From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, claudio.fontana@gmail.com
Subject: [Qemu-devel] [PATCH v4 14/33] tcg-aarch64: Handle zero as first argument to sub
Date: Sat, 14 Sep 2013 14:54:31 -0700 [thread overview]
Message-ID: <1379195690-6509-15-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1379195690-6509-1-git-send-email-rth@twiddle.net>
In order to properly handle neg, as generated by TCG generic code.
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
tcg/aarch64/tcg-target.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/tcg/aarch64/tcg-target.c b/tcg/aarch64/tcg-target.c
index 5b4eeee..08a0cc4 100644
--- a/tcg/aarch64/tcg-target.c
+++ b/tcg/aarch64/tcg-target.c
@@ -114,6 +114,7 @@ static inline void patch_reloc(uint8_t *code_ptr, int type,
#define TCG_CT_CONST_IS32 0x100
#define TCG_CT_CONST_AIMM 0x200
#define TCG_CT_CONST_LIMM 0x400
+#define TCG_CT_CONST_ZERO 0x800
/* parse target specific constraints */
static int target_parse_constraint(TCGArgConstraint *ct,
@@ -147,6 +148,9 @@ static int target_parse_constraint(TCGArgConstraint *ct,
case 'L': /* Valid for logical immediate. */
ct->ct |= TCG_CT_CONST_LIMM;
break;
+ case 'Z': /* zero */
+ ct->ct |= TCG_CT_CONST_ZERO;
+ break;
default:
return -1;
}
@@ -198,6 +202,9 @@ static int tcg_target_const_match(tcg_target_long val,
if ((ct & TCG_CT_CONST_LIMM) && is_limm(val)) {
return 1;
}
+ if ((ct & TCG_CT_CONST_ZERO) && val == 0) {
+ return 1;
+ }
return 0;
}
@@ -1186,6 +1193,10 @@ static void tcg_out_op(TCGContext *s, TCGOpcode opc,
TCGArg a2 = args[2];
int c2 = const_args[2];
+ /* Some operands are defined with "rZ" constraint, a register or
+ the zero register. These need not actually test args[I] == 0. */
+#define REG0(I) (const_args[I] ? TCG_REG_XZR : (TCGReg)args[I])
+
switch (opc) {
case INDEX_op_exit_tb:
tcg_out_movi(s, TCG_TYPE_I64, TCG_REG_X0, a0);
@@ -1255,9 +1266,16 @@ static void tcg_out_op(TCGContext *s, TCGOpcode opc,
/* FALLTHRU */
case INDEX_op_sub_i64:
if (c2) {
- tcg_out_addsubi(s, ext, a0, a1, -a2);
+ /* Arithmetic immediate instructions use Xn|sp, and thus
+ we cannot encode the zero register if tcg optimization
+ is turned off and both A1 and A2 are constants. */
+ if (const_args[1]) {
+ tcg_out_movi(s, ext ? TCG_TYPE_I64 : TCG_TYPE_I32, a0, -a2);
+ } else {
+ tcg_out_addsubi(s, ext, a0, a1, -a2);
+ }
} else {
- tcg_fmt_Rdnm(s, INSN_SUB, ext, a0, a1, a2);
+ tcg_fmt_Rdnm(s, INSN_SUB, ext, a0, REG0(1), a2);
}
break;
@@ -1481,6 +1499,8 @@ static void tcg_out_op(TCGContext *s, TCGOpcode opc,
/* Opcode not implemented. */
tcg_abort();
}
+
+#undef REG0
}
static const TCGTargetOpDef aarch64_op_defs[] = {
@@ -1518,8 +1538,8 @@ static const TCGTargetOpDef aarch64_op_defs[] = {
{ INDEX_op_add_i32, { "r", "r", "rwA" } },
{ INDEX_op_add_i64, { "r", "r", "rA" } },
- { INDEX_op_sub_i32, { "r", "r", "rwA" } },
- { INDEX_op_sub_i64, { "r", "r", "rA" } },
+ { INDEX_op_sub_i32, { "r", "rZ", "rwA" } },
+ { INDEX_op_sub_i64, { "r", "rZ", "rA" } },
{ INDEX_op_mul_i32, { "r", "r", "r" } },
{ INDEX_op_mul_i64, { "r", "r", "r" } },
{ INDEX_op_and_i32, { "r", "r", "rwL" } },
--
1.8.3.1
next prev parent reply other threads:[~2013-09-14 21:55 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-14 21:54 [Qemu-devel] [PATCH v4 00/33] tcg-aarch64 improvements Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 01/33] tcg-aarch64: Change all ext variables to TCGType Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 02/33] tcg-aarch64: Set ext based on TCG_OPF_64BIT Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 03/33] tcg-aarch64: Don't handle mov/movi in tcg_out_op Richard Henderson
2013-09-16 7:45 ` Claudio Fontana
2013-09-16 15:07 ` Richard Henderson
2013-09-17 8:05 ` Claudio Fontana
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 04/33] tcg-aarch64: Hoist common argument loads " Richard Henderson
2013-09-16 7:42 ` Claudio Fontana
2013-09-16 16:20 ` Richard Henderson
2013-09-17 8:01 ` Claudio Fontana
2013-09-17 14:27 ` Richard Henderson
2013-09-18 8:10 ` Claudio Fontana
2013-09-18 14:00 ` Richard Henderson
2013-09-18 14:18 ` Claudio Fontana
