qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 58/61] blockdev: blockdev_init() error conversion
Date: Fri, 11 Oct 2013 17:05:48 +0200	[thread overview]
Message-ID: <1381503951-27985-59-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1381503951-27985-1-git-send-email-kwolf@redhat.com>

This gives us meaningful error messages for the blockdev-add QMP
command.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 blockdev.c | 56 +++++++++++++++++++++++++++++++-------------------------
 1 file changed, 31 insertions(+), 25 deletions(-)

diff --git a/blockdev.c b/blockdev.c
index 1f14514..4f76e28 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -272,7 +272,7 @@ static void bdrv_put_ref_bh_schedule(BlockDriverState *bs)
     qemu_bh_schedule(s->bh);
 }
 
-static int parse_block_error_action(const char *buf, bool is_read)
+static int parse_block_error_action(const char *buf, bool is_read, Error **errp)
 {
     if (!strcmp(buf, "ignore")) {
         return BLOCKDEV_ON_ERROR_IGNORE;
@@ -283,8 +283,8 @@ static int parse_block_error_action(const char *buf, bool is_read)
     } else if (!strcmp(buf, "report")) {
         return BLOCKDEV_ON_ERROR_REPORT;
     } else {
-        error_report("'%s' invalid %s error action",
-                     buf, is_read ? "read" : "write");
+        error_setg(errp, "'%s' invalid %s error action",
+                   buf, is_read ? "read" : "write");
         return -1;
     }
 }
@@ -309,7 +309,8 @@ typedef enum { MEDIA_DISK, MEDIA_CDROM } DriveMediaType;
 
 /* Takes the ownership of bs_opts */
 static DriveInfo *blockdev_init(QDict *bs_opts,
-                                BlockInterfaceType type)
+                                BlockInterfaceType type,
+                                Error **errp)
 {
     const char *buf;
     const char *file = NULL;
@@ -333,15 +334,13 @@ static DriveInfo *blockdev_init(QDict *bs_opts,
     id = qdict_get_try_str(bs_opts, "id");
     opts = qemu_opts_create(&qemu_common_drive_opts, id, 1, &error);
     if (error_is_set(&error)) {
-        qerror_report_err(error);
-        error_free(error);
+        error_propagate(errp, error);
         return NULL;
     }
 
     qemu_opts_absorb_qdict(opts, bs_opts, &error);
     if (error_is_set(&error)) {
-        qerror_report_err(error);
-        error_free(error);
+        error_propagate(errp, error);
         return NULL;
     }
 
@@ -361,7 +360,7 @@ static DriveInfo *blockdev_init(QDict *bs_opts,
 
     if ((buf = qemu_opt_get(opts, "discard")) != NULL) {
         if (bdrv_parse_discard_flags(buf, &bdrv_flags) != 0) {
-            error_report("invalid discard option");
+            error_setg(errp, "invalid discard option");
             return NULL;
         }
     }
@@ -383,7 +382,7 @@ static DriveInfo *blockdev_init(QDict *bs_opts,
         } else if (!strcmp(buf, "threads")) {
             /* this is the default */
         } else {
-           error_report("invalid aio option");
+           error_setg(errp, "invalid aio option");
            return NULL;
         }
     }
@@ -399,7 +398,7 @@ static DriveInfo *blockdev_init(QDict *bs_opts,
 
         drv = bdrv_find_format(buf);
         if (!drv) {
-            error_report("'%s' invalid format", buf);
+            error_setg(errp, "'%s' invalid format", buf);
             return NULL;
         }
     }
@@ -435,20 +434,20 @@ static DriveInfo *blockdev_init(QDict *bs_opts,
     cfg.op_size = qemu_opt_get_number(opts, "throttling.iops-size", 0);
 
     if (!check_throttle_config(&cfg, &error)) {
-        error_report("%s", error_get_pretty(error));
-        error_free(error);
+        error_propagate(errp, error);
         return NULL;
     }
 
     on_write_error = BLOCKDEV_ON_ERROR_ENOSPC;
     if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
         if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type != IF_NONE) {
-            error_report("werror is not supported by this bus type");
+            error_setg(errp, "werror is not supported by this bus type");
             return NULL;
         }
 
-        on_write_error = parse_block_error_action(buf, 0);
-        if (on_write_error < 0) {
+        on_write_error = parse_block_error_action(buf, 0, &error);
+        if (error_is_set(&error)) {
+            error_propagate(errp, error);
             return NULL;
         }
     }
@@ -460,8 +459,9 @@ static DriveInfo *blockdev_init(QDict *bs_opts,
             return NULL;
         }
 
-        on_read_error = parse_block_error_action(buf, 1);
-        if (on_read_error < 0) {
+        on_read_error = parse_block_error_action(buf, 1, &error);
+        if (error_is_set(&error)) {
+            error_propagate(errp, error);
             return NULL;
         }
     }
@@ -514,8 +514,9 @@ static DriveInfo *blockdev_init(QDict *bs_opts,
     ret = bdrv_open(dinfo->bdrv, file, bs_opts, bdrv_flags, drv, &error);
 
     if (ret < 0) {
-        error_report("could not open disk image %s: %s",
-                     file ?: dinfo->id, error_get_pretty(error));
+        error_setg(errp, "could not open disk image %s: %s",
+                   file ?: dinfo->id, error_get_pretty(error));
+        error_free(error);
         goto err;
     }
 
@@ -862,9 +863,15 @@ DriveInfo *drive_init(QemuOpts *all_opts, BlockInterfaceType block_default_type)
     }
 
