* [Qemu-devel] [PATCH v11 1/8] ui/Makefile.objs: delete unnecessary cocoa.o dependency
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
@ 2013-09-17 8:54 ` Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 2/8] make.rule: fix $(obj) to a real relative path Fam Zheng
` (7 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Fam Zheng @ 2013-09-17 8:54 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, famz, mjt, xiawenc, kraxel, alex, pbonzini,
vilanova, rth
From: Peter Maydell <peter.maydell@linaro.org>
Delete an unnecessary dependency for cocoa.o; we already have
a general rule that tells Make that we can build a .o file
from a .m source using an ObjC compiler, so this specific
rule is unnecessary. Further, it is using the dubious construct
"$(SRC_PATH)/$(obj)" to get at the source directory, which will
break when $(obj) is redefined as part of the preparation for
per-object library support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
---
ui/Makefile.objs | 2 --
1 file changed, 2 deletions(-)
diff --git a/ui/Makefile.objs b/ui/Makefile.objs
index 6ddc0de..f33be47 100644
--- a/ui/Makefile.objs
+++ b/ui/Makefile.objs
@@ -17,6 +17,4 @@ common-obj-$(CONFIG_GTK) += gtk.o x_keymap.o
$(obj)/sdl.o $(obj)/sdl_zoom.o: QEMU_CFLAGS += $(SDL_CFLAGS)
-$(obj)/cocoa.o: $(SRC_PATH)/$(obj)/cocoa.m
-
$(obj)/gtk.o: QEMU_CFLAGS += $(GTK_CFLAGS) $(VTE_CFLAGS)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v11 2/8] make.rule: fix $(obj) to a real relative path
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 1/8] ui/Makefile.objs: delete unnecessary cocoa.o dependency Fam Zheng
@ 2013-09-17 8:54 ` Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 3/8] rule.mak: allow per object cflags and libs Fam Zheng
` (6 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Fam Zheng @ 2013-09-17 8:54 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, famz, mjt, xiawenc, kraxel, alex, pbonzini,
vilanova, rth
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
Makefile | 14 ++++++++++++++
Makefile.objs | 17 +----------------
Makefile.target | 17 +++++++++++++----
configure | 1 +
rules.mak | 14 +++++++++-----
5 files changed, 38 insertions(+), 25 deletions(-)
diff --git a/Makefile b/Makefile
index 362fe3e..b56579b 100644
--- a/Makefile
+++ b/Makefile
@@ -115,6 +115,16 @@ defconfig:
ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/Makefile.objs
+endif
+
+dummy := $(call unnest-vars,, \
+ stub-obj-y \
+ util-obj-y \
+ qga-obj-y \
+ block-obj-y \
+ common-obj-y)
+
+ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/tests/Makefile
endif
ifeq ($(CONFIG_SMARTCARD_NSS),y)
@@ -123,6 +133,10 @@ endif
all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all
+vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
+
+vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
+
config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
qemu-options.def: $(SRC_PATH)/qemu-options.hx
diff --git a/Makefile.objs b/Makefile.objs
index 2b6c1fe..91235a6 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -41,7 +41,7 @@ libcacard-y += libcacard/vcardt.o
# single QEMU executable should support all CPUs and machines.
ifeq ($(CONFIG_SOFTMMU),y)
-common-obj-y = $(block-obj-y) blockdev.o blockdev-nbd.o block/
+common-obj-y = blockdev.o blockdev-nbd.o block/
common-obj-y += net/
common-obj-y += readline.o
common-obj-y += qdev-monitor.o device-hotplug.o
@@ -110,18 +110,3 @@ version-lobj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.lo
# by libqemuutil.a. These should be moved to a separate .json schema.
qga-obj-y = qga/ qapi-types.o qapi-visit.o
qga-vss-dll-obj-y = qga/
-
-vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
-
-vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
-
-QEMU_CFLAGS+=$(GLIB_CFLAGS)
-
-nested-vars += \
- stub-obj-y \
- util-obj-y \
- qga-obj-y \
- qga-vss-dll-obj-y \
- block-obj-y \
- common-obj-y
-dummy := $(call unnest-vars)
diff --git a/Makefile.target b/Makefile.target
index 9a49852..87906ea 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -143,13 +143,22 @@ endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
-nested-vars += obj-y
+dummy := $(call unnest-vars,,obj-y)
-# This resolves all nested paths, so it must come last
+# we are making another call to unnest-vars with different vars, protect obj-y,
+# it can be overriden in subdir Makefile.objs
+obj-y-save := $(obj-y)
+
+block-obj-y :=
+common-obj-y :=
include $(SRC_PATH)/Makefile.objs
+dummy := $(call unnest-vars,..,block-obj-y common-obj-y)
+
+# Now restore obj-y
+obj-y := $(obj-y-save)
+
+all-obj-y = $(obj-y) $(common-obj-y) $(block-obj-y)
-all-obj-y = $(obj-y)
-all-obj-y += $(addprefix ../, $(common-obj-y))
ifndef CONFIG_HAIKU
LIBS+=-lm
diff --git a/configure b/configure
index 2b83936..6ac4b55 100755
--- a/configure
+++ b/configure
@@ -2279,6 +2279,7 @@ fi
if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then
glib_cflags=`$pkg_config --cflags gthread-2.0`
glib_libs=`$pkg_config --libs gthread-2.0`
+ CFLAGS="$glib_cflags $CFLAGS"
LIBS="$glib_libs $LIBS"
libs_qga="$glib_libs $libs_qga"
else
diff --git a/rules.mak b/rules.mak
index abc2e84..01e552e 100644
--- a/rules.mak
+++ b/rules.mak
@@ -110,9 +110,6 @@ clean: clean-timestamp
# magic to descend into other directories
-obj := .
-old-nested-dirs :=
-
define push-var
$(eval save-$2-$1 = $(value $1))
$(eval $1 :=)
@@ -126,9 +123,11 @@ endef
define unnest-dir
$(foreach var,$(nested-vars),$(call push-var,$(var),$1/))
-$(eval obj := $(obj)/$1)
+$(eval obj-parent-$1 := $(obj))
+$(eval obj := $(if $(obj),$(obj)/$1,$1))
$(eval include $(SRC_PATH)/$1/Makefile.objs)
-$(eval obj := $(patsubst %/$1,%,$(obj)))
+$(eval obj := $(obj-parent-$1))
+$(eval obj-parent-$1 := )
$(foreach var,$(nested-vars),$(call pop-var,$(var),$1/))
endef
@@ -143,7 +142,12 @@ $(if $(nested-dirs),
endef
define unnest-vars
+$(eval obj := $1)
+$(eval nested-vars := $2)
+$(eval old-nested-dirs := )
$(call unnest-vars-1)
+$(if $1,$(foreach v,$(nested-vars),$(eval \
+ $v := $(addprefix $1/,$($v)))))
$(foreach var,$(nested-vars),$(eval $(var) := $(filter-out %/, $($(var)))))
$(shell mkdir -p $(sort $(foreach var,$(nested-vars),$(dir $($(var))))))
$(foreach var,$(nested-vars), $(eval \
--
1.8.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v11 3/8] rule.mak: allow per object cflags and libs
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 1/8] ui/Makefile.objs: delete unnecessary cocoa.o dependency Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 2/8] make.rule: fix $(obj) to a real relative path Fam Zheng
@ 2013-09-17 8:54 ` Fam Zheng
2013-09-30 5:56 ` Wenchao Xia
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 4/8] build-sys: introduce common-obj-m and block-obj-m for DSO Fam Zheng
` (5 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Fam Zheng @ 2013-09-17 8:54 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, famz, mjt, xiawenc, kraxel, alex, pbonzini,
vilanova, rth
Adds extract-libs in LINK to expand any "per object libs", the syntax to define
such a libs options is like:
foo.o-libs := $(CURL_LIBS)
in block/Makefile.objs.
