From: Fam Zheng <famz@redhat.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, famz@redhat.com, mjt@tls.msk.ru,
stefanha@redhat.com, pbonzini@redhat.com, vilanova@ac.upc.edu,
rth@twiddle.net
Subject: [Qemu-devel] [RFC PATCH v3 1/5] make.rule: fix $(obj) to a real relative path
Date: Tue, 10 Sep 2013 09:02:54 +0800 [thread overview]
Message-ID: <1378774978-22602-2-git-send-email-famz@redhat.com> (raw)
In-Reply-To: <1378774978-22602-1-git-send-email-famz@redhat.com>
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is fixed in $(obj-base) before including
./Makefile.objs, to get consistency with nested Makefile rules in target
rule and variable definition.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
Makefile | 18 +++++++++++++++++-
Makefile.objs | 14 --------------
Makefile.target | 6 ++++--
configure | 1 +
rules.mak | 8 +++++---
tests/Makefile | 4 ++++
6 files changed, 31 insertions(+), 20 deletions(-)
diff --git a/Makefile b/Makefile
index 806946e..ef80f0d 100644
--- a/Makefile
+++ b/Makefile
@@ -115,14 +115,30 @@ defconfig:
ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/Makefile.objs
-include $(SRC_PATH)/tests/Makefile
endif
ifeq ($(CONFIG_SMARTCARD_NSS),y)
include $(SRC_PATH)/libcacard/Makefile
endif
+nested-vars += \
+ stub-obj-y \
+ util-obj-y \
+ qga-obj-y \
+ block-obj-y \
+ common-obj-y
+
+dummy := $(call unnest-vars)
+
+ifneq ($(wildcard config-host.mak),)
+include $(SRC_PATH)/tests/Makefile
+endif
+
all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all
+vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
+
+vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
+
config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
qemu-options.def: $(SRC_PATH)/qemu-options.hx
diff --git a/Makefile.objs b/Makefile.objs
index f46a4cd..efd5b0f 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -109,17 +109,3 @@ version-lobj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.lo
# FIXME: a few definitions from qapi-types.o/qapi-visit.o are needed
# by libqemuutil.a. These should be moved to a separate .json schema.
qga-obj-y = qga/ qapi-types.o qapi-visit.o
-
-vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
-
-vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
-
-QEMU_CFLAGS+=$(GLIB_CFLAGS)
-
-nested-vars += \
- stub-obj-y \
- util-obj-y \
- qga-obj-y \
- block-obj-y \
- common-obj-y
-dummy := $(call unnest-vars)
diff --git a/Makefile.target b/Makefile.target
index 9a49852..381022d 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -143,13 +143,15 @@ endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
-nested-vars += obj-y
+nested-vars += obj-y block-obj-y common-obj-y
# This resolves all nested paths, so it must come last
include $(SRC_PATH)/Makefile.objs
+obj-base := ..
+dummy := $(call unnest-vars)
all-obj-y = $(obj-y)
-all-obj-y += $(addprefix ../, $(common-obj-y))
+all-obj-y += $(addprefix ../, $(common-obj-y) $(block-obj-y))
ifndef CONFIG_HAIKU
LIBS+=-lm
diff --git a/configure b/configure
index e989609..cc3cd4d 100755
--- a/configure
+++ b/configure
@@ -2251,6 +2251,7 @@ fi
if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then
glib_cflags=`$pkg_config --cflags gthread-2.0`
glib_libs=`$pkg_config --libs gthread-2.0`
+ CFLAGS="$glib_cflags $CFLAGS"
LIBS="$glib_libs $LIBS"
libs_qga="$glib_libs $libs_qga"
else
diff --git a/rules.mak b/rules.mak
index 4499745..3ff7d7a 100644
--- a/rules.mak
+++ b/rules.mak
@@ -103,7 +103,7 @@ clean: clean-timestamp
# magic to descend into other directories
-obj := .
+obj = $(obj-base)
old-nested-dirs :=
define push-var
@@ -119,9 +119,11 @@ endef
define unnest-dir
$(foreach var,$(nested-vars),$(call push-var,$(var),$1/))
-$(eval obj := $(obj)/$1)
+$(eval obj-parent-$1 := $(obj))
+$(eval obj := $(if $(obj),$(obj)/$1,$1))
$(eval include $(SRC_PATH)/$1/Makefile.objs)
-$(eval obj := $(patsubst %/$1,%,$(obj)))
+$(eval obj := $(obj-parent-$1))
+$(eval obj-parent-$1 := )
$(foreach var,$(nested-vars),$(call pop-var,$(var),$1/))
endef
diff --git a/tests/Makefile b/tests/Makefile
index baba9e9..15ef039 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -110,6 +110,10 @@ test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o
$(test-obj-y): QEMU_INCLUDES += -Itests
QEMU_CFLAGS += -I$(SRC_PATH)/tests
+nested-vars := block-obj-y
+obj-base := ..
+dummy := $(call unnest-vars)
+
tests/test-x86-cpuid.o: QEMU_INCLUDES += -I$(SRC_PATH)/target-i386
tests/check-qint$(EXESUF): tests/check-qint.o libqemuutil.a
--
1.8.3.1
next prev parent reply other threads:[~2013-09-10 1:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-10 1:02 [Qemu-devel] [RFC PATCH v3 0/5] Shared Library Module Support Fam Zheng
2013-09-10 1:02 ` Fam Zheng [this message]
2013-09-10 6:34 ` [Qemu-devel] [RFC PATCH v3 1/5] make.rule: fix $(obj) to a real relative path Paolo Bonzini
2013-09-10 7:16 ` Fam Zheng
2013-09-10 7:58 ` Paolo Bonzini
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 2/5] rule.mak: allow per object cflags and libs Fam Zheng
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 3/5] Makefile: introduce common-obj-m and block-obj-m for DSO Fam Zheng
2013-09-10 6:45 ` Paolo Bonzini
2013-09-10 9:42 ` Fam Zheng
2013-09-10 10:01 ` Paolo Bonzini
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 4/5] module: implement module loading function Fam Zheng
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 5/5] block: build qed and curl as shared library Fam Zheng
2013-09-10 6:49 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378774978-22602-2-git-send-email-famz@redhat.com \
--to=famz@redhat.com \
--cc=mjt@tls.msk.ru \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=stefanha@redhat.com \
--cc=vilanova@ac.upc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).