     /* Actual block device init: Functionality shared with blockdev-add */
-    dinfo = blockdev_init(bs_opts, type);
+    dinfo = blockdev_init(bs_opts, type, &local_err);
     if (dinfo == NULL) {
+        if (error_is_set(&local_err)) {
+            qerror_report_err(local_err);
+            error_free(local_err);
+        }
         goto fail;
+    } else {
+        assert(!error_is_set(&local_err));
     }
 
     /* Set legacy DriveInfo fields */
@@ -2155,7 +2162,6 @@ void qmp_blockdev_add(BlockdevOptions *options, Error **errp)
     QmpOutputVisitor *ov = qmp_output_visitor_new();
     QObject *obj;
     QDict *qdict;
-    DriveInfo *dinfo;
     Error *local_err = NULL;
 
     /* Require an ID in the top level */
@@ -2189,9 +2195,9 @@ void qmp_blockdev_add(BlockdevOptions *options, Error **errp)
 
     qdict_flatten(qdict);
 
-    dinfo = blockdev_init(qdict, IF_NONE);
-    if (!dinfo) {
-        error_setg(errp, "Could not open image");
+    blockdev_init(qdict, IF_NONE, &local_err);
+    if (error_is_set(&local_err)) {
+        error_propagate(errp, local_err);
         goto fail;
     }
 
-- 
1.8.1.4

  parent reply	other threads:[~2013-10-11 15:07 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-11 15:04 [Qemu-devel] [PULL 00/61] Block patches Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 01/61] blockjob: rename BlockJobType to BlockJobDriver Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 02/61] qapi: Introduce enum BlockJobType Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 03/61] qapi: make use of new BlockJobType Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 04/61] qapi: Add ImageInfoSpecific type Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 05/61] block: Add bdrv_get_specific_info Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 06/61] block/qapi: Human-readable ImageInfoSpecific dump Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 07/61] qcow2: Add support for ImageInfoSpecific Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 08/61] qemu-iotests: Discard specific info in _img_info Kevin Wolf
2013-10-11 15:04 ` [Qemu-devel] [PULL 09/61] qemu-iotests: Additional info from qemu-img info Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 10/61] qcow2: Alignment of snapshot table entries Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 11/61] qcow2: Use pread for inactive L1 in overlap check Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 12/61] qcow2: Free preallocated zero clusters Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 13/61] qcow2: Always use error path on writing snapshots Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 14/61] qcow2: Free allocated snapshot table on error Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 15/61] qcow2: Assert against snapshot name/ID overflow Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 16/61] block/get_block_status: avoid redundant callouts on raw devices Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 17/61] block: Add BlockDriver.bdrv_check_ext_snapshot Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 18/61] qemu-iotests: Discard preallocated zero clusters Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 19/61] ahci: set ahci mode on reset Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 20/61] block: qemu-iotests for vhdx, read sample dynamic image Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 21/61] qcow2: Add missing space in error message Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 22/61] qcow2: Remove wrong metadata overlap check Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 23/61] qcow2: Fix snapshot restoration in snapshot_create Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 24/61] qcow2: Use better type for numerical snapshot ID Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 25/61] block: Improve driver whitelist checks Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 26/61] qcow2: Use negated overflow check mask Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 27/61] qcow2: Make overlap check mask variable Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 28/61] qcow2: Add overlap-check options Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 29/61] qcow2: Array assigning options to OL check bits Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 30/61] qcow2: Add more overlap check bitmask macros Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 31/61] qcow2: Evaluate overlap check options Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 32/61] block/raw_bsd: Employ error parameter Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 33/61] block/raw-win32: " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 34/61] blkdebug: " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 35/61] blkverify: " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 36/61] qemu-iotests: move blank lines of output in case 059 Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 37/61] block/raw-posix: Employ error parameter Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 38/61] tests: build the helper program by default Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 39/61] build: add command check-clean Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 40/61] vmdk: convert error code to use errp Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 41/61] vmdk: refuse enabling zeroed grain with flat images Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 42/61] qapi-types/visit.py: Pass whole expr dict for structs Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 43/61] qapi-types/visit.py: Inheritance " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 44/61] blockdev: Introduce DriveInfo.enable_auto_del Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 45/61] blockdev: 'blockdev-add' QMP command Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 46/61] blockdev: Separate ID generation from DriveInfo creation Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 47/61] blockdev: Pass QDict to blockdev_init() Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 48/61] blockdev: Move parsing of 'media' option to drive_init Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 49/61] blockdev: Move parsing of 'if' " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 50/61] blockdev: Moving parsing of geometry options " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 51/61] blockdev: Move parsing of 'boot' option " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 52/61] blockdev: Move bus/unit/index processing " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 53/61] blockdev: Move virtio-blk device creation " Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 54/61] blockdev: Remove IF_* check for read-only blockdev_init Kevin Wolf
2013-10-15 15:53   ` Stefan Weil
2013-10-15 15:59     ` Kevin Wolf
2013-10-15 16:02       ` Stefan Weil
2013-10-11 15:05 ` [Qemu-devel] [PULL 55/61] qemu-iotests: Check autodel behaviour for device_del Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 56/61] blockdev: Remove 'media' parameter from blockdev_init() Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 57/61] blockdev: Don't disable COR automatically with blockdev-add Kevin Wolf
2013-10-11 15:05 ` Kevin Wolf [this message]
2013-10-11 15:05 ` [Qemu-devel] [PULL 59/61] vmdk: Fix vmdk_parse_extents Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 60/61] qemu-io: Let "open" pass options to block driver Kevin Wolf
2013-10-11 15:05 ` [Qemu-devel] [PULL 61/61] qemu-iotests: Add test for inactive L2 overlap Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1381503951-27985-59-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).