Similarly,
foo.o-cflags := $(FOO_CFLAGS)
is also supported.
"foo.o" must be listed a nested var (e.g. common-obj-y) to make the
option variables effective.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
rules.mak | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/rules.mak b/rules.mak
index 01e552e..e732261 100644
--- a/rules.mak
+++ b/rules.mak
@@ -21,15 +21,17 @@ QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(*D)/$(*F).d
# Same as -I$(SRC_PATH) -I., but for the nested source/object directories
QEMU_INCLUDES += -I$(<D) -I$(@D)
+extract-libs = $(strip $(foreach o,$1,$($o-libs)))
+
%.o: %.c
- $(call quiet-command,$(CC) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) -c -o $@ $<," CC $(TARGET_DIR)$@")
+ $(call quiet-command,$(CC) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<," CC $(TARGET_DIR)$@")
%.o: %.rc
$(call quiet-command,$(WINDRES) -I. -o $@ $<," RC $(TARGET_DIR)$@")
ifeq ($(LIBTOOL),)
LINK = $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ \
$(sort $(filter %.o, $1)) $(filter-out %.o, $1) $(version-obj-y) \
- $(LIBS)," LINK $(TARGET_DIR)$@")
+ $(call extract-libs,$^) $(LIBS)," LINK $(TARGET_DIR)$@")
else
LIBTOOL += $(if $(V),,--quiet)
%.lo: %.c
@@ -45,7 +47,7 @@ LINK = $(call quiet-command,\
$(sort $(filter %.o, $1)) $(filter-out %.o, $1) \
$(if $(filter %.lo %.la,$^),$(version-lobj-y),$(version-obj-y)) \
$(if $(filter %.lo %.la,$^),$(LIBTOOLFLAGS)) \
- $(LIBS),$(if $(filter %.lo %.la,$^),"lt LINK ", " LINK ")"$(TARGET_DIR)$@")
+ $(call extract-libs,$^) $(LIBS),$(if $(filter %.lo %.la,$^),"lt LINK ", " LINK ")"$(TARGET_DIR)$@")
endif
%.asm: %.S
@@ -121,11 +123,22 @@ $(eval $1 = $(value save-$2-$1) $$(subdir-$2-$1))
$(eval save-$2-$1 :=)
endef
+define fix-obj-vars
+$(foreach v,$($1), \
+ $(if $($v-cflags), \
+ $(eval $2$v-cflags := $($v-cflags)) \
+ $(eval $v-cflags := )) \
+ $(if $($v-libs), \
+ $(eval $2$v-libs := $($v-libs)) \
+ $(eval $v-libs := )))
+endef
+
define unnest-dir
$(foreach var,$(nested-vars),$(call push-var,$(var),$1/))
$(eval obj-parent-$1 := $(obj))
$(eval obj := $(if $(obj),$(obj)/$1,$1))
$(eval include $(SRC_PATH)/$1/Makefile.objs)
+$(foreach v,$(nested-vars),$(call fix-obj-vars,$v,$(if $(obj),$(obj)/)))
$(eval obj := $(obj-parent-$1))
$(eval obj-parent-$1 := )
$(foreach var,$(nested-vars),$(call pop-var,$(var),$1/))
--
1.8.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v11 4/8] build-sys: introduce common-obj-m and block-obj-m for DSO
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
` (2 preceding siblings ...)
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 3/8] rule.mak: allow per object cflags and libs Fam Zheng
@ 2013-09-17 8:54 ` Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 5/8] module: implement module loading Fam Zheng
` (4 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Fam Zheng @ 2013-09-17 8:54 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, famz, mjt, xiawenc, kraxel, alex, pbonzini,
vilanova, rth
Add necessary rules and flags for shared object generation.
$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does
for $(block-obj-y). The new rules introduced here are:
0) For all %.so compiling:
QEMU_CFLAGS += -fPIC
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:
foo.mo-objs := bar.o baz.o qux.o
in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.
Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
Makefile | 9 +++++++--
Makefile.objs | 2 ++
Makefile.target | 6 +++++-
configure | 14 ++++++++++++++
rules.mak | 54 +++++++++++++++++++++++++++++++++++++++++++++---------
5 files changed, 73 insertions(+), 12 deletions(-)
diff --git a/Makefile b/Makefile
index b56579b..b59b49c 100644
--- a/Makefile
+++ b/Makefile
@@ -122,7 +122,9 @@ dummy := $(call unnest-vars,, \
util-obj-y \
qga-obj-y \
block-obj-y \
- common-obj-y)
+ block-obj-m \
+ common-obj-y \
+ common-obj-m)
ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/tests/Makefile
@@ -131,7 +133,7 @@ ifeq ($(CONFIG_SMARTCARD_NSS),y)
include $(SRC_PATH)/libcacard/Makefile
endif
-all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all
+all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all modules
vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
@@ -249,6 +251,9 @@ clean:
rm -f qemu-options.def
find . -name '*.[oda]' -type f -exec rm -f {} +
find . -name '*.l[oa]' -type f -exec rm -f {} +
+ find . -name '*.so' -type f -exec rm -f {} +
+ find . -name '*.mo' -type f -exec rm -f {} +
+ find . -name '*.dll' -type f -exec rm -f {} +
rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga TAGS cscope.* *.pod *~ */*~
rm -Rf .libs
rm -f qemu-img-cmds.h
diff --git a/Makefile.objs b/Makefile.objs
index 91235a6..072d2e5 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -19,6 +19,8 @@ block-obj-y += qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
block-obj-y += qemu-coroutine-sleep.o
block-obj-y += coroutine-$(CONFIG_COROUTINE_BACKEND).o
+block-obj-m = block/
+
ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS)$(CONFIG_PCI),yyy)
# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
# only pull in the actual virtio-9p device if we also enabled virtio.
diff --git a/Makefile.target b/Makefile.target
index 87906ea..7fb9e4d 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -152,7 +152,11 @@ obj-y-save := $(obj-y)
block-obj-y :=
common-obj-y :=
include $(SRC_PATH)/Makefile.objs
-dummy := $(call unnest-vars,..,block-obj-y common-obj-y)
+dummy := $(call unnest-vars,.., \
+ block-obj-y \
+ block-obj-m \
+ common-obj-y \
+ common-obj-m)
# Now restore obj-y
obj-y := $(obj-y-save)
diff --git a/configure b/configure
index 6ac4b55..55a75d8 100755
--- a/configure
+++ b/configure
@@ -190,6 +190,9 @@ mingw32="no"
gcov="no"
gcov_tool="gcov"
EXESUF=""
+DSOSUF=".so"
+LDFLAGS_SHARED="-shared"
+modules="no"
prefix="/usr/local"
mandir="\${prefix}/share/man"
datadir="\${prefix}/share"
@@ -496,6 +499,7 @@ OpenBSD)
Darwin)
bsd="yes"
darwin="yes"
+ LDFLAGS_SHARED="-bundle"
if [ "$cpu" = "x86_64" ] ; then
QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
LDFLAGS="-arch x86_64 $LDFLAGS"
@@ -595,6 +599,7 @@ fi
if test "$mingw32" = "yes" ; then
EXESUF=".exe"
+ DSOSUF=".dll"
QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
# enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
@@ -659,6 +664,8 @@ for opt do
;;
--disable-debug-info)
;;
+ --enable-modules) modules="yes"
+ ;;
--cpu=*)
;;
--target-list=*) target_list="$optarg"
@@ -1074,6 +1081,7 @@ echo " --libdir=PATH install libraries in PATH"
echo " --sysconfdir=PATH install config in PATH$confsuffix"
echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)"
echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]"
+echo " --enable-modules enable modules support"
echo " --enable-debug-tcg enable TCG debugging"
echo " --disable-debug-tcg disable TCG debugging (default)"
echo " --enable-debug-info enable debugging information (default)"
@@ -3660,6 +3668,7 @@ echo "python $python"
if test "$slirp" = "yes" ; then
echo "smbd $smbd"
fi
+echo "module support $modules"
echo "host CPU $cpu"
echo "host big endian $bigendian"
echo "target list $target_list"
@@ -3778,6 +3787,9 @@ echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
echo "ARCH=$ARCH" >> $config_host_mak
+if test "$modules" = "yes"; then
+ echo "CONFIG_MODULES=y" >> $config_host_mak
+fi
case "$cpu" in
arm|i386|x86_64|x32|ppc|aarch64)
# The TCG interpreter currently does not support ld/st optimization.
@@ -4269,6 +4281,8 @@ echo "LIBTOOLFLAGS=$LIBTOOLFLAGS" >> $config_host_mak
echo "LIBS+=$LIBS" >> $config_host_mak
echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
echo "EXESUF=$EXESUF" >> $config_host_mak
+echo "DSOSUF=$DSOSUF" >> $config_host_mak
+echo "LDFLAGS_SHARED=$LDFLAGS_SHARED" >> $config_host_mak
echo "LIBS_QGA+=$libs_qga" >> $config_host_mak
echo "POD2MAN=$POD2MAN" >> $config_host_mak
echo "TRANSLATE_OPT_CFLAGS=$TRANSLATE_OPT_CFLAGS" >> $config_host_mak
diff --git a/rules.mak b/rules.mak
index e732261..934ad54 100644
--- a/rules.mak
+++ b/rules.mak
@@ -21,7 +21,11 @@ QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(*D)/$(*F).d
# Same as -I$(SRC_PATH) -I., but for the nested source/object directories
QEMU_INCLUDES += -I$(<D) -I$(@D)
-extract-libs = $(strip $(foreach o,$1,$($o-libs)))
+extract-libs = $(strip $(sort $(foreach o,$1,$($o-libs)) \
+ $(foreach o,$(call expand-objs,$1),$($o-libs))))
+expand-objs = $(strip $(sort $(filter %.o,$1)) \
+ $(foreach o,$(filter %.mo,$1),$($o-objs)) \
+ $(filter-out %.o %.mo,$1))
%.o: %.c
$(call quiet-command,$(CC) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<," CC $(TARGET_DIR)$@")
@@ -30,8 +34,8 @@ extract-libs = $(strip $(foreach o,$1,$($o-libs)))
ifeq ($(LIBTOOL),)
LINK = $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ \
- $(sort $(filter %.o, $1)) $(filter-out %.o, $1) $(version-obj-y) \
- $(call extract-libs,$^) $(LIBS)," LINK $(TARGET_DIR)$@")
+ $(call expand-objs,$1) $(version-obj-y) \
+ $(call extract-libs,$1) $(LIBS)," LINK $(TARGET_DIR)$@")
else
LIBTOOL += $(if $(V),,--quiet)
%.lo: %.c
@@ -42,12 +46,12 @@ LIBTOOL += $(if $(V),,--quiet)
$(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, " lt GEN $(TARGET_DIR)$@")
LINK = $(call quiet-command,\
- $(if $(filter %.lo %.la,$^),$(LIBTOOL) --mode=link --tag=CC \
+ $(if $(filter %.lo %.la,$1),$(LIBTOOL) --mode=link --tag=CC \
)$(CC) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ \
- $(sort $(filter %.o, $1)) $(filter-out %.o, $1) \
- $(if $(filter %.lo %.la,$^),$(version-lobj-y),$(version-obj-y)) \
- $(if $(filter %.lo %.la,$^),$(LIBTOOLFLAGS)) \
- $(call extract-libs,$^) $(LIBS),$(if $(filter %.lo %.la,$^),"lt LINK ", " LINK ")"$(TARGET_DIR)$@")
+ $(call expand-objs,$1) \
+ $(if $(filter %.lo %.la,$1),$(version-lobj-y),$(version-obj-y)) \
