From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 20/61] block: qemu-iotests for vhdx, read sample dynamic image
Date: Fri, 11 Oct 2013 17:05:10 +0200 [thread overview]
Message-ID: <1381503951-27985-21-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1381503951-27985-1-git-send-email-kwolf@redhat.com>
From: Jeff Cody <jcody@redhat.com>
This adds the VHDX format to the qemu-iotests format, and adds
a read test. The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.
The image file is a 1GB dynamic image, with 32MB blocks.
The pattern 0xa5 exists from 0MB-33MB (past a block size boundary)
The pattern 0x96 exists from 33MB-66MB (past another block boundary,
and leaving a partial blank block)
>From 66MB-1024MB, all reads should return 0.
Although 1GB dynamic image with 66MB of data, the bzip2'ed image
file size is only 874 bytes.
This also adds in the IMGFMT_GENERIC flag, so r/o images can be
tested (e.g. ./check -vhdx) without failing tests that assume
r/w support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/064 | 62 +++++++++++++++++++++
tests/qemu-iotests/064.out | 14 +++++
tests/qemu-iotests/common | 8 +++
tests/qemu-iotests/common.rc | 2 +-
tests/qemu-iotests/group | 1 +
.../sample_images/iotest-dynamic-1G.vhdx.bz2 | Bin 0 -> 874 bytes
6 files changed, 86 insertions(+), 1 deletion(-)
create mode 100755 tests/qemu-iotests/064
create mode 100644 tests/qemu-iotests/064.out
create mode 100644 tests/qemu-iotests/sample_images/iotest-dynamic-1G.vhdx.bz2
diff --git a/tests/qemu-iotests/064 b/tests/qemu-iotests/064
new file mode 100755
index 0000000..6789aa6
--- /dev/null
+++ b/tests/qemu-iotests/064
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Test VHDX read/write from a sample image created with Hyper-V
+#
+# Copyright (C) 2013 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=jcody@redhat.com
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt vhdx
+_supported_proto generic
+_supported_os Linux
+
+_use_sample_img iotest-dynamic-1G.vhdx.bz2
+
+echo
+echo "=== Verify pattern 0xa5, 0 - 33MB ==="
+$QEMU_IO -r -c "read -pP 0xa5 0 33M" "$TEST_IMG" | _filter_qemu_io
+
+echo
+echo "=== Verify pattern 0x96, 33M - 66M ==="
+$QEMU_IO -r -c "read -pP 0x96 33M 33M" "$TEST_IMG" | _filter_qemu_io
+
+echo
+echo "=== Verify pattern 0x00, 66M - 1024M ==="
+$QEMU_IO -r -c "read -pP 0x00 66M 958M" "$TEST_IMG" | _filter_qemu_io
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
diff --git a/tests/qemu-iotests/064.out b/tests/qemu-iotests/064.out
new file mode 100644
index 0000000..b9e8e4a
--- /dev/null
+++ b/tests/qemu-iotests/064.out
@@ -0,0 +1,14 @@
+QA output created by 064
+
+=== Verify pattern 0xa5, 0 - 33MB ===
+read 34603008/34603008 bytes at offset 0
+33 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+=== Verify pattern 0x96, 33M - 66M ===
