qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org, Anthony Liguori <anthony@codemonkey.ws>
Cc: peter.maydell@linaro.org, imammedo@redhat.com, mst@redhat.com,
	kraxel@redhat.com, marcel.a@redhat.com
Subject: [Qemu-devel] [PULL 05/43] hw/pci: add pci wrappers for allocating and asserting irqs
Date: Mon, 14 Oct 2013 17:58:06 +0300	[thread overview]
Message-ID: <1381762577-12526-6-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1381762577-12526-1-git-send-email-mst@redhat.com>

From: Marcel Apfelbaum <marcel.a@redhat.com>

Interrupt pin is selected and saved into PCI_INTERRUPT_PIN
register during device initialization. Devices should not call
directly qemu_set_irq and specify the INTx pin on each call.

Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise,
qemu_irq_lower and qemu_irq_pulse, setting the irq
based on PCI_INTERRUPT_PIN.

Added pci_allocate_irq wrapper to be used by devices that
still need PCIDevice infrastructure to assert irqs.

Renamed a static method which was named already pci_set_irq.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/pci/pci.h | 23 +++++++++++++++++++++++
 hw/pci/pci.c         | 26 ++++++++++++++++++++++----
 2 files changed, 45 insertions(+), 4 deletions(-)

diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index 4b90e5d..990342c 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -632,6 +632,29 @@ PCIDevice *pci_create_simple_multifunction(PCIBus *bus, int devfn,
 PCIDevice *pci_create(PCIBus *bus, int devfn, const char *name);
 PCIDevice *pci_create_simple(PCIBus *bus, int devfn, const char *name);
 
+qemu_irq pci_allocate_irq(PCIDevice *pci_dev);
+void pci_set_irq(PCIDevice *pci_dev, int level);
+
+static inline void pci_irq_assert(PCIDevice *pci_dev)
+{
+    pci_set_irq(pci_dev, 1);
+}
+
+static inline void pci_irq_deassert(PCIDevice *pci_dev)
+{
+    pci_set_irq(pci_dev, 0);
+}
+
+/*
+ * FIXME: PCI does not work this way.
+ * All the callers to this method should be fixed.
+ */
+static inline void pci_irq_pulse(PCIDevice *pci_dev)
+{
+    pci_irq_assert(pci_dev);
+    pci_irq_deassert(pci_dev);
+}
+
 static inline int pci_is_express(const PCIDevice *d)
 {
     return d->cap_present & QEMU_PCI_CAP_EXPRESS;
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 25626b8..ff4b697 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -83,7 +83,7 @@ static const TypeInfo pcie_bus_info = {
 
 static PCIBus *pci_find_bus_nr(PCIBus *bus, int bus_num);
 static void pci_update_mappings(PCIDevice *d);
-static void pci_set_irq(void *opaque, int irq_num, int level);
+static void pci_irq_handler(void *opaque, int irq_num, int level);
 static int pci_add_option_rom(PCIDevice *pdev, bool is_default_rom);
 static void pci_del_option_rom(PCIDevice *pdev);
 
@@ -161,7 +161,7 @@ void pci_device_deassert_intx(PCIDevice *dev)
 {
     int i;
     for (i = 0; i < PCI_NUM_PINS; ++i) {
-        qemu_set_irq(dev->irq[i], 0);
+        pci_irq_handler(dev, i, 0);
     }
 }
 
@@ -889,7 +889,7 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus,
     pci_dev->config_read = config_read;
     pci_dev->config_write = config_write;
     bus->devices[devfn] = pci_dev;
-    pci_dev->irq = qemu_allocate_irqs(pci_set_irq, pci_dev, PCI_NUM_PINS);
+    pci_dev->irq = qemu_allocate_irqs(pci_irq_handler, pci_dev, PCI_NUM_PINS);
     pci_dev->version_id = 2; /* Current pci device vmstate version */
     return pci_dev;
 }
@@ -1201,7 +1201,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
 /* generic PCI irq support */
 