+ $(if $(filter %.lo %.la,$1),$(LIBTOOLFLAGS)) \
+ $(call extract-libs,$1) $(LIBS),$(if $(filter %.lo %.la,$1),"lt LINK ", " LINK ")"$(TARGET_DIR)$@")
endif
%.asm: %.S
@@ -65,6 +69,17 @@ endif
%.o: %.dtrace
$(call quiet-command,dtrace -o $@ -G -s $<, " GEN $(TARGET_DIR)$@")
+%$(DSOSUF): QEMU_CFLAGS += -fPIC
+%$(DSOSUF): LDFLAGS += $(LDFLAGS_SHARED) -Wl,--enable-new-dtags -Wl,-rpath,'$$ORIGIN'
+%$(DSOSUF): %.mo libqemustub.a
+ $(call LINK,$^)
+
+.PHONY: modules
+modules:
+
+%.mo:
+ $(call quiet-command,touch $@," GEN $(TARGET_DIR)$@")
+
%$(EXESUF): %.o
$(call LINK,$^)
@@ -130,7 +145,10 @@ $(foreach v,$($1), \
$(eval $v-cflags := )) \
$(if $($v-libs), \
$(eval $2$v-libs := $($v-libs)) \
- $(eval $v-libs := )))
+ $(eval $v-libs := )) \
+ $(if $($v-objs), \
+ $(eval $2$v-objs := $(addprefix $2,$($v-objs))) \
+ $(eval $v-objs := )))
endef
define unnest-dir
@@ -154,6 +172,15 @@ $(if $(nested-dirs),
$(call unnest-vars-1))
endef
+define add-modules
+$(foreach o,$(filter %.o,$($1)),
+ $(eval $(patsubst %.o,%.mo,$o): $o) \
+ $(eval $(patsubst %.o,%.mo,$o)-objs := $o))
+$(foreach o,$(filter %.mo,$($1)),$(eval \
+ $o: $($o-objs)))
+$(eval modules-m += $(patsubst %.o,%.mo,$($1)))
+endef
+
define unnest-vars
$(eval obj := $1)
$(eval nested-vars := $2)
@@ -165,4 +192,13 @@ $(foreach var,$(nested-vars),$(eval $(var) := $(filter-out %/, $($(var)))))
$(shell mkdir -p $(sort $(foreach var,$(nested-vars),$(dir $($(var))))))
$(foreach var,$(nested-vars), $(eval \
-include $(addsuffix *.d, $(sort $(dir $($(var)))))))
+$(foreach v,$(filter %-m,$(nested-vars)), \
+ $(call add-modules,$v))
+
+$(if $(CONFIG_MODULES), \
+ $(eval modules: $(patsubst %.mo,%$(DSOSUF),$(modules-m))), \
+ $(foreach v,$(filter %-m,$(nested-vars)), \
+ $(eval $(patsubst %-m,%-y,$v) += $($v)) \
+ $(eval $v := )))
+
endef
--
1.8.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v11 5/8] module: implement module loading
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
` (3 preceding siblings ...)
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 4/8] build-sys: introduce common-obj-m and block-obj-m for DSO Fam Zheng
@ 2013-09-17 8:54 ` Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 6/8] Makefile: install modules with "make install" Fam Zheng
` (3 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Fam Zheng @ 2013-09-17 8:54 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, famz, mjt, xiawenc, kraxel, alex, pbonzini,
vilanova, rth
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$(date +%s$$$RANDOM)
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
Makefile | 3 ++
configure | 32 ++++++++++-----
include/qemu/module.h | 12 ++++++
module-common.c | 10 +++++
rules.mak | 7 ++--
scripts/create_config | 14 +++++++
util/module.c | 107 +++++++++++++++++++++++++++++++++++++++++++++++++-
7 files changed, 170 insertions(+), 15 deletions(-)
create mode 100644 module-common.c
diff --git a/Makefile b/Makefile
index b59b49c..e63adeb 100644
--- a/Makefile
+++ b/Makefile
@@ -196,6 +196,9 @@ Makefile: $(version-obj-y) $(version-lobj-y)
libqemustub.a: $(stub-obj-y)
libqemuutil.a: $(util-obj-y) qapi-types.o qapi-visit.o
+block-modules = $(foreach o,$(block-obj-m),"$(basename $(subst /,-,$o))",) NULL
+util/module.o-cflags = -D'CONFIG_BLOCK_MODULES=$(block-modules)'
+
######################################################################
qemu-img.o: qemu-img-cmds.h
diff --git a/configure b/configure
index 55a75d8..9606a47 100755
--- a/configure
+++ b/configure
@@ -199,6 +199,7 @@ datadir="\${prefix}/share"
qemu_docdir="\${prefix}/share/doc/qemu"
bindir="\${prefix}/bin"
libdir="\${prefix}/lib"
+moddir="\${prefix}/lib/qemu"
libexecdir="\${prefix}/libexec"
includedir="\${prefix}/include"
sysconfdir="\${prefix}/etc"
@@ -664,7 +665,8 @@ for opt do
;;
--disable-debug-info)
;;
- --enable-modules) modules="yes"
+ --enable-modules)
+ modules="yes"
;;
--cpu=*)
;;
@@ -689,6 +691,8 @@ for opt do
;;
--libdir=*) libdir="$optarg"
;;
+ --moddir=*) moddir="$optarg"
+ ;;
--libexecdir=*) libexecdir="$optarg"
;;
--includedir=*) includedir="$optarg"
@@ -1078,6 +1082,7 @@ echo " --datadir=PATH install firmware in PATH$confsuffix"
echo " --docdir=PATH install documentation in PATH$confsuffix"
echo " --bindir=PATH install binaries in PATH"
echo " --libdir=PATH install libraries in PATH"
+echo " --moddir=PATH install modules in PATH"
echo " --sysconfdir=PATH install config in PATH$confsuffix"
echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)"
echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]"
@@ -2284,15 +2289,19 @@ if test "$mingw32" = yes; then
else
glib_req_ver=2.12
fi
-if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then
- glib_cflags=`$pkg_config --cflags gthread-2.0`
