qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Max Reitz <mreitz@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v5 4/8] qcow2-refcount: Move OFLAG_COPIED checks
Date: Mon,  2 Sep 2013 09:25:08 +0200	[thread overview]
Message-ID: <1378106712-29856-5-git-send-email-mreitz@redhat.com> (raw)
In-Reply-To: <1378106712-29856-1-git-send-email-mreitz@redhat.com>

Move the OFLAG_COPIED checks out of check_refcounts_l1 and
check_refcounts_l2 and after the actual refcount checks/fixes (since the
refcounts might actually change there).

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 block/qcow2-refcount.c | 115 +++++++++++++++++++++++++++++++++++--------------
 1 file changed, 82 insertions(+), 33 deletions(-)

diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index 310efcc..ddc3029 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -1035,7 +1035,7 @@ static int check_refcounts_l2(BlockDriverState *bs, BdrvCheckResult *res,
     BDRVQcowState *s = bs->opaque;
     uint64_t *l2_table, l2_entry;
     uint64_t next_contiguous_offset = 0;
-    int i, l2_size, nb_csectors, refcount;
+    int i, l2_size, nb_csectors;
 
     /* Read L2 table from disk */
     l2_size = s->l2_size * sizeof(uint64_t);
@@ -1087,23 +1087,8 @@ static int check_refcounts_l2(BlockDriverState *bs, BdrvCheckResult *res,
 
         case QCOW2_CLUSTER_NORMAL:
         {
-            /* QCOW_OFLAG_COPIED must be set iff refcount == 1 */
             uint64_t offset = l2_entry & L2E_OFFSET_MASK;
 
-            if (flags & CHECK_OFLAG_COPIED) {
-                refcount = get_refcount(bs, offset >> s->cluster_bits);
-                if (refcount < 0) {
-                    fprintf(stderr, "Can't get refcount for offset %"
-                        PRIx64 ": %s\n", l2_entry, strerror(-refcount));
-                    goto fail;
-                }
-                if ((refcount == 1) != ((l2_entry & QCOW_OFLAG_COPIED) != 0)) {
-                    fprintf(stderr, "ERROR OFLAG_COPIED: offset=%"
-                        PRIx64 " refcount=%d\n", l2_entry, refcount);
-                    res->corruptions++;
-                }
-            }
-
             if (flags & CHECK_FRAG_INFO) {
                 res->bfi.allocated_clusters++;
                 if (next_contiguous_offset &&
@@ -1160,7 +1145,7 @@ static int check_refcounts_l1(BlockDriverState *bs,
 {
     BDRVQcowState *s = bs->opaque;
     uint64_t *l1_table, l2_offset, l1_size2;
-    int i, refcount, ret;
+    int i, ret;
 
     l1_size2 = l1_size * sizeof(uint64_t);
 
@@ -1184,22 +1169,6 @@ static int check_refcounts_l1(BlockDriverState *bs,
     for(i = 0; i < l1_size; i++) {
         l2_offset = l1_table[i];
         if (l2_offset) {
-            /* QCOW_OFLAG_COPIED must be set iff refcount == 1 */
-            if (flags & CHECK_OFLAG_COPIED) {
-                refcount = get_refcount(bs, (l2_offset & ~QCOW_OFLAG_COPIED)
-                    >> s->cluster_bits);
-                if (refcount < 0) {
-                    fprintf(stderr, "Can't get refcount for l2_offset %"
-                        PRIx64 ": %s\n", l2_offset, strerror(-refcount));
-                    goto fail;
-                }
-                if ((refcount == 1) != ((l2_offset & QCOW_OFLAG_COPIED) != 0)) {
-                    fprintf(stderr, "ERROR OFLAG_COPIED: l2_offset=%" PRIx64
-                        " refcount=%d\n", l2_offset, refcount);
-                    res->corruptions++;
-                }
-            }
-
             /* Mark L2 table as used */
             l2_offset &= L1E_OFFSET_MASK;
             inc_refcounts(bs, res, refcount_table, refcount_table_size,
@@ -1231,6 +1200,80 @@ fail:
 }
 
