ * FIXME: For VFIO iommu types which have KVM acceleration to
+ * avoid bouncing all map/unmaps through qemu this way, this
+ * would be the right place to wire that up (tell the KVM
+ * device emulation the VFIO iommu handles to use).
+ */
+ giommu = g_malloc0(sizeof(*giommu));
+ giommu->iommu = section->mr;
+ giommu->container = container;
+ giommu->n.notify = vfio_iommu_map_notify;
+ QLIST_INSERT_HEAD(&container->giommu_list, giommu, giommu_next);
+ memory_region_register_iommu_notifier(giommu->iommu, &giommu->n);
+
+ return;
+ }
+
+ /* Here we assume that memory_region_is_ram(section->mr)==true */
+
end = (section->offset_within_address_space + int128_get64(section->size)) &
TARGET_PAGE_MASK;
- if (iova >= end) {
- return;
- }
-
vaddr = memory_region_get_ram_ptr(section->mr) +
section->offset_within_region +
(iova - section->offset_within_address_space);
- DPRINTF("region_add %"HWADDR_PRIx" - %"HWADDR_PRIx" [%p]\n",
+ DPRINTF("region_add [ram] %"HWADDR_PRIx" - %"HWADDR_PRIx" [%p]\n",
iova, end - 1, vaddr);
- memory_region_ref(section->mr);
ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly);
if (ret) {
error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", "
@@ -1991,6 +2090,26 @@ static void vfio_listener_region_del(MemoryListener *listener,
return;
}
+ if (memory_region_is_iommu(section->mr)) {
+ VFIOGuestIOMMU *giommu;
+
+ QLIST_FOREACH(giommu, &container->giommu_list, giommu_next) {
+ if (giommu->iommu == section->mr) {
+ memory_region_unregister_iommu_notifier(&giommu->n);
+ QLIST_REMOVE(giommu, giommu_next);
+ g_free(giommu);
+ break;
+ }
+ }
+
+ /*
+ * FIXME: We assume the one big unmap below is adequate to
+ * remove any individual page mappings in the IOMMU which
+ * might have been copied into VFIO. That may not be true for
+ * all IOMMU types
+ */
+ }
+
iova = TARGET_PAGE_ALIGN(section->offset_within_address_space);
end = (section->offset_within_address_space + int128_get64(section->size)) &
TARGET_PAGE_MASK;
--
1.8.4.rc4
next prev parent reply other threads:[~2013-08-30 10:16 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-30 10:15 [Qemu-devel] [PATCH v4 00/12] vfio on spapr-ppc64 Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 01/12] vfio: Introduce VFIO address spaces Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 02/12] vfio: Create VFIOAddressSpace objects as needed Alexey Kardashevskiy
2013-09-05 18:24 ` Alex Williamson
2013-09-10 8:09 ` Alexey Kardashevskiy
2013-09-10 21:51 ` Alex Williamson
2013-08-30 10:15 ` Alexey Kardashevskiy [this message]
2013-09-05 18:49 ` [Qemu-devel] [PATCH v4 03/12] vfio: Add guest side IOMMU support Alex Williamson
2013-09-10 8:22 ` Alexey Kardashevskiy
2013-09-10 22:02 ` Alex Williamson
2013-09-11 6:15 ` Paolo Bonzini
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 04/12] spapr vfio: add vfio_container_spapr_get_info() Alexey Kardashevskiy
2013-09-05 19:01 ` Alex Williamson
2013-09-10 8:36 ` Alexey Kardashevskiy
2013-09-10 22:11 ` Alex Williamson
2013-09-13 10:11 ` Alexey Kardashevskiy
2013-09-25 20:29 ` Alex Williamson
2013-09-26 10:22 ` Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 05/12] spapr_pci: convert init to realize Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 06/12] spapr_pci: add spapr_pci trace Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 07/12] spapr_pci: converts fprintf to error_report Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 08/12] spapr_iommu: introduce SPAPR_TCE_TABLE class Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 09/12] spapr_iommu: add SPAPR VFIO IOMMU Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 10/12] spapr vfio: add spapr-pci-vfio-host-bridge to support vfio Alexey Kardashevskiy
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 11/12] spapr vfio: enable for spapr Alexey Kardashevskiy
2013-09-05 19:05 ` Alex Williamson
2013-09-10 9:00 ` Alexey Kardashevskiy
2013-09-10 22:13 ` Alex Williamson
2013-09-13 11:34 ` Alexey Kardashevskiy
2013-09-25 20:33 ` Alex Williamson
2013-08-30 10:15 ` [Qemu-devel] [PATCH v4 12/12] spapr kvm vfio: enable in-kernel acceleration Alexey Kardashevskiy
2013-09-05 6:43 ` [Qemu-devel] [PATCH v4 00/12] vfio on spapr-ppc64 Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377857738-14789-4-git-send-email-aik@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=agraf@suse.de \
--cc=alex.williamson@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).