- glib_libs=`$pkg_config --libs gthread-2.0`
- CFLAGS="$glib_cflags $CFLAGS"
- LIBS="$glib_libs $LIBS"
- libs_qga="$glib_libs $libs_qga"
-else
- error_exit "glib-$glib_req_ver required to compile QEMU"
-fi
+
+for i in gthread-2.0 gmodule-2.0; do
+ if $pkg_config --atleast-version=$glib_req_ver $i; then
+ glib_cflags=`$pkg_config --cflags $i`
+ glib_libs=`$pkg_config --libs $i`
+ CFLAGS="$glib_cflags $CFLAGS"
+ LIBS="$glib_libs $LIBS"
+ libs_qga="$glib_libs $libs_qga"
+ else
+ error_exit "glib-$glib_req_ver required to compile QEMU"
+ fi
+done
+
##########################################
# pixman support probe
@@ -3643,6 +3652,7 @@ echo "Install prefix $prefix"
echo "BIOS directory `eval echo $qemu_datadir`"
echo "binary directory `eval echo $bindir`"
echo "library directory `eval echo $libdir`"
+echo "module directory `eval echo $moddir`"
echo "libexec directory `eval echo $libexecdir`"
echo "include directory `eval echo $includedir`"
echo "config directory `eval echo $sysconfdir`"
@@ -3769,6 +3779,7 @@ echo all: >> $config_host_mak
echo "prefix=$prefix" >> $config_host_mak
echo "bindir=$bindir" >> $config_host_mak
echo "libdir=$libdir" >> $config_host_mak
+echo "moddir=$moddir" >> $config_host_mak
echo "libexecdir=$libexecdir" >> $config_host_mak
echo "includedir=$includedir" >> $config_host_mak
echo "mandir=$mandir" >> $config_host_mak
@@ -3787,6 +3798,7 @@ echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
echo "ARCH=$ARCH" >> $config_host_mak
+echo "CONFIG_STAMP=$(date +%s$$$RANDOM)" >> $config_host_mak
if test "$modules" = "yes"; then
echo "CONFIG_MODULES=y" >> $config_host_mak
fi
diff --git a/include/qemu/module.h b/include/qemu/module.h
index c4ccd57..47b7f1d 100644
--- a/include/qemu/module.h
+++ b/include/qemu/module.h
@@ -14,11 +14,22 @@
#ifndef QEMU_MODULE_H
#define QEMU_MODULE_H
+#ifdef BUILD_DSO
+void DSO_STAMP_FUN(void);
+/* For error message, this function is an identification of qemu module */
+void qemu_module_dummy(void);
+
+#define module_init(function, type) \
+static void __attribute__((constructor)) do_qemu_init_ ## function(void) { \
+ register_dso_module_init(function, type); \
+}
+#else
/* This should not be used directly. Use block_init etc. instead. */
#define module_init(function, type) \
static void __attribute__((constructor)) do_qemu_init_ ## function(void) { \
register_module_init(function, type); \
}
+#endif
typedef enum {
MODULE_INIT_BLOCK,
@@ -34,6 +45,7 @@ typedef enum {
#define type_init(function) module_init(function, MODULE_INIT_QOM)
void register_module_init(void (*fn)(void), module_init_type type);
+void register_dso_module_init(void (*fn)(void), module_init_type type);
void module_call_init(module_init_type type);
diff --git a/module-common.c b/module-common.c
new file mode 100644
index 0000000..50c6750
--- /dev/null
+++ b/module-common.c
@@ -0,0 +1,10 @@
+#include "config-host.h"
+#include "qemu/module.h"
+
+void qemu_module_dummy(void)
+{
+}
+
+void DSO_STAMP_FUN(void)
+{
+}
diff --git a/rules.mak b/rules.mak
index 934ad54..e048e15 100644
--- a/rules.mak
+++ b/rules.mak
@@ -69,9 +69,9 @@ endif
%.o: %.dtrace
$(call quiet-command,dtrace -o $@ -G -s $<, " GEN $(TARGET_DIR)$@")
-%$(DSOSUF): QEMU_CFLAGS += -fPIC
+%$(DSOSUF): QEMU_CFLAGS += -fPIC -DBUILD_DSO
%$(DSOSUF): LDFLAGS += $(LDFLAGS_SHARED) -Wl,--enable-new-dtags -Wl,-rpath,'$$ORIGIN'
-%$(DSOSUF): %.mo libqemustub.a
+%$(DSOSUF): %.mo libqemustub.a module-common.o
$(call LINK,$^)
.PHONY: modules
@@ -178,7 +178,8 @@ $(foreach o,$(filter %.o,$($1)),
$(eval $(patsubst %.o,%.mo,$o)-objs := $o))
$(foreach o,$(filter %.mo,$($1)),$(eval \
$o: $($o-objs)))
-$(eval modules-m += $(patsubst %.o,%.mo,$($1)))
+$(eval t := $(patsubst %.o,%.mo,$($1)))
+$(foreach o,$t,$(eval modules-m += $o)))
endef
define unnest-vars
diff --git a/scripts/create_config b/scripts/create_config
index b1adbf5..d7ba61d 100755
--- a/scripts/create_config
+++ b/scripts/create_config
@@ -26,6 +26,17 @@ case $line in
# save for the next definitions
prefix=${line#*=}
;;
+ moddir=*)
+ eval "moddir=\"${line#*=}\""
+ echo "#define CONFIG_MODDIR \"$moddir\""
+ ;;
+ CONFIG_STAMP=*)
+ echo "#define DSO_STAMP_FUN qemu_stamp_${line#*=}"
+ echo "#define DSO_STAMP_FUN_STR \"qemu_stamp_${line#*=}\""
+ ;;
+ CONFIG_MODULES=*)
+ echo "#define CONFIG_MODULES \"${line#*=}\""
+ ;;
CONFIG_AUDIO_DRIVERS=*)
drivers=${line#*=}
echo "#define CONFIG_AUDIO_DRIVERS \\"
@@ -104,6 +115,9 @@ case $line in
value=${line#*=}
echo "#define $name $value"
;;
+ DSOSUF=*)
+ echo "#define HOST_DSOSUF \"${line#*=}\""
+ ;;
esac
done # read
diff --git a/util/module.c b/util/module.c
index 7acc33d..c4115be 100644
--- a/util/module.c
+++ b/util/module.c
@@ -13,6 +13,7 @@
* GNU GPL, version 2 or (at your option) any later version.