+read 34603008/34603008 bytes at offset 34603008
+33 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+=== Verify pattern 0x00, 66M - 1024M ===
+read 1004535808/1004535808 bytes at offset 69206016
+958 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+*** done
diff --git a/tests/qemu-iotests/common b/tests/qemu-iotests/common
index fecaf85..2932e14 100644
--- a/tests/qemu-iotests/common
+++ b/tests/qemu-iotests/common
@@ -45,6 +45,7 @@ valgrind=false
rm -f $tmp.list $tmp.tmp $tmp.sed
export IMGFMT=raw
+export IMGFMT_GENERIC=true
export IMGPROTO=file
export IMGOPTS=""
export QEMU_IO_OPTIONS=""
@@ -133,6 +134,7 @@ check options
-qed test qed
-vdi test vdi
-vpc test vpc
+ -vhdx test vhdx
-vmdk test vmdk
-rbd test rbd
-sheepdog test sheepdog
@@ -195,6 +197,12 @@ testlist options
xpand=false
;;
+ -vhdx)
+ IMGFMT=vhdx
+ xpand=false
+ IMGFMT_GENERIC=false
+ ;;
+
-rbd)
IMGPROTO=rbd
xpand=false
diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index 227c003..4e82604 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -339,7 +339,7 @@ _fail()
_supported_fmt()
{
for f; do
- if [ "$f" = "$IMGFMT" -o "$f" = "generic" ]; then
+ if [ "$f" = "$IMGFMT" -o "$f" = "generic" -a "$IMGFMT_GENERIC" = "true" ]; then
return
fi
done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index 9c94d14..514bd87 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -69,5 +69,6 @@
061 rw auto
062 rw auto
063 rw auto
+064 rw auto
065 rw auto
066 rw auto
diff --git a/tests/qemu-iotests/sample_images/iotest-dynamic-1G.vhdx.bz2 b/tests/qemu-iotests/sample_images/iotest-dynamic-1G.vhdx.bz2
new file mode 100644
index 0000000000000000000000000000000000000000..77d97a0bae2e45b84ad489a77788084cc09331e0
GIT binary patch
literal 874
zcmV-w1C{(jT4*^jL0KkKS)@Vdf&hZIfB*mY_ijz2|NMXYGlTE%z2+coecwBIyV?7?
zRYF<0^&db2mkJrM&`P9@s2TtO0000000001paz-%27#ae0017K&}e8HN-(1kVrigg
z13&{nXwU!#fB~QY0000000001pg_pcpwKcJX_G+7gwSGQGHB2;7>oqbhyZB84Gbd_
zCQULjF*ML*U`z^<ku<01QIpj3N(ZFK)6~-=)Mx+=JwOB0G|{FZpglkU8fXAC(dh%q
zHq|us0A%$&Lxl0c7NkVLFGMRq07UW*2)3emj1{>kK$s^jUBKR?z~CteOe$Qc!=`MK
zpppgLEo&~>A_R+6h=@Ddl1ZgN7+7*hWL09_s<d&+mMmjjw<LrCx2PjFk~{@nV^|kz
z6;cuaQLw8m>{bL}swE6xrU?On8VxK`u45pSB}p6^9?4@FBo_q60jNQ8)7nwfo~p{X
z21&Hu-QCr>IEs=a0NK%&p{HE(oeD(TehV85d6fuURBs<`t5K&|m^Maoo0fjdi=f}{
z>E$yWvA4r~wZiNcLm<7lTF>T|a9Q1JFM7G$o)?hwxePeOZq}`A`za=Z)W^WEd#*Qp
z#kZ!X0!i<$>Ta+f8L@u+=r$sPWWhg>cfbk7O*y(bhdvqNE8G<%ccZNIDKSnW9b)lr
z?+BB(@#_SGMX@o$bqc@{OqyW;7?h|wi9+N-4D|@7-dVn6g4ihCM|pt2A}N5VGk<5?
z{FoRKTsV)8P`B0_=}2A^fU(eP{;OfF)7siztdO#@z6*HnA0O+ly16Hl#BjL02H~Lm
zU#o1s*F84YWNZGN7x>n4q>?0voA1&{kdPzmvi42q4UHtuzRJ>PzbPk0x?j$@OjIC3
z291dl2@(l)mGJeNMy5-7djC|iYdFpGgRa2BeV-I!Lj_~=H)^bLy>S7`E*Kbz7L6m%
z!pI?M^X|&xFCh=b`Ky@r+f7T@9xGSDdF)KJ&1d`VHFb7cxH1v|W<-)Ch@CnRAp<+?