 /*
+ * Checks the OFLAG_COPIED flag for all L1 and L2 entries.
+ *
+ * This function does not print an error message nor does it increment
+ * check_errors if get_refcount fails (this is because such an error will have
+ * been already detected and sufficiently signaled by the calling function
+ * (qcow2_check_refcounts) by the time this function is called).
+ */
+static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res)
+{
+    BDRVQcowState *s = bs->opaque;
+    uint64_t *l2_table = qemu_blockalign(bs, s->cluster_size);
+    int ret;
+    int refcount;
+    int i, j;
+
+    for (i = 0; i < s->l1_size; i++) {
+        uint64_t l1_entry = s->l1_table[i];
+        uint64_t l2_offset = l1_entry & L1E_OFFSET_MASK;
+
+        if (!l2_offset) {
+            continue;
+        }
+
+        refcount = get_refcount(bs, l2_offset >> s->cluster_bits);
+        if (refcount < 0) {
+            /* don't print message nor increment check_errors */
+            continue;
+        }
+        if ((refcount == 1) != ((l1_entry & QCOW_OFLAG_COPIED) != 0)) {
+            fprintf(stderr, "ERROR OFLAG_COPIED L2 cluster: l1_index=%d "
+                    "l1_entry=%" PRIx64 " refcount=%d\n",
+                    i, l1_entry, refcount);
+            res->corruptions++;
+        }
+
+        ret = bdrv_pread(bs->file, l2_offset, l2_table,
+                         s->l2_size * sizeof(uint64_t));
+        if (ret < 0) {
+            fprintf(stderr, "ERROR: Could not read L2 table: %s\n",
+                    strerror(-ret));
+            res->check_errors++;
+            goto fail;
+        }
+
+        for (j = 0; j < s->l2_size; j++) {
+            uint64_t l2_entry = be64_to_cpu(l2_table[j]);
+            uint64_t data_offset = l2_entry & L2E_OFFSET_MASK;
+            int cluster_type = qcow2_get_cluster_type(l2_entry);
+
+            if ((cluster_type == QCOW2_CLUSTER_NORMAL) ||
+                ((cluster_type == QCOW2_CLUSTER_ZERO) && (data_offset != 0))) {
+                refcount = get_refcount(bs, data_offset >> s->cluster_bits);
+                if (refcount < 0) {
+                    /* don't print message nor increment check_errors */
+                    continue;
+                }
+                if ((refcount == 1) != ((l2_entry & QCOW_OFLAG_COPIED) != 0)) {
+                    fprintf(stderr, "ERROR OFLAG_COPIED data cluster: "
+                            "l2_entry=%" PRIx64 " refcount=%d\n",
+                            l2_entry, refcount);
+                    res->corruptions++;
+                }
+            }
+        }
+    }
+
+    ret = 0;
+
+fail:
+    qemu_vfree(l2_table);
+    return ret;
+}
+
+/*
  * Checks an image for refcount consistency.
  *
  * Returns 0 if no errors are found, the number of errors in case the image is
@@ -1365,6 +1408,12 @@ int qcow2_check_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
         }
     }
 
+    /* check OFLAG_COPIED */
+    ret = check_oflag_copied(bs, res);
+    if (ret < 0) {
+        goto fail;
+    }
+
     res->image_end_offset = (highest_cluster + 1) * s->cluster_size;
     ret = 0;
 
-- 
1.8.3.1

  parent reply	other threads:[~2013-09-02  7:25 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-02  7:25 [Qemu-devel] [PATCH v5 0/8] Add metadata overlap checks Max Reitz
2013-09-02  7:25 ` [Qemu-devel] [PATCH v5 1/8] qcow2: Add corrupt bit Max Reitz
2013-09-02  7:25 ` [Qemu-devel] [PATCH v5 2/8] qcow2: Metadata overlap checks Max Reitz
2013-09-02  7:25 ` [Qemu-devel] [PATCH v5 3/8] qcow2: Employ metadata " Max Reitz
2013-09-02  7:25 ` Max Reitz [this message]
2013-09-02  7:25 ` [Qemu-devel] [PATCH v5 5/8] qcow2-refcount: Repair OFLAG_COPIED errors Max Reitz
2013-09-02  7:25 ` [Qemu-devel] [PATCH v5 6/8] qcow2-refcount: Repair shared refcount blocks Max Reitz
2013-09-02  7:25 ` [Qemu-devel] [PATCH v5 7/8] qcow2_check: Mark image consistent Max Reitz
2013-09-02  7:25 ` [Qemu-devel] [PATCH v5 8/8] qemu-iotests: Overlapping cluster allocations Max Reitz
2013-09-12 14:57 ` [Qemu-devel] [PATCH v5 0/8] Add metadata overlap checks Eric Blake
2013-09-12 15:24   ` Max Reitz
2013-09-13  9:57     ` Kevin Wolf
2013-09-13 10:23       ` Max Reitz
2013-09-13 12:29         ` Eric Blake
2013-09-13 12:37           ` Max Reitz
2013-09-13 14:29           ` Max Reitz
2013-09-13 14:34             ` Eric Blake
2013-09-19 15:07 ` Max Reitz
2013-09-19 17:26   ` Eric Blake
2013-09-20  8:23     ` Max Reitz
2013-09-20 10:32   ` Stefan Hajnoczi
2013-10-26 13:03     ` Max Reitz
2013-10-26 13:05       ` Max Reitz
2013-11-05  8:51       ` Stefan Hajnoczi
2013-11-14 18:37         ` Max Reitz
2013-11-15  8:13           ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1378106712-29856-5-git-send-email-mreitz@redhat.com \
    --to=mreitz@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).