*/
+#include <gmodule.h>
#include "qemu-common.h"
#include "qemu/queue.h"
#include "qemu/module.h"
@@ -21,13 +22,16 @@ typedef struct ModuleEntry
{
void (*init)(void);
QTAILQ_ENTRY(ModuleEntry) node;
+ module_init_type type;
} ModuleEntry;
typedef QTAILQ_HEAD(, ModuleEntry) ModuleTypeList;
static ModuleTypeList init_type_list[MODULE_INIT_MAX];
-static void init_types(void)
+static ModuleTypeList dso_init_list;
+
+static void init_lists(void)
{
static int inited;
int i;
@@ -40,6 +44,8 @@ static void init_types(void)
QTAILQ_INIT(&init_type_list[i]);
}
+ QTAILQ_INIT(&dso_init_list);
+
inited = 1;
}
@@ -48,7 +54,7 @@ static ModuleTypeList *find_type(module_init_type type)
{
ModuleTypeList *l;
- init_types();
+ init_lists();
l = &init_type_list[type];
@@ -62,20 +68,117 @@ void register_module_init(void (*fn)(void), module_init_type type)
e = g_malloc0(sizeof(*e));
e->init = fn;
+ e->type = type;
l = find_type(type);
QTAILQ_INSERT_TAIL(l, e, node);
}
+void register_dso_module_init(void (*fn)(void), module_init_type type)
+{
+ ModuleEntry *e;
+
+ init_lists();
+
+ e = g_malloc0(sizeof(*e));
+ e->init = fn;
+ e->type = type;
+
+ QTAILQ_INSERT_TAIL(&dso_init_list, e, node);
+}
+
+static void module_load(module_init_type type);
+
void module_call_init(module_init_type type)
{
ModuleTypeList *l;
ModuleEntry *e;
+ module_load(type);
l = find_type(type);
QTAILQ_FOREACH(e, l, node) {
e->init();
}
}
+
+#ifdef CONFIG_MODULES
+static void module_load_file(const char *fname)
+{
+ GModule *g_module;
+ void (*sym)(void);
+ const char *dsosuf = HOST_DSOSUF;
+ int len = strlen(fname);
+ int suf_len = strlen(dsosuf);
+ ModuleEntry *e, *next;
+
+ if (len <= suf_len || strcmp(&fname[len - suf_len], dsosuf)) {
+ /* wrong suffix */
+ return;
+ }
+ if (access(fname, F_OK)) {
+ return;
+ }
+
+ assert(QTAILQ_EMPTY(&dso_init_list));
+
+ g_module = g_module_open(fname, G_MODULE_BIND_LAZY | G_MODULE_BIND_LOCAL);
+ if (!g_module) {
+ fprintf(stderr, "Failed to load module: %s\n",
+ g_module_error());
+ return;
+ }
+ if (!g_module_symbol(g_module, DSO_STAMP_FUN_STR, (gpointer *)&sym)) {
+ fprintf(stderr, "Failed to initialize module: %s\n",
+ fname);
+ /* Print some info if this is a QEMU module (but from different build),
+ * this will make debugging user problems easier. */
+ if (g_module_symbol(g_module, "qemu_module_dummy", (gpointer *)&sym)) {
+ fprintf(stderr,
+ "Note: only modules from the same build can be loaded.\n");
+ }
+ g_module_close(g_module);
+ } else {
+ QTAILQ_FOREACH(e, &dso_init_list, node) {
+ register_module_init(e->init, e->type);
+ }
+ }
+
+ QTAILQ_FOREACH_SAFE(e, &dso_init_list, node, next) {
+ QTAILQ_REMOVE(&dso_init_list, e, node);
+ g_free(e);
+ }
+}
+#endif
+
+void module_load(module_init_type type)
+{
+#ifdef CONFIG_MODULES
+ char *fname = NULL;
+ const char **mp;
+ static const char *block_modules[] = {
+ CONFIG_BLOCK_MODULES
+ };
+
+ if (!g_module_supported()) {
+ return;
+ }
+
+ switch (type) {
+ case MODULE_INIT_BLOCK:
+ mp = block_modules;
+ break;
+ /* no other types have dynamic modules for now*/
+ default:
+ return;
+ }
+
+ for ( ; *mp; mp++) {
+ fname = g_strdup_printf("%s/%s%s", CONFIG_MODDIR, *mp, HOST_DSOSUF);
+ module_load_file(fname);
+ g_free(fname);
+ }
+
+#endif
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v11 6/8] Makefile: install modules with "make install"
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
` (4 preceding siblings ...)
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 5/8] module: implement module loading Fam Zheng
@ 2013-09-17 8:54 ` Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 7/8] .gitignore: ignore module related files (dll, so, mo) Fam Zheng
` (2 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Fam Zheng @ 2013-09-17 8:54 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, famz, mjt, xiawenc, kraxel, alex, pbonzini,
vilanova, rth
Install all the modules to ${MODDIR}.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
Makefile | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Makefile b/Makefile
index e63adeb..4f4d1af 100644
--- a/Makefile
+++ b/Makefile
@@ -363,6 +363,12 @@ install-datadir install-localstatedir
ifneq ($(TOOLS),)
$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
endif
+ifneq ($(CONFIG_MODULES),)
+ $(INSTALL_DIR) "$(DESTDIR)$(moddir)"
+ for s in $(patsubst %.mo,%$(DSOSUF),$(modules-m)); do \
+ $(INSTALL_PROG) $(STRIP_OPT) $$s "$(DESTDIR)$(moddir)/$${s//\//-}"; \
+ done
+endif
ifneq ($(HELPERS-y),)
$(INSTALL_DIR) "$(DESTDIR)$(libexecdir)"
$(INSTALL_PROG) $(STRIP_OPT) $(HELPERS-y) "$(DESTDIR)$(libexecdir)"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v11 7/8] .gitignore: ignore module related files (dll, so, mo)
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
` (5 preceding siblings ...)
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 6/8] Makefile: install modules with "make install" Fam Zheng
@ 2013-09-17 8:54 ` Fam Zheng
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 8/8] block: convert block drivers linked with libs to modules Fam Zheng
2013-09-26 13:26 ` [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
8 siblings, 0 replies; 14+ messages in thread
From: Fam Zheng @ 2013-09-17 8:54 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, famz, mjt, xiawenc, kraxel, alex, pbonzini,
vilanova, rth
Signed-off-by: Fam Zheng <famz@redhat.com>
---
.gitignore | 3 +++
1 file changed, 3 insertions(+)
diff --git a/.gitignore b/.gitignore
index 8e1b73f..ac679ea 100644
--- a/.gitignore
+++ b/.gitignore
@@ -63,6 +63,9 @@ fsdev/virtfs-proxy-helper.pod
*.cp
*.dvi
*.exe
+*.dll
+*.so
+*.mo
*.fn
*.ky
*.log
--
1.8.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v11 8/8] block: convert block drivers linked with libs to modules
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
` (6 preceding siblings ...)