z+_Yc$iVDdxn#!(cW8fGi)&T|p2nYZGK>!1RnrIY~H<Tz)=_E*(j#5Pu)m2EUIYNaE
zB#I@zVuG?vrm|0*DoOy!8h{0W000C45I_K7m<m%&lp-yPP>8%;$rRy2Ky^V+T-`Z@
A&j0`b
literal 0
HcmV?d00001
--
1.8.1.4
next prev parent reply other threads:[~2013-10-11 15:06 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-11 15:04 [Qemu-devel] [PULL 00/61] Block patches Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 01/61] blockjob: rename BlockJobType to BlockJobDriver Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 02/61] qapi: Introduce enum BlockJobType Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 03/61] qapi: make use of new BlockJobType Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 04/61] qapi: Add ImageInfoSpecific type Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 05/61] block: Add bdrv_get_specific_info Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 06/61] block/qapi: Human-readable ImageInfoSpecific dump Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 07/61] qcow2: Add support for ImageInfoSpecific Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 08/61] qemu-iotests: Discard specific info in _img_info Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 09/61] qemu-iotests: Additional info from qemu-img info Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 10/61] qcow2: Alignment of snapshot table entries Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 11/61] qcow2: Use pread for inactive L1 in overlap check Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 12/61] qcow2: Free preallocated zero clusters Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 13/61] qcow2: Always use error path on writing snapshots Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 14/61] qcow2: Free allocated snapshot table on error Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 15/61] qcow2: Assert against snapshot name/ID overflow Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 16/61] block/get_block_status: avoid redundant callouts on raw devices Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 17/61] block: Add BlockDriver.bdrv_check_ext_snapshot Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 18/61] qemu-iotests: Discard preallocated zero clusters Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 19/61] ahci: set ahci mode on reset Kevin Wolf
2013-10-11 15:05 ` Kevin Wolf [this message]
2013-10-11 15:05 ` [Qemu-devel] [PULL 21/61] qcow2: Add missing space in error message Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 22/61] qcow2: Remove wrong metadata overlap check Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 23/61] qcow2: Fix snapshot restoration in snapshot_create Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 24/61] qcow2: Use better type for numerical snapshot ID Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 25/61] block: Improve driver whitelist checks Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 26/61] qcow2: Use negated overflow check mask Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 27/61] qcow2: Make overlap check mask variable Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 28/61] qcow2: Add overlap-check options Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 29/61] qcow2: Array assigning options to OL check bits Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 30/61] qcow2: Add more overlap check bitmask macros Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 31/61] qcow2: Evaluate overlap check options Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 32/61] block/raw_bsd: Employ error parameter Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 33/61] block/raw-win32: " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 34/61] blkdebug: " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 35/61] blkverify: " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 36/61] qemu-iotests: move blank lines of output in case 059 Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 37/61] block/raw-posix: Employ error parameter Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 38/61] tests: build the helper program by default Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 39/61] build: add command check-clean Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 40/61] vmdk: convert error code to use errp Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 41/61] vmdk: refuse enabling zeroed grain with flat images Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 42/61] qapi-types/visit.py: Pass whole expr dict for structs Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 43/61] qapi-types/visit.py: Inheritance " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 44/61] blockdev: Introduce DriveInfo.enable_auto_del Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 45/61] blockdev: 'blockdev-add' QMP command Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 46/61] blockdev: Separate ID generation from DriveInfo creation Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 47/61] blockdev: Pass QDict to blockdev_init() Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 48/61] blockdev: Move parsing of 'media' option to drive_init Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 49/61] blockdev: Move parsing of 'if' " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 50/61] blockdev: Moving parsing of geometry options " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 51/61] blockdev: Move parsing of 'boot' option " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 52/61] blockdev: Move bus/unit/index processing " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 53/61] blockdev: Move virtio-blk device creation " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 54/61] blockdev: Remove IF_* check for read-only blockdev_init Kevin Wolf
2013-10-15 15:53 ` Stefan Weil
2013-10-15 15:59 ` Kevin Wolf
2013-10-15 16:02 ` Stefan Weil
2013-10-11 15:05 ` [Qemu-devel] [PULL 55/61] qemu-iotests: Check autodel behaviour for device_del Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 56/61] blockdev: Remove 'media' parameter from blockdev_init() Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 57/61] blockdev: Don't disable COR automatically with blockdev-add Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 58/61] blockdev: blockdev_init() error conversion Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 59/61] vmdk: Fix vmdk_parse_extents Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 60/61] qemu-io: Let "open" pass options to block driver Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 61/61] qemu-iotests: Add test for inactive L2 overlap Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381503951-27985-21-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).