 /* 0 <= irq_num <= 3. level must be 0 or 1 */
-static void pci_set_irq(void *opaque, int irq_num, int level)
+static void pci_irq_handler(void *opaque, int irq_num, int level)
 {
     PCIDevice *pci_dev = opaque;
     int change;
@@ -1217,6 +1217,24 @@ static void pci_set_irq(void *opaque, int irq_num, int level)
     pci_change_irq_level(pci_dev, irq_num, change);
 }
 
+static inline int pci_intx(PCIDevice *pci_dev)
+{
+    return pci_get_byte(pci_dev->config + PCI_INTERRUPT_PIN) - 1;
+}
+
+qemu_irq pci_allocate_irq(PCIDevice *pci_dev)
+{
+    int intx = pci_intx(pci_dev);
+
+    return qemu_allocate_irq(pci_irq_handler, pci_dev, intx);
+}
+
+void pci_set_irq(PCIDevice *pci_dev, int level)
+{
+    int intx = pci_intx(pci_dev);
+    pci_irq_handler(pci_dev, intx, level);
+}
+
 /* Special hooks used by device assignment */
 void pci_bus_set_route_irq_fn(PCIBus *bus, pci_route_irq_fn route_intx_to_irq)
 {
-- 
MST

  parent reply	other threads:[~2013-10-14 14:55 UTC|newest]