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 7/8] .gitignore: ignore module related files (dll, so, mo) Fam Zheng
@ 2013-09-17 8:54 ` Fam Zheng
2013-09-26 13:26 ` [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
8 siblings, 0 replies; 14+ messages in thread
From: Fam Zheng @ 2013-09-17 8:54 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, famz, mjt, xiawenc, kraxel, alex, pbonzini,
vilanova, rth
The converted block drivers are:
curl
iscsi
rbd
ssh
glusterfs
no longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block/Makefile.objs | 11 ++++++++++-
configure | 33 +++++++++++++++------------------
2 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/block/Makefile.objs b/block/Makefile.objs
index 3bb85b5..f98d379 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -23,4 +23,13 @@ common-obj-y += commit.o
common-obj-y += mirror.o
common-obj-y += backup.o
-$(obj)/curl.o: QEMU_CFLAGS+=$(CURL_CFLAGS)
+iscsi.o-cflags := $(LIBISCSI_CFLAGS)
+iscsi.o-libs := $(LIBISCSI_LIBS)
+curl.o-cflags := $(CURL_CFLAGS)
+curl.o-libs := $(CURL_LIBS)
+rbd.o-cflags := $(RBD_CFLAGS)
+rbd.o-libs := $(RBD_LIBS)
+gluster.o-cflags := $(GLUSTERFS_CFLAGS)
+gluster.o-libs := $(GLUSTERFS_LIBS)
+ssh.o-cflags := $(LIBSSH2_CFLAGS)
+ssh.o-libs := $(LIBSSH2_LIBS)
diff --git a/configure b/configure
index 9606a47..e986ef6 100755
--- a/configure
+++ b/configure
@@ -2250,8 +2250,6 @@ EOF
curl_libs=`$curlconfig --libs 2>/dev/null`
if compile_prog "$curl_cflags" "$curl_libs" ; then
curl=yes
- libs_tools="$curl_libs $libs_tools"
- libs_softmmu="$curl_libs $libs_softmmu"
else
if test "$curl" = "yes" ; then
feature_not_found "curl"
@@ -2411,8 +2409,6 @@ EOF
rbd_libs="-lrbd -lrados"
if compile_prog "" "$rbd_libs" ; then
rbd=yes
- libs_tools="$rbd_libs $libs_tools"
- libs_softmmu="$rbd_libs $libs_softmmu"
else
if test "$rbd" = "yes" ; then
feature_not_found "rados block device"
@@ -2429,9 +2425,6 @@ if test "$libssh2" != "no" ; then
libssh2_cflags=`$pkg_config libssh2 --cflags`
libssh2_libs=`$pkg_config libssh2 --libs`
libssh2=yes
- libs_tools="$libssh2_libs $libs_tools"
- libs_softmmu="$libssh2_libs $libs_softmmu"
- QEMU_CFLAGS="$QEMU_CFLAGS $libssh2_cflags"
else
if test "$libssh2" = "yes" ; then
error_exit "libssh2 >= $min_libssh2_version required for --enable-libssh2"
@@ -2647,9 +2640,6 @@ if test "$glusterfs" != "no" ; then
glusterfs="yes"
glusterfs_cflags=`$pkg_config --cflags glusterfs-api`
glusterfs_libs=`$pkg_config --libs glusterfs-api`
- CFLAGS="$CFLAGS $glusterfs_cflags"
- libs_tools="$glusterfs_libs $libs_tools"
- libs_softmmu="$glusterfs_libs $libs_softmmu"
if $pkg_config --atleast-version=5 glusterfs-api; then
glusterfs_discard="yes"
fi
@@ -3017,11 +3007,9 @@ EOF
libiscsi="yes"
libiscsi_cflags=$($pkg_config --cflags libiscsi)
libiscsi_libs=$($pkg_config --libs libiscsi)
- CFLAGS="$CFLAGS $libiscsi_cflags"
- LIBS="$LIBS $libiscsi_libs"
elif compile_prog "" "-liscsi" ; then
libiscsi="yes"
- LIBS="$LIBS -liscsi"
+ libiscsi_libs="-liscsi"
else
if test "$libiscsi" = "yes" ; then
feature_not_found "libiscsi"
@@ -4002,8 +3990,9 @@ if test "$bswap_h" = "yes" ; then
echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak
fi
if test "$curl" = "yes" ; then
- echo "CONFIG_CURL=y" >> $config_host_mak
+ echo "CONFIG_CURL=m" >> $config_host_mak
echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak
+ echo "CURL_LIBS=$curl_libs" >> $config_host_mak
fi
if test "$brlapi" = "yes" ; then
echo "CONFIG_BRLAPI=y" >> $config_host_mak
@@ -4092,7 +4081,9 @@ if test "$glx" = "yes" ; then
fi
if test "$libiscsi" = "yes" ; then
- echo "CONFIG_LIBISCSI=y" >> $config_host_mak
+ echo "CONFIG_LIBISCSI=m" >> $config_host_mak
+ echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
+ echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak
fi
if test "$seccomp" = "yes"; then
@@ -4113,7 +4104,9 @@ if test "$qom_cast_debug" = "yes" ; then
echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
fi
if test "$rbd" = "yes" ; then
- echo "CONFIG_RBD=y" >> $config_host_mak
+ echo "CONFIG_RBD=m" >> $config_host_mak
+ echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+ echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
fi
echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
@@ -4151,7 +4144,9 @@ if test "$getauxval" = "yes" ; then
fi
if test "$glusterfs" = "yes" ; then
- echo "CONFIG_GLUSTERFS=y" >> $config_host_mak
+ echo "CONFIG_GLUSTERFS=m" >> $config_host_mak
+ echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak
+ echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
fi
if test "$glusterfs_discard" = "yes" ; then
@@ -4159,7 +4154,9 @@ if test "$glusterfs_discard" = "yes" ; then
fi
if test "$libssh2" = "yes" ; then
- echo "CONFIG_LIBSSH2=y" >> $config_host_mak
+ echo "CONFIG_LIBSSH2=m" >> $config_host_mak
+ echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
+ echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
fi
if test "$virtio_blk_data_plane" = "yes" ; then
--
1.8.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support
2013-09-17 8:54 [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
` (7 preceding siblings ...)
2013-09-17 8:54 ` [Qemu-devel] [PATCH v11 8/8] block: convert block drivers linked with libs to modules Fam Zheng
@ 2013-09-26 13:26 ` Fam Zheng
2013-10-04 14:48 ` Stefan Hajnoczi
8 siblings, 1 reply; 14+ messages in thread
From: Fam Zheng @ 2013-09-26 13:26 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, peter.maydell, stefanha, mjt, xiawenc, kraxel, alex,
anthony, pbonzini, vilanova, rth
On Tue, 09/17 16:54, Fam Zheng wrote:
> This series implements feature of shared object building as described in:
>
> http://wiki.qemu.org/Features/Modules
>
> The main idea behind modules is to isolate dependencies on third party
> libraries from qemu executables, such as libglusterfs or librbd, so that the
> end users can install core qemu package with fewer dependencies. And only for
> those who want to use particular modules, need they install qemu-foo
> sub-package, which in turn requires libbar and libbiz packages.
>
> It's implemented in three steps:
>
> 1. The first patches fix current build system to correctly handle nested
> variables and object specific options:
>
> [01/08] ui/Makefile.objs: delete unnecessary cocoa.o dependency
> [02/08] make.rule: fix $(obj) to a real relative path
> [03/08] rule.mak: allow per object cflags and libs
>
> 2. The Makefile changes adds necessary options and rules to build DSO objects:
>
> [04/08] build-sys: introduce common-obj-m and block-obj-m for DSO
>
> 3. The next patch adds code to load modules from installed directory:
>
> [05/08] module: implement module loading
>
> A few more changes are following to complete it:
>
> [06/08] Makefile: install modules with "make install"
> [07/08] .gitignore: ignore module related files (dll, so, mo)
>
> In the end of series, the block drivers are converted:
>
> [08/08] block: convert block drivers linked with libs to modules
>
Ping?
> v11:
> [04] Link DSO with -Wl,--enable-new-dtags -Wl,-rpath,'$$ORIGIN' (Richard)
I don't fully understand the portability issue with this flag yet, is this OK
to keep or should be dropped? Any opinions?
Thanks,
Fam
> [05] Reuse module_init_type in module_load, no separate load type enums.