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 05/33] tcg-aarch64: Change enum aarch64_arith_opc to AArch64Insn Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 06/33] tcg-aarch64: Merge enum aarch64_srr_opc with AArch64Insn Richard Henderson
2013-09-16 7:56 ` Claudio Fontana
2013-09-16 15:06 ` Richard Henderson
2013-09-17 8:51 ` Claudio Fontana
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 07/33] tcg-aarch64: Remove the shift_imm parameter from tcg_out_cmp Richard Henderson
2013-09-16 8:02 ` Claudio Fontana
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 08/33] tcg-aarch64: Introduce tcg_fmt_Rdnm and tcg_fmt_Rdnm_lsl Richard Henderson
2013-09-16 8:41 ` Claudio Fontana
2013-09-16 15:32 ` Richard Henderson
2013-09-16 19:11 ` Richard Henderson
2013-09-17 8:23 ` Claudio Fontana
2013-09-17 14:54 ` Richard Henderson
2013-09-18 8:24 ` Claudio Fontana
2013-09-18 14:54 ` Richard Henderson
2013-09-18 15:01 ` Claudio Fontana
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 09/33] tcg-aarch64: Introduce tcg_fmt_Rdn_aimm Richard Henderson
2013-09-16 8:47 ` Claudio Fontana
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 10/33] tcg-aarch64: Implement mov with tcg_fmt_* functions Richard Henderson
2013-09-16 8:50 ` Claudio Fontana
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 11/33] tcg-aarch64: Handle constant operands to add, sub, and compare Richard Henderson
2013-09-16 9:02 ` Claudio Fontana
2013-09-16 15:45 ` Richard Henderson
2013-09-17 8:49 ` Claudio Fontana
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 12/33] tcg-aarch64: Handle constant operands to and, or, xor Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 13/33] tcg-aarch64: Support andc, orc, eqv, not Richard Henderson
2013-09-14 21:54 ` Richard Henderson [this message]
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 15/33] tcg-aarch64: Support movcond Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 16/33] tcg-aarch64: Use tcg_fmt_Rdnm_cond for setcond Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 17/33] tcg-aarch64: Support deposit Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 18/33] tcg-aarch64: Support add2, sub2 Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 19/33] tcg-aarch64: Support muluh, mulsh Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 20/33] tcg-aarch64: Support div, rem Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 21/33] tcg-aarch64: Introduce tcg_fmt_Rd_uimm Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 22/33] tcg-aarch64: Use MOVN in tcg_out_movi Richard Henderson
2013-09-16 9:16 ` Claudio Fontana
2013-09-16 15:50 ` Richard Henderson
2013-09-17 7:55 ` Claudio Fontana
2013-09-17 15:56 ` Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 23/33] tcg-aarch64: Use ORRI " Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 24/33] tcg-aarch64: Special case small constants " Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 25/33] tcg-aarch64: Use adrp " Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 26/33] tcg-aarch64: Avoid add with zero in tlb load Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 27/33] tcg-aarch64: Pass return address to load/store helpers directly Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 28/33] tcg-aarch64: Use tcg_out_call for qemu_ld/st Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 29/33] tcg-aarch64: Use symbolic names for branches Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 30/33] tcg-aarch64: Implement tcg_register_jit Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 31/33] tcg-aarch64: Reuse FP and LR in translated code Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 32/33] tcg-aarch64: Introduce tcg_out_ldst_pair Richard Henderson
2013-09-14 21:54 ` [Qemu-devel] [PATCH v4 33/33] tcg-aarch64: Remove redundant CPU_TLB_ENTRY_BITS check Richard Henderson
2013-09-16 9:05 ` Claudio Fontana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379195690-6509-15-git-send-email-rth@twiddle.net \
--to=rth@twiddle.net \
--cc=claudio.fontana@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).