qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: qemu-stable@nongnu.org
Subject: [Qemu-devel] [PATCH 02/38] gdbstub: Fix gdb_register_coprocessor() register counting
Date: Wed, 25 Sep 2013 07:57:30 -0500	[thread overview]
Message-ID: <1380113886-16845-3-git-send-email-mdroth@linux.vnet.ibm.com> (raw)
In-Reply-To: <1380113886-16845-1-git-send-email-mdroth@linux.vnet.ibm.com>

From: Andreas Färber <afaerber@suse.de>

Commit a0e372f0c49ac01faeaeb73a6e8f50e8ac615f34 reorganized the register
counting for GDB. While it seems correct not to let the total number of
registers skyrocket in an SMP scenario through a static variable, the
distinction between total register count and 'g' packet register count
(last_reg vs. num_g_regs) got lost among the way.

Fix this by introducing CPUState::gdb_num_g_regs and using that in
gdb_handle_packet().

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org (stable-1.6)
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 35143f0164e6933a85c7c2b8a89a040d881a9151)

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
---
 gdbstub.c         |    6 ++++--
 include/qom/cpu.h |    2 ++
 qom/cpu.c         |    2 +-
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index 1af25a6..9d067d6 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -621,6 +621,8 @@ void gdb_register_coprocessor(CPUState *cpu,
         if (g_pos != s->base_reg) {
             fprintf(stderr, "Error: Bad gdb register numbering for '%s'\n"
                     "Expected %d got %d\n", xml, g_pos, s->base_reg);
+        } else {
+            cpu->gdb_num_g_regs = cpu->gdb_num_regs;
         }
     }
 }
@@ -902,7 +904,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
     case 'g':
         cpu_synchronize_state(s->g_cpu);
         len = 0;
-        for (addr = 0; addr < s->g_cpu->gdb_num_regs; addr++) {
+        for (addr = 0; addr < s->g_cpu->gdb_num_g_regs; addr++) {
             reg_size = gdb_read_register(s->g_cpu, mem_buf + len, addr);
             len += reg_size;
         }
@@ -914,7 +916,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
         registers = mem_buf;
         len = strlen(p) / 2;
         hextomem((uint8_t *)registers, p, len);
-        for (addr = 0; addr < s->g_cpu->gdb_num_regs && len > 0; addr++) {
+        for (addr = 0; addr < s->g_cpu->gdb_num_g_regs && len > 0; addr++) {
             reg_size = gdb_write_register(s->g_cpu, registers, addr);
             len -= reg_size;
             registers += reg_size;
diff --git a/include/qom/cpu.h b/include/qom/cpu.h
index 0d6e95c..3e49936 100644
--- a/include/qom/cpu.h
+++ b/include/qom/cpu.h
@@ -152,6 +152,7 @@ struct kvm_run;
  * @current_tb: Currently executing TB.
  * @gdb_regs: Additional GDB registers.
  * @gdb_num_regs: Number of total registers accessible to GDB.
+ * @gdb_num_g_regs: Number of registers in GDB 'g' packets.
  * @next_cpu: Next CPU sharing TB cache.
  * @kvm_fd: vCPU file descriptor for KVM.
  *
@@ -188,6 +189,7 @@ struct CPUState {
     struct TranslationBlock *current_tb;
     struct GDBRegisterState *gdb_regs;
     int gdb_num_regs;
+    int gdb_num_g_regs;
     CPUState *next_cpu;
 
     int kvm_fd;
diff --git a/qom/cpu.c b/qom/cpu.c
index aa95108..e71e57b 100644
--- a/qom/cpu.c
+++ b/qom/cpu.c
@@ -240,7 +240,7 @@ static void cpu_common_initfn(Object *obj)
     CPUState *cpu = CPU(obj);
     CPUClass *cc = CPU_GET_CLASS(obj);
 