> Separate list of modules by type. It's simply list of built modules
> now. No whitelist option in configure.
> Support multiple module_init() in single module.
>
[...]
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support
2013-09-26 13:26 ` [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support Fam Zheng
@ 2013-10-04 14:48 ` Stefan Hajnoczi
2013-10-04 15:09 ` Michael Tokarev
2013-10-04 15:24 ` Paolo Bonzini
0 siblings, 2 replies; 14+ messages in thread
From: Stefan Hajnoczi @ 2013-10-04 14:48 UTC (permalink / raw)
To: Fam Zheng
Cc: Kevin Wolf, Peter Maydell, Alex Bligh, Michael Tokarev,
qemu-devel, Lluís Vilanova, Gerd Hoffmann, Stefan Hajnoczi,
Anthony Liguori, Paolo Bonzini, Wayne Xia, Richard Henderson
On Thu, Sep 26, 2013 at 3:26 PM, Fam Zheng <famz@redhat.com> wrote:
> On Tue, 09/17 16:54, Fam Zheng wrote:
>> This series implements feature of shared object building as described in:
>>
>> http://wiki.qemu.org/Features/Modules
>>
>> The main idea behind modules is to isolate dependencies on third party
>> libraries from qemu executables, such as libglusterfs or librbd, so that the
>> end users can install core qemu package with fewer dependencies. And only for
>> those who want to use particular modules, need they install qemu-foo
>> sub-package, which in turn requires libbar and libbiz packages.
>>
>> It's implemented in three steps:
>>
>> 1. The first patches fix current build system to correctly handle nested
>> variables and object specific options:
>>
>> [01/08] ui/Makefile.objs: delete unnecessary cocoa.o dependency
>> [02/08] make.rule: fix $(obj) to a real relative path
>> [03/08] rule.mak: allow per object cflags and libs
>>
>> 2. The Makefile changes adds necessary options and rules to build DSO objects:
>>
>> [04/08] build-sys: introduce common-obj-m and block-obj-m for DSO
>>
>> 3. The next patch adds code to load modules from installed directory:
>>
>> [05/08] module: implement module loading
>>
>> A few more changes are following to complete it:
>>
>> [06/08] Makefile: install modules with "make install"
>> [07/08] .gitignore: ignore module related files (dll, so, mo)
>>
>> In the end of series, the block drivers are converted:
>>
>> [08/08] block: convert block drivers linked with libs to modules
>>
>
> Ping?
>
>> v11:
>> [04] Link DSO with -Wl,--enable-new-dtags -Wl,-rpath,'$$ORIGIN' (Richard)
>
> I don't fully understand the portability issue with this flag yet, is this OK
> to keep or should be dropped? Any opinions?
Ping^2
This series will be useful for enabling block drivers with library
dependencies, so I hope we can merge it soon. Today, package
maintainers must make a choice about the "right" set of features to
include in their QEMU build. With modules they can simply build
everything and ship individual packages.
Stefan
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support
2013-10-04 14:48 ` Stefan Hajnoczi
@ 2013-10-04 15:09 ` Michael Tokarev
2013-10-04 15:24 ` Paolo Bonzini
1 sibling, 0 replies; 14+ messages in thread
From: Michael Tokarev @ 2013-10-04 15:09 UTC (permalink / raw)
To: Fam Zheng
Cc: Kevin Wolf, Peter Maydell, Alex Bligh, Stefan Hajnoczi,
qemu-devel, Lluís Vilanova, Gerd Hoffmann, Stefan Hajnoczi,
Anthony Liguori, Paolo Bonzini, Wayne Xia, Richard Henderson
04.10.2013 18:48, Stefan Hajnoczi wrote:
> On Thu, Sep 26, 2013 at 3:26 PM, Fam Zheng <famz@redhat.com> wrote:
>> On Tue, 09/17 16:54, Fam Zheng wrote:
>>> This series implements feature of shared object building as described in:
>>>
>>> http://wiki.qemu.org/Features/Modules
>>>
>>> The main idea behind modules is to isolate dependencies on third party
>>> libraries from qemu executables, such as libglusterfs or librbd, so that the
>>> end users can install core qemu package with fewer dependencies. And only for
>>> those who want to use particular modules, need they install qemu-foo
>>> sub-package, which in turn requires libbar and libbiz packages.
>>>
>>> It's implemented in three steps:
>>>
>>> 1. The first patches fix current build system to correctly handle nested
>>> variables and object specific options:
>>>
>>> [01/08] ui/Makefile.objs: delete unnecessary cocoa.o dependency
>>> [02/08] make.rule: fix $(obj) to a real relative path
>>> [03/08] rule.mak: allow per object cflags and libs
>>>
>>> 2. The Makefile changes adds necessary options and rules to build DSO objects:
>>>
>>> [04/08] build-sys: introduce common-obj-m and block-obj-m for DSO
>>>
>>> 3. The next patch adds code to load modules from installed directory:
>>>
>>> [05/08] module: implement module loading
>>>
>>> A few more changes are following to complete it:
>>>
>>> [06/08] Makefile: install modules with "make install"
>>> [07/08] .gitignore: ignore module related files (dll, so, mo)
>>>
>>> In the end of series, the block drivers are converted:
>>>
>>> [08/08] block: convert block drivers linked with libs to modules
All the series:
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Thank you for the good work!
/mjt
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] [PATCH v11 0/8] Shared Library Module Support
2013-10-04 14:48 ` Stefan Hajnoczi
2013-10-04 15:09 ` Michael Tokarev
@ 2013-10-04 15:24 ` Paolo Bonzini
1 sibling, 0 replies; 14+ messages in thread
From: Paolo Bonzini @ 2013-10-04 15:24 UTC (permalink / raw)
To: Stefan Hajnoczi
Cc: Kevin Wolf, Peter Maydell, Fam Zheng, Alex Bligh, Michael Tokarev,
qemu-devel, Lluís Vilanova, Gerd Hoffmann, Stefan Hajnoczi,
Anthony Liguori, Wayne Xia, Richard Henderson
Il 04/10/2013 16:48, Stefan Hajnoczi ha scritto:
>> >
>>> >> v11:
>>> >> [04] Link DSO with -Wl,--enable-new-dtags -Wl,-rpath,'$$ORIGIN' (Richard)
>> >
>> > I don't fully understand the portability issue with this flag yet, is this OK
>> > to keep or should be dropped? Any opinions?
> Ping^2
This was only meant as an idea about how to use shared libraries for
common parts of e.g. SPICE. It's not yet necessary.
Paolo
> This series will be useful for enabling block drivers with library
> dependencies, so I hope we can merge it soon. Today, package
> maintainers must make a choice about the "right" set of features to
> include in their QEMU build. With modules they can simply build
> everything and ship individual packages.
^ permalink raw reply [flat|nested] 14+ messages in thread