qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Alex Dumitrache" <broscutamaker@gmail.com>,
	"Peter Crosthwaite" <peter.crosthwaite@xilinx.com>,
	"Giovanni Condello" <condellog@gmail.com>,
	g3gg0 <georg.hofstetter@lx-networking.de>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Paul Brook" <paul@codesourcery.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Andreas Färber" <afaerber@suse.de>,
	"Antony Pavlov" <antonynpavlov@gmail.com>
Subject: [Qemu-devel] [RFC v4 3/5] hw/arm/digic: add timer support
Date: Thu,  5 Sep 2013 11:52:57 +0400	[thread overview]
Message-ID: <1378367579-1099-4-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1378367579-1099-1-git-send-email-antonynpavlov@gmail.com>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 hw/arm/digic.c         |  26 +++++++++++
 hw/timer/Makefile.objs |   1 +
 hw/timer/digic-timer.c | 117 +++++++++++++++++++++++++++++++++++++++++++++++++
 hw/timer/digic-timer.h |  19 ++++++++
 include/hw/arm/digic.h |   7 +++
 5 files changed, 170 insertions(+)
 create mode 100644 hw/timer/digic-timer.c
 create mode 100644 hw/timer/digic-timer.h

diff --git a/hw/arm/digic.c b/hw/arm/digic.c
index 95a9fcd..5932a6a 100644
--- a/hw/arm/digic.c
+++ b/hw/arm/digic.c
@@ -30,21 +30,47 @@
 static void digic_init(Object *obj)
 {
     DigicState *s = DIGIC(obj);
+    DeviceState *dev;
+    int i;
 
     object_initialize(&s->cpu, sizeof(s->cpu), "arm946-" TYPE_ARM_CPU);
     object_property_add_child(obj, "cpu", OBJECT(&s->cpu), NULL);
+
+    for (i = 0; i < DIGIC4_NB_TIMERS; i++) {
+#define DIGIC_TIMER_NAME_MLEN    11
+        char name[DIGIC_TIMER_NAME_MLEN];
+
+        object_initialize(&s->timer[i], sizeof(s->timer[i]), TYPE_DIGIC_TIMER);
+        dev = DEVICE(&s->timer[i]);
+        qdev_set_parent_bus(dev, sysbus_get_default());
+        snprintf(name, DIGIC_TIMER_NAME_MLEN, "timer[%d]", i);
+        object_property_add_child(obj, name, OBJECT(&s->timer[i]), NULL);
+    }
 }
 
 static void digic_realize(DeviceState *dev, Error **errp)
 {
     DigicState *s = DIGIC(dev);
     Error *err = NULL;
+    SysBusDevice *sbd;
+    int i;
 
     object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
     if (err != NULL) {
         error_propagate(errp, err);
         return;
     }
+
+    for (i = 0; i < DIGIC4_NB_TIMERS; i++) {
+        object_property_set_bool(OBJECT(&s->timer[i]), true, "realized", &err);
+        if (err != NULL) {
+            error_propagate(errp, err);
+            return;
+        }
+
+        sbd = SYS_BUS_DEVICE(&s->timer[i]);
+        sysbus_mmio_map(sbd, 0, DIGIC4_TIMER_BASE(i));
+    }
 }
 
 static void digic_class_init(ObjectClass *oc, void *data)
diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
index eca5905..5479aee 100644
--- a/hw/timer/Makefile.objs
+++ b/hw/timer/Makefile.objs
@@ -25,5 +25,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o
 obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o
 obj-$(CONFIG_SH4) += sh_timer.o
 obj-$(CONFIG_TUSB6010) += tusb6010.o
+obj-$(CONFIG_DIGIC) += digic-timer.o
 
 obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c
new file mode 100644
index 0000000..75e2713
--- /dev/null
+++ b/hw/timer/digic-timer.c
@@ -0,0 +1,117 @@
+/*
+ * QEMU model of the Canon Digic timer block.
+ *
+ * Copyright (C) 2013 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This model is based on reverse engineering efforts
+ * made by CHDK (http://chdk.wikia.com) and
+ * Magic Lantern (http://www.magiclantern.fm) projects
+ * contributors.
+ *
+ * See "Timer/Clock Module" docs here:
+ *   http://magiclantern.wikia.com/wiki/Register_Map
+ *
+ * The QEMU model of the OSTimer in PKUnity SoC by Guan Xuetao
+ * is used as a template.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "hw/sysbus.h"
+#include "hw/ptimer.h"
+#include "qemu/main-loop.h"
+
+#include "hw/timer/digic-timer.h"
+
+# define DIGIC_TIMER_CONTROL 0x00
+# define DIGIC_TIMER_VALUE 0x0c
+
+static uint64_t digic_timer_read(void *opaque, hwaddr offset, unsigned size)
+{
+    DigicTimerState *s = opaque;
+    uint32_t ret = 0;
+
+    switch (offset) {
+    case DIGIC_TIMER_VALUE:
+        ret = (uint32_t)ptimer_get_count(s->ptimer);
+        ret &= 0xffff;
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP,
+                      "digic-timer: read access to unknown register 0x"
+                      TARGET_FMT_plx, offset);
+    }
+
+    return ret;
+}
+
+static void digic_timer_write(void *opaque, hwaddr offset,
+                              uint64_t value, unsigned size)
+{
+    DigicTimerState *s = opaque;
+
+    /* FIXME: without documentation every write just starts timer */
+    ptimer_set_limit(s->ptimer, 0x0000ffff, 1);
+    ptimer_run(s->ptimer, 1);
+}
+
+static const MemoryRegionOps digic_timer_ops = {
+    .read = digic_timer_read,
+    .write = digic_timer_write,
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void digic_timer_tick(void *opaque)
+{
+    DigicTimerState *s = opaque;
+
+    ptimer_run(s->ptimer, 1);
+}
+
+static void digic_timer_init(Object *obj)
+{
+    DigicTimerState *s = DIGIC_TIMER(obj);
+
+    s->bh = qemu_bh_new(digic_timer_tick, s);
+    s->ptimer = ptimer_init(s->bh);
+
+    /*
+     * FIXME: there is no documentation on Digic timer
+     * frequency setup so let it always run at 1 MHz
+     */
+    ptimer_set_freq(s->ptimer, 1 * 1000 * 1000);
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &digic_timer_ops, s,
+                          TYPE_DIGIC_TIMER, 0x100);
+    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
+}
+
+static const TypeInfo digic_timer_info = {
+    .name = TYPE_DIGIC_TIMER,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(DigicTimerState),
+    .instance_init = digic_timer_init,
+};
+
+static void digic_timer_register_type(void)
+{
+    type_register_static(&digic_timer_info);
+}
+
+type_init(digic_timer_register_type)
diff --git a/hw/timer/digic-timer.h b/hw/timer/digic-timer.h
new file mode 100644
index 0000000..6483516
--- /dev/null
+++ b/hw/timer/digic-timer.h
@@ -0,0 +1,19 @@
+#ifndef HW_TIMER_DIGIC_TIMER_H
+#define HW_TIMER_DIGIC_TIMER_H
+
+#include "hw/sysbus.h"
+#include "qemu/typedefs.h"
+#include "hw/ptimer.h"
+
+#define TYPE_DIGIC_TIMER "digic-timer"
+#define DIGIC_TIMER(obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER)
+
+typedef struct DigicTimerState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    QEMUBH *bh;
+    ptimer_state *ptimer;
+} DigicTimerState;
+
+#endif /* HW_TIMER_DIGIC_TIMER_H */
diff --git a/include/hw/arm/digic.h b/include/hw/arm/digic.h
index 0ef4723..48c9f9c 100644
--- a/include/hw/arm/digic.h
+++ b/include/hw/arm/digic.h
@@ -10,6 +10,11 @@
 
 #include "cpu-qom.h"
 
+#include "hw/timer/digic-timer.h"
+
+#define DIGIC4_NB_TIMERS 3
+#define DIGIC4_TIMER_BASE(n)    (0xc0210000 + (n) * 0x100)
+
 #define TYPE_DIGIC "digic"
 
 #define DIGIC(obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)
@@ -18,6 +23,8 @@ typedef struct DigicState {
     Object parent_obj;
 
     ARMCPU cpu;
+
+    DigicTimerState timer[DIGIC4_NB_TIMERS];
 } DigicState;
 
 #endif /* __DIGIC_H__ */
-- 
1.8.4.rc3

  parent reply	other threads:[~2013-09-05  7:55 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-05  7:52 [Qemu-devel] [RFC v4 0/5] hw/arm: add initial support for Canon DIGIC SoC Antony Pavlov
2013-09-05  7:52 ` [Qemu-devel] [RFC v4 1/5] hw/arm: add very " Antony Pavlov
2013-09-05 18:08   ` Andreas Färber
2013-09-05 21:23     ` Antony Pavlov
2013-09-05 21:38       ` Andreas Färber
2013-09-06  5:01         ` Antony Pavlov
2013-09-05  7:52 ` [Qemu-devel] [RFC v4 2/5] hw/arm/digic: prepare DIGIC-based boards support Antony Pavlov
2013-09-05 17:54   ` Peter Maydell
2013-09-06  7:12     ` Antony Pavlov
2013-09-05  7:52 ` Antony Pavlov [this message]
2013-09-05  7:52 ` [Qemu-devel] [RFC v4 4/5] hw/arm/digic: add UART support Antony Pavlov
2013-09-05 18:17   ` Peter Maydell
2013-09-06  6:54     ` Antony Pavlov
2013-09-06  7:25       ` Peter Maydell
2013-09-06 13:00         ` Antony Pavlov
2013-09-06 13:40           ` Peter Maydell
2013-09-07  5:45             ` Antony Pavlov
2013-09-07  8:33               ` Peter Maydell
2013-09-05  7:52 ` [Qemu-devel] [RFC v4 5/5] hw/arm/digic: add NOR ROM support Antony Pavlov
2013-09-05 18:19   ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1378367579-1099-4-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=afaerber@suse.de \
    --cc=broscutamaker@gmail.com \
    --cc=condellog@gmail.com \
    --cc=georg.hofstetter@lx-networking.de \
    --cc=paul@codesourcery.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.crosthwaite@xilinx.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).