Thread overview: 100+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-14 14:57 [Qemu-devel] [PULL 00/43] pci, pc, acpi fixes, enhancements Michael S. Tsirkin
2013-10-14 14:57 ` Paolo Bonzini
2013-10-14 15:12   ` Michael S. Tsirkin
2013-10-14 15:21     ` Paolo Bonzini
2013-10-14 14:57 ` [Qemu-devel] [PULL 01/43] memory: Change MemoryRegion priorities from unsigned to signed Michael S. Tsirkin
2013-10-14 14:57 ` [Qemu-devel] [PULL 02/43] docs/memory: Explictly state that MemoryRegion priority is signed Michael S. Tsirkin
2013-10-14 14:57 ` [Qemu-devel] [PULL 03/43] hw/pci: partially handle pci master abort Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 04/43] hw/core: Add interface to allocate and free a single IRQ Michael S. Tsirkin
2013-10-14 14:58 ` Michael S. Tsirkin [this message]
2013-10-14 14:58 ` [Qemu-devel] [PULL 06/43] hw/pci-bridge: set PCI_INTERRUPT_PIN register before shpc init Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 07/43] hw/vmxnet3: set interrupts using pci irq wrappers Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 08/43] hw/vfio: " Michael S. Tsirkin
2013-10-14 15:46   ` Alex Williamson
2013-10-14 14:58 ` [Qemu-devel] [PULL 09/43] hw: " Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 10/43] hw/pcie: AER and hot-plug events must use device's interrupt Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 11/43] hw/pci: removed irq field from PCIDevice Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 12/43] cleanup object.h: include error.h directly Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 13/43] qom: cleanup struct Error references Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 14/43] qom: add pointer to int property helpers Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 15/43] pci: fix up w64 size calculation helper Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 16/43] fw_cfg: interface to trigger callback on read Michael S. Tsirkin
2013-10-14 14:58 ` [Qemu-devel] [PULL 17/43] loader: support for unmapped ROM blobs Michael S. Tsirkin
2013-11-08  0:54   ` Alexander Graf
2013-11-09 17:21     ` Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 18/43] pcie_host: expose UNMAPPED macro Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 19/43] pcie_host: expose address format Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 20/43] q35: use macro for MCFG property name Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 21/43] q35: expose mmcfg size as a property Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 22/43] i386: add ACPI table files from seabios Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 23/43] acpi: add rules to compile ASL source Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 24/43] acpi: pre-compiled ASL files Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 25/43] acpi: ssdt pcihp: updat generated file Michael S. Tsirkin
2013-10-14 22:32   ` Anthony Liguori
2013-10-15  5:24     ` Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 26/43] loader: use file path size from fw_cfg.h Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 27/43] i386: add bios linker/loader Michael S. Tsirkin
2013-10-14 14:59 ` [Qemu-devel] [PULL 28/43] loader: allow adding ROMs in done callbacks Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 29/43] i386: define pc guest info Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 30/43] acpi/piix: add macros for acpi property names Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 31/43] piix: APIs for pc guest info Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 32/43] ich9: " Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 33/43] pvpanic: add API to access io port Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 34/43] hpet: add API to find it Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 35/43] acpi: add interface to access user-installed tables Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 36/43] pc: use new api to add builtin tables Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 37/43] i386: ACPI table generation code from seabios Michael S. Tsirkin
2013-10-14 15:00 ` [Qemu-devel] [PULL 38/43] ssdt: fix PBLK length Michael S. Tsirkin
2013-10-14 15:01 ` [Qemu-devel] [PULL 39/43] ssdt-proc: update generated file Michael S. Tsirkin
2013-10-14 15:01 ` [Qemu-devel] [PULL 40/43] pci: add pci_for_each_bus_depth_first Michael S. Tsirkin
2013-10-14 15:01 ` [Qemu-devel] [PULL 41/43] pcihp: generalization of piix4 acpi Michael S. Tsirkin
2013-10-14 22:36   ` Anthony Liguori
2013-10-15  5:23     ` Michael S. Tsirkin
2013-10-14 15:01 ` [Qemu-devel] [PULL 42/43] piix4: add acpi pci hotplug support Michael S. Tsirkin
2013-10-15 14:31   ` Paolo Bonzini
2013-10-15 14:35     ` Michael S. Tsirkin
2013-10-15 14:50       ` Paolo Bonzini
2013-10-15 14:54         ` Michael S. Tsirkin
2013-10-15 14:54           ` Paolo Bonzini
2013-10-15 15:07             ` Michael S. Tsirkin
2013-10-15 15:09               ` Paolo Bonzini
2013-10-15 15:16                 ` Michael S. Tsirkin
2013-10-15 16:27         ` Anthony Liguori
2013-10-15 20:17           ` Michael S. Tsirkin
2013-10-16 15:03             ` Paolo Bonzini
2013-10-16 16:38             ` Anthony Liguori
2013-10-16 18:18               ` Michael S. Tsirkin
2013-10-16 18:18                 ` Anthony Liguori
2013-10-16 18:37                   ` Michael S. Tsirkin
2013-10-16 21:26                     ` Paolo Bonzini
2013-10-16 22:03                       ` Michael S. Tsirkin
2013-10-16 22:25                         ` Paolo Bonzini
2013-10-16 23:52                           ` Anthony Liguori
2013-10-17  5:22                             ` Michael S. Tsirkin
2013-10-17  5:32                           ` Michael S. Tsirkin
2013-10-17  5:48                             ` Gleb Natapov
2013-10-17  5:34                           ` Michael S. Tsirkin
2013-10-17 11:06                             ` Paolo Bonzini
2013-10-17  8:18                     ` Gerd Hoffmann
2013-12-10 11:15   ` Igor Mammedov
2013-10-14 15:01 ` [Qemu-devel] [PULL 43/43] acpi-build: enable hotplug for PCI bridges Michael S. Tsirkin
2013-10-14 22:42 ` [Qemu-devel] [PULL 00/43] pci, pc, acpi fixes, enhancements Anthony Liguori
2013-10-15  5:28   ` Michael S. Tsirkin
2013-10-15 13:51     ` Anthony Liguori
2013-10-15 14:01       ` Paolo Bonzini
2013-10-15 14:17         ` Anthony Liguori
2013-10-15 14:24           ` Michael S. Tsirkin
2013-10-15 14:09       ` Igor Mammedov
2013-10-15 14:20       ` Michael S. Tsirkin
2013-10-15 14:21         ` Anthony Liguori
2013-10-15 14:30           ` Michael S. Tsirkin
2013-10-15 14:37           ` Michael S. Tsirkin
2013-10-15 14:51           ` Michael S. Tsirkin
2013-10-15 15:27             ` Igor Mammedov
2013-10-15 15:37             ` Michael S. Tsirkin
2013-10-15  5:33   ` Michael S. Tsirkin
2013-10-15 11:53   ` Igor Mammedov
2013-10-15 13:43   ` Gerd Hoffmann
2013-10-15 13:53     ` Anthony Liguori
2013-10-15 14:21       ` Michael S. Tsirkin
2013-10-15 14:14   ` Gerd Hoffmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1381762577-12526-6-git-send-email-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=imammedo@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=marcel.a@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).