-    cpu->gdb_num_regs = cc->gdb_num_core_regs;
+    cpu->gdb_num_regs = cpu->gdb_num_g_regs = cc->gdb_num_core_regs;
 }
 
 static int64_t cpu_common_get_arch_id(CPUState *cpu)
-- 
1.7.9.5

  parent reply	other threads:[~2013-09-25 12:58 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-25 12:57 [Qemu-devel] Patch Round-up for stable 1.6.1, freeze on 2013-09-30 Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 01/38] block: ensure bdrv_drain_all() works during bdrv_delete() Michael Roth
2013-09-25 12:57 ` Michael Roth [this message]
2013-09-25 12:57 ` [Qemu-devel] [PATCH 03/38] target-ppc: fix bit extraction for FPBF and FPL Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 04/38] rdma: silly ipv6 bugfix Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 05/38] scripts/qapi.py: Avoid syntax not supported by Python 2.4 Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 06/38] usb/dev-hid: Modified usb-tablet category from Misc to Input Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 07/38] scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 08/38] pc: fix regression for 64 bit PCI memory Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 09/38] pseries: Fix stalls on hypervisor virtual console Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 10/38] virtio: virtqueue_get_avail_bytes: fix desc_pa when loop over the indirect descriptor table Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 11/38] xhci: fix endpoint interval calculation Michael Roth
2013-09-25 13:41   ` Gerd Hoffmann
2013-09-25 12:57 ` [Qemu-devel] [PATCH 12/38] Revert "usb-hub: report status changes only once" Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 13/38] block: expect errors from bdrv_co_is_allocated Michael Roth
2013-09-25 21:27   ` [Qemu-devel] [Qemu-stable] " Doug Goldstein
2013-09-26 20:51     ` Paolo Bonzini
2013-09-25 12:57 ` [Qemu-devel] [PATCH 14/38] target-i386: fix disassembly with PAE=1, PG=0 Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 15/38] adlib: sort offsets in portio registration Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 16/38] exec: fix writing to MMIO area with non-power-of-two length Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 17/38] virtio_pci: fix level interrupts with irqfd Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 18/38] exec: always use MADV_DONTFORK Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 19/38] xhci: reset port when disabling slot Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 20/38] usb: parallelize usb3 streams Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 21/38] w32: Fix access to host devices (regression) Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 22/38] memory: Provide separate handling of unassigned io ports accesses Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 23/38] Revert "memory: Return -1 again on reads from unsigned regions" Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 24/38] exec: check offset_within_address_space for register subpage Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 25/38] ne2000: mark I/O as LITTLE_ENDIAN Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 26/38] ehci: save device pointer in EHCIState Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 27/38] qxl: fix local renderer Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 28/38] pc: Initializing ram_memory under Xen Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 29/38] pc_q35: Initialize Xen Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 30/38] qapi-types.py: Fix enum struct sizes on i686 Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 31/38] pcnet-pci: mark I/O and MMIO as LITTLE_ENDIAN Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 32/38] chardev: fix pty_chr_timer Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 33/38] kvmvapic: Catch invalid ROM size Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 34/38] kvmvapic: Enter inactive state on hardware reset Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 35/38] kvmvapic: Clear also physical ROM address when entering INACTIVE state Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 36/38] tci: Fix qemu-alpha on 32 bit hosts (wrong assertions) Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 37/38] blockdev: do not default cache.no-flush to true Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 38/38] virtio-blk: do not relay a previous driver's WCE configuration to the current Michael Roth
2013-09-25 13:54 ` [Qemu-devel] [Qemu-stable] Patch Round-up for stable 1.6.1, freeze on 2013-09-30 Cole Robinson
2013-09-25 21:43   ` Doug Goldstein
2013-09-26 20:53   ` Paolo Bonzini
2013-09-26  4:53 ` [Qemu-devel] " Stefan Weil
2013-09-26  5:22 ` Fam Zheng
2013-09-26 19:38 ` Stefan Weil
2013-09-27  7:30   ` Michael Tokarev
2013-09-27  8:07 ` [Qemu-devel] [Qemu-stable] " Michael Tokarev
2013-09-27  8:11   ` Michael Tokarev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1380113886-16845-3-git-send-email-mdroth@linux.vnet.ibm.com \
    --to=